Electronic serial number

Last updated

Electronic serial numbers (ESNs) were created by the U.S. Federal Communications Commission (FCC) to uniquely identify mobile devices, from the days of AMPS in the United States starting in the early 1980s. The administrative role was taken over by the Telecommunications Industry Association in 1997 and is still maintained by them. ESNs are currently mainly used with CDMA phones (and were previously used by AMPS and TDMA phones), compared to International Mobile Equipment Identity (IMEI) numbers used by all GSM phones. [1]

The first eight bits of the ESN were originally the manufacturer code, leaving 24 bits for the manufacturer to assign up to 16,777,215 codes to mobiles. To allow more than 256 manufacturers to be identified, the manufacturer code was extended to 14 bits, leaving 18 bits for the manufacturer to assign up to 262,144 codes. Manufacturer code 0x80 is reserved from assignment and is used instead as an eight-bit prefix for pseudo-ESNs (pESN). The remaining 24 bits are the least significant bits of the SHA-1 hash of a mobile equipment identifier (MEID). Pseudo-ESNs are not guaranteed to be unique (the MEID is the unique identifier if the phone has a pseudo-ESN).

ESNs are often represented as either 11-digit decimal numbers or 8-digit hexadecimal numbers. For the decimal format the first three digits are the decimal representation of the first eight bits (between 00 and 255 inclusive) and the next eight digits are derived from the remaining 24 bits and will be between 0000000 and 16777215 inclusive. The decimal format of pseudo ESNs will therefore begin with 128. The decimal format separately displays eight bit manufacturer codes in the first three digits, but 14 bit codes are not displayed as separate digits. The hexadecimal format displays an ESN as eight digits and also does not separately display 14 bit manufacturer codes which occupy 3.5 hexadecimal digits.

As ESNs have essentially run out, a new serial number format, MEID, was created by 3GPP2 and was first implemented by Verizon in 2006. MEIDs are 56 bits long, the same length as the IMEI and, in fact, MEID was created to be a superset of IMEI. The main difference between MEID and IMEI is that the MEID allows hexadecimal digits while IMEI allows only decimal digits – "IMEI shall consist of decimal digits (0 through 9) only". [2]

The last of the previously unused ESN codes were allocated in November 2008. [3] Applications for assignments were accepted until June 30, 2010 using reclaimed ESN codes, those previously assigned to AMPS or TDMA phones and therefore not present on CDMA2000 systems. Reclaimed codes have also been used for UIMID assignments. Codes are assigned according to industry guidelines. [4]

Although ESN assignments may still occur in the future based on applications received before June 30, 2010, there have not been any assignments made since December 31, 2010.

Related Research Articles

Advanced Mobile Phone System Analog mobile phone system standard

Advanced Mobile Phone System (AMPS) was an analog mobile phone system standard originally developed by Bell Labs and later modified in a cooperative effort between Bell Labs and Motorola. It was officially introduced in the Americas on October 13, 1983, Israel in 1986, Australia in 1987, Singapore in 1988, and Pakistan in 1990. It was the primary analog mobile phone system in North America through the 1980s and into the 2000s. As of February 18, 2008, carriers in the United States were no longer required to support AMPS and companies such as AT&T and Verizon Communications have discontinued this service permanently. AMPS was discontinued in Australia in September 2000, in Pakistan by October 2004, in Israel by January 2010, and Brazil by 2010.

The international mobile subscriber identity (IMSI) is a number that uniquely identifies every user of a cellular network. It is stored as a 64-bit field and is sent by the mobile device to the network. It is also used for acquiring other details of the mobile in the home location register (HLR) or as locally copied in the visitor location register. To prevent eavesdroppers from identifying and tracking the subscriber on the radio interface, the IMSI is sent as rarely as possible and a randomly-generated TMSI is sent instead.

SIM card Integrated circuit card for a mobile device

A SIM card, is an integrated circuit (IC) intended to securely store the international mobile subscriber identity (IMSI) number and its related key, which are used to identify and authenticate subscribers on mobile telephony devices. Technically the actual physical card is known as a universal integrated circuit card (UICC); this smart card is usually made of PVC with embedded contacts and semiconductors, with the SIM as its primary component. In practice the term "SIM card" refers to the entire unit and not simply the IC.

The International Mobile Equipment Identity (IMEI) is a number, usually unique, to identify 3GPP and iDEN mobile phones, as well as some satellite phones. It is usually found printed inside the battery compartment of the phone but can also be displayed on-screen on most phones by entering *#06# MMI Supplementary Service code on the dialpad, or alongside other system information in the settings menu on smartphone operating systems.

IS-54 and IS-136 are second-generation (2G) mobile phone systems, known as Digital AMPS (D-AMPS), and a further development of the North American 1G mobile system Advanced Mobile Phone System (AMPS). It was once prevalent throughout the Americas, particularly in the United States and Canada since the first commercial network was deployed in 1993. D-AMPS is considered end-of-life, and existing networks have mostly been replaced by GSM/GPRS or CDMA2000 technologies.

MSISDN is a number uniquely identifying a subscription in a Global System for Mobile communications or a Universal Mobile Telecommunications System mobile network. It is the mapping of the telephone number to the subscriber identity module in a mobile or cellular phone. This abbreviation has several interpretations, the most common one being "Mobile Station International Subscriber Directory Number".

The mobile identification number (MIN) or mobile subscription identification number (MSIN) refers to the 10-digit unique number that a wireless carrier uses to identify a mobile phone, which is the last part of the international mobile subscriber identity (IMSI). The MIN is a number that uniquely identifies a mobile phone working under TIA standards for cellular and PCS technologies. It can also be called the MSID or IMSI_S.

GAIT is a wireless standard developed in 1999 that allows cross-operation of mobile telephone technologies. Phones compliant with the GAIT standard can operate on either contemporary GSM networks, or the legacy IS-136 TDMA and AMPS networks found extensively throughout North America.

The Reporting Body Identifier is the first two digits of a Global System for Mobile Communications (GSM) Type Allocation Code, and indicates the GSMA-approved organization that registered a given mobile device, and allocated the model a unique code.

International Forum on ANSI-41 Standards Technology (IFAST) is the coordinator for the allocation of System Identification Numbers (SID) for wireless communication outside Canada, the United States and territories, and on the assignment of International Roaming mobile identification numbers (MINs), or IRM, for use in cellular mobile devices.

A system identification number (SID) is broadcast by one or more base stations to identify a cellular network in a certain area. It is globally unique within AMPS, TDMA or CDMA networks. This number sometimes has conflicts.

Comparison of mobile phone standards Wikimedia list article

This is a comparison of standards of mobile phones. A new generation of cellular standards has appeared approximately every tenth year since 1G systems were introduced in 1979 and the early to mid-1980s.

A mobile equipment identifier (MEID) is a globally unique number identifying a physical piece of CDMA2000 mobile station equipment. The number format is defined by the 3GPP2 report S.R0048 but in practical terms, it can be seen as an IMEI but with hexadecimal digits.

Phone cloning is the copying of identity from one cellular device to another.

A Central Equipment Identity Register (CEIR) is a database of mobile equipment identifiers. Such an identifier is assigned to each SIM slot of the mobile device.

A UIMID is a 32-bit Electronic Serial Number (ESN) stored in a R-UIM or CSIM used for TDMA or CDMA2000 phones. It is given a different name to avoid confusion with the hardware ESN stored in the phone. In all known systems the UIMID displaces the ESN in signaling. Because the UIMID is allocated from the same numbering space as ESN its existence is transparent to the network. The reason the UIMID is transmitted instead of the ESN is because the card contains the MIN or IMSI and devices such as the HLR running the Asbi

EUIMID is a unique identifier for an R-UIM or CSIM card in CDMA2000 cellular systems that replaces the older UIMID identifier. There are two forms of EUIMID, known as Short Form (SF_EUIMID) and Long Form (LF_EUIMID). Both produce a 32-bit pseudo-UIMID (pUIMID) with 0x80 in the upper 8 bits and the least significant 24 bits of the SHA-1 hash of the entire SF_EUIMID or the entire ICCID EF in the lower 24 bits.

A CDMA subscriber identity module (CSIM) is an application to support CDMA2000 phones that runs on a UICC, with a file structure derived from the R-UIM card. By porting the application to the UICC, a card with CSIM, SIM, and USIM can operate with all major cellular technologies worldwide. The CSIM application allows users to change phones by simply removing the smart card from one mobile phone and inserting it into another mobile phone or broadband telephony device supporting the CDMA2000 radio interface.

Cellular frequencies are the sets of frequency ranges within the ultra high frequency band that have been assigned for cellular-compatible mobile devices, such as mobile phones, to connect to cellular networks. Most mobile networks worldwide use portions of the radio frequency spectrum, allocated to the mobile service, for the transmission and reception of their signals. The particular bands may also be shared with other radiocommunication services, e.g. broadcasting service, and fixed service operation.

References

  1. ↑ "Electronic serial numbers (ESNs)". Archived from the original on 2007-06-21. Retrieved 2007-12-29.
  2. ↑ 3GPP TS 23.003, V9.0.0, 2009–09
  3. ↑ https://www.tiaonline.org/standards_/resources/esn/documents/esn_meid_milestones_timeline.pdf Archived April 20, 2014, at the Wayback Machine
  4. ↑ "ESN Assignment Guidelines and Procedures, Version 1.9c. May 2007" (PDF). Archived from the original (PDF) on 2008-10-15. Retrieved 2008-07-01.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.