Group 3E Series Production Cars

Last updated
Group 3E Series Production Cars
Imprezacastle.jpg
Lee Castle contested the 2008 Australian Production Car Championship in a Group 3E Subaru Impreza WRX)
Category Production Car Racing
Country Flag of Australia (converted).svg Australia
Inaugural season 1995
Tyre suppliers MRF Tyres

Group 3E Series Production Cars is an Australian motor racing formula for production based cars competing with limited modifications. Group 3E cars formerly contested the Australian Manufacturers' Championship and Australian Production Car Championship titles and compete in the annual Bathurst 12 Hour and Bathurst 6 Hour endurance races.

Contents

History

Regulations for production car racing in Australia were first formalised in 1964 when the Confederation of Australian Motor Sport introduced the Group E Series Production Touring Cars category. This was abandoned at the end of 1972.

“Series Production” made a return to Australian motor racing in 1981 when a new set of Group E regulations was issues by CAMS. [1] The new Series Production Cars were, like their predecessors, intended to be mass-produced vehicles made suitable for competition by minimal modifications. Eligible cars were limited to those with an engine capacity of less than 4500cc and only vehicles which CAMS specifically chose to include on a model eligibility list could compete. [2] Classified drivers were banned and the category was intended to be a second level category with no championship, run only at restricted race meetings.

For 1984 CAMS announced a revision of the rules, with a wider range of models now eligible to race in Group E and freely available optional equipment (such as limited slip differentials) now permitted. [3] The advent of the Bob Jane Super Series in 1984 saw the class take a major step forward. With prizemoney totalling $200,000 the Super Series was richest motor racing series in Australia at that time. Special dispensation was granted to enable classified drivers to compete and cars fitted with turbocharged engines were now permitted. [4] 1987 saw the running of the inaugural Australian Production Car Championship, open to drivers of Group E Series Production cars and contested over two races at a single race meeting at Winton Raceway in Victoria. [5]

In 1988 Group E was officially redesignated as Group 3E Series Production Cars. [6] and in the same year the Australian Production Car Championship was expanded to a series format and attracted sponsorship from the Yokohama tyre company. [7] For 1990 turbocharged cars were banned and Group 3E became a class for family orientated naturally aspirated sedans. [8] 1994 saw CAMS limit the class to front wheel drive cars of under 2.5 litre engine capacity. [9] The 2.5 litre cars would only contest one more Australian Production Car Championship as that title was replaced by the Australian GT Production Car Championship in 1996. The new title, which was contested under revised Group 3E regulations, [10] permitted a much larger variety of models to compete including GT type cars such as Porsche, Ferrari and Lotus.

The year 2000 saw the Australian GT Production Car Championship split into the Australian Nations Cup Championship (for GT type cars) and the Australian GT Production Car Championship (for other production based vehicles) with Group 3E regulations covering cars competing in both titles. [11] [12] The Australian Nations Cup Championship was moved away from Group 3E regulations for 2003 with a greater level of modifications permitted to the cars. The same applied to certain high performance models from the Australian GT Production Car Championship which would now contest the Australian GT Performance Car Championship. From this time Group 3E regulations applied only to the remaining cars which would contest the annual Australian Production Car Championship [13] resurrecting the title which was last awarded in 1995.

The Bathurst 12 Hour endurance race was revived in 2007 as an annual event open to Group 3E cars. [14] For 2008 the Australian Manufacturers' Championship title was reinstituted and contested concurrently with Australian Production Car Championship. [15] This would mark the first time since 1972 that the Australian Manufacturers title had been open to Series Production vehicles. From 2011 onwards, the Bathurst 12 Hour became open to GT3 cars and the production element of the race decreased. To provide a new showpiece event for production racing at the circuit, in 2016 the Bathurst 6 Hour was launched for series production. [16]

Related Research Articles

Group A Motorsport category for race and rally cars

Group A is a set of motorsport regulations administered by the FIA covering production derived vehicles intended for competition, usually in touring car racing and rallying. In contrast to the short-lived Group B and Group C, Group A vehicles were limited in terms of power, weight, allowed technology and overall cost. Group A was aimed at ensuring numerous entries in races of privately owned vehicles.

The Australian Touring Car Championship (ATCC) is a touring car racing award held in Australia since 1960. The series itself is no longer contested, but the title lives on, with the winner of the Repco Supercars Championship awarded the trophy and title of Australian Touring Car Champion.

The Australian Nations Cup Championship was a motor racing title sanctioned by the Confederation of Australian Motor Sport (CAMS) from 2000 to 2004.

Group C (Australia)

In relation to Australian motorsport, Group C refers to either of two sets of regulations devised by the Confederation of Australian Motor Sport (CAMS) for use in Australian Touring Car Racing from 1965 to 1984. These are not to be confused with the FIA's Group C sports car regulations, used from 1982 to 1992 for the World Endurance Championship / World Sports-Prototype Championship / World Sportscar Championship and the 24 Hours of Le Mans.

The National Series for Sports Sedans, formerly the Australian Sports Sedan Championship, is a CAMS sanctioned national motor racing title for drivers of cars complying with Australian Sports Sedan regulations. This class, essentially a silhouette racing car class, caters for cars of essentially free construction but utilising some of the bodywork of a closed, series production vehicle.

The Australian Endurance Championship is an Australian motor racing title which has been awarded by the Confederation of Australian Motor Sport in numerous years and for numerous categories since 1981.

The Australian Production Car Championship is an Australian motor racing title for production cars, sanctioned by the Confederation of Australian Motor Sport (CAMS). The championship was first contested in 1987 and from 2008 to 2015 the title was awarded to the most successful driver in the annual Australian Manufacturers' Championship series which ran on the Shannons Nationals Motor Racing Championships program.

Australian GT Championship National championship for grand tourer sports cars in Australia

The Australian GT Championship is a CAMS-sanctioned national title for drivers of GT cars, held annually from 1960 to 1963, from 1982 to 1985 and from 2005. Each championship up to and including the 1963 title was contested over a single race and those after that year over a series of races. The categories which have contested the championship have not always been well defined and often have become a home for cars orphaned by category collapse or a sudden change in regulation.

The 1986 Australian Endurance Championship was a CAMS sanctioned motor racing title open to Touring Cars as specified in the National Competition Rules of CAMS. The title, which was the sixth Australian Endurance Championship, was contested concurrently with the 1986 Australian Manufacturers' Championship, which was the sixteenth in a sequence of manufacturers championships awarded by CAMS, and the seventh to be contested under the Australian Manufacturers' Championship name.

Australian Tourist Trophy

The Australian Tourist Trophy is a Confederation of Australian Motor Sport-sanctioned national motor racing title, contested between 1956 and 1979 by Sports Cars and, since 2007, by GT cars. The trophy is currently awarded to the outright winners of the Bathurst 12 Hour.

The 2008 Australian Production Car Championship was a CAMS sanctioned Australian motor racing title for drivers of Group 3E Series Production Cars. The title was awarded in conjunction with the 2008 Australian Manufacturers' Championship and was the 15th Australian Production Car Championship.

Group E Series Production Touring Cars

Group E Series Production Touring Cars was an Australian motor racing category for production based sedans competing with limited modifications. It was current from 1964 to 1972.

The 2004 Australian Nations Cup Championship was an Australian motor racing competition for modified production-based coupes complying with "Nations Cup" regulations. Contested as part of the 2004 Procar Championship Series, it was sanctioned by the Confederation of Australian Motor Sport as a National Championship with PROCAR Australia Pty Ltd appointed as the Category Manager.

The 2008 Australian Manufacturers' Championship was a CAMS sanctioned motor racing title for car manufacturers. The championship, which was open to Group 3E Series Production Cars was the 23rd Australian Manufacturers' Championship.

The 2009 Australian GT Championship was a CAMS sanctioned national motor racing title for drivers of closed production based sports cars which are either approved by the FIA for GT3 competition or approved by CAMS as Australian GTs.

The 2010 Australian GT Championship was a CAMS sanctioned Australian motor racing championship open to closed production based sports cars which were either approved by the FIA for GT3 competition or approved by CAMS as Australian GTs. The championship, which was the 14th Australian GT Championship, incorporated drivers titles in three divisions, GT Championship, GT Challenge and GT Production. The Australian GT Sportscar Group Pty Ltd was appointed as the Category Manager by CAMS for the championship, which was promoted as the "Vodka O Australian GT Championship".

Group D Production Sports Cars was a CAMS motor racing category current in Australia from 1972 to 1981.

The 2012 Porsche City Index Australian Carrera Cup Championship was an Australian motor racing competition for Porsche 911 GT3 Cup cars. It was sanctioned by the Confederation of Australian Motor Sport (CAMS) as a National Championship, and was recognised by them as the eighth Australian Carrera Cup Championship. Porsche Cars Australia Pty Ltd was appointed as the Category Manager by CAMS for the Championship.

The 2006 Australian Performance Car Championship was a CAMS sanctioned Australian motor racing championship for production-based touring cars. It was the second championship to be contested under the Australian Performance Car Championship name with similar titles having been run in 2003 and 2004 as the Australian GT Performance Car Championship. GT Performance Racing Pty Ltd was appointed by CAMS as the Category Manager for the 2006 championship.

2013 Australian GT Championship

The 2013 Australian GT Championship was a CAMS sanctioned national motor racing championship open to GT style closed production based sports cars which were either approved by the FIA for GT3 competition or approved by CAMS as Australian GTs. It was the 17th Australian GT Championship, the twelfth to be contested over a multi-event championship, and the eighth to be contested since the title was revived in 2005. The championship was won by Klark Quinn, driving a Porsche 911 GT3-R Type 997.

References

  1. ↑ Australian Motor Racing Year, 1981/82, pages 40-44
  2. ↑ CAMS Manual of Motor Sport, 1982, page 311
  3. ↑ Australian Motor Racing Year, 1983/84, pages 78-82
  4. ↑ Australian Motor Racing Year, 1984/85, pages 62-67
  5. ↑ Australian Motor Racing Year, 1987/88, page 281
  6. ↑ CAMS Manual of Motor Sport, 1988, page 81
  7. ↑ Australian Motor Racing Year, 1988/89, pages 199-200
  8. ↑ Australian Motor Racing Year, 1990/91, pages 164-165
  9. ↑ Australian Motor Racing Year, 1994/95, page 202
  10. ↑ Australian GT Production Car Championship overview Retrieved from web.archive.org on 18 November 2008
  11. ↑ Sporting Regulations for the 2002 Australian National Cup Championship
  12. ↑ Sporting Regulations for the 2002 Australian GT Production Car Championship
  13. ↑ Sporting & Technical Regulations for the 2003 Procar Championship Series - CAMS Bulletin B03/023 of 4 March 2003
  14. ↑ 2007 Bathurst International Motor Festival - 12hour Category Supplementary Regulations – Final 10.11.06
  15. ↑ 2008 Australian Manufacturers Championship Sporting Regulations – CAMS Bulletin B08/098
  16. ↑ "Green light for Bathurst Easter 6 Hour race". Speedcafe. 15 April 2015. Retrieved 28 March 2016.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.