Honda H5 transmission

Last updated
H5
Overview
Manufacturer Honda
Production20002015
Body and chassis
Class 5-speed transverse automatic transmission
Chronology
Predecessor B7XA
MPYA

The H5 is Honda's first 5-speed automatic transmission.

Applications: [1]

*The H5 transmission was redesigned with a stronger case and four shafts versus three in the earlier H5 transmissions. The four shaft H5 transmissions are much more robust and do not exhibit the same failure rate as the three shaft H5. The new design first entered service in the 2005 Acura RL. All heavier vehicles eventually moved to this design in the following years until it was ultimately replaced by the H6, which also uses four shafts.

See also

Related Research Articles

<span class="mw-page-title-main">Acura</span> Luxury and performance vehicle brand by Honda

Acura is the luxury and performance division of Japanese automaker Honda, based primarily in North America. The brand was launched on March 27, 1986, marketing luxury and performance automobiles. Acura sells cars in the United States, Canada, Mexico, Panama, and Kuwait. The company has also previously sold cars in Mainland China, Hong Kong, Russia, and Ukraine. Plans to introduce Acura to the Japanese domestic market in the late 2000s did not eventuate due to the financial crisis of 2007–2008.

<span class="mw-page-title-main">Acura TSX</span> Compact executive car

The Acura TSX is a compact executive car manufactured by Honda and sold through its Acura division from 2003 to 2014. The TSX spanned two generations, both derived from the corresponding Japanese/European versions of the Honda Accord, which were more compact and sporting-oriented than its larger North American counterpart, the latter platform which also used for the Acura TL which slotted above the TSX in Acura's lineup. All TSXs were built in Sayama, Saitama, Japan.

<span class="mw-page-title-main">Acura TL</span> Motor vehicle

The Acura TL is a car that was manufactured by Acura, the luxury division of Honda. It was introduced in 1995 to replace the Acura Vigor and was badged for the Japanese-market from 1996 to 2000 as the Honda Inspire and from 1996 to 2004 as the Honda Saber. The TL was Acura's best-selling model until it was outsold by the MDX in 2007. In 2005, it ranked as the second best-selling luxury sedan in the United States behind the BMW 3 Series, but sales decreased after the 2008 model year. Four generations of the Acura TL were produced, with the final fourth generation TL premiering in 2008 as a 2009 model and ending production in 2014, when it was replaced together with the TSX by the TLX.

<span class="mw-page-title-main">Honda Inspire</span> Motor vehicle

The Honda Inspire is a mid-size sedan derived from the Honda Accord chassis. The first Inspire debuted in late 1989 as the Accord Inspire, a sister nameplate to the Honda Vigor. It was sold at different retail channels in Japan, known as Honda Verno for the Vigor/Saber, and as the Inspire at Honda Clio stores.

<span class="mw-page-title-main">Acura MDX</span> Mid-size luxury crossover SUV

The Acura MDX is a mid-size luxury crossover SUV with three-row seating produced by the Japanese automaker Honda under its luxury Acura division since 2000. The alphanumeric moniker stands for "Multi-Dimensional" luxury. It has ranked as the second-best selling mid-size luxury SUV after the Lexus RX in the U.S.

<span class="mw-page-title-main">Acura CL</span> Motor vehicle

The Acura CL is a midsize grand tourer manufactured by Honda's Acura brand from 1996 until 2003. The CL is often thought to have been a replacement for the Acura Legend coupe. It was not directly related to the first gen TL either, a Japanese-built model which replaced the Vigor and had a longitudinal engine layout. With the advent of the second generation TL in 1999, the transverse engined CL became more precisely a TL coupe. All Acura CLs were built at Honda's plant in East Liberty, Ohio, which is also the plant that builds the Honda Civic. The second generation TL and the Honda Accord upon which the Acura CLs were based, are built at Honda's plant in Marysville, Ohio, a few miles away from East Liberty. The CL was the first Acura to be built in the United States.

<span class="mw-page-title-main">Honda J engine</span> Reciprocating internal combustion engine

The J-series is Honda's fourth production V6 engine family introduced in 1996, after the C-series, which consisted of three dissimilar versions. The J-series engine was designed in the United States by Honda engineers. It is built at Honda's Anna, Ohio, and Lincoln, Alabama, engine plants.

Variable Cylinder Management (VCM) is Honda's term for its variable displacement technology, which saves fuel by using the i-VTEC system to disable one bank of cylinders during specific driving conditions—for example, highway driving. The second version of VCM (VCM-2) took this a step further, allowing the engine to go from 6 cylinders, down to 4, and further down to 3 as the computer sees fit. The most recent version of VCM (VCM-3) reverted to the previous 3- and 6-cylinder operation.

Honda Manufacturing of Alabama (HMA) is an automobile factory located in Lincoln, Alabama. It builds light truck Honda vehicles for sale in North America. Production began on November 14, 2001 and was the first Honda factory to both produce engines and assemble vehicles under the same roof. HMA is the sole manufacturer of the Honda Odyssey, Honda Passport, Honda Pilot, and Honda Ridgeline.

<span class="mw-page-title-main">Honda K engine</span> Reciprocating internal combustion engine

The Honda K-series engine is a line of four-cylinder four-stroke car engine introduced in 2001. The K-series engines are equipped with DOHC valvetrains and use roller rockers on the cylinder head to reduce friction. The engines use a coil-on-plug, distributorless ignition system with a coil for each spark plug. This system forgoes the use of a conventional distributor-based ignition timing system in favor of a computer-controlled system that allows the ECU to control ignition timings based on various sensor inputs. The cylinders have cast iron sleeves similar to the B- and F-series engines, as opposed to the FRM cylinders found in the H- and newer F-series engines found only in the Honda S2000.

<span class="mw-page-title-main">Honda Canada Inc.</span> Automobile manufacturer

Honda Canada Inc. is the Canadian regional subsidiary of the Honda Motor Company. Founded in 1969, Honda has been building cars in Canada since 1986 in Alliston, Ontario and head office in Markham, Ontario.

Advanced Compatibility Engineering is the marketing name given to an automobile body structure design by Honda. It claims to distribute collision energy evenly and redirect it away from the passenger compartment, while at the same time, minimizing damage to other impacted vehicles. This is accomplished by using numerous grades of steel which crumple in key areas and remain rigid in others. It is standard on all Honda and Acura models as of the 2017 model year.

Super Handling-All Wheel Drive (SH-AWD) is a full-time, fully automatic, all-wheel drive traction and handling system, which combines front-rear torque distribution control with independently regulated torque distribution to the left and right rear wheels. This way the system freely distributes the optimum amount of torque to all four wheels according to the driving conditions. The system was announced in April 2004, and was introduced in the North American market in the second generation 2005 model year Acura RL, and in Japan as the fourth generation Honda Legend.

Honda of Canada Manufacturing is located in Alliston, Ontario and is the automobile manufacturing division of Honda Canada Inc.

<span class="mw-page-title-main">Honda Accord (North America seventh generation)</span> Motor vehicle

In the U.S., the seventh generation North American Honda Accord is a mid-size car that was available as a four-door sedan or a two-door coupe and was produced by Honda from September 2002 to 2007. The sedan was also marketed in parts of Latin America, Asia, Middle East, Caribbean, Australia and New Zealand markets, and also known as the Honda Inspire in Japan from 2003. The North American Honda Accord, with modifications for local market needs, was the launch vehicle of Honda in the South Korean market with sales beginning from May 20, 2004.

<span class="mw-page-title-main">American Honda Motor Company</span> American automobile distributor

The American Honda Motor Company, Inc. is the North American subsidiary of the Honda Motor Company. It was founded in 1959. The company combines product sales, service and coordinating functions of Honda in North America, and is responsible for distribution, marketing and sales of Honda and Acura brand automobiles, Honda Powersports products, Honda Power Equipment products, Honda Engines products, Honda Marine engines, and the HondaJet aircraft.

The A-Spec and Type-S marques represent the high-performance divisions of cars produced by Acura. Acura utilized the Type R marque for their high-performance division of cars from 1997 to 2001, when they produced the Acura Integra Type R. The first vehicle offered as a Type-S variant was the 2001 Acura CL, and the first vehicle offered as an A-Spec variant was the 2003 Acura TL in Canada and the 2002 Acura RSX in the US.

References

  1. Honda Transmissions: List of Honda Transmissions, Hondamatic, Honda H4a Transmission, Honda H4 Transmission, Honda H5 Transmission Archived 2023-04-16 at the Wayback Machine , by General Books LLC, dated September 2010, ISBN   9781158398478