Company type | GmbH |
---|---|
Industry | Automotive |
Founded | 1943 |
Headquarters | |
Key people | CEO: Andreas Thumm [1] |
Revenue | 430 Mio. EUR (2014) |
Number of employees | 3,800 (worldwide) |
Website | www.fte-automotive.com |
The FTE automotive Group is a German automotive manufacturing company specialized in the sector of drive train and brake system applications for the automotive industry. The company supplies all notable automobile manufacturers and employs over 3800 employees at 11 production sites around the world. [2] FTE automotive is based in Ebern, Bavaria, Germany. On June 2, 2016, Bain Capital sold FTE Automotive, which it had acquired in May 2013, [3] to the French automotive supplier Valeo for 819.3 million euros. [4]
The company produces a multitude of hydraulic brake and clutch components:
The product portfolio included electrical sensors [5] and accessories.
A clutch is a mechanical device that allows an output shaft to be disconnected from a rotating input shaft. The clutch's input shaft is typically attached to a motor, while the clutch's output shaft is connected to the mechanism that does the work.
An automatic transmission is a multi-speed transmission used in motor vehicles that does not require any input from the driver to change forward gears under normal driving conditions. Vehicles with internal combustion engines, unlike electric vehicles, require the engine to operate in a narrow range of rates of rotation, requiring a gearbox, operated manually or automatically, to drive the wheels over a wide range of speeds.
Hydropneumatic suspension is a type of motor vehicle suspension system, designed by Paul Magès, invented by Citroën, and fitted to Citroën cars, as well as being used under licence by other car manufacturers. Similar systems are also widely used on modern tanks and other large military vehicles. The suspension was referred to as Suspension oléopneumatique in early literature, pointing to oil and air as its main components.
The Aktiengesellschaft für Automobilbau was a German producer of cars in the 1920s in the German capital of Berlin (Prussia).
A semi-automatic transmission is a multiple-speed transmission where part of its operation is automated, but the driver's input is still required to launch the vehicle from a standstill and to manually change gears. Semi-automatic transmissions were almost exclusively used in motorcycles and are based on conventional manual transmissions or sequential manual transmissions, but use an automatic clutch system. But some semi-automatic transmissions have also been based on standard hydraulic automatic transmissions with torque converters and planetary gearsets.
ZF Sachs AG, also known as Fichtel & Sachs, was founded in Schweinfurt in 1895 and was a well-known German family business. At its last point as an independent company, the company name was Fichtel & Sachs AG.
Drive by wire or DbW technology in the automotive industry is the use of electronic or electro-mechanical systems in place of mechanical linkages that control driving functions. The concept is similar to fly-by-wire in the aviation industry. Drive-by-wire may refer to just the propulsion of the vehicle through electronic throttle control, or it may refer to electronic control over propulsion as well as steering and braking, which separately are known as steer by wire and brake by wire, along with electronic control over other vehicle driving functions.
A preselector gearbox is a type of manual transmission mostly used on passenger cars and racing cars in the 1930s, in buses from 1940–1960 and in armoured vehicles from the 1930s to the 1970s. The defining characteristic of a preselector gearbox is that the gear shift lever allowed the driver to "pre-select" the next gear, usually with the transmission remaining in the current gear until the driver pressed the "gear change pedal" at the desired time.
A hydraulic brake is an arrangement of braking mechanism which uses brake fluid, typically containing glycol ethers or diethylene glycol, to transfer pressure from the controlling mechanism to the braking mechanism.
Apollo Automobil is a German sports car manufacturer headquartered in Denkendorf. Roland Gumpert, who founded Gumpert Sportwagenmanufaktur in 2004, once held the position of director of Audi Sport. Under his management, Audi won a total of 25 World Rally Championship rallies and four World Rally Championship titles.
The Killinger and Freund Motorcycle was an attempt in 1935 by a group of five German engineers from Munich to design a more streamlined and modified version of the German Megola front-wheel drive motorcycle. The work took three years to complete but the result was impressive. The engine displacement stayed the same as the Megola at 600 cc but was much lighter and more simplified than a standard 100 cc motorcycle of the time.
In road vehicles, the parking brake, also known as a handbrake or emergency brake (e-brake), is a mechanism used to keep the vehicle securely motionless when parked. Parking brakes often consist of a pulling mechanism attached to a cable which is connected to two wheel brakes. In most vehicles, the parking brake operates only on the rear wheels, which have reduced traction while braking. The mechanism may be a hand-operated lever, a straight pull handle located near the steering column, or a foot-operated pedal located with the other pedals.
Büssing AG was a German bus and truck manufacturer, established in 1903 by Heinrich Büssing (1843–1929) in Braunschweig. It quickly evolved to one of the largest European producers, whose utility vehicles with the Brunswick Lion emblem were widely distributed, especially from the 1930s onwards. The company was taken over by MAN AG in 1971.
Witte Automotive is an automotive supplier of mechatronic locking systems for car doors, tailgates, interiors, and seats.
Deutsche Pentosin-Werke GmbH, commonly known as Pentosin, is a global independent manufacturer of lubricants and related speciality products. The company was founded in 1927 at Hamburg, Germany. The current Pentosin headquarters are at Wedel in Schleswig-Holstein, not far from where the company had been founded.
The Dräxlmaier Group is a globally operating automotive supplier with its headquarters in the Lower Bavarian city of Vilsbiburg, Germany. Founded in 1958, the family-owned company specializes in the production of wiring harness systems, central electrical and electronic components, interiors, and low- and high-voltage battery systems for electric mobility for premium vehicles.
Ulrich W. Schiefer Ulrich W. Schiefer is a graduated engineer and Master of Business Administration. He is managing director of the AtTrack GmbH – Gesellschaft für Mobilität. He is an expert in setting up and managing companies, technology, innovation, product management, complete vehicle integration, composites, aerodynamics and engine development.
The Audi R8 LMS Cup was a one-make sports car racing series by Audi based in Asia. Audi R8 LMS Cup cars were based on the Audi R8 LMS (GT3).
ZT 300 is a series of 20 kN agricultural tractors, produced from 1 September 1967 to 1984 by the VEB Traktorenwerk Schönebeck. It succeeded the RS14 Famulus series, and unlike the Famulus, the ZT 300 series was sold under the brand name Fortschritt ("Progress"). ZT 300 refers both to the initial ZT 300 model, and the ZT 300 series. In total, 72,382 units of the ZT 300 series were made. The model with the highest production figure was the ZT 303, which was introduced in 1972. It features an automatic all-wheel-drive system; in the early 1980s, it cost 81,000 Mark. Starting in 1983, the ZT 300 series was succeeded by the ZT 320.
The Unimog 405 is a vehicle of the Unimog-series by Mercedes-Benz, made by Daimler Truck Holding AG. Developed in the 1990s, the Unimog 405 has been in production since 2000. Originally, DaimlerChrysler produced the Unimog at Gaggenau; in 2002, production was moved to Wörth am Rhein. The Unimog 405 is the implement carrier version of the Unimog and the successor to most previous Unimogs. Although retaining many characteristics typical of the Unimog, the 405's axle and chassis design concept with control arms instead of torque tubes marks a "paradigmatic change" in Unimog design.