Erbium-doped waveguide amplifier

Last updated

An erbium-doped waveguide amplifier (or EDWA) is a type of an optical amplifier enhanced with erbium. It is a close relative of an EDFA, erbium-doped fiber amplifier, and in fact EDWA's basic operating principles are identical to those of the EDFA. Both of them can be used to amplify infrared light at wavelengths in optical communication bands between 1500 and 1600 nm. However, whereas an EDFA is made using a free-standing fiber, an EDWA is typically produced on a planar substrate, sometimes in ways that are very similar to the methods used in electronic integrated circuit manufacturing. Therefore, the main advantage of EDWAs over EDFAs lies in their potential to be intimately integrated with other optical components on the same planar substrate and thus making EDFAs unnecessary.

Contents

Early development

The early EDWA development was motivated by a promise (or a hope) that it can deliver smaller and cheaper components than those achievable with EDFAs. The development of waveguide amplifiers, along with other types of optical amplifiers, experienced a very rapid growth throughout 1990's. Several research labs, private companies and universities took part in this work by focusing on working out the basic material science necessary for their manufacturing. They included Bell Laboratories (Lucent Technologies, US), Teem Photonics (Meylan, France), Molecular OptoElectronics Corp. (New York, US) and a few others. [1] Each of them took a unique path in their research and experimented with different approaches. However, most of these efforts since then have been discontinued.

MOEC developed a unique micro-mechanical approach to producing channel waveguides that can be doped with rare-earth elements at high concentrations. [2] They were able to cut, polish and glue together straight sections of channel waveguides of varying lengths (typically few centimeters) and cross-sections (typically few tens of microns). These waveguides were usually characterized by relatively large cross-section areas and high index contrast. As a result, unlike single mode fibers, they were multi-mode and able to maintain multiple optical modes at the same wavelength and polarization. The primary way to couple light in and out of such a waveguide was by using bulk optical components, such as prisms, mirrors and lenses, which further complicated their use in fiber-optic systems.

Teem Photonics used an ion-exchange process to produce a channel waveguide in a rare-earth doped phosphate glass. [3] Resulting waveguides were typically single-mode waveguides, which could be easily integrated with other fiber-optic components. In addition, several different elements could be integrated in one circuit, including gain blocks, couplers, splitters and others. [4] However, due to a relatively low refractive index contrast between the core and the cladding in these waveguides, the selection of optical elements that can be produced on such a platform was rather limited and the resulting circuit size tended to be large, i.e. comparable to then available fiber-optic counterparts.

Bell Labs took yet another approach to making EDWAs by using a so-called "silicon optical bench" technology. [5] They experimented with different glass compositions, including aluminosilicate, phosphate, soda-lime and others, which could be deposited as thin layers on top of silicon substrates. [6] Different waveguides and waveguide circuits could be subsequently formed using photolithography and different etching techniques. Bells Labs successfully showed not only high gain amplification, but also the capabilities to integrate active and passive planar waveguide elements, e.g. a gain block and a pump coupler, in the same circuit. [7]

Later years

Commercial EDWA development efforts intensified in 2000's when Inplane Photonics joined the race. [8] In general, their approach was similar to that of Bell Labs, i.e. the silica-on-silicon technology. Inplane Photonics, however, was able to further improve and expand capabilities of this technology by integrating two to three different waveguide types on the same chip. [9] This feature allowed them to monolithically integrate gain blocks (active waveguides providing amplification) with different passive elements, such as couplers, arrayed waveguide gratings (AWG), optical taps, turning mirrors and so on. Some of advanced Inplane Photonics' photonic circuits containing EDWAs were used by Lockheed Martin in their development of new high-speed on-board communication systems for the US Air Force. [10] Inplane Photonics and its technology was later acquired by CyOptics. [11]

Comparison between EDWA and EDFA

EDWA and EDFA are difficult to compare without a proper context. At least three different scenarios or use cases can be analyzed: (1) stand-alone amplifiers, (2) stand-alone lasers and (3) integrated components.

Stand-alone amplifiers

EDWAs are typically characterized by higher erbium concentrations and background losses than those in regular EDFAs. Those lead to relatively higher noise figures and lower saturation powers, although the differences can be very small, sometimes amounting a fraction of dB (decibel). [12] Thus for demanding applications, where it is important to minimize noise and maximize output power, an EDFA may be preferred over an EDWA. However, if the physical size of a device is a constraint, than an EDWA or an EDWA array may be a better choice.

Stand-alone lasers

An optical amplifier may be used as a part of a laser, e.g. a fiber laser. Some parameters, such as the noise figure, are less relevant for this application and therefore using an EDWA instead of an EDFA may be advantageous. EDWA-based lasers can be more compact and more tightly integrated with other laser components and elements. This feature allows one to create very unusual lasers that are difficult to implement by other means, as demonstrated by an MIT research group, which produced a very compact femtosecond laser with a very fast repetition rate. [13]

Integrated components

An optical amplifier may be also used as a component in a larger system for compensating optical losses from other components in that system. The EDWA technology allows one to potentially produce a whole system using a single integrated optical circuit, as in a system-on-a-chip, [14] rather than an assembly of individual fiber-optic components. In such systems, EDWA may then hold an advantage over EDFA-based solutions, due to the smaller size and potentially lower cost.

Related Research Articles

<span class="mw-page-title-main">Optical amplifier</span> Device that amplifies an optical signal

An optical amplifier is a device that amplifies an optical signal directly, without the need to first convert it to an electrical signal. An optical amplifier may be thought of as a laser without an optical cavity, or one in which feedback from the cavity is suppressed. Optical amplifiers are important in optical communication and laser physics. They are used as optical repeaters in the long distance fiberoptic cables which carry much of the world's telecommunication links.

<span class="mw-page-title-main">Wavelength-division multiplexing</span> Fiber-optic communications technology

In fiber-optic communications, wavelength-division multiplexing (WDM) is a technology which multiplexes a number of optical carrier signals onto a single optical fiber by using different wavelengths of laser light. This technique enables bidirectional communications over a single strand of fiber, also called wavelength-division duplexing, as well as multiplication of capacity.

<span class="mw-page-title-main">Photonics</span> Technical applications of optics

Photonics is a branch of optics that involves the application of generation, detection, and manipulation of light in form of photons through emission, transmission, modulation, signal processing, switching, amplification, and sensing. Photonics is closely related to quantum electronics, where quantum electronics deals with the theoretical part of it while photonics deal with its engineering applications. Though covering all light's technical applications over the whole spectrum, most photonic applications are in the range of visible and near-infrared light. The term photonics developed as an outgrowth of the first practical semiconductor light emitters invented in the early 1960s and optical fibers developed in the 1970s.

All-silica fiber, or silica-silica fiber, is an optical fiber whose core and cladding are made of silica glass. The refractive index of the core glass is higher than that of the cladding. These fibers are typically step-index fibers. The cladding of an all-silica fiber should not be confused with the polymer overcoat of the fiber.

Optics is the branch of physics which involves the behavior and properties of light, including its interactions with matter and the construction of instruments that use or detect it. Optics usually describes the behavior of visible, ultraviolet, and infrared light. Because light is an electromagnetic wave, other forms of electromagnetic radiation such as X-rays, microwaves, and radio waves exhibit similar properties.

<span class="mw-page-title-main">Optical ring resonators</span>

An optical ring resonator is a set of waveguides in which at least one is a closed loop coupled to some sort of light input and output. The concepts behind optical ring resonators are the same as those behind whispering galleries except that they use light and obey the properties behind constructive interference and total internal reflection. When light of the resonant wavelength is passed through the loop from the input waveguide, the light builds up in intensity over multiple round-trips owing to constructive interference and is output to the output bus waveguide which serves as a detector waveguide. Because only a select few wavelengths will be at resonance within the loop, the optical ring resonator functions as a filter. Additionally, as implied earlier, two or more ring waveguides can be coupled to each other to form an add/drop optical filter.

Sir David Neil Payne CBE FRS FREng is a British professor of photonics who is director of the Optoelectronics Research Centre at the University of Southampton. He has made several contributions in areas of optical fibre communications over the last fifty years and his work has affected telecommunications and laser technology. Payne’s work spans diverse areas of photonics, from telecommunications and optical sensors to nanophotonics and optical materials, including the introduction of the first optical fibre drawing tower in a university.

This is a list of acronyms and other initialisms used in laser physics and laser applications.

<span class="mw-page-title-main">Optical fiber</span> Light-conducting fiber

An optical fiber, or optical fibre in Commonwealth English, is a flexible glass or plastic fiber that can transmit light from one end to the other. Such fibers find wide usage in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths than electrical cables. Fibers are used instead of metal wires because signals travel along them with less loss; in addition, fibers are immune to electromagnetic interference, a problem from which metal wires suffer. Fibers are also used for illumination and imaging, and are often wrapped in bundles so they may be used to carry light into, or images out of confined spaces, as in the case of a fiberscope. Specially designed fibers are also used for a variety of other applications, such as fiber optic sensors and fiber lasers.

Optical networking is a means of communication that uses signals encoded in light to transmit information in various types of telecommunications networks. These include limited range local-area networks (LAN) or wide area networks (WANs), which cross metropolitan and regional areas as well as long-distance national, international and transoceanic networks. It is a form of optical communication that relies on optical amplifiers, lasers or LEDs and wavelength-division multiplexing (WDM) to transmit large quantities of data, generally across fiber-optic cables. Because it is capable of achieving extremely high bandwidth, it is an enabling technology for the Internet and telecommunication networks that transmit the vast majority of all human and machine-to-machine information.

An optical waveguide is a physical structure that guides electromagnetic waves in the optical spectrum. Common types of optical waveguides include optical fiber waveguides, transparent dielectric waveguides made of plastic and glass, liquid light guides, and liquid waveguides.

A fiber laser is a laser in which the active gain medium is an optical fiber doped with rare-earth elements such as erbium, ytterbium, neodymium, dysprosium, praseodymium, thulium and holmium. They are related to doped fiber amplifiers, which provide light amplification without lasing.

A photonic integrated circuit (PIC) or integrated optical circuit is a microchip containing two or more photonic components which form a functioning circuit. This technology detects, generates, transports, and processes light. Photonic integrated circuits utilize photons as opposed to electrons that are utilized by electronic integrated circuits. The major difference between the two is that a photonic integrated circuit provides functions for information signals imposed on optical wavelengths typically in the visible spectrum or near infrared (850–1650 nm).

<span class="mw-page-title-main">Silicon photonics</span> Photonic systems which use silicon as an optical medium

Silicon photonics is the study and application of photonic systems which use silicon as an optical medium. The silicon is usually patterned with sub-micrometre precision, into microphotonic components. These operate in the infrared, most commonly at the 1.55 micrometre wavelength used by most fiber optic telecommunication systems. The silicon typically lies on top of a layer of silica in what is known as silicon on insulator (SOI).

<span class="mw-page-title-main">Fiber-optic communication</span> Method of transmitting information

Fiber-optic communication is a method of transmitting information from one place to another by sending pulses of infrared or visible light through an optical fiber. The light is a form of carrier wave that is modulated to carry information. Fiber is preferred over electrical cabling when high bandwidth, long distance, or immunity to electromagnetic interference is required. This type of communication can transmit voice, video, and telemetry through local area networks or across long distances.

<span class="mw-page-title-main">Digital planar holography</span>

Digital planar holography (DPH) is a method for designing and fabricating miniature components for integrated optics. It was invented by Vladimir Yankov and first published in 2003. The essence of the DPH technology is embedding computer designed digital holograms inside a planar waveguide. Light propagates through the plane of the hologram instead of perpendicularly, allowing for a long interaction path. Benefits of a long interaction path have long been used by volume or thick holograms. Planar configuration of the hologram provider for easier access to the embedded diagram aiding in its manufacture.

Integrated quantum photonics, uses photonic integrated circuits to control photonic quantum states for applications in quantum technologies. As such, integrated quantum photonics provides a promising approach to the miniaturisation and scaling up of optical quantum circuits. The major application of integrated quantum photonics is Quantum technology:, for example quantum computing, quantum communication, quantum simulation, quantum walks and quantum metrology.

Robert J. Mears is an English physicist and engineer. In the 1980s, Dr. Mears invented and demonstrated the Erbium Doped Fiber Amplifier (EDFA) with the help of members of the Optoelectronics Research Group led by Alec Gambling and David Payne. In 2001 he founded Atomera, and as CTO led the invention and development of Mears Silicon Technology (MST), a method for improving the mobility and other characteristics of semiconductor devices. Mears has authored and co-authored more than 250 publications and patents, and is co-inventor of 46 granted US patents. He is an Emeritus Fellow of Pembroke College, Cambridge.

<span class="mw-page-title-main">John E. Bowers</span>

John E. Bowers is an American physicist, engineer, researcher and educator. He is the Fred Kavli Chair in Nanotechnology, the director of the Institute for Energy Efficiency and a distinguished professor in the Departments of Electrical and Computer Engineering and Materials at University of California, Santa Barbara. He was the deputy director of American Institute of Manufacturing of Integrated Photonics from 2015 to 2022.

Masataka Nakazawa is a Japanese researcher in optical communication engineering. He is a distinguished professor at Tohoku University in Japan. His pioneering work on erbium-doped fiber amplifier (EDFA) has made a significant contribution to the development of global long-distance, high-capacity optical fiber network.

References

  1. ↑ "EDWA: the new contender for optical amplification". www.fiberopticsonline.com. Retrieved 2017-04-10.
  2. ↑ "Optical channel waveguide amplifier". 1998-09-23.{{cite journal}}: Cite journal requires |journal= (help)
  3. ↑ "TEEM PHOTONICS | Home". www.teemphotonics.com. Retrieved 2017-04-11.
  4. ↑ "Apparatus and method for integrated photonic devices having gain and wavelength-selectivity". 2001-11-27.{{cite journal}}: Cite journal requires |journal= (help)
  5. ↑ Blonder, G. E. (1990-11-01). "Silicon Optical Bench Research at AT&T Bell Laboratories". LEOS '90. Conference Proceedings IEEE Lasers and Electro-Optics Society 1990 Annual Meeting. pp. 350–353. doi:10.1109/LEOS.1990.690603. ISBN   978-0-87942-550-0. S2CID   118002008.
  6. ↑ Hehlen, Markus P.; Cockroft, Nigel J.; Gosnell, T. R.; Bruce, Allan J. (1997). "Spectroscopic properties of Er3+- and Yb3+-doped soda-lime silicate and aluminosilicate glasses". Physical Review B. 56 (15): 9302–9318. Bibcode:1997PhRvB..56.9302H. doi:10.1103/physrevb.56.9302.
  7. ↑ Shmulovich, J.; Bruce, A. J.; Lenz, G.; Hansen, P. B.; Nielsen, T. N.; Muehlner, D. J.; Bogert, G. A.; Brener, I.; Laskowski, E. J. (1999-02-01). "Integrated planar waveguide amplifier with 15 dB net gain at 1550 nm". OFC/IOOC . Technical Digest. Optical Fiber Communication Conference, 1999, and the International Conference on Integrated Optics and Optical Fiber Communication. pp. PD42/1–PD42/3 Suppl. Bibcode:1999OptPN..10Q..50S. doi:10.1109/OFC.1999.766203. S2CID   15101065.{{cite book}}: |journal= ignored (help)
  8. ↑ Inc., Inplane Photonics. "Inplane Photonics Introduces the Industry's First Amplified Tunable Dispersion Compensator". www.prnewswire.com. Retrieved 2017-04-11.{{cite web}}: |last= has generic name (help)
  9. ↑ Frolov, S. V. (2006-03-01). "Waveguide amplifier design and integration". 2006 Optical Fiber Communication Conference and the National Fiber Optic Engineers Conference. pp. 3 pp.–. doi:10.1109/OFC.2006.215353. ISBN   978-1-55752-803-2. S2CID   44189860.
  10. ↑ "Inplane Photonics is Awarded Lockheed Martin Contract for Advanced Optical". www.businesswire.com (Press release). Retrieved 2017-04-11.
  11. ↑ "CyOptics acquires Inplane Photonics; expands photonic integrated circuits". www.militaryaerospace.com. January 2008. Retrieved 2017-04-11.
  12. ↑ Shmulovich, Joseph; Muehlner, D. J.; Bruce, A. J.; Delavaux, J.-M.; Lenz, G.; Gomez, L. T.; Laskowski, E. J.; Paunescu, A.; Pafchek, R. (2000-07-12). "Recent progress in Erbium-doped waveguide amplifiers". Integrated Photonics Research (2000), Paper IWC4. Optical Society of America: IWC4. doi:10.1364/IPR.2000.IWC4. ISBN   978-1-55752-643-4.
  13. ↑ Byun, H.; Pudo, D.; Frolov, S.; Hanjani, A.; Shmulovich, J.; Ippen, E. P.; Kartner, F. X. (2009-06-01). "Integrated Low-Jitter 400-MHz Femtosecond Waveguide Laser". IEEE Photonics Technology Letters. 21 (12): 763–765. Bibcode:2009IPTL...21..763B. doi:10.1109/LPT.2009.2017505. hdl: 1721.1/52360 . ISSN   1041-1135. S2CID   2746357.
  14. ↑ "Acquisition of "Silica-on-Silicon" PLC Technology Expands CyOptics' Toolbox for Photonic Integrated Circuits".
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.