An RCA Inner sleeve from c.1970 touts the superiority of Dynaflex records.
Dynaflex is a trademark for a thin, lightweight vinylLPphonograph record introduced by RCA Records in late 1969. Rather than using the stiff plastic material used by conventional vinyl pressings, Dynaflex records used a softer, pliable formulation that allowed RCA to use less material, saving money and also making the record appear to lie flatter on turntables. At the time, as a cost-cutting measure, most industry record pressing plants were using recycled or "reground" vinyl, taking old and unsold records, cutting out the center with the paper labels, then melting the rest down and reusing the material to make new records. Such "reground" vinyl records typically sounded much noisier and scratchier when played than a record made from new or "virgin" vinyl; collectors noted that records pressed from "reground" vinyl sometimes had small remnants of paper labels or other materials embedded in them.
RCA's Dynaflex records varied somewhat in thickness, but most literally "flopped" back and forth when held between the hands. Some were so thin and flexible they could actually be bent nearly in half. This flexibility also gave them theoretically more resiliency in shipping, resulting in fewer returns from retailers due to breakage and cracks.
Opinions from record collectors and audiophiles are divided as to the sound quality of Dynaflex records. Some felt that the sound quality actually improved, due to the purer vinyl used, and better processes for removing impurities in the vinyl compounds; others felt that Dynaflex pressings were noisier and lacked bass frequencies compared to conventional records, and also had more "rumble" (low frequency noise) than conventional records. While RCA claimed that Dynaflex records were less noisy and less susceptible to warpage and would last longer than conventional vinyl records, some consumers (particularly classical listeners) derisively referred to the new product as 'Dynawarp' because of evidence that Dynaflex records were prone to warp on dealers' shelves, just from the pressure of the shrinkwrap on the album jacket. Some critics charged that Dynaflex was nothing more than a ploy devised by RCA to save money by using less vinyl than in traditional, thicker records.
RCA Records apparently never fully implemented the use of Dynaflex, as regular thicker vinyl records continued to be manufactured; many titles issued by RCA were available in both Dynaflex and heavier vinyl pressings. Around 1974–75, RCA began to gradually reduce the number of Dynaflex records being manufactured and, by the end of the decade, Dynaflex had been discontinued entirely.
Related Research Articles
A loudspeaker is a combination of one or more speaker drivers, an enclosure, and electrical connections. The speaker driver is an electroacoustic transducer that converts an electrical audio signal into a corresponding sound.
A phonograph record or a vinyl record is an analog sound storage medium in the form of a flat disc with an inscribed, modulated spiral groove. The groove usually starts near the outside edge and ends near the center of the disc. The stored sound information is made audible by playing the record on a phonograph.
RCA Records is an American record label. Since 2008, it has been owned by Sony Music Entertainment, a subsidiary of Sony Group Corporation.
Mastering, a form of audio post production, is the process of preparing and transferring recorded audio from a source containing the final mix to a data storage device, the source from which all copies will be produced. In recent years, digital masters have become usual, although analog masters—such as audio tapes—are still being used by the manufacturing industry, particularly by a few engineers who specialize in analog mastering.
Medium-density fibreboard (MDF) is an engineered wood product made by breaking down hardwood or softwood residuals into wood fibre, often in a defibrator, combining it with wax and a resin binder, and forming it into panels by applying high temperature and pressure. MDF is generally denser than plywood. It is made up of separated fibre but can be used as a building material similar in application to plywood. It is stronger and denser than particle board.
The twelve-inch single is a type of vinyl gramophone record that has wider groove spacing and shorter playing time with a "single" or a few related sound tracks on each surface, compared to LPs which have several songs on each side. It is named for its 12-inch (300 mm) diameter that was intended for LPs. This technical adaptation allows for louder levels to be cut on the disc by the mastering engineer, which in turn gives a wider dynamic range, and thus better sound quality. This record type, which is claimed to have been accidentally discovered by Tom Moulton, is commonly used in disco and dance music genres, where DJs use them to play in clubs. They are played at either 33+1⁄3 or 45 rpm. The conventional 7-inch single usually holds three or four minutes of music at full volume. The 12-inch LP sacrifices volume for extended playing time.
An acetate disc is a type of phonograph record generally used from the 1930s to the late 1950s for recording and broadcast purposes. Despite their name, "acetate" discs do not contain any acetate.
The overwhelming majority of records manufactured have been of certain sizes, playback speeds, and appearance. However, since the commercial adoption of the gramophone record, a wide variety of records have also been produced that do not fall into these categories, and they have served a variety of purposes.
Picture discs are gramophone (phonograph) records that show images on their playing surface, rather than being of plain black or colored vinyl. Collectors traditionally reserve the term picture disc for records with graphics that extend at least partly into the actual playable grooved area, distinguishing them from picture label discs, which have a specially illustrated and sometimes very large label, and picture back discs, which are illustrated on one unplayable side only.
Plasma cutting is a process that cuts through electrically conductive materials by means of an accelerated jet of hot plasma. Typical materials cut with a plasma torch include steel, stainless steel, aluminum, brass and copper, although other conductive metals may be cut as well. Plasma cutting is often used in fabrication shops, automotive repair and restoration, industrial construction, and salvage and scrapping operations. Due to the high speed and precision cuts combined with low cost, plasma cutting sees widespread use from large-scale industrial computer numerical control (CNC) applications down to small hobbyist shops.
Record collecting is the hobby of collecting sound recordings, usually of music, but sometimes poetry, reading, historical speeches, and ambient noises. Although the typical focus is on vinyl records, all formats of recorded music can be collected.
Sound recording and reproduction is the electrical, mechanical, electronic, or digital inscription and re-creation of sound waves, such as spoken voice, singing, instrumental music, or sound effects. The two main classes of sound recording technology are analog recording and digital recording.
A matrix number is an alphanumeric code stamped or handwritten into the run-out groove area of a phonograph record. This is the non-grooved area between the end of the final band on a record's side and the label, also known as the run-off groove area, end-groove area, matrix area, or "dead wax".
The LP is an analog sound storage medium, specifically a phonograph record format characterized by: a speed of 33+1⁄3 rpm; a 12- or 10-inch diameter; use of the "microgroove" groove specification; and a vinyl composition disk. Introduced by Columbia Records in 1948, it was soon adopted as a new standard by the entire US record industry and, apart from a few relatively minor refinements and the important later addition of stereophonic sound in 1957, it remained the standard format for record albums during a period in popular music known as the album era. LP was originally a trademark of Columbia and competed against the smaller 7-inch sized "45" or "single" format by RCA Victor, eventually ending up on top. Today in the vinyl revival era, a large majority of records are based on the LP format and hence the LP name continues to be in use today to refer to new records.
Teldec is a German record label in Hamburg, Germany. Today the label is a property of Warner Music Group.
Direct metal mastering (DMM) is an analog audio disc mastering technique jointly developed by two German companies, Telefunken-Decca (Teldec) and Georg Neumann GmbH, toward the end of the 20th century after having seen the same technology used by RCA Princeton Labs for its SelectaVision videodiscs in the late 1970s.
In the production of phonograph records – discs that were commonly made of shellac, and later, vinyl – sound was recorded directly onto a master disc at the recording studio. From about 1950 on it became usual to have the performance first recorded on audio tape, which could then be processed and/or edited, and then dubbed on to the master disc.
David Richardson is an English music producer, audio engineer and musician. He founded Sky Studios with rock band Jethro Tull, the studio later became leading facilities house, Sound Recording Technology (SRT).
Electrical transcriptions are special phonograph recordings made exclusively for radio broadcasting, which were widely used during the "Golden Age of Radio". They provided material—from station-identification jingles and commercials to full-length programs—for use by local stations, which were affiliates of one of the radio networks.
Amorphous silicon (a-Si) is the non-crystalline form of silicon used for solar cells and thin-film transistors in LCDs.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
