Ford Mustang FR500

Last updated
FR500GT at the FIA GT3 European Championship 2008 Ford Mustang FR500GT Nr22 Oschersleben2008.jpg
FR500GT at the FIA GT3 European Championship 2008

The Ford Racing Mustang FR500 is a highly tuned race variant of the Ford Mustang, featuring a V8 engine. It is a turn key race car not designed for public roads. Each FR500 model is built with a unique Ford Racing number, instead of a DOT VIN. Each is built to order by Ford Racing. All FR500s are made at the same Flat Rock, Michigan plant as the standard Mustang.

Contents

Ford announced that it would continue to offer FR500 models in 2010.

Concept (1999)

The concept vehicle was developed by Dan Davis and the Special Vehicles Team (SVT) at Ford Motor Company. It has top speed of 281.6 km/h (175.0 mph). The car was based on the 1999 SVT Cobra, but did have some changes compared to the base car.

Engine

The slightly larger than stock (4997 cc) engine was modified by a variable intake head, later available as an aftermarket part called the FR500 cylinder head. The exhaust was a special exhaust which kept the 2.5" diameter, but had a second crossover in the shape of an X-pipe behind the rear axle just before the exhaust tips. The mufflers had flaps, which opened under high pressure, thus making the exhaust more free flowing. The exhaust was also later sold as an aftermarket part by Ford Racing as the M-5230-M58 kit. Altogether, the engine modifications resulted in a horsepower increase to 415 from the stock 320 in the Cobra engine.

Drivetrain etc.

The FR500 concept came with a six-speed Tremec T56 transmission as compared to the 1999-standard T45 5 speed. Also, the wheelbase of the car was 5 inches larger than standard, which was due to the fact that the front axle had been moved forward by 5 inches. The car also had 14" Brembo brake discs with 4 piston calipers at the front end, Lincoln LS calipers with 13" rotors on the rear, and sported the so-called FR500 18" wheels, which also became available as an addon later.

Exterior

The FR500 had a special carbon fiber hood and front fascia. The hood was more aerodynamic than the standard Cobra/GT one, and did not feature an open hole between the lights. Instead, the air for cooling and the engine was taken from under the bumper. The car also came with special C-pillar covers, giving a sleeker appearance and changing the shape of the rear windows, close to the shape that was later resurrected for the 2001 Bullit Mustang. The longer wheelbase also mandated special carbon fiber fenders. Finally, as an aerodynamic touch, the side scoops were shaved.

Road Racing

FR500C

Ford Mustang FR500C GT4 Ford Mustang FR500C GT4.jpg
Ford Mustang FR500C GT4

Powered by a 5.0L "Cammer R50" engine, it delivers 420 hp (313 kW). It includes a Tremec T56 6-speed transmission and other race-spec parts including a Grand Am-spec rollcage. It is permitted to be used in the Grand Am Grand Sport (GS) Class. [1]

The FR500C can either be obtained as a turnkey costing $125,000 or by modding an existing Mustang GT with specified parts from Ford Racing. [2]

It is also known by its nickname "Boy Racer", assigned by Ford executives.

This model won the manufacturers title in the Koni Challenge racing series in 2005 & 2008. This was after several attempts to slow the car down- such as a rearend gears change and additional weight.

FR500S

Powered by Ford's 4.6L V8 engine, it is rated at 325HP. The FR500S is often slotted in between the FR500C ('Boy Racer') and FR500GT ('Man Racer'). The car was designed by both Ford Racing and Miller Motorsports for the Ford Racing Mustang Challenge series (a racing series founded by Larry Miller). The car features similar aerodynamic parts like those used on the FR500GT, but uses a DOT approved racing [3] tire- BFGoodrich g-Force R1.

With the end of the Ford Racing Mustang Challenge, [4] the FR500S has been homologated for competition in the SCCA World Challenge GTS class.

FR500GT

Codenamed Man Racer, the 5.0L V8 engine is rated at 550 hp (410 kW). This model features all of the features of a full race car, from heavily modified suspension to the large aerodynamic parts (which are effective). It also uses a 5.0L V8 engine built by Roush/Yates.

Drag Racing

FR500CJ

The FR500CJ (Cobra Jet) was released in 2008, and was built to commemorate the 40th Anniversary of Ford winning NHRA Winternationals with 1968 Cobra Jet Mustang. Designed for Drag Strip use, the newer Cobra Jet features a supercharged 5.4L V8 400 hp (298 kW) but with the Whipple Blower makes about 900 HP engine with a 6-speed manual or 3-speed automatic transmission, one-piece driveshaft, a single-hoop driveshaft loop, Ford 9 inch rear axle, special rear control arms and anti-roll bar, Ford Racing adjustable dampeners and a drag race spring kit. Engine enhancements include the deletion of the A/C and the addition of a cold air intake, bigger throttle body, a crankshaft dampener and long-tube stainless-steel headers. The car weighs 3,300 lb (1,500 kg). [5]

The Prototype #1 vehicle was sold in 2009 Barrett-Jackson Scottsdale auction for winning bid price of $375,000. [6]

Variants

FR500C GT4

A variant based on Mustang FR500C, homologated for SRO GT4 competition. Essentially the same car as the FR500C, it has a few changes (none are aerodynamic) to make it legal for GT4 competition.

FR500C Salt Flats Racer

Paul's High Performance and Ford Racing built a Salt Flat Racer from a FR500C. This one is powered by Ford GT 5.4L engine fueled by E85 fuel. At the Bonneville Salt Flats this car reached 251 mph (404 km/h).

FR500C GT

Homologated for the 2007 season, the Mustang FR500GT is designed to compete in the FIA GT3 European Championship series. The 5.0L V8 engine is rated to produce 550 hp (410 kW) at 7200 rpm and 570 N⋅m (420 lb⋅ft) at 6000 rpm torque.

Parts

Performance parts

In addition to turn key race cars, Ford Racing also offers parts to convert stock Mustangs into race models.

Notes

  1. Grand Am Rules & Regulations
  2. "FR500C information & list of parts". Archived from the original on 2007-03-02. Retrieved 2007-01-27.
  3. "Untitled Document". Archived from the original on 2010-09-23. Retrieved 2010-09-25.
  4. "Mustang Challenge // Series News". Archived from the original on 2010-07-25. Retrieved 2010-09-25.
  5. Ford Delivers First Mustang FR500CJ Cobra Jet
  6. Barrett-Jackson 2009: Ford FR500CJ Cobra Jet Prototype

Related Research Articles

<span class="mw-page-title-main">Ford Mustang</span> American car manufactured by Ford

The Ford Mustang is a series of American automobiles manufactured by Ford. In continuous production since 1964, the Mustang is currently the longest-produced Ford car nameplate. Currently in its seventh generation, it is the fifth-best selling Ford car nameplate. The namesake of the "pony car" automobile segment, the Mustang was developed as a highly styled line of sporty coupes and convertibles derived from existing model lines, initially distinguished by "long hood, short deck" proportions.

<span class="mw-page-title-main">Ford 385 engine</span> Reciprocating internal combustion engine

The Ford 385 engine family is a series of big-block V8 engines designed and manufactured by Ford Motor Company. The family derives its name from the 3.85-inch (98 mm) crankshaft stroke of the 460 cubic-inch V8 introduced in 1968. A 429 cu in (7.0 L) version was also introduced the same year, with a 370 cu in (6.1 L) variant appearing in 1977.

<span class="mw-page-title-main">Ford Modular engine</span> Engine family by Ford Motor Company

The Ford Modular engine is Ford Motor Company's overhead camshaft (OHC) V8 and V10 gasoline-powered small block engine family. Introduced in 1990, the engine family received its “modular” designation by Ford for its new approach to the setup of tooling and casting stations in the Windsor and Romeo engine manufacturing plants.

<span class="mw-page-title-main">Shelby Mustang</span> Motor vehicle

The Shelby Mustang is a high-performance variant of the Ford Mustang built by Shelby American from 1965 to 1967 and by the Ford Motor Company from 1968 to 1970.

<span class="mw-page-title-main">Ford Mustang Mach 1</span> Motor vehicle

The Ford Mustang Mach 1 is a performance-oriented option package of the Ford Mustang muscle car, originally introduced in August 1968 for the 1969 model year. It was available until 1978, returned briefly in 2003, 2004, and most recently in 2021.

<span class="mw-page-title-main">Ford Performance Vehicles</span> Vehicle make

Ford Performance Vehicles was the Melbourne-based, premium performance arm of automobile manufacturer Ford Australia. The company produced a range of Ford-based models from 2002 to 2014 under the FPV marque name.

<span class="mw-page-title-main">Ford Mustang SVT Cobra</span> Motor vehicle

The Ford SVT Mustang Cobra is a pony car that was built by American automobile manufacturer Ford Motor Company's Special Vehicle Team division for the 1993 to 2004 model years.

<span class="mw-page-title-main">Ginetta Cars</span> British automobile manufacturer

Ginetta Cars Limited is a British specialist builder of racing and sports cars based in Garforth, Leeds, West Yorkshire.

<span class="mw-page-title-main">Daytona Prototype</span> Prototype racing car

A Daytona Prototype was a type of sports prototype racing car developed specifically for the Grand American Road Racing Association's Rolex Sports Car Series as their top class of car, which replaced their main prototype racing class, specifically Le Mans Prototypes (LMPs). The cars later competed in the merged series of the IMSA SportsCar Championship, from 2014 to 2016, before being phased out and replaced by the Daytona Prototype International class in 2017. They are named after the main series event, the Rolex 24 at Daytona.

<span class="mw-page-title-main">Boss 302 Mustang</span> Motor vehicle

The Mustang Boss 302 is a high-performance 302 cu in (4.9 L) H.O. V8-powered variant of the Ford Mustang originally produced by Ford in 1969 and 1970. Developed to meet homologation requirements to compete in Trans Am racing, it was Ford's response to the success of the Chevrolet Camaro Z/28 in the 5 L (305.1 cu in) and under SCCA series since 1967. While substantial modifications were required to the stock Boss 302 to be competitive on the track, many thousands were sold to the public in a street-legal form that included a refined high-performance motor and upgrades to the suspension and brakes over base Mustangs.

<span class="mw-page-title-main">Shelby American</span> American automobile manufacturer

Shelby American, Inc. is an American high performance automobile company founded by driver Carroll Shelby. The Shelby American name has been used by several legally distinct corporations founded by Shelby since his original shop in Venice, California began operation in 1962. The current iteration is a wholly owned subsidiary of Carroll Shelby International, Inc., a holding company formed in 2003. Carroll Shelby International's other wholly owned subsidiary is Carroll Shelby Licensing, which licenses the name and trademarks associated with Shelby to other companies. Shelby American was the first automobile manufacturer in the state of Nevada. Shelby American manufactures component automobiles, including replicas of the small-block and large-block AC Cobras, the Shelby GT350 and the GT500 Super Snake. Since 2005, Shelby American has released new models each year.

<span class="mw-page-title-main">Mercury Cyclone</span> Car model

The Mercury Cyclone is an automobile that was marketed by the Mercury division of Ford from 1964 to 1971. Introduced in 1964 as the Mercury Comet Cyclone, the Cyclone replaced the S-22 as the performance-oriented version of the Mercury Comet model line. The Cyclone became a distinct nameplate for the 1968 model year, as the Mercury Montego was phased in to replace the Comet.

Ford Mustang variants are the various versions of the Ford Mustang car, modified either by its manufacturer Ford Motor Company or by third-party companies. Ford and several third-party companies have offered many modified versions of the highly popular Mustang since its creation in 1964 in order to cater to specific portions of the marketplace outside of the mainstream. High-performance enthusiasts seek more powerful, sharper handling, sports cars such as the Shelby Mustang, the Ford Mustang Mach 1, and variants made by Roush Performance and Saleen, while collectors and purists seek limited production and alternate or nostalgic styling, such as is commonly found on many commemorative editions. Still, others were made purely for experimental concepts such as the McLaren M81 and the Ford Mustang SVO, which later influenced production model design. Most variants include both performance upgrades, and unique cosmetic treatments that are typically minimal to maintain the familiar appearance of a stock Mustang. Although most of these Mustang variants were aimed at enthusiasts, an exception was the Special Service Package which was designed specifically for law enforcement. Race variants include the FR500, Boss 302 and Boss 429.

<span class="mw-page-title-main">Saleen S281</span> Motor vehicle

The Saleen S281 is a variant introduced between the 4th and 5th generations of Ford Mustang which was produced by the American manufacturer Saleen, Inc. By 2005, Saleen departed from being a company of modifying existing Ford Mustangs as well as various other Ford automobiles, and became an Original equipment manufacturer. This was easily distinguishable with the bodywork designed by Phil Frank on the S-281's as well as the various other models offered by Saleen.

<span class="mw-page-title-main">Ford Mustang (third generation)</span> Motor vehicle

The third-generation Mustang was produced by Ford from 1979 until 1993. Built on Ford's Fox platform, it is commonly referred to as the Fox body Mustang. It evolved through several sub-models, trim levels, and drivetrain combinations during its production life. It underwent updates for the 1987 model year and seemed destined for replacement with a front-wheel drive Mazda platform. However, company executives were swayed by consumer opinion and the rear-wheel drive Mustang stayed, while the front-wheel drive version was renamed the Ford Probe. Enthusiasts group the generation into two segments: the 1979–1986 cars, with their quad headlight arrangement, and the 1987–1993 cars, with their aerodynamic composite headlamps and front fascia styling. Production ended with the introduction of the fourth-generation Mustang (SN-95) for the 1994 model year.

<span class="mw-page-title-main">Ford Mustang (fourth generation)</span> Motor vehicle

The fourth-generation Ford Mustang is an automobile that was produced by the American automobile manufacturer Ford Motor Company for the 1994 through 2004 model years. Marking the first major redesign of the Ford Mustang in fifteen years, the fourth generation of the pony car was introduced in November 1993 with the launch taking place on December 9, 1993. The design, was based on an updated version of the Fox platform and was the final vehicle underpinned with this platform. It featured styling by Bud Magaldi that incorporated some stylistic elements from the classic Mustangs. A convertible model returned, but the previous notchback and hatchback bodystyles were discontinued in favor of a conventional 2-door coupe design.

<span class="mw-page-title-main">Ford Mustang (fifth generation)</span> Motor vehicle

The fifth-generation Ford Mustang (S197) is a pony car manufactured and marketed by Ford from 2004 to 2014, for the 2005 to 2014 model years. Assembly took place at the Flat Rock Assembly Plant in Flat Rock, Michigan. The fifth generation began with the 2005 model year, and received a facelift for the 2010 model year.

<span class="mw-page-title-main">Tickford Vehicle Engineering</span> Former Australian automotive company

Tickford Vehicle Engineering (TVE) was a company responsible for numerous automotive projects and upgrades for Ford Australia between 1991 and 2002. In 1999, TVE setup Ford Tickford Experience (FTE) as a competitor to Holden Special Vehicles (HSV). In 2002, the operations changed to Ford Performance Vehicles (FPV), coinciding with Tickford's global operations being bought out by Prodrive.

<span class="mw-page-title-main">Ford Mustang (sixth generation)</span> Motor vehicle

The sixth-generation Ford Mustang (S550) is a pony car that was manufactured by Ford from 2014 until 2023. In departure from prior Mustang models, the sixth-generation Mustang included fully independent rear suspension on all models, as well as an optional 2.3L EcoBoost turbocharged and direct injected four-cylinder engine. The Mustang was introduced as a 2015 model year vehicle, marking the fiftieth anniversary of the Ford Mustang, which was revealed as a 1965 model year vehicle on April 17, 1964.

<span class="mw-page-title-main">Ford Mustang (seventh generation)</span> Motor vehicle

The seventh-generation Ford Mustang is a pony car manufactured by Ford. First shown at the 2022 North American International Auto Show, it is assembled at Ford's Flat Rock Assembly Plant and began production on May 1, 2023, initially available with either the redesigned 2.3L EcoBoost turbocharged 4-cylinder with 315 horsepower, or the revised, 4th generation Coyote V8 with 480–486 horsepower in the GT and 500 horsepower in the Dark Horse.

References