Energy rating label

Last updated

A typical energy rating label Energy rating label.gif
A typical energy rating label

In Australia and New Zealand, an energy rating label or energy rating is a label affixed to various appliances prior to retail sale, which allows consumers to compare the energy efficiency of product and allows consumers to know how much power a particular model will use to run. They allow consumers to compare the energy consumption of similar products, and factor lifetime running cost into their purchasing decision. [1] The energy rating label is a mandatory comparison label under Australian regulations for store sales but not for products sold online. [1] The label comprises an energy consumption figure for the appliance and a star rating. The energy consumption figure is an estimate of how much energy (in kilowatt-hours or kWh) the appliance will use over a year, based on assumptions about "average usage".

Contents

However, actual energy consumption will depend on how an appliance is used and how often it is used. Factors like climate can also influence energy consumption (and efficiency) for some appliances.

The energy rating label usually incorporates an energy star label, which is an endorsement label that is not regulated by the Australian Government. It is an international standard for energy efficient consumer products that originated in the United States. Appliances and equipment that qualify to carry the energy star mark are generally in the top 25% most energy efficient products. In Australia, the label is used for office equipment and home electronics. New Zealand uses the energy star label for a much wider range of products such as whitegoods, lighting, heating, water heating and windows. [1]

History

The label was introduced in 1986 in the Australian states of New South Wales and Victoria and later its use was extended to all states and territories. A mandatory, national labelling scheme was agreed to in 1992. Australia was the third country to establish such a system, after Canada and the United States. [2]

An International Energy Agency survey revealed that compliance by retailers showing the labels was raised from 94% in 2001 to 98% in 2009. [3]

See also

Related Research Articles

<span class="mw-page-title-main">Major appliance</span> Large machine which accomplishes routine housekeeping

A major appliance, also known as a large domestic appliance or large electric appliance or simply a large appliance, large domestic, or large electric, is a non-portable or semi-portable machine used for routine housekeeping tasks such as cooking, washing laundry, or food preservation. Such appliances are sometimes collectively known as white goods, as the products were traditionally white in colour, although a variety of colours are now available. An appliance is different from a plumbing fixture because it uses electricity or fuel.

<span class="mw-page-title-main">Energy Star</span> US energy efficiency program

Energy Star is a program run by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) that promotes energy efficiency. The program provides information on the energy consumption of products and devices using different standardized methods. The Energy Star label is found on more than 75 different certified product categories, homes, commercial buildings, and industrial plants. In the United States, the Energy Star label is also shown on the Energy Guide appliance label of qualifying products.

<span class="mw-page-title-main">Energy conservation</span> Reducing energy consumption

Energy conservation is the effort to reduce wasteful energy consumption by using fewer energy services. This can be done by using energy more effectively or changing one's behavior to use less service. Energy conservation can be achieved through efficient energy use, which has some advantages, including a reduction in greenhouse gas emissions and a smaller carbon footprint, as well as cost, water, and energy savings.

<span class="mw-page-title-main">European Union energy label</span> Energy consumption labelling scheme

EU Directive 92/75/EC (1992) established an energy consumption labelling scheme. The directive was implemented by several other directives thus most white goods, light bulb packaging and cars must have an EU Energy Label clearly displayed when offered for sale or rent. The energy efficiency of the appliance is rated in terms of a set of energy efficiency classes from A to G on the label, A being the most energy efficient, G the least efficient. The labels also give other useful information to the customer as they choose between various models. The information should also be given in catalogues and included by internet retailers on their websites.

<span class="mw-page-title-main">Ecolabel</span> Labeling systems for food and consumer products

Ecolabels and Green Stickers are labeling systems for food and consumer products. The use of ecolabels is voluntary, whereas green stickers are mandated by law; for example, in North America major appliances and automobiles use Energy Star. They are a form of sustainability measurement directed at consumers, intended to make it easy to take environmental concerns into account when shopping. Some labels quantify pollution or energy consumption by way of index scores or units of measurement, while others assert compliance with a set of practices or minimum requirements for sustainability or reduction of harm to the environment. Many ecolabels are focused on minimising the negative ecological impacts of primary production or resource extraction in a given sector or commodity through a set of good practices that are captured in a sustainability standard. Through a verification process, usually referred to as "certification", a farm, forest, fishery, or mine can show that it complies with a standard and earn the right to sell its products as certified through the supply chain, often resulting in a consumer-facing ecolabel.

<span class="mw-page-title-main">Low-energy house</span> House designed for reduced energy use

A low-energy house is characterized by an energy-efficient design and technical features which enable it to provide high living standards and comfort with low energy consumption and carbon emissions. Traditional heating and active cooling systems are absent, or their use is secondary. Low-energy buildings may be viewed as examples of sustainable architecture. Low-energy houses often have active and passive solar building design and components, which reduce the house's energy consumption and minimally impact the resident's lifestyle. Throughout the world, companies and non-profit organizations provide guidelines and issue certifications to guarantee the energy performance of buildings and their processes and materials. Certifications include passive house, BBC—Bâtiment Basse Consommation—Effinergie (France), zero-carbon house (UK), and Minergie (Switzerland).

In the United States, the efficiency of air conditioners is often rated by the seasonal energy efficiency ratio (SEER) which is defined by the Air Conditioning, Heating, and Refrigeration Institute, a trade association, in its 2008 standard AHRI 210/240, Performance Rating of Unitary Air-Conditioning and Air-Source Heat Pump Equipment. A similar standard is the European seasonal energy efficiency ratio (ESEER).

The Nationwide House Energy Rating Scheme (NatHERS) is an Australian scheme to measure the energy efficiency of a residential dwelling. An accredited software tool assesses the home based on a variety of criteria and produces an energy star rating.

<span class="mw-page-title-main">EnergyGuide</span> Label showing the energy cost of appliances

The EnergyGuide provides consumers in the United States information about the energy consumption, efficiency, and operating costs of appliances and consumer products.

<span class="mw-page-title-main">Energy performance certificate</span> Rating scheme to summarise the energy efficiency of buildings or devices

An energy performance certificate (EPC) is a rating scheme to summarise the energy efficiency of buildings or devices.

<span class="mw-page-title-main">Efficient energy use</span> Energy efficiency

Efficient energy use, sometimes simply called energy efficiency, is the process of reducing the amount of energy required to provide products and services. For example, insulating a building allows it to use less heating and cooling energy to achieve and maintain a thermal comfort. Installing light-emitting diode bulbs, fluorescent lighting, or natural skylight windows reduces the amount of energy required to attain the same level of illumination compared to using traditional incandescent light bulbs. Improvements in energy efficiency are generally achieved by adopting a more efficient technology or production process or by application of commonly accepted methods to reduce energy losses.

A minimum energy performance standard (MEPS) is a specification, containing a number of performance requirements for an energy-using device, that effectively limits the maximum amount of energy that may be consumed by a product in performing a specified task.

<span class="mw-page-title-main">Green building in Australia</span> Overview of green building in Australia

Green buildings in Australia are assessed and rated by a variety of government and independent ratings systems.

<span class="mw-page-title-main">Energy conservation in the United States</span> How power is used and saved by Americans

The United States is the second-largest single consumer of energy in the world. The U.S. Department of Energy categorizes national energy use in four broad sectors: transportation, residential, commercial, and industrial. Energy usage in transportation and residential sectors is largely controlled by individual domestic consumers. Commercial and industrial energy expenditures are determined by businesses entities and other facility managers. National energy policy has a significant effect on energy usage across all four sectors.

<span class="mw-page-title-main">Bureau of Energy Efficiency</span>

The Bureau of Energy Efficiency is an agency of the Government of India, under the Ministry of Power, created in March 2002 under the provisions of the nation's 2001 Energy Conservation Act. The agency's function is to encourage the efficient use of energy in India by developing programs to support it. For example, the government proposed to make it mandatory for certain appliances in India to have ratings by the BEE from January 2010 onwards. The mission of the Bureau of Energy Efficiency is to institutionalise energy efficiency services, enable delivery mechanisms in the country and provide leadership to energy efficiency in all sectors of the country. Its primary objective is to reduce energy intensity in the economy.

Energy rating may refer to:

Zero-carbon housing is a term used to describe a house that does not emit greenhouse gasses, specifically carbon dioxide (CO2), into the atmosphere. Homes release greenhouse gases through burning fossil fuels in order to provide heat, or even while cooking on a gas stove. A zero carbon house can be achieved by either building or renovating a home to be very energy efficient and for its energy consumption to be from non-emitting sources, for example electricity.

The Energy Conservation Program for Consumer Products Other Than Automobiles is a regulatory program that enforces minimum energy conservation standards for appliances and equipment in the United States. The program was established under Part B of Title III of the Energy Policy and Conservation Act of 1975 and gives the Department of Energy (DOE) the authority to develop and implement test procedures and minimum standards for more than 60 products covering residential, commercial and industrial, lighting, and plumbing applications. The Department of Energy is required to set standards that are "technologically feasible and economically justified."

The House Energy Rating (HER) or House Energy Rating Scheme (HERS) are worldwide standard measures of comparison by which one can evaluate the energy efficiency of a new or an existing building. The comparison is generally done for energy requirements for heating and cooling of indoor space. The energy is the main criterion considered by any international building energy rating scheme but there are some other important factors such as production of greenhouse gases emission, indoor environment quality, cost efficiency and thermal comfort, which are considered by some schemes. Basically, the energy rating of a residential building provides detailed information on the energy consumption and the relative energy efficiency of the building. Hence, HERs inform consumers about the relative energy efficiency of homes and encourage them to use this information in making their house purchase decision.

<span class="mw-page-title-main">China Energy Label</span> Energy consumption labelling scheme

The China Energy Label is an energy consumption label for products in China, similar to the European Union energy label. Manufacturers of specified electronic devices are obligated to attach a CEL label to their goods to inform China-based consumers of the product's energy efficiency. The label includes the product's energy efficiency class (1–5) as well as information regarding its energy consumption.

References

  1. 1 2 3 "Labelling". Energy Rating. Archived from the original on 9 January 2020. CC-BY icon.svg This article contains quotations from this source, which is available under a Creative Commons Attribution 3.0 Australia licence.
  2. "History of the labelling program in Australia". Commonwealth of Australia. 2 February 2009. Archived from the original on 1 June 2011. Retrieved 11 June 2011.
  3. "Energy rating labels success". Bigpond News. 13 October 2010. Retrieved 11 June 2011.[ dead link ]
  1. https://web.archive.org/web/20110601175054/http://www.energyrating.gov.au/history.html Commonwealth of Australia. 2 February 2009. Archived from the original on 1 June 2011. Retrieved 11 June 2011.