| HD.31, HD.32, and HD.34 | |
|---|---|
 | |
| The prototype HD.31 demonstrating at Coventry Airport in June 1954 | |
| Role | Airliner |
| National origin | France |
| Manufacturer | Hurel-Dubois |
| First flight | 27 January 1953 (HD.31) 29 December 1953 (HD.32) |
| Primary user | Institut Géographique National |
| Number built | 11 |
The Hurel-Dubois HD.31, HD.32, and HD.34 were a family of civil aircraft produced in France in the 1950s, based on Maurice Hurel's high-aspect ratio wing designs.
Tests with the Hurel-Dubois HD.10 research aircraft had validated Hurel's ideas about the practicality of such wings, and the French government agreed to sponsor the construction of two prototypes of a medium-range airliner utilising this same principle. These aircraft, the HD.31 and HD.32 were conventional designs in all respects other than their unorthodox wings, and differed from one another only in their powerplants, although both were later converted to use the same engines. The twin-tails originally fitted were also later replaced by a large single tail fin assisted by smaller auxiliary fins. With their new engines and tails, they were redesignated HD.321.01 and HD.321.02. Apart from the HD.34 survey aircraft, all had fixed, faired tricycle undercarriages.
Two HD.31s were ordered by the French government but only one was built, the Wright Cyclone-powered HD.31 F-WFKU flew on the 27 January 1953. The company then produced a Pratt & Whitney R-1830-92-powered variant, the HD.32. Other than the engines it was the same as the HD.31. Keeping the original twin tails of the prototype the first HD.32 flew on 29 December 1953. The engines were changed to 1525 hp Wright 982-4 engines and to counter the increased power the twin fin was replaced by a single one and the type was redesigated the HD.321. The second HD.32 which first flew in February 1955 was also modified to HD.321 standard.
Air France originally placed an order for 24 aircraft in November 1953 to use as feederliners, it was followed by an order for four for the Institut Géographique National and four for Aigle Azur. With these orders discussion took place with SNCASE to build and market up to 150 aircraft. None were actually built for Air France or Aigle Azur but the IGN continued to be interested in an aerial photography variant to replace the Boeing B-17 Flying Fortress the company was then using. Eight aircraft were ordered by the IGN, based at Creil airfield to the north of Paris. The aircraft's wing design made it ideal for long-duration, low-speed flight, ideal for aerial photography and survey work. These machines were designated HD.34 and were fitted with an extensively glazed nose and an offset retractable nosewheel. They flew with IGN between the late 1950s and mid 1970s. A single example remains airworthy, operated by the Association des Mécaniciens-Pilotes d'Aéronefs Anciens.
The Aeronatique Naval evaluated the HD.31 and the company proposed an anti-submarine warfare variant to meet a requirement for 100 aircraft but nothing materialised.
France Of the HD.31, HD.32, and HD.34 family, there have been two accidents, both involving Hurel-Dubois HD.32s;
Data from Jane's All the World's Aircraft 1958–59 [8]
General characteristics
Performance
The Centaurus was the final development of the Bristol Engine Company's series of sleeve valve radial aircraft engines. The Centaurus is an 18-cylinder, two-row design that eventually delivered over 3,000 hp (2,200 kW). The engine was introduced into service late in the Second World War and was one of the most powerful aircraft piston engines to see service.
The Curtiss Falcon was a family of military biplane aircraft built by the American aircraft manufacturer Curtiss Aeroplane and Motor Company during the 1920s. Most saw service as part of the United States Army Air Corps as observation aircraft with the designations O-1 and O-11, or as the attack aircraft designated the A-3 Falcon.
The Curtiss C-46 Commando is a low-wing, twin-engine aircraft derived from the Curtiss CW-20 pressurised high-altitude airliner design. Early press reports used the name "Condor III" but the Commando name was in use by early 1942 in company publicity. It was used primarily as a cargo aircraft during World War II, with fold-down seating for military transport and some use in delivering paratroops. Mainly deployed by the United States Army Air Forces, it also served the U.S. Navy/Marine Corps, which called it R5C. The C-46 filled similar roles as its Douglas-built counterpart, the C-47 Skytrain, with some 3,200 C-46s produced to approximately 10,200 C-47s.
The Wright R-1820 Cyclone 9 is an American radial engine developed by Curtiss-Wright, widely used on aircraft in the 1930s through 1950s. It was produced under license in France as the Hispano-Suiza 9V or Hispano-Wright 9V, and in the Soviet Union as the Shvetsov M-25.
The Dassault MD 315 Flamant is a French light twin-engined transport airplane built shortly after World War II by Dassault Aviation for the French Air Force.
The Breguet 19 was a sesquiplane bomber and reconnaissance aircraft which was also used for long-distance flights and was designed by the French Breguet company and produced from 1924.
The Miles M.57 Aerovan was a British twin-engined short-range low-cost transport aircraft designed and produced by Miles Aircraft. It was primarily used for freight and passenger services.
The Miles M.33 Monitor was a twin-engined British target tug aircraft designed and built by Miles Aircraft towards the end of the Second World War. Intended for use by the Royal Air Force and the Fleet Air Arm, the aircraft did not enter service with either.
The Sud-Ouest S.O.30 Bretagne was a 1940s French airliner built by Sud-Ouest.
The Bréguet 761/763/765 are a family of 1940s and 1950s French double-deck transport aircraft produced by Bréguet Aviation. The aircraft were normally called the Deux-Ponts (Double-Decker) but it was not an official name.
The Dewoitine D.338 was a 1930s French 22-passenger airliner built by Dewoitine.
The Caproni Ca.113 was an advanced training biplane produced in Italy and Bulgaria in the early 1930s. Designed as a follow-on to the Ca.100, it was a more powerful and robust aircraft capable of aerobatics. It was a conventional design with two cockpits in tandem, single-bay staggered wings of equal span, and mainwheels covered by large spats.
The Curtiss T-32 Condor II was a 1930s American biplane airliner and bomber aircraft built by the Curtiss Aeroplane and Motor Company. It was used by the United States Army Air Corps as an executive transport.
The Vultee V-1 was a 1930s American single-engined airliner built by the Airplane Development Corporation, designed by Gerard Vultee and financed by automobile manufacturer Errett Cord.
The Hurel-Dubois HD.10 was a French research aircraft first flown in 1948 to investigate Maurice Hurel's ideas about high aspect ratio wings. It was a single-seat monoplane with a retractable tricycle undercarriage and twin tails, featuring a very high aspect-ratio wing of 32.5:1. This was mounted above the aircraft's enclosed cockpit and braced with struts. Construction was of metal throughout. Between 1948 and 1954, this aircraft accumulated some 218 hours and 27 minutes of flight time and is now preserved in the Musée de l'Air et de l'Espace in Paris.
The Morane-Saulnier Alcyon is a two or three-seat basic training monoplane designed and built in France by Morane-Saulnier.
The Handley Page HP.32 Hamlet was a British six-passenger monoplane transport designed and built by Handley Page. Only one was built to order of the Air Ministry, first flown with three-engines, later changed to two then back to three engines.
The Nord 2100 Norazur was a 1940s French military transport monoplane designed and built at Courbevoie near Paris by SNCAN.
The Hurel-Dubois Miles HDM.105 was a transport aircraft fitted with very high aspect ratio wings for research purposes, building on research carried out with the Hurel-Dubois HD.10, and a stepping point to the planned production HDM.106 Caravan. The HDM.105/HDM.106 provided the starting point for the design of the Short SC.7 Skyvan.