Facemask (orthodontics)

Last updated
Teenage patient been fitted with her orthopedic / orthodontic facemask - required wear-time 16 hours daily. ORTHODONTIC FACE MASK REVERSE-PULL HEADGEAR TUBINGER MODEL.jpg
Teenage patient been fitted with her orthopedic / orthodontic facemask - required wear-time 16 hours daily.

A facemask (also referred to as a protraction facemask, orthopedic facemask, or reverse-pull headgear) is a type of an orthodontic headgear used to treat underbite and other malocclusions where the upper jaw is too far backwards. [1] A metal bar sits in front of the patients face with support from the forehead and chin. Elastics are connected to the metal bar and the teeth - directly through the lips / mouth of the patient. The elastics apply forward and downward pressure on the upper jaw. Thus the force direction is the opposite from a standard headgear which is why this appliance is also known as a reverse-pull-headgear. [1]

This facemask appliance needs to worn by the patient for between 14 and 16 hours daily. [2]

Additional images

Example of a protraction facemask being test fitted - an orthopedic / orthodontic facemask. Delaire protraction facemask.jpg
Example of a protraction facemask being test fitted - an orthopedic / orthodontic facemask.
Facemask headgear held onto the patient's face using the direct force of the connecting elastic bands into the patients mouth, typically worn 14 to 16 hours a day depending on treatment plan. Orthodontic face-mask or reverse pull headgear.jpg
Facemask headgear held onto the patient’s face using the direct force of the connecting elastic bands into the patients mouth, typically worn 14 to 16 hours a day depending on treatment plan.
The reverse side of the facemask headgear showing the face frame, pads for forehead and chin with moleskin padding for the patients comfort. Reverse side of an orthodontic Delaire type face-mask.jpg
The reverse side of the facemask headgear showing the face frame, pads for forehead and chin with moleskin padding for the patients comfort.

Related Research Articles

<span class="mw-page-title-main">Orthodontics</span> Correctional branch of dentistry

Orthodontics is a dentistry specialty that addresses the diagnosis, prevention, management, and correction of mal-positioned teeth and jaws, as well as misaligned bite patterns. It may also address the modification of facial growth, known as dentofacial orthopedics.

<span class="mw-page-title-main">Dental braces</span> Form of orthodontics

Dental braces are devices used in orthodontics that align and straighten teeth and help position them with regard to a person's bite, while also aiming to improve dental health. They are often used to correct underbites, as well as malocclusions, overbites, open bites, gaps, deep bites, cross bites, crooked teeth, and various other flaws of the teeth and jaw. Braces can be either cosmetic or structural. Dental braces are often used in conjunction with other orthodontic appliances to help widen the palate or jaws and to otherwise assist in shaping the teeth and jaws.

<span class="mw-page-title-main">Orthodontic headgear</span> Orthodontic device used to correct bite

Orthodontic headgear is a type of orthodontic appliance typically attached to the patient's head with a strap or number of straps around the patient's head or neck. From this, a force is transferred to the mouth/jaw(s) of the subject.

<span class="mw-page-title-main">Prognathism</span> Protrusion of the upper or lower human jaw

Prognathism is a positional relationship of the mandible or maxilla to the skeletal base where either of the jaws protrudes beyond a predetermined imaginary line in the coronal plane of the skull.

<span class="mw-page-title-main">Malocclusion</span> Medical condition

In orthodontics, a malocclusion is a misalignment or incorrect relation between the teeth of the upper and lower dental arches when they approach each other as the jaws close. The English-language term dates from 1864; Edward Angle (1855–1930), the "father of modern orthodontics", popularised it. The word "malocclusion" derives from occlusion, and refers to the manner in which opposing teeth meet.

<span class="mw-page-title-main">Palatal expansion</span> Orthodontics device to widen the upper jaw

A palatal expander is a device in the field of orthodontics which is used to widen the upper jaw (maxilla) so that the bottom and upper teeth will fit together better. This is a common orthodontic procedure. The use of an expander is most common in children and adolescents 8–18 years of age. It can also be used in adults, although expansion is more uncomfortable and takes longer in adults. A patient who would rather not wait several months for the end result achieved by a palatal expander may be able to opt for a surgical separation of the maxilla. Use of a palatal expander is most often followed by braces to then straighten the teeth.

Orthodontic technology is a specialty of dental technology that is concerned with the design and fabrication of dental appliances for the treatment of malocclusions, which may be a result of tooth irregularity, disproportionate jaw relationships, or both.

Jaw wiring is a medical procedure to keep the jaw closed for a period of time. Originally, it was used as the mandibular equivalent of a cast, to fix the jaw in place while a fracture healed. Jaw wiring is also used for weight-loss purposes, to prevent the ingestion of solid food.

<span class="mw-page-title-main">Overjet</span> Medical condition

Overjet is the extent of horizontal (anterior-posterior) overlap of the maxillary central incisors over the mandibular central incisors. In class II malocclusion the overjet is increased as the maxillary central incisors are protruded.

<span class="mw-page-title-main">Bitless bridle</span> Type of horse equipment

A bitless bridle is a general term describing a wide range of headgear for horses or other animals that controls the animal without using a bit. Direction control may also be via a noseband or cavesson, if one is used. The term hackamore is the most historically accurate word for most common forms of bitless headgear. However, some modern bitless designs of horse headgear lack the heavy noseband of a true hackamore and instead use straps that tighten around a horse's head to apply pressure in various ways. These are often specifically patented and marketed as "bitless bridles", usually referencing a particular type of headgear known as the cross-under, though other designs are sometimes also given similar names.

<span class="mw-page-title-main">Splint activator</span>

The splint activator of Soulet-Besombes is a removable appliance for the treatment of dental and jaw anomalies. It is basically a stylized Activator appliance, which is however not fitted individually, but is mass-produced in various shapes and sizes. The device is also known as Position Trainer or Kaukraft-Kiefer-Former.

<span class="mw-page-title-main">Headgear</span> Any covering for the head; element of clothing which is worn on ones head

Headgear, headwear, or headdress is any element of clothing which is worn on one's head, including hats, helmets, turbans and many other types. Headgear is worn for many purposes, including protection against the elements, decoration, or for religious or cultural reasons, including social conventions.

<span class="mw-page-title-main">Abdolreza Jamilian</span>

Abdolreza Jamilian is an Iranian orthodontist and a USPTO patent holder for devices including a method and system for treatment of maxillary deficiency using miniscrews, a tongue plat, and an R-appliance.

<span class="mw-page-title-main">Anchorage (orthodontics)</span> Way of resisting tooth movement in orthodontics

Anchorage in orthodontics is defined as a way of resisting movement of a tooth or number of teeth by using different techniques. Anchorage is an important consideration in the field of orthodontics as this is a concept that is used frequently when correcting malocclusions. Unplanned or unwanted tooth movement can have dire consequences in a treatment plan, and therefore using anchorage stop a certain tooth movement becomes important. Anchorage can be used from many different sources such as teeth, bone, implants or extra-orally.

Activator Appliance is an Orthodontics appliance that was developed by Viggo Andresen in 1908. This was one of the first functional appliances that was developed to correct functional jaw in the early 1900s. Activator appliance became the universal appliance that was used widely throughout Europe in the earlier part of the 20th century.

Molar distalization is a process in the field of Orthodontics which is used to move molar teeth, especially permanent first molars, distally (backwards) in an arch. This procedure is often used in treatment of patients who have Class 2 malocclusion. The cause is often the result of loss of E space in an arch due to early loss of primary molar teeth and mesial (forward) migration of the molar teeth. Sometimes molars are distalized to make space for other impacted teeth, such as premolars or canines, in the mouth.

ACCO or Acrylic Cervical Occipital Anchorage is an appliance in field of orthodontics which is used for distalization of maxillary molars. This appliance is a removable type of appliance which was developed by Herbert I. Margolis. This appliance is intended to be worn 24 hours a day except during meals. It is one of the few removable appliances made for distalization of molars and thus require patient compliance for the treatment to be successful.

Jean Guy Eugene Raymond Delaire was a French orthodontist known for developing the Delair Facemask or reverse headgear. This facemask is used to treat children who have maxillary retrognathism and mandibular prognathism.

Open bite is a type of orthodontic malocclusion which has been estimated to occur in 0.6% of the people in the United States. This type of malocclusion has no vertical overlap or contact between the anterior incisors. The term "open bite" was coined by Carevelli in 1842 as a distinct classification of malocclusion. Different authors have described the open bite in a variety of ways. Some authors have suggested that open bite often arises when overbite is less than the usual amount. Additionally, others have contended that open bite is identified by end-on incisal relationships. Lastly, some researchers have stated that a lack of incisal contact must be present to diagnose an open bite.

The Herbst appliance is an orthodontic appliance used by orthodontists to correct class 2 retrognathic mandible in a growing patient, meaning that the lower jaw is too far back. This is also called bitejumping. Herbst appliance parts include stainless steel surgical frameworks that are secured onto the teeth by bands or acrylic bites. These are connected by sets of telescoping mechanisms that apply gentle upward and backward force on the upper jaw, and forward force on the lower jaw. The original bite-jumping appliance was designed by Dr. Emil Herbst and reintroduced by Dr. Hans Pancherz using maxillary and mandibular first molars and first bicuspids. The bands were connected with heavy wire soldered to each band and carried a tube and piston assembly that allowed mandibular movement but permanently postured the mandible forward. The appliance not only corrected a dental Class II to a dental Class I but also offered a marked improvement of the classic Class II facial profile.

References

  1. 1 2 "Protraction facemask". Dr Sylvain Chamberland Orthodontiste. 2011-09-26. Retrieved 2019-08-18.
  2. Ozkalayci, Nurhat; Cicek, Orhan (2017), "When Do Skeletal Class III Patients Wear Their Reverse Pull Headgears?", BioMed Research International, 2017: 1–5, doi: 10.1155/2017/3546262 , PMC   5362724 , PMID   28377927