Ensoniq TS-10

Last updated

The Ensoniq TS-10 was a synthesizer and music workstation introduced by Ensoniq in 1993. It provided synthesis, user sample playback, sequencer, effect units and performance facilities in a 61-key package.

Contents

Another version, the TS-12, had the same features plus 76 weighted keys and channel aftertouch courtesy of a Fatar keybed, whereas the TS-10 had polyphonic aftertouch and 61 unweighted keys.

Main features

The TS series had 32-note polyphony, integrated 24-bit effects engine, (with 48 bit accumulation) a 30,000 note sequencer (expandable to over 100,000 via memory chips) which featured up to 24 tracks, full MIDI capabilities. The design was a direct evolution of Ensoniq's previous VFX and SD synthesizers. While the synthesis structure lacked a resonant filter, which limited the sample+synthesis possibilities, the TS could read ASR wavesamples directly. This feature allowed musicians to play sounds from a vast library of sample disks and CD-ROMs (via SCSI expansion option).

The front panel offered plenty of buttons for dedicated functions, and a large 40 x 92 vacuum fluorescent display, easier to read onstage than conventional LCD displays.

Synthesis structure

The TS offered up to 6 oscillators per patch or sound. Each oscillator was processed by its own pitch, filter and amplifier blocks, with dedicated LFOs and envelope generators for each block. The architecture allowed various modulation sources, such as keyboard velocity, modulation and pitch wheels, etc. to modify several instances of the sonic chain. Despite the well-specified architecture, the filter didn't feature any kind of resonance. This limited the possibilities of emulating analog and heavily-filtered sounds. However, this was a common omission from several manufacturers of the early 1990s. The total 32-note polyphony was reduced when using more than one waveform per patch. The user patches could be stored in one of 120 memories, or saved to floppy disk.

Hyperwave

It was an attempt to offer a kind of basic wavesequencing, it essentially was a series of user-defined waveforms, taken from the internal ROM or sample RAM area, and played in sequence with definable playback step times, pitch and other parameters. Clever use of this facility could produce complete rhythmic patterns. One big limitation was the wavesequencing timing, which was fixed at patch level and not tempo-dependent.

Effects

An integral component of Ensoniq synths, the TS' effects were first-class and well specified, at 24-bit and 32 kHz engine. The effects block was arranged in several fixed algorithms, which allowed up to three simultaneous effects at once, plus a dry signal path. The effects list was comprehensive, including reverbs, flangers, chorus, compressors, delays. While adequate at single patch level, the effects block had to be shared by all instruments when the sequencer was used, meaning that only selected sounds could ported their effects to the mix.

Sequencer

Ensoniq's approach for sequencing was somewhat different from other manufacturers. Instead of offering a linear set of tracks for recording, the TS required the user to record short sequences (12 tracks each) to use as a base for song structure, then chaining them and optionally layering another 12 linear tracks on top of the chained blocks. The sequencer editing options included quantization with audition, controller editing and scaling and MIDI functions per track, as well as copying whole or parts of tracks to anywhere else. The keyboard could store up to 30 songs with 100 sequences per song, memory-permitting, and everything was kept in memory when the synth was turned off. Modern synthesizers, with larger and better sequencers, demand the user to save their work before power down, since the sequencer memory is not backed up.

Sample playback

In addition to the machine's internal 6 MB ROM sampled waveforms, the user could install up to 8 MB (divided into two banks of 4 MB) sample RAM (volatile), via 30-pin SIMMs. The samples could be loaded from the floppy disk drive, or via a SCSI hard drive or CD-ROM attached to the machine, containing an ASR-format disk. The synth even remembered the mapping of samples and sounds used, and requested the appropriate disks for loading in power-up. The TS couldn't import WAV or AIFF format samples as the disk format used was Ensoniq's own, first developed for the EPS sampler, and it wasn't MS-DOS compatible, so the user was limited to loading samples available in the extensive EPS/ASR library.

Performance features

The TS offered the ubiquitous pair of modulation and pitch wheels, polyphonic aftertouch, and 'patch select' buttons for easily changing tonal variants of a patch. It was very easy to layer up to three single sounds, or split the keyboard in all zones for internal or MIDI playing control, without cumbersome menu editing. It was also possible to layer up to six single sounds by taking advantage of the live-auditioning feature of the sequencer (without actually recording or playing back anything), but this was less easy to manage in a performance environment.

In use

The TS suffered from limitations including the non-resonant digital filter, or the proprietary format used for floppies, which was incompatible with anything else. This prevented Standard MIDI Files to be read by the machine, and the strange track arrangement of the sequencer limited the MIDI multitimbral parts of the TS to 12 instead of the standard 16.

The vacuum fluorescent display, although unique and very easy to read, was prone to malfunction after much time of use and very hard to replace or repair. Even Ensoniq acknowledged this problem by creating a variant called the TS-10 Plus, which used a conventional LCD display instead of the vacuum one. This model also had the SCSI expansion installed and the full sample memory expansion also installed.

The TS series were well received by musicians and producers, mainly because of the rich, professional sound they offered, the enormous ASR sample library that it could load, and the live performance features that offered.

Related Research Articles

A music workstation is an electronic musical instrument providing the facilities of:

<span class="mw-page-title-main">Sampler (musical instrument)</span> Device that records and plays back samples

A sampler is an electronic musical instrument that records and plays back samples. Samples may comprise elements such as rhythm, melody, speech, sound effects or longer portions of music.

The Ensoniq Mirage is one of the earliest affordable sampler-synths, introduced in 1984 as Ensoniq's first product. Introduced at a list price of $1,695 with features previously only found on more expensive samplers like the Fairlight CMI, the Mirage sold nearly 8,000 units in its first year - more than the combined unit sales of all other samplers at that time. The Mirage sold over 30,000 units during its availability.

<span class="mw-page-title-main">Korg Triton</span> Workstation synthesizer

The Korg Triton is a music workstation synthesizer, featuring digital sampling and sequencing, released in 1999. It uses Korg's "HI Synthesis" system and was eventually available in several model variants with numerous upgrade options. The Triton became renowned as a benchmark of keyboard technology, and has been widely featured in music videos and live concerts. At the NAMM Show in 2007, Korg announced the Korg M3 as its successor.

<span class="mw-page-title-main">Ensoniq ESQ-1</span> Synthesizer

Ensoniq ESQ-1 is a 61-key, velocity sensitive, eight-note polyphonic and multitimbral synthesizer released by Ensoniq in 1985. It was marketed as a "digital wave synthesizer" but was an early Music Workstation. Although its voice generation is typically subtractive in much the same fashion as most analog synthesizers that preceded it, its oscillators are neither voltage nor "digitally controlled", but true digital oscillators, provided by a custom Ensoniq wavetable chip. The signal path includes analog resonant low-pass filters and an analog amplifier.

<span class="mw-page-title-main">Kurzweil Music Systems</span> American electronic musical instrument manufacturer

Kurzweil Music Systems is an American company that produces electronic musical instruments. It was founded in 1982 by Stevie Wonder (musician), Ray Kurzweil (innovator) and Bruce Cichowlas.

<span class="mw-page-title-main">Ensoniq MR61</span>

The Ensoniq MR61 is a 61-key music workstation synthesizer that Ensoniq released in 1996. It features a 16-track sequencer, digital effects, and several hundred onboard sounds or patches.

<span class="mw-page-title-main">Ensoniq EPS</span> Digital musical instrument

The Ensoniq Performance Sampler (EPS) was one of the first few affordable samplers on the market. It was manufactured from 1988 to 1991 by Ensoniq in Malvern, Pennsylvania, US. The EPS is a 13-bit sampler and replaced the Mirage - widely regarded as the first truly affordable sampling keyboard.

<span class="mw-page-title-main">Korg DW-8000</span> Hybrid digital-analog synthesizer

The Korg DW-8000 is a polyphonic hybrid digital-analog synthesizer released in 1985. It blends digital waveforms with an analog filter and amplifier, followed by a digital delay for adding echo effects. It boasts eight-note polyphony and its keyboard is equipped with velocity sensitivity and aftertouch.

<span class="mw-page-title-main">Korg Wavestation</span> Synthesizer

The Korg Wavestation is a vector synthesis synthesizer first produced in the early 1990s and later re-released as a software synthesizer in 2004. Its primary innovation was Wave Sequencing, a method of multi-timbral sound generation in which different PCM waveform data are played successively, resulting in continuously evolving sounds. The Wavestation's "Advanced Vector Synthesis" sound architecture resembled early vector synths such as the Sequential Circuits Prophet VS.

The Yamaha SY85 is a digital music workstation introduced in 1992. Unlike other Yamaha synthesizers of the time the SY85 does not use FM synthesis. Instead, its sounds are based on samples, which can be layered and modified to create new sounds.

<span class="mw-page-title-main">Ensoniq VFX</span> Synthesizer

The Ensoniq VFX Synth was initially released as a performance type synthesizer in 1989. It was soon followed by the release of the VFX-SD, which included some updated waveforms, a 24-track sequencer and a floppy drive. Both models were equipped with the Ensoniq Signal Processing (ESP) chip for 24-bit effects. The VFX-SD also included two AUX outs, which allowed for a total of 4 outputs from the synth for more routing flexibility. The initial models were 21-voice polyphony, and in latter models of the VFX-SD (I/II) and the SD-1, the polyphony was 32.


The Yamaha V50 is a hybrid music workstation introduced in 1989. It combines a sequencer, rhythm machine, an FM synthesis-based sound module and a MIDI keyboard.

<span class="mw-page-title-main">Roland XP-50</span> Music workstation

The Roland XP-50 is a music workstation that combines the synthesizer engine of Roland's JV-1080 sound module with the sequencing capabilities of their MRC-Pro sequencer and a 61-note keyboard. First released in 1995, the XP-50 and the Roland XP-10 were the first two Roland XP-series products, later joined by the XP-80 and XP-30.

<span class="mw-page-title-main">Korg DSS-1</span> Polyphonic synthesizer

The Korg DSS-1 is a polyphonic sampling synthesizer released by Korg in 1986. As Korg's initial entry into the sampling market, the DSS-1 combines sampling, additive synthesis, and waveform drawing with an analog signal path. The DSS-1 was released a time when major synthesizer manufacturers like Yamaha and Casio were beginning to explore sampling, an area of sound design dominated by companies like Fairlight, E-mu, and Ensoniq. Korg did not stay long in the sampling arena; the DSS-1 was the company's only sampler until 1998 when Korg introduced sampling options on their Triton and Trinity series of workstations.

<span class="mw-page-title-main">Yamaha SY77</span>

Yamaha SY77 is a 16 voice multitimbral music workstation first produced by Yamaha Corporation in 1989. The SY77 is a synthesizer whose architecture combines AFM synthesis, AWM2 for ROM-borne sample-based synthesis, and the combination of these two methods christened Realtime Convolution and Modulation Synthesis (RCM). The same technology was also packaged in a rack-mounted module released simultaneously, the TG77.

The Yamaha SY99 is a synthesiser combining frequency modulation synthesis and sample-based synthesis and the direct successor to Yamaha's SY77/TG77. Compared to the SY77, it has a larger keyboard at 76 keys instead of 61, a larger ROM with more in-built AWM samples, the ability to load user-specified AWM samples into on-board RAM, an upgraded effects processor, and several other enhanced features.

The Alesis Quadrasynth is a 76-key, 64-note polyphonic PCM sample-based digital subtractive synthesizer first introduced in 1993. It was Alesis's first major foray into synthesizer production.

<span class="mw-page-title-main">Ensoniq SQ-80</span>

The Ensoniq SQ-80 is a digital/analog synthesizer manufactured from 1987 to 1989. It was Ensoniq's update to its first synth, the Ensoniq ESQ-1.

<span class="mw-page-title-main">Ensoniq ASR-10</span> Digital musical instrument

The Ensoniq ASR-10 is a sampling keyboard produced by Ensoniq between 1992 and 1998. The ASR-10 was a follow-up product to the very popular Ensoniq EPS and EPS-16 Plus performance samplers, and was also available with a piano style weighted keyboard (ASR-88) and a rackmount version (ASR-10R). At the time, the machine was one of the most powerful samplers available.

References