HMS Archer (1849)

Last updated

History
Naval Ensign of the United Kingdom.svg UK
NameHMS Archer
Ordered
  • 26 March 1846
  • Re-ordered 25 April 1847
Builder Deptford dockyard
Cost£41,404
Laid down18 October 1847
Launched27 March 1849
Commissioned2 April 1850
Honours and
awards		Baltic 1854 = 55
FateBroken up 15 March 1866
General characteristics
TypeScrew sloop
Displacement1,337 tons
Tons burthen97040/94 bm
Length
  • 186 ft 4 in (56.8 m) gundeck
  • 162 ft 6+1⁄4 in (49.5 m) keel reported for tonnage
Beam33 ft 10 in (10.3 m) maximum, 33 ft 6 in (10.2 m) reported for tonnage
Draught14 ft 3⁄4 in (4.3 m) mean
Depth of hold19 ft 0 in (5.8 m)
Installed power202 nhp, 347  ihp (259 kW)
Propulsion
  • 2-cylinder horizontal geared single-expansion steam engine
  • Single screw
Sail plan Full-rigged ship
Complement170
Armament
  • 2 × 68-pounder (87 cwt) guns
  • 10 × 32-pounder (42cwt) guns

HMS Archer was initially ordered as one of two Rifleman type gunvessels on 25 April 1846. With her construction suspended in September 1846, [1] she was reordered on as a sloop on 25 April 1847 to be constructed to a design of John Edye as approved on 25 August. [2] With the exception of two years on Baltic service during the Russian War of 1854 to 1855 she spent the majority on the West Coast of Africa on the anti-slavery patrol. This service involved anti-slavery work on the coasts of the Bight of Benin, and was notoriously unhealthy, with tropical diseases taking a heavy toll of British seamen. One of her commanders died and three others were invalided. [3] Archer was reclassified as a corvette in 1862. [1] She finally returned to Home waters, being sold for breaking in January 1866

Contents

Archer was the second named vessel since its introduction for a 12-gun gun brig launched by Perry at Blackwall on 2 April 1801 and sold on 14 December 1815. [4]

Construction

She was laid down at Deptford Dockyard on 18 October 1847 and launched on 27 March 1849. She was completed for sea on 9 March 1850 at a cost of £41,404 (including hull of £20,785). [1]

Commissioned Service

First Commission

Her first commission was on 2 April 1850 at Plymouth under Commander James N. Strange, RN for service with the West Africa Squadron performing anti-slaving patrols. By December 1852 she had returned to Home Waters and was assigned to Fishery Protection Squadron at Leith, Scotland. [3] On 15 November 1853 she was paid off at Woolwich. [5]

Second Commission

She recommissioned for service in the Baltic Sea during the war with Russia on 25 February 1854 under Captain Edmund Heathcote, RN. She returned to Home Waters in December 1855 then was assigned to the North America and West Indies Station by June 1856. She returned to pay off at Woolwich on 11 June 1857. [3] [5]

Third Commission

On 21 May 1858 she commissioned under Captain John Sanderson, RN for service on the West Coast of Africa. [3] Captain Sanderson died in 1859 being replaced by Commander Richard W. Courtenay, RN on 17 August 1859. Captain Frederick A.B. Crauford, RN took command on 4 April 1860 when Commander Courtenay was invalided. This service involved anti-slavery work on the coasts of the Bight of Benin, and was notoriously unhealthy, with tropical diseases taking a heavy toll of British seamen. She returned to Home Waters and paid off at Woolwich on 5 October 1861. [5]

Fourth Commission

Her last commission started on 30 March 1863 under Captain John Bythesea, RN for service on the West Coast of Africa. [3] When Captain Bythesea became invalided, Captain Francis Marten, RN took command on 11 April 1864. During 1865 Archer was in action against Congo River Pirates. She returned to Home Waters at the end of 1865. [5]

Disposition

Upon her arrival in Home Waters, she paid off at Woolwich on 30 January 1866. She was sold to Henry Castle & Sons, arriving at Charlton on 15 March 1866. [5]

HMS Archer was awarded the Battle Honour Baltic 1854 – 55. [6]

Archer was reclassified as a corvette in 1862, although her sister officially remained a sloop. [5]

Notes

  1. 1 2 3 Lyon Winfield, page 212
  2. ↑ Winfield, Chapter 12, Archer class
  3. 1 2 3 4 5 "HMS Archer at William Loney website" . Retrieved 2 January 2014.
  4. ↑ Colledge, Archer
  5. 1 2 3 4 5 6 Winfield, Chapter 12, Archer
  6. ↑ Winfield, Battles and Campaigns

Related Research Articles

HMS <i>Plumper</i> (1848) Sloop of the Royal Navy

HMS Plumper was part of the 1847 Program, she was ordered on the 25 of April as a steam schooner from Woolwich Dockyard with the name Pincher. However, the reference Ships of the Royal Navy, by J.J. College, (c) 2020 there is no entry that associates this name to this build. The vessel was reordered on August 12 as an 8-gun sloop as designed by John Fincham, Master Shipwright at Portsmouth. Launched in 1848, she served three commissions, firstly on the West Indies and North American Station, then on the West Africa Station and finally in the Pacific Station. It was during her last commission as a survey ship that she left her most enduring legacy; in charting the west coast of British Columbia she left her name and those of her ship's company scattered across the charts of the region. She paid off for the last time in 1861 and was finally sold for breaking up in 1865.

HMS <i>Rattler</i> (1843) Sloop of the Royal Navy

HMS Rattler was a 9-gun steam screw sloop of the Royal Navy, and one of the first British warships to be completed with screw propulsion. She was originally ordered as a paddle wheel 4-gun steam vessel from Sheerness Dockyard on 12 March 1841. She was reordered on 24 February 1842 as a propeller type 9-gun sloop from HM Royal Dockyard, Sheerness, as a new vessel. William Symonds had redesigned the ship as a screw propeller driven vessel.

HMS <i>Miranda</i> (1851) Sloop of the Royal Navy

HMS Miranda was a 14-gun wooden screw sloop of the Royal Navy. As part of the 1847 Program, she was designed by John Fincham, Master Shipwright of Portsmouth and is considered an improved Rattler with the design approved on 3 November 1847. She was ordered on the 25th of April 1847 with the name Grinder from Royal Dockyard, Sheerness. On the 3rd of November 1847 she was reordered as the Miranda from Sheerness Dockyard. Launched in 1851, she was completed to see action in the Russian War of 1854 - 55. In 1854 she was in the White Sea and participated in the bombardment of the Port of Kola. She then participated in the Sea of Azov during 1855. Two of her crew were awarded the Victoria Cross for their bravery. Towards the end of her career she transported troops during the New Zealand war. She was reclassified as a corvette by 1862, She was sold for breaking in December 1869.

HMS <i>Niger</i> (1846) Sloop of the Royal Navy

HMS Niger was originally slated to be built as a Sampson designed sloop; however, she was ordered as a First-Class sloop with screw propulsion on 20 February 1845 to be built at Woolwich Dockyard, along the design developed by Oliver Lang and with a hull like the Basilisk designed paddle sloops. Her armament and engine were to be like the Encounter Design building at Pembroke. A second vessel (Florentia) was ordered on 26 March 1846 but after her keel was laid at Pembroke Dockyard, her construction was suspended on 6 October 1846 then cancelled three years later, on 22 May 1849. Niger She conducted important propulsion trials, finally proving the superiority of screw propulsion and served in West Africa, the Crimea, China, the East Indies and Australia. She took part in the New Zealand wars in 1860 and was sold for breaking in 1869.

HMS <i>Brisk</i> (1851)

HMS Brisk was a 14-gun wooden-hulled screw sloop designed by the Committee of Reference as part of the 1847 program. She is considered an enlarged Rattler with the design approved in 1847. She was ordered on 25 April 1847 from Woolwich Dockyard as a 10-gun sloop, but the guns were later increased due to the Russian War, to 14 guns by increasing the number of 32-pounder guns. She was launched on 2 June 1851 from Woolwich Dockyard. She served in the Russian War of 1854- 55 and as part of the West African anti-slavery patrol, with a final commission on the Australian Station. She was sold in 1870 into mercantile service.

HMS <i>Malacca</i> (1853) Sloop of the Royal Navy

HMS Malacca was a 17-gun wooden sloop of the Royal Navy. She was ordered on 9 November 1847 from Moulmein, Burma to be built of teak. As a Surveyor's Department design, Malacca was based on the Conflict designed sloop which was approved on 9 December 1848. After launching in April 1853 she was commissioned the following month to be sailed to England for the fitting of her engine. She entered British Naval service in 1854 and served three commissions including action in the Russian War 1854 - 55 before being sold in 1869. Her resale to Japan, she served in the Japanese Navy as a training ship until broken in 1906.

HMS <i>Reynard</i> (1848) Sloop of the Royal Navy

HMS Reynard was part of the 1847 Program, she was ordered on 25 April as a steam schooner from Deptford Dockyard with the name ‘Plumper’. However, the reference Ships of the Royal Navy, by J.J. College, © 2020, there is no entry that associates the name Plumper to this build. The vessel was reordered on August 12th as an 8-gun sloop as designed by John Edye. She was launched in 1848, conducted anti-piracy work in Chinese waters and was wrecked near Pratas Island in the South China Sea on 31 May 1851.

HMS <i>Hermes</i> (1835) Sloop of the Royal Navy

HMS Hermes was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. Initially she was used as apackey vessel until her guns were upgraded. She was re-engined and lengthened in 1842 to 43. She spent time on various stations in the Empire. She participated in the storming of Rangoon during the Second Burmese War. She was sold for breaking in October 1864.

Conflict was originally slated to be built to the Sampson designed steam vessel rated as a Steam Vessel First Class (SV1); however, the Admiralty, first rerated the vessels as First Class Sloops on 19 April 1845 then on 9 May 1845, she was ordered from a design of Sir William Symonds,Surveyor of the Navy. Originally designated as 10-gun vessels with 400 NHP engines. She served in the Baltic during the Russian war of 1854 - 55. She was sold for breaking in 1863.

HMS <i>Desperate</i> (1849) Sloop of the Royal Navy

HMS Desperate was originally slated to be built to the Sampson designed steam vessel rated as a Steam Vessel First Class (SV1); however, the Admiralty, first rerated the vessels as First Class Sloops on 19 April 1845 then on the 9 May 1845, she was ordered as First-Class screw sloops to be built from a design of Sir William Symonds, Surveyor of the Navy. She would be a 10-gun vessel with 400 NHP engines. She served in the Baltic during the Crimean war, and as a store ship to Edward Augustus Inglefield's Arctic expedition. She was broken up by 1865.

HMS <i>Wasp</i> (1850) Sloop of the Royal Navy

HMS Wasp was an Archer type sloop ordered on 25 April 1847 from Deptford Dockyard. Two references stipulate that Parthian, ordered with Archer the year prior was renamed Wasp when ordered as a sloop. However, Parthian remained on the books at Deptford, as a Rifleman type gunvessel until cancelled in June 1849. Therefore Wasp was a new build. She served on many different stations during her career, including West Coast of Africa, in the Mediterranean and Black Sea during the Russian War of 1854 - 55, on the South East Coast of America, Cape of Good Hope where she went aground twice and the East Indies before being sold for breaking in December 1869.

HMS Medea was one of the initial steam-powered vessels built for the Royal Navy. On 10 January 1831 the new First Lord Sir James Graham gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Oliver Lang, the master shipwright of Woolwich. She was launched and completed in 1834, took part in the Syrian Coast Campaign and was broken up in 1867.

HMS Volcano was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. She was launched in 1836. Her first few commissions were on packet service in the Mediterranean and North American and West Indies Stations and on the anti-slavery patrol on the West Coast of Africa. In 1854 she was converted to a factory ship and served in the Baltic during the Russian War. She was sent to China during the Second Opium War as a factory ship. On her return she was assigned to Portsmouth, on Harbour Service as a stationary factory ship. She remained there until sold for breaking in 1894.

HMS Stromboli was initially a Steam Vessel second class designed by Sir William Symonds, Surveyor of the Navy, and built at Portsmouth. She was commissioned and participated in the bombardment of Acre in 1840, during the Russian War she was used as a troop transport in the Baltic in 1854, she was in the Black Sea and the Sea of Azov in 1855. Her last overseas posting was on the South East Coast of America. She was sold for breaking in August 1866.

HMS Vesuvius was initially a Steam Vessel second class designed by Sir William Symonds, Surveyor of the Navy, and built at Sheerness. She was commissioned and participated in the bombardment of Acre in 1840, during the Russian War she was in the Black Sea and the Sea of Azov in 1855. Her last overseas posting was in the West Indies. She was sold for breaking in June 1865.

HMS Alecto was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, prior to her tug of war with the Rattler. She spent her time in the Americas and mainly on the anti-slavery patrol off the west coast of Africa. She was broken in November 1865

HMS Prometheus was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served mainly on the west coast of Africa on the anti-slavery patrol except for a brief period on particular service in the Black Sea in late 1855.. She was sold on 5 March 1863 for breaking.

HMS Polyphemus was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, west coast of Africa and the Baltic. She was wrecked on the Baltic side Jutland on 29 January 1856.

HMS Fury was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. She was ordered on 19 February 1844. After commissioning she sailed for the East Indies and participated in action against pirate junks near Vietnam. She then was in the Black Sea for the Russian War followed by the Second Opium War with China. She was sold for breaking in July 1864.

HMS Squirrel was designed by Richard Stacey, Master Shipwright of Woolwich. Her design was based on the standardize 20-gun sixth rates. After commissioning she was assigned to Home Waters then the Mediterranean. She took a privateer in 1710. She was dismantled at Deptford with her timbers sent to Woolwich Dockyard for rebuilding as a 374-ton (bm). She was finally broken in 1749.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.