Golden Circle Air T-Bird | |
---|---|
Teratorn Tierra II | |
Role | Ultralight aircraft |
National origin | United States |
Manufacturer | Teratorn Aircraft Golden Circle Air Indy Aircraft |
Introduction | 1983 |
Status | In production |
Number built | Over 4000 |
The Golden Circle Air T-Bird is a family of high-wing, strut-braced, pusher configuration ultralight aircraft that was produced by Teratorn Aircraft of Clear Lake, Iowa from 1983 to 1989 and then Golden Circle Air of De Soto, Iowa from 1989 until the mid-2000s. From 2011-2021 the aircraft were back in production by Indy Aircraft and from 2021 on by Tbird Aircraft. The aircraft is produced as a kit for amateur construction. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14]
The original version of the T-Bird family was the Teratorn Tierra which was introduced in 1983. The aircraft achieved early success in the ultralight market, particularly in its side-by-side seating version, the Tierra II. The design passed from Teratorn to Golden Circle Air in 1989 and the aircraft was renamed the T-Bird. Golden Circle Air went out of business in the mid-2000s and the design was out of production until 2011, when Indy Aircraft resumed building them. Over 4000 of all models have been built. [2] [5] [6] [7] [8] [9] [11] [12]
The T-Bird is constructed from 6061-T6 aluminium tubing, bolted together, with the wing and tail surfaces covered in pre-sewn Mylar-coated Dacron envelopes. The cockpit area has a Lexan windshield and optional zippered cloth doors. The basic versions have conventional landing gear, with some models offering tricycle gear as an option; later models can switch quickly between the two configurations. The aircraft is also well-suited to seaplane floats. The cockpit controls consist of conventional rudder pedals and yoke control wheels or (optional) joystick. Construction time for the T-Bird I was reported as 60 hours. [1] [2] [3] [5]
The Tierra II introduced a 13-position trim system and also 13-position flaps. [3]
The T-Bird I can qualify for the US FAR 103 Ultralight Vehicles category if equipped with a light enough engine, such as the 28 hp (21 kW) Rotax 277, although reviewers have indicated that due to the high-drag design the aircraft is under-powered. [1] [2]
PilotMix describes the T-Bird I as "the most respected kit in the industry, and for good reason. It is absolutely the strongest and the easiest ultralight to build." Reviewer Andre Cliche calls it "robust...heavy and solid". [2] [4]
Reviewer Dan Johnson describes it as slow, but roomy with excellent visibility, "docile," "predictable," rugged, "dependable and enjoyable... with a good reputation," and notes its "excellent rough-field capability." [1]
Data from Teratorn [3]
General characteristics
Performance
The Advanced Aviation Explorer is a two-seat ultralight marketed in kit form, for amateur construction. It is a high-wing taildragger aircraft of pusher configuration with tandem seating.
Quicksilver is a line of single and two-place high wing, single-engine, ultralight aircraft that evolved from weight-shift hang gliders including Bob Lovejoy's High Tailer.
The Lockwood Drifter is a family of high wing, single engine, pusher configuration, open cockpit, one and two-seat kit aircraft that was first introduced in the 1980s by Maxair and remains in production today by Lockwood Aircraft of Sebring, Florida.
The Freebird II is a family of American side-by-side two-seat, high wing, tricycle gear, pusher configuration single engined kit aircraft originally designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina, and later Pro Sport Aviation of Wingate, North Carolina.
The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.
The Kolb Kolbra and King Kolbra are a family of American tandem two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that are produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.
The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The Earthstar Thunder Gull is a family of cantilever high-wing, tricycle gear ultralight aircraft, manufactured by Earthstar Aircraft of Santa Margarita, California as a kit for amateur construction or as a completed aircraft.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.
The Bailey-Moyes Dragonfly is an Australian-American two-seats-in-tandem, high-wing, strut-braced, open cockpit, conventional landing gear-equipped ultralight aircraft. The aircraft has been in production since 1990 and was designed as a special-purpose tug for hang gliders and ultralight sailplanes. It is available as a complete aircraft or as a kit for amateur construction. The aircraft has been variously produced by Moyes Microlights, Bailey-Moyes Microlights and currently LiteFlite of Botany, New South Wales, all different iterations of the same company.
The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.
The Arnet Pereyra Sabre II is an American, two-seats in side-by-side configuration, conventional landing gear-equipped, strut-braced, high-wing ultralight trainer that was produced by Arnet Pereyra Inc of Rockledge, Florida in kit form for amateur construction.
The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.
The Raj Hamsa X-Air is an Indian, two-seat, high-wing, tricycle gear, tractor configuration, ultralight aircraft produced by Raj Hamsa Ultralights of Bangalore, Karnataka in kit form, for amateur construction.
The Rainbow Aerotrike is a family of South African two-seat ultralight trikes, made by Rainbow Aircraft of Edenvale, Gauteng and available in kit form for amateur construction or fully assembled. The type has been noted for its long-distance flights.
The Antares MA-32 is the first model in a large family of Ukrainian ultralight trikes that is designed and produced by Antares Aircraft and at one time marketed by Leading Edge Air Foils as the LEAF Antares. The aircraft are supplied as kits for amateur construction.
The Airborne Edge is a line of Australian two-seat ultralight trikes designed and produced by Airborne Windsports of Redhead, New South Wales. The aircraft are supplied as a completed aircraft and not as a kit.
The Summit 2, also called the Summit II, is an American powered parachute that was originally designed and manufactured in 1999 by Aircraft Sales and Parts of Vernon, British Columbia and now produced by Summit Aerosports of Yale, Michigan.
Golden Circle Air, Inc. was an American aircraft manufacturer based in De Soto, Iowa. The company specialized in the manufacture of ultralight aircraft in the form of kits for amateur construction and ready-to-fly aircraft under the US FAR 103 Ultralight Vehicles rules.