The Twin Cam 88 was a traditional design from Harley-Davidson, using two cams to drive the valvetrain, with the first being the famous '8-Valve' OHV V-twin racing models of 1915. Their 1920s single-cylinder models (the A, AA, BA, BB, and Peashooter) also used twin camshafts in the timing chest, and did their 1930s flathead engine models, like the VL and UL Big Twins, and the entire range of 45ci (750cc) V-twins from 1930 onwards: the Models D and W and their variants, such as the WLA military motorcycle and WR racing motorcycle.[2]
The Twin Cam 88 was released for the 1999 model year in September 1998.[3] The Twin Cam 96 was released for the 2007 model year.[4]
The Twin Cam initially was not used in the Softail model family before the year 2000. This was due to the chassis design and vibration transfer to the Softail frame as a result of the direct (hard) mounting of the engine. Dyna models are "rubber mounted", damping the majority of vibration transfer to the frame and rider. Another reason was that the engine and transmission on a Twin Cam are directly bolted (but are still separate units) to each other, with the chassis seat post on a Softail getting in the way of a Twin Cam transmission case. As the company determined that a rubber-mounted Softail would affect the line's visual styling, Harley solved the issue by designing an engine variant known as Twin Cam 88B.[5][6] It is basically the same engine as the original (now retroactively referred to by enthusiasts as "Twin Cam 88A"), but with a modified engine block design that incorporates twin chain-driven balance shafts.[7] The Twin Cam 96B engine was released at the same time as the Twin Cam 96A model, for the 2007 model year, and was equipped on all Softail models until it was replaced by the 103 ci version.[8]
It is however possible to mount a regular Twin Cam motor to a pre-2000 Softail (or any chassis that accepts an Evolution engine) through third-party adapters.[6]
Differences from predecessor (Evolution engine)
The engine design differed considerably from its predecessor the "Evo" although it shared some design elements with the Sportster line. The 88 represents the displacement in cubic inches of the standard engine. The bore is 3.75in (95mm) and the stroke is 4.00in (102mm), meaning the displacement is 88cuin (1,450cc). The Twin Cam 95 was introduced with the Screamin' Eagle (Later known as CVO) Models and ran until the 88 was discontinued after 2006. The Twin Cam 95 displaces 94.6cuin (1,550cc). The Twin Cam 96 displaces 96.7cuin (1,584cc). The company released 103cuin (1,690cc) for 2010 Electra Glide Ultra Limited models, and later for 2012 Softail models and 110cuin (1,801cc) for Screamin' Eagle/CVO Models.
Change
Evo
Twin Cam
Displacement
82cuin (1,340cc)
88 cu in (1,450 cc), 95 cu in (1,550 cc), 96 cu in (1,584 cc), 103 cu in (1,690 cc), 110 cu. in. (1,801 cc).
Oil pump
External. Connected through a series of gears.
Internal twin-gerotor. Connected directly to the right side pinion shaft. This pump is more efficient, maintains a higher pressure and larger volume.
Cams
Single, with 4 lobes.
One per cylinder, each with 2 lobes. This allows the push rods to be better aligned with the rocker arms.
Cam drive
Gears
Silent chain. This change was reported as necessary to meet EPA noise requirements. Many users installed aftermarket gear driven replacements to increase timing accuracy[9] and to avoid cam chain tensioner wear.
Transmission attachment
Displaced from motor
Transmission casing is attached directly to the engine.
Oil tank
Usually surrounds battery box under the seat.
Below and behind the transmission assembly (except Softails, which are same as noted for the Evo)
Combustion chamber
"D" shape
"Bathtub" shape. Allows more efficient combustion and has higher compression.
Spark firing
Wasted spark (both plugs fire at the same time). The ignition system uses single coil. Plugs are 14mm (0.55in).
No wasted spark. The ignition system employs dual coils. Plugs are 12mm (0.47in).
Cooling
Air-cooled
Also air-cooled. Increased cooling fin areas and an oil jet that sprays the bottom of the pistons provide additional cooling capability.
Development
Development of the Twin Cam started in the early 1990s, as Harley sought to address problems affecting the previous Evolution engine, particularly structural weaknesses within the crankcase, oil circulation and leakages.[10] While aftermarket firms such as S&S Cycle previously responded with stronger crankcase components for high-performance Evolutions, Harley went for a completely new design, while keeping the engine fundamentally and aesthetically similar to the traditional 45-degree, air-cooled overhead valve V-twin.[3]
The Twin Cam only shared 18 parts with its predecessor, as almost all of the components were unique to the engine. As the name implies, the engine uses two chain-driven camshafts, to comply with EPA noise regulations. The drivetrain was reinforced through a mounting scheme called the "Revised Rear Interface", allowing the transmission case to be mounted directly to the rear of the engine, with the primary drive and clutch covers playing less of a structural role; this was also partly the reason for Softails not initially receiving a Twin Cam for the 1999 model year.[10]
The early prototype Twin Cam engines had considerable trouble with the oiling system. These problems delayed release of the engine as scheduled for the 1997 model year. When the engines were run, oil came out any gasketed joint as well as the breather.[10] Harley sought the help of Paul Troxler, a young engineer from Southwest Research Institute and eventually the problem was traced to a design which drained the cam case into the crankcase, and used a single scavenge pump. Due to airflow through ports in the crankcase wall, the cam case was not draining properly. After much testing, the solution was to seal the cam case from the crankcase and use a dual scavenge system, which was incorporated into the engine, rather than as an outboard pump as used on older Big Twins since the original Knucklehead. However, oil was still not scavenging properly from the crankcase, and this was traced to an acoustic phenomenon due to the caliber of the scavenge inlet. Restricting the diameter of the inlet, a counter-intuitive solution, solved that problem.[11]
Harley-Davidson, Inc. is an American motorcycle manufacturer headquartered in Milwaukee, Wisconsin, United States. Founded in 1903, it is one of two major American motorcycle manufacturers to survive the Great Depression along with its historical rival, Indian Motorcycles. The company has survived numerous ownership arrangements, subsidiary arrangements, periods of poor economic health and product quality, and intense global competition to become one of the world's largest motorcycle manufacturers and an iconic brand widely known for its loyal following. There are owner clubs and events worldwide, as well as a company-sponsored, brand-focused museum.
Indian Motorcycle is an American brand of motorcycles owned and produced by American automotive manufacturer Polaris Inc.
The Honda Shadow refers to a family of cruiser-type motorcycles made by Honda since 1983. The Shadow line features motorcycles with a liquid-cooled 45 or 52-degree V-twin engine ranging from 125 to 1,100 cc engine displacement. The 250 cc Honda Rebel is associated with the Shadow line in certain markets.
A softail motorcycle intentionally looks like vintage motorcycles with a rigid hard-tail frame that has a triangle of steel tubes at the rear axle, like on a bicycle frame, but on a Softail these tubes are actually a triangular swingarm, with the shock absorber(s) hidden, as opposed to clearly visible regular twin shocks on both sides of the rear wheel on standard bikes. Since the introduction of the Harley-Davidson FXST Softail in 1983 as a registered trademark of the Motor Company, softail has become a genericized trademark for other models of cruiser motorcycles with rear suspensions hidden for retro style reasons. This was done even though the rear wheel was often hidden behind bags or exhaust pipes.
Victory Motorcycles was an American motorcycle brand based in Spirit Lake, Iowa, United States. It began selling its vehicles in 1998, and began winding down operations in January 2017 to be succeeded by the revived traditional American motorcycle brand Indian, which are both owned by parent company Polaris Industries.
The Vulcan name has been used by Kawasaki for their custom or touring bike since 1984, model designation VN, using mostly V-twin engines ranging from 125 to 2,053 cc.
A motorcycle engine is an engine that powers a motorcycle. Motorcycle engines are typically two-stroke or four-stroke internal combustion engines, but other engine types, such as Wankels and electric motors, have been used.
The Harley-Davidson Sportster is a line of motorcycles produced continuously since 1957 by Harley-Davidson. Sportster models are designated in Harley-Davidson's product code by beginning with "XL". In 1952, the predecessors to the Sportster, the Model K Sport and Sport Solo motorcycles, were introduced. These models K, KK, KH, and KHK of 1952 to 1956 had a sidevalve engine, whereas the later XL Sportster models use an overhead valve engine. The first Sportster in 1957 had many of the same details of the KH including the frame, fenders, large gas tank and front suspension.
The Evolution engine is an air-cooled, 45-degree, V-twin engine manufactured from 1984 by Harley-Davidson for the company's motorcycles. It was made in the 1,340 cc (82 cu in) displacement for Harley-Davidson Big V-twins bikes, replacing the Shovelhead engine until 2000 when the last EVO was placed in a production factory custom FXR4. In 1999, it was replaced by the Harley-Davidson Twin Cam 88 in the Touring and Dyna model and in 2000 in the Softail models. Also available in the Sportster model beginning in 1986, it was made in the 1,100 cc (67 cu in) displacement until 1988 and is still made in the 883 cc (53.9 cu in) and 1,200 cc (73 cu in) displacements for the Harley-Davidson Sportster, replacing the ironhead Sportster engine.
The Shovelhead engine is a motorcycle engine that was produced by Harley-Davidson from 1966 to 1984, built as a successor to the previous Panhead engine. When the engine was first produced, the Shovelhead had a shallower combustion chamber, larger valve drop for both intake and exhaust, better porting, and stronger valves and pistons. This gave the new engine an extra 10 horsepower, along with a different appearance. The engine gained the nickname “Shovelhead” due to the look of the rocker covers having the appearance of an old coal shovel that was flipped upside down, giving the appearance of a shovel. While the engine did have problems earlier in its timeline, the new and improved motor gave Harley-Davidson a 26% sales increase.
Harley-Davidson FL is a model designation used for Harley-Davidson motorcycles since 1941, when F referred to the new large capacity 74 cui (1200cc) variant of the V-2 Overhead valve engine (″Knucklehead″) that was introduced in 1936 as Model E with 61 cui (1000cc). The presence of an additional letter L indicated higher compression, offering more power but requiring higher octane gasoline. In 1950s, the low compression version was discontinued, and in 1952 also the low capacity EL, making FL the standard engine and model designation for decades to come.
The Harley-Davidson Super Glide also known as the Street Bob was a motorcycle made by the Harley-Davidson. Reputed to be the first factory custom motorcycle, it originated Harley-Davidson's FX series of motorcycles by mating Sportster components, most notably the front end, with the chassis of their larger big twin motorcycles. Super Glide models from 1991 to 2018 were based on the Dyna Glide chassis which has a wider variety of front ends and trim levels, and for a time filled the intermediate niche between the smallest and largest Harley-Davidson models; the Dyna platform has since been discontinued for the 2018 model year in favor of the new Softail frame, with some models from the Dyna nameplate being carried over to the Softail line.
The Harley-Davidson XA was a flat-twin, shaft drive motorcycle made by Harley-Davidson for the US Army during World War II.
The Harley-Davidson VRSC, or V-Rod, is a line of V-twin cruiser motorcycles made by Harley-Davidson from 1999 until 2017. They are often called muscle bikes for their relatively high power output. The V-Rods are the first street motorcycles made by Harley-Davidson with overhead camshafts and liquid cooling.
The Harley-Davidson XR-750 is a racing motorcycle made by Harley-Davidson since 1970, primarily for dirt track racing, but also for road racing in the XRTT variant. The XR-750 was designed in response to a 1969 change in AMA Grand National Championship rules that leveled the playing field for makes other than Harley-Davidson, allowing Japanese and British motorcycles to outperform the previously dominant Harley-Davidson KR race bike. The XR-750 went on to win the most races in the history of American Motorcyclist Association (AMA) racing.
Harley-Davidson CVO for motorcycles are a family of models created by Harley-Davidson for the factory custom market. For every model year since the program's inception in 1999, Harley-Davidson has chosen a small selection of its mass-produced motorcycle models and created limited-edition customizations of those platforms with larger-displacement engines, costlier paint designs, and additional accessories not found on the mainstream models. Special features for the CVO lineup have included performance upgrades from Harley's "Screamin' Eagle" branded parts, hand-painted pinstripes, ostrich leather on seats and trunks, gold leaf incorporated in the paint, and electronic accessories like GPS navigation systems and iPod music players.
The Harley-Davidson Model W, also known as the Sport Twin, is a motorcycle made by Harley-Davidson from 1919 to 1923. Unusually for a Harley-Davidson motorcycle, the Model W had a flat-twin engine and a trailing link fork. The Model W set speed records on runs from New York City to Chicago and from the Canada–United States border to the Mexico–United States border. Slow home market sales led to the end of production after four years.
The Harley-Davidson Milwaukee-Eight engine is the ninth generation of "big twin" engines developed by the company, but only Harley's third all-new Big Twin in 80 years, first introduced in 2016. These engines differ from the traditional Harley Big Twin engines in that there are four valves per cylinder, totaling eight valves, hence the name. It also marked a return to the single-camshaft configuration as used on previous Harley Big Twin Engines from 1936 to 1999. In addition, the engines all have internal counterbalancers, whereas Twin Cams were counterbalanced only on Softail models, where the engine was rigidly mounted.
The Harley-Davidson Fat Boy, is a V-twin softail cruiser motorcycle with solid-cast disc wheels. Designed by Willie G. Davidson and Louie Netz, Harley-Davidson built a prototype Fat Boy in Milwaukee for the Daytona Bike Week rally at Daytona Beach in 1988 and 1989. Fat Boys produced from 1990-2017 are coded FLSTF, and FLFB from 2018.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
