Hunter Plastics Limited was a major manufacturer and supplier of plastic plumbing products based in Kent.
Ronald "Eddy" Edmondson (1917–2007) was a qualified architect and surveyor and joined the Royal Artillery in World War II. At the end of the War he was stationed in Turin, Italy, and became interested in a nearby factory where the Germans had been experimenting with plastic injection moulding. Returning home after the War, Eddy rented a corner of a factory in Hither Green and set up his own plastic moulding company, Plastiers Limited (Lewisham) on 18 October 1946.
He carried out early pioneering work with a variety of plastic moulded products and machinery. He trade-moulded plastic products for many different applications and customers, from table mats, brooches and earrings, ring cases (for wedding and engagement rings) and plastic chandeliers. [1]
As the business grew Eddy and the team moved from Hither Green to New Eltham and then in 1962 moved to Belvedere.
With the move to Belvedere, production began on extruding rainwater gutter and pipes. All through the 1960s Plastiers began acquiring and registering businesses, and in 1965 they created The Hunter Group. In 1966 the Replant Works of Black Clawson, a printing machinery manufacturer in Nathan Way, Plumstead became available and Eddy saw the opportunity to bring all the Hunter Group companies together. [1]
The Hunter Group commissioned the largest, at that time, injection moulding machine in the world, the Cravens HPM 2000-IX-700, capable of a shot weight up to 25 kg [2]
Eddy Edmondson's grandfather was Hunter Edmondson (born 1852). Hunter Edmondson was named after his paternal grandmother, Mary Hunter (born about 1782 in the Lake District). [3]
Hunter Plastics Limited was incorporated on 21 July 1967 under the name Hunter Plastic Industries Limited and the next year, with the financial assistance of Hambros Bank, [4] [5] it launched its own range of PVC rainwater, soil and waste products called the Hunter Series 1970+.
Also in 1968 Hunter Plastics purchased another site in Nathan Way to house the extrusion hall. [6] In the event, this never happened and the building is now the Hunter fittings plant. [7]
In the 1970s the company focused more on rainwater and drainage products and a PVC underground drainage system was added to the portfolio in 1971. Hunters quickly gained a reputation for its superior rainwater systems and was the first company to launch gutter fittings that did not rely on adhesive to hold the rubber seals in place. By 1972 Hunter Plastics employed 364 staff. [8] Throughout the 1970s Hunter was very successful - at the time PVCu was displacing traditional materials cast-iron gutters and soil pipes, lead waste pipes, earthenware soil pipes and so the business grew every year as traditional materials lost market share.
Entering the 1980s, competition in the PVCu industry was increasing and the Hunter Group made a series of acquisitions to spread their product mix, among them Greenwood Airvac (1982), Waterloo Grill Company and Waterloo BV (1983). In the late '80s the Group appointed its first non-Edmonson Managing Director Ron Broome (who had previously worked with Hunter on a project with Tate and Lyle in Nigeria).
In 1991 the Edmondson family sold Hunter Plastics to ETEX, an international building products group. Since then Hunter has continued developing a wide portfolio of innovative products, including Surefit rainwater fittings that incorporate many novel features. Hunter have also been able to exploit the knowledge from within the ETEX Group and in 1998 launched Plumber's Bits an extensive range of high quality plastic products for plumbers. In 2003 Etex plastics manufacturing companies were reorganised, Hunter Plastics forming part of the worldwide Aliaxis group. In March 2006 Aliaxis took the decision to merge the production, sales and administration functions of Hunter Plastics and Multikwik.
In 2007 Hunter Plastics started to move its operations from Nathan Way to share a site with Marley Plumbing and Drainage at Lenham, Kent. [9] Marley manufactures similar product ranges to Hunter [10] and is also owned by the same parent company, Aliaxis. The movement of all manufacturing to Lenham was complete by the end of 2009, and then in January 2010 Hunter Plastics sold its manufacturing assets to a sister company, DHM Plastics Limited who in return contracted to supply Hunter Plastics with all necessary products "at a price that is competitive with the costs previously incurred." [11] In the meantime, the logistics function remained in Nathan Way until it also moved to Lenham in the first half of 2011. [12]
With effect from 1 January 2013 Hunter Plastics Limited sold its trade and business to DHM and consequently ceased to trade and became dormant. [13]
Plumbing is any system that conveys fluids for a wide range of applications. Plumbing uses pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids. Heating and cooling (HVAC), waste removal, and potable water delivery are among the most common uses for plumbing, but it is not limited to these applications. The word derives from the Latin for lead, plumbum, as the first effective pipes used in the Roman era were lead pipes.
A thermoplastic, or thermosoftening plastic, is any plastic polymer material that becomes pliable or moldable at a certain elevated temperature and solidifies upon cooling.
Injection moulding is a manufacturing process for producing parts by injecting molten material into a mould, or mold. Injection moulding can be performed with a host of materials mainly including metals, glasses, elastomers, confections, and most commonly thermoplastic and thermosetting polymers. Material for the part is fed into a heated barrel, mixed, and injected into a mould cavity, where it cools and hardens to the configuration of the cavity. After a product is designed, usually by an industrial designer or an engineer, moulds are made by a mould-maker from metal, usually either steel or aluminium, and precision-machined to form the features of the desired part. Injection moulding is widely used for manufacturing a variety of parts, from the smallest components to entire body panels of cars. Advances in 3D printing technology, using photopolymers that do not melt during the injection moulding of some lower-temperature thermoplastics, can be used for some simple injection moulds.
In modern plumbing, a drain-waste-vent is a system that allows air to enter the plumbing system to maintain proper air pressure to enable the removal of sewage and greywater from a dwelling. Drain refers to water produced at fixtures such as sinks, and showers; waste refers to water from toilets. As the water runs down, proper venting is required to allow water to flow freely, and avoid a vacuum from being created. As the water runs down air must be allowed into the waste pipe either through a roof vent (external), or an internal vent.
Plastics engineering encompasses the processing, design, development, and manufacture of plastics products. A plastic is a polymeric material that is in a semi-liquid state, having the property of plasticity and exhibiting flow. Plastics engineering encompasses plastics material and plastic machinery. Plastic machinery is the general term for all types of machinery and devices used in the plastics processing industry. The nature of plastic materials poses unique challenges to an engineer. Mechanical properties of plastics are often difficult to quantify, and the plastics engineer has to design a product that meets certain specifications while keeping costs to a minimum. Other properties that the plastics engineer has to address include: outdoor weatherability, thermal properties such as upper use temperature, electrical properties, barrier properties, and resistance to chemical attack.
Cross-linked polyethylene, commonly abbreviated PEX, XPE or XLPE, is a form of polyethylene with cross-links. It is used predominantly in building services pipework systems, hydronic radiant heating and cooling systems, domestic water piping, insulation for high tension electrical cables, and baby play mats. It is also used for natural gas and offshore oil applications, chemical transportation, and transportation of sewage and slurries. PEX is an alternative to polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) or copper tubing for use as residential water pipes.
Designated as an American National Standard, the Uniform Plumbing Code (UPC) is a model code developed by the International Association of Plumbing and Mechanical Officials (IAPMO) to govern the installation and inspection of plumbing systems as a means of promoting the public's health, safety and welfare.
A pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members.
Plastics extrusion is a high-volume manufacturing process in which raw plastic is melted and formed into a continuous profile. Extrusion produces items such as pipe/tubing, weatherstripping, fencing, deck railings, window frames, plastic films and sheeting, thermoplastic coatings, and wire insulation.
A fitting or adapter is used in pipe systems to connect straight sections of pipe or tube, adapt to different sizes or shapes, and for other purposes such as regulating fluid flow. These fittings are used in plumbing to manipulate the conveyance of water, gas, or liquid waste in domestic or commercial environments, within a system of pipes or tubes.
A rain gutter, eavestrough, eaves-shoot or surface water collection channel is a component of a water discharge system for a building. It is necessary to prevent water dripping or flowing off roofs in an uncontrolled manner for several reasons: to prevent it damaging the walls, drenching persons standing below or entering the building, and to direct the water to a suitable disposal site where it will not damage the foundations of the building. In the case of a flat roof, removal of water is essential to prevent water ingress and to prevent a build-up of excessive weight.
Plastic pipe is a tubular section, or hollow cylinder, made of plastic. It is usually, but not necessarily, of circular cross-section, used mainly to convey substances which can flow—liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipes are far stiffer per unit weight than solid members.
Payless DIY was a chain of DIY stores in the United Kingdom during the 1980s.
Supreme Industries Limited is an Indian plastics company, based in Mumbai. The company manufactures industrial and engineering molded furniture products, storage and material handling crates, multi-layer sheets, multi-layer films, packaging films, expanded polyethylene foam, PVC pipes and fittings, molded furniture, sataranj mats, disposable EPS containers.
Pegler Yorkshire is a British manufacturer of valves and other engineering products. It is part of the Flow Control division of Aalberts.
Plastic is the generic name for a family of synthetic materials derived from petrochemicals. It is often product of two or more components.
Mueller Industries is an American manufacturing company that specializes in Piping, Industrial Metals and Climate machinery. It was founded in 1917 and is included on the Fortune 1000 list in 2022. The head office of the company is located in Memphis, Tennessee. Mueller Industries, Inc. is a multi-billion dollar revenue company that is publicly traded. The company has operations throughout the United States, Canada, Mexico, China, South Korea, the Middle East and Great Britain. The current CEO of the company is Gregory L. Christopher, appointed in 2009.
The Kampala Cement Company Limited (KCCL) is a manufacturer of cement in Uganda.
Skipper Limited is an Indian transmission and distribution structure manufacturing company, founded in 1981. It is headquartered in Kolkata, India. The company is a part of the SK Bansal Group, promoted by Sajan Kumar Bansal. Skipper Limited operates in the Power transmission and distribution and polymer pipes and fittings segment with presence across sub-segments such as Towers, EPC, Monopoles and Poles. It is the third largest company in India in terms of manufacturing capacity of Power T&D structures. It exports to over forty countries across South America, Europe, Africa, the Middle East, South Asia and Australia.
agru Kunststofftechnik Gesellschaft m.b.H. is a company with global operations in engineering plastics based in Bad Hall, Austria, and was founded in 1948 by Alois Gruber senior. AGRU manufactures and supplies pipeline systems, semi-finished products, concrete protection liners, and geomembranes made of engineered plastics. As one of the 130 largest industrial companies in Austria, and one of Upper Austrias' TOP 50 biggest Companies, AGRU employs 1020 staff and has global sales of EUR 375 million (2017). In addition to the five factories at the global headquarters in Bad Hall, the company operates production sites in the United States, Germany, Poland and China. The export share is over 90%. Sales partners in more than 150 countries distribute products from AGRU, for which approximately 100,000 tons of plastic are processed annually.