Farmall 340

Last updated
Farmall 340
TypeRow-crop agricultural tractor
Manufacturer International Harvester
Production1957-1963
Length117 inches (300 cm)
Width64 inches (160 cm)
Height59 inches (150 cm) to steering wheel)
Weight4,735 pounds (2,148 kg) (gasoline), 5,195 pounds (2,356 kg) (diesel), 7,579 pounds (3,438 kg) (ballasted)
PropulsionRear wheels
Engine modelInternational Harvester C135
Gross power47 horsepower (35 kW)
PTO power34.74 horsepower (25.91 kW) (belt)
Drawbar power31.76 horsepower (23.68 kW)
Drawbar pull 5,142 pounds (2,332 kg) (gasoline)
NTTL test 665
Preceded by Farmall 350

The Farmall 340 is a medium-sized row-crop tractor, first produced as part of the Farmall line by International Harvester in 1957. The 340 was a completely new design, unrelated to its predecessor the Farmall 350. Production ran until 1963 for the Farmall model, while production under the International and International Harvester name ran until 1965.

Contents

Description

The 340 used a new 47-horsepower (35 kW)135-cubic-inch (2,210 cc) four-cylinder gasoline engine, connected to a torque amplifier that gave an effective range of ten gears. A diesel version had a 166-cubic-inch (2,720 cc) engine, with the same horsepower. The 340's new hydraulic system used transmission oil is the hydraulic fluid. The International Harvester IH 340 was the utility version, and the International 340 was the industrial version. A crawler version was sold as the T-340, or the TD-340 with a diesel engine. The Farmall 340 was offered in an orchard and grove configuration. [1] [2] [3] Crawler versions were sold until 1965. [4] About 800 were produced, the gasoline models selling for about $3,600 and the diesels for about $4,300. [5]

Comparable products

The Case 441 and Massey MF33 were comparable to the 340. [6]

Related Research Articles

<span class="mw-page-title-main">Farmall</span> Model and brand of tractors

Farmall was a model name and later a brand name for tractors manufactured by International Harvester (IH), an American truck, tractor, and construction equipment company. The Farmall name was usually presented as McCormick-Deering Farmall and later McCormick Farmall in the evolving brand architecture of IH.

<span class="mw-page-title-main">Farmall Cub</span> Motor vehicle

The Farmall Cub or International Cub was the smallest tractor manufactured by International Harvester (IH) under either the McCormick-Deering, Farmall, or International names from 1947 through 1979 in Louisville, Kentucky.

<span class="mw-page-title-main">Farmall H</span> Row crop tractor

The Farmall H is a medium-sized two-plow row crop tractor produced by International Harvester under the Farmall brand from 1939 to 1954. It was the most widely produced of International Harvester's "letter series", with approximately 390,000 produced over the 14-year run. It succeeded the Farmall F-20. The H was incrementally updated with new model numbers as the Super H, 300, and 350, but remained essentially the same machine. The original H used an International Harvester C152 4-cylinder in-line engine. Production of all versions lasted until 1963.

<span class="mw-page-title-main">Farmall M</span> Row crop tractor

The Farmall M is a large three-plow row crop tractor produced by International Harvester under the Farmall brand from 1939 to 1953. It was of International Harvester's "letter series". It succeeded the Farmall F-30. The M was incrementally updated with new model numbers as the MD Super M, Super MD Super M-TA, but remained essentially the same machine. The original M used an International Harvester C248 4-cylinder in-line engine. Production of all versions lasted until 1954, when it was replaced by the Farmall 400 which was essentially the same machine with updated sheet metal.

<span class="mw-page-title-main">Farmall C</span> Row crop tractor

The Farmall C is a small two-plow row crop tractor produced by International Harvester under the Farmall brand from 1948 to 1951. The C was developed from the Farmall B as a slightly larger, more versatile implement, raising and moving the B's offset operator seat to the centerline and increasing the wheel size to allow a straight, widely-adjustable rear axle. The C kept the International Harvester C123 engine that had been used in the Super A model. The tractor was heavier and more robust, and featured hydraulic capability from the beginning. The C was incrementally updated with new model numbers as the Super C, 200, 230 and 240, but remained essentially the same machine. The closely related successors to the C were produced until 1962.

<span class="mw-page-title-main">Farmall B</span> Row crop tractor

The Farmall B is a small one-plow row crop tractor produced by International Harvester under the Farmall brand from 1939 to 1947. It was derived from the popular Farmall A, but was offered with a narrow set of centerline front wheels instead of the A's wide front axle, allowing two-row cultivation. The operator's seat was offset to the right to allow better forward visibility.

<span class="mw-page-title-main">Farmall A</span> Row crop tractor

The Farmall A is a small one-plow row crop tractor produced by International Harvester under the Farmall brand from 1939 to 1947. The tractor was popular for its set of innovative features in a small, affordable implement. It succeeded the Farmall F-14. The A was incrementally updated with new model numbers as the Super A, 100, 130 and 140, but remained essentially the same machine. Like the smaller Farmall Cub, the Farmall A features a distinctive offset engine, displaced to the left over wide-set front wheels, to allow vision straight ahead. An International Harvester C113 4-cylinder in-line engine was used for early models, increased to an IH C123 with the A-1. The most significant change was the introduction of hydraulics with the Super A. The series was produced until 1973.

<span class="mw-page-title-main">Farmall 60 series tractors</span> Row crop tractor

The Farmall 60 series tractors are general-purpose row-crop tractors that replaced the larger models of the Farmall letter series beginning in 1958. Produced from 1958 to 1963, the Farmall 460 and 560 tractors represented a modernization of the Farmall H and Farmall M respectively, with higher-horsepower 6-cylinder engines in a restyled body. The heavy general-purpose 660 was sold under the International brand, and was a successor to the McCormick-Deering W series tractors.

<span class="mw-page-title-main">McCormick-Deering W series tractors</span> General-purpose crop tractor

The McCormick-Deering W series tractors were a range of standard-tread farming and industrial tractors produced by International Harvester that were derived from the Farmall letter series row-crop tractors of the 1940s and 1950s. Branded by International Harvester as McCormick-Deering products, with the same styling and red paint as the Farmall line, the W series had fixed wheel widths, lower height and wide front axles. Starting in 1956 the W series was integrated into the International Harvester numbering series and the McCormick-Deering branding was dropped.

<span class="mw-page-title-main">Farmall F-12</span> Row crop tractor

The Farmall F-12 is a small two-plow row crop tractor produced by International Harvester under the Farmall brand from 1932 to 1938, with approximately 123,000 produced. An improved model, the two-plow F-14, was produced beginning in 1938 and ending in 1939, when the Farmall letter series tractors were introduced.

The Farmall 04 series tractors are a family of row-crop tractors with four-cylinder engines, continuing the tradition of four-cylinder engines in Farmall and parent company International Harvester for general-purpose and row-crop tractors. In the early 1960s demand for more power led to the 06 series with six-cylinder engines. Four-cylinder engines were reserved for tractors equivalent to the Farmall H and smaller.

<span class="mw-page-title-main">Farmall 06 series tractors</span> Row-crop tractors

The Farmall 06 series tractors are a family of row-crop tractors with six-cylinder engines, providing greater horsepower than the parallel product line of four-cylinder Farmall 04 series tractors. Until the late 1950s, Farmall and parent company International Harvester tractors used four-cylinder engines for general-purpose and row-crop tractors. Demands for higher performance and greater horsepower led to broader use of six-cylinder engines, with the bulk of International's production moving to the larger engines. The Farmall 806 and 706 were introduced in 1963, with production running to 1967. The Farmall 1206 was introduced in 1965 as the most powerful tractor of its time, using a turbocharged diesel engine. Production of the 1206 also ran until 1967. The 06 series sold well and was regarded as extremely successful.

<span class="mw-page-title-main">Farmall Regular</span> Row crop tractor

The Farmall Regular, or just the Farmall, was the first in the Farmall line of general-use row-crop tractors manufactured by International Harvester. The Regular was the first affordable tractor that could be used for plowing, stationary threshing, or cultivating. For most of its product life it was marketed as the "Farmall," with the "Regular" added when the Farmall F-20 and F-30 appeared as its successors. More than 134,000 were sold from 1924 to 1931.

<span class="mw-page-title-main">Farmall eight-cylinder tractors</span> Row crop tractor family


The Farmall eight-cylinder tractor line or Farmall 08 series was briefly produced near the end of the Farmall product run, in response to pressure to increase horsepower and to match competing brands.

<span class="mw-page-title-main">Farmall France</span>

International Harvester's Farmall brand of tractors were built in France between 1951 and 1964. Initially produced from US-made components, tractors were made at the International Harvester (IH) plant in Saint-Dizier with French parts from 1952. A range of models were produced, many based on the Farmall C, with special narrow-track models for use in vineyards. The offering gradually broadened, with adaptations of IH Germany models. The Farmall brand was phased out in 1964, with subsequent machines bearing the International Harvester brand.

<span class="mw-page-title-main">John Deere Model GP</span> Row crop tractor

The John Deere Model GP tractor was a two-plow, and later a three-plow row-crop tractor produced by John Deere from 1928 to 1935. Initially called the John Deere Model C, the name was changed to GP as a result of difficulties in distinguishing between the Model C and Model D over the telephones of the time. It was intended as a response to the Farmall Regular line of general-purpose tractors produced under the Farmall brand by International Harvester..

<span class="mw-page-title-main">John Deere Model G</span> Row crop tractor

The John Deere Model G tractor was a large three-plow row-crop tractor produced by John Deere from 1937 to 1953, with successor models produced until 1961. It was followed by the 70, 720, and 730.

<span class="mw-page-title-main">John Deere Model M</span> Row crop tractor

The John Deere Model M tractor was a two-cylinder row-crop tractor produced by John Deere from 1947 to 1952, with successor models produced until 1960. It was succeeded by the updated 40, 420 and 430 models, as well as the 320 and 330 models that occupied the market positions left vacant by the more powerful 400 series models.

<span class="mw-page-title-main">Oliver 70</span> Row crop tractor

The Oliver 70 series of row-crop tractors was a series of large agricultural tractors produced from 1935 to 1967 by the Oliver Farm Equipment Company. Oliver tractors were known for their powerful engines compared to competitors, and their attention to styling. The Oliver Hart-Parr 70 marked the beginning of a strikingly-styled series of tractors that were produced under both the Oliver and the Cockshutt names. Oliver's emphasis on styling strongly influenced offerings by competing brands such as Farmall and John Deere.

<span class="mw-page-title-main">Oliver 60</span> Row crop tractor

The Oliver 60 series of row-crop tractors was a product line of agricultural tractors produced from 1940 to 1964 by the Oliver Farm Equipment Company. The 60 series was a four-cylinder follow-on to the six-cylinder Oliver 70. As the 70 was outsold by the less-expensive Farmall A, Allis-Chalmers Model B and John Deere Model B, Oliver introduced the 60 to compete.

References

  1. Pripps, Robert N. (2020). The Complete Book of Farmall Tractors. Motor Books. pp. 133–137. ISBN   978-0-7603-6389-8.
  2. "Farmall 340". TractorData. Retrieved 28 August 2021.
  3. "International Harvester 340". TractorData. Retrieved 28 August 2021.
  4. "International Harvester T-340". TractorData. Retrieved 28 August 2021.
  5. Pripps, p. 137
  6. Pripps, p. 134