Great Western Railway telegraphic codes were a commercial telegraph code used to shorten the telegraphic messages sent between the stations and offices of the railway.
The codes listed below are taken from the 1939 edition of the Telegraph Message Code book [1] unless stated otherwise.
The Great Western Railway (GWR) pioneered telegraph communication over the 13 miles (21 km) from Paddington to West Drayton on 9 April 1839 using the Cooke and Wheatstone telegraph equipment. Although this early system fell into disuse after a few years, from 1850 a new contract with the Electric Telegraph Company saw double-needle telegraphs working at most stations on the line; these were replaced by single-needle machines from 1860. [2] Although used primarily as a safety device to regulate the passage of trains, it was also used to pass messages between the staff. In order to do this quickly and accurately, a number of code words were used to replace complicated or regularly used phrases. The codes were changed from time to time to reflect current needs.
By 1922 most railways in the country had agreed on standard code words, although the GWR had an extended list of codes that could only be used within its own network. In 1943 all railways were brought into a single system of codes and the GWR special codes were discontinued. [3]
Note: many of these codes could have an extra letter to identify variations, such as Mink A (a 16 ft (4.9 m) ventilated van), or Mink G (a 21 ft (6.4 m) ordinary van). Most of these codes were painted onto the wagons for easy identification.
Note: many of these codes could have an extra letter to identify variations, such as Scorpion C (a 45 ft (14 m) carriage truck), or Scorpion D (a 21 ft (6.4 m) carriage truck).
The 1939 Telegraph Message Code book contains in excess of 900 code words (around half of which were standard codes also used by other railways) yet very few were the familiar codes seen painted on the side of goods wagons. [1] By using these codes long and complex sentences could be sent using just a few words. Some examples of the codes representing phrases include:
The Great Western Railway (GWR) was a British railway company that linked London with the southwest, west and West Midlands of England and most of Wales. It was founded in 1833, received its enabling act of Parliament on 31 August 1835 and ran its first trains in 1838 with the initial route completed between London and Bristol in 1841. It was engineered by Isambard Kingdom Brunel, who chose a broad gauge of 7 ft —later slightly widened to 7 ft 1⁄4 in —but, from 1854, a series of amalgamations saw it also operate 4 ft 8+1⁄2 in standard-gauge trains; the last broad-gauge services were operated in 1892.
A railroad car, railcar, railway wagon, railway carriage, railway truck, railwagon, railcarriage or railtruck, also called a train car, train wagon, train carriage or train truck, is a vehicle used for the carrying of cargo or passengers on a rail transport network. Such cars, when coupled together and hauled by one or more locomotives, form a train. Alternatively, some passenger cars are self-propelled in which case they may be either single railcars or make up multiple units.
A number of different numbering and classification schemes have been used for carriages and wagons on Britain's railways, and this page explains the principal systems. Carriages and wagons have frequently had similar arrangements for classification and numbering, so are considered together. There are also links to other pages that deal in greater depth with the particulars of individual types.
Railmotor is a term used in the United Kingdom and elsewhere for a railway lightweight railcar, usually consisting of a railway carriage with a steam traction unit, or a diesel or petrol engine, integrated into it.
The steam rail motors (SRM) were self-propelled carriages operated by the Great Western Railway in England and Wales from 1903 to 1935. They incorporated a steam locomotive within the body of the carriage.
Goods wagons or freight wagons, also known as goods carriages, goods trucks, freight carriages or freight trucks, are unpowered railway vehicles that are used for the transportation of cargo. A variety of wagon types are in use to handle different types of goods, but all goods wagons in a regional network typically have standardized couplers and other fittings, such as hoses for air brakes, allowing different wagon types to be assembled into trains. For tracking and identification purposes, goods wagons are generally assigned a unique identifier, typically a UIC wagon number, or in North America, a company reporting mark plus a company specific serial number.
The passenger coaches of the Great Western Railway (GWR) were many and varied, ranging from four and six-wheeled vehicles for the original broad gauge line of 1838, through to bogie coaches up to 70 feet (21 m) long which were in service through to 1947. Vacuum brakes, bogies and through-corridors all came into use during the nineteenth century, and in 1900 the first electrically lit coaches were put into service. The 1920s saw some vehicles fitted with automatic couplings and steel bodies.
Ben Hur trailer was the nickname of the World War II U.S. Army Trailer, 1-ton payload, 2-wheel, cargo, and the Trailer, 1-ton payload, 2-wheel, water tank, 250 gallon. Specialized variants were also manufactured.
A covered goods wagon or van is a railway goods wagon which is designed for the transportation of moisture-susceptible goods and therefore fully enclosed by sides and a fixed roof. They are often referred to simply as covered wagons, and this is the term used by the International Union of Railways (UIC). Since the introduction of the international classification for goods wagons by the UIC in the 1960s a distinction has been drawn between ordinary and special covered wagons. Other types of wagon, such as refrigerated vans and goods wagons with opening roofs, are closely related to covered wagons from a design point of view. Similar freight cars in North America are called boxcars.
The fleet of Great Western Railway wagons was both large and varied as it carried the wide variety of goods traffic on the Great Western Railway (GWR) in the United Kingdom. This was the railway company that operated for the longest period of time in the country and covered a large geographical area that included big cities such as London, industrialised areas including the West Midlands, areas of coal and mineral mining such as South Wales, and Somerset and other important agricultural districts. In 1902 the company owned 59,036 wagons, and by 1926 this had risen to 88,580.
Hurst, Nelson and Company Ltd was a railway rolling stock manufacturer based in Motherwell, Scotland. The company also built many railway wagons, as well as trams and trolleybus carosseries for several local authorities.
The Mid-Norfolk Railway has a large collection of heritage rolling stock, mostly relating to the post-war British Railways-era, from the 1950s to 1990s. The line holds several rolling-stock accomplishments:
Unlike the broad-gauge, the Victorian Railways' 2 ft 6 in narrow-gauge network never had four-wheeled trucks. Instead, a single design of 249 underframes was constructed, with identical structure, bogies, couplers and brake equipment. Different bodies were provided on these frames for each purpose. The most common, by far, was the convertible flat/open truck, followed by cattle, louvred, insulated and boxcar types.
The GWR Toad is a class of railway brake van, designed by and built for the Great Western Railway. Used by the GWR from 1894, and post-1947 by the Western Region of British Railways, its role was a safety brake on goods trains in the West of England, the Midlands and Wales.
The GWR Siphon was a series of enclosed milk churn transport wagons built by the Great Western Railway and continued by British Railways.
A steam railcar is a rail vehicle that does not require a locomotive as it contains its own steam engine. The first steam railcar was an experimental unit designed and built in 1847 by James Samuel and William Bridges Adams. In 1848, they made the Fairfield steam carriage that they sold to the Bristol and Exeter Railway, who used it for two years on a branch line.
The rolling stock of the Bodmin and Wenford Railway are the locomotives, carriages and wagons used on the Bodmin and Wenford Railway, a heritage railway in Cornwall, England.
A bogie bolster wagon is a British railway term for a wagon designed to carry long thin cargoes such as timber or rails and other steel sections. The sides and ends are minimal and there is no roof. The load is carried longitudinally and borne by three or more bolsters fixed transversely. The load is constrained sideways by movable metal stanchions fitted into the ends of the bolsters, and secured with chains and shackles.