IBM MTCS

Last updated


MTCS (Minimum Teleprocessing Communications System) was a transaction processor that ran on IBM mainframe systems under OS/VS1 and DOS/VS. [1]

Contents

MTCS was available from IBM and designed for rapid, low to medium-volume online processing. This process was entirely interactive (screen-oriented using 3270 display terminals).

The 'official' version of MTCS was a single thread only and was a forerunner of CICS before it was released. An unofficial and multi-threaded version of MTCS was developed by Littlewoods Pools, UK at the same time as a multi-threaded "MTCS bridge" (middleware MTCS simulator) became available for running MTCS transactions directly under CICS. This version was also used by other customers including Granada Productions under a license agreement.

Transactions

An MTCS transaction is a set of operations which together perform a task. Usually, the majority of transactions are relatively simple tasks such as updating the balance of an account.

MTCS applications comprise transactions which were written in IBM Basic Assembly Language and interfaced with 3270 terminals.

Each MTCS program was initiated using a transaction identifier. MTCS screens were sent as native 3270 datastreams to the terminal.

History

The first release of MTCS was made available prior to the first release of CICS in the late 1960s. A forerunner of MTCS was known as "FASTER" and was a higher level BTAM based product that controlled IBM 2260 display terminals

Further reading

According to IBM System/360 and System/370 Bibliography of September 1974 (GA22-6822-21, File No. S360/S370-00), [2] MTCS is described by the following manuals:

See also

Related Research Articles

<span class="mw-page-title-main">MVS</span> Operating system for IBM mainframes

Multiple Virtual Storage, more commonly called MVS, is the most commonly used operating system on the System/370, System/390 and IBM Z IBM mainframe computers. IBM developed MVS, along with OS/VS1 and SVS, as a successor to OS/360. It is unrelated to IBM's other mainframe operating system lines, e.g., VSE, VM, TPF.

Systems Network Architecture (SNA) is IBM's proprietary networking architecture, created in 1974. It is a complete protocol stack for interconnecting computers and their resources. SNA describes formats and protocols but, in itself, is not a piece of software. The implementation of SNA takes the form of various communications packages, most notably Virtual Telecommunications Access Method (VTAM), the mainframe software package for SNA communications.

<span class="mw-page-title-main">Conversational Monitor System</span> Operating system

The Conversational Monitor System is a simple interactive single-user operating system. CMS was originally developed as part of IBM's CP/CMS operating system, which went into production use in 1967. CMS is part of IBM's VM family, which runs on IBM mainframe computers. VM was first announced in 1972, and is still in use today as z/VM.

<span class="mw-page-title-main">CICS</span> IBM mainframe transaction monitor

IBM CICS is a family of mixed-language application servers that provide online transaction management and connectivity for applications on IBM mainframe systems under z/OS and z/VSE.

Disk Operating System/360, also DOS/360, or simply DOS, is the discontinued first member of a sequence of operating systems for IBM System/360, System/370 and later mainframes. It was announced by IBM on the last day of 1964, and it was first delivered in June 1966. In its time, DOS/360 was the most widely used operating system in the world.

A transaction processing system (TPS) is a software system, or software/hardware combination, that supports transaction processing.

<span class="mw-page-title-main">IBM TPNS</span> Test automation tool developed by IBM

Teleprocessing Network Simulator (TPNS) is an IBM licensed program, first released in 1976 as a test automation tool to simulate the end-user activity of network terminal(s) to a mainframe computer system, for functional testing, regression testing, system testing, capacity management, benchmarking and stress testing.

Basic Telecommunications Access Method (BTAM) is a low-level programming interface specified by IBM for use on the IBM System/360 for start-stop and binary synchronous telecommunications terminals. Later, IBM specified higher-level interfaces QTAM and TCAM.

<span class="mw-page-title-main">OS/VS1</span> IBM operating system

Operating System/Virtual Storage 1, or OS/VS1, is a discontinued IBM mainframe computer operating system designed to be run on IBM System/370 hardware. It was the successor to the Multiprogramming with a Fixed number of Tasks (MFT) option of System/360's operating system OS/360. OS/VS1, in comparison to its predecessor, supported virtual memory. OS/VS1 was generally available during the 1970s and 1980s, and it is no longer supported by IBM.

The history of IBM mainframe operating systems is significant within the history of mainframe operating systems, because of IBM's long-standing position as the world's largest hardware supplier of mainframe computers. IBM mainframes run operating systems supplied by IBM and by third parties.

Telecommunications Access Method (TCAM) is an access method, in IBM's OS/360 and successors computer operating systems on IBM System/360 and later, that provides access to terminals units within a teleprocessing network.

DUCS was a teleprocessing monitor from CFS Inc. It was one of two early local teleprocessing packages for IBM's DOS/VSE environment. DUCS provided an interface and access method for programmers to 'talk' to monitors. Such access methods later became known as APIs.

Westi was one of two early local teleprocessing packages for IBM's DOS/VSE environment. Westi stood for Westinghouse Terminal Interactive. Westi provided an interface and access method for programmers to 'talk' to monitors and handle data entry. Such access methods later became known as APIs and the handlers a form of transaction processing.

<span class="mw-page-title-main">IBM 3767</span>

IBM 3767 Communication Terminal is a serial printer terminal that employed dot matrix print-head technology and, for the first time, the Synchronous Data Link Control (SDLC) communications protocol set under IBM's Systems Network Architecture (SNA). It was introduced in 1974 and was used widely during the late 1970s to 1990s, for attachment to IBM System/360 and System/370 mainframe computers and IBM System/7 as an alternative to a 2741 typewriter terminal.

The IBM Kanji System was announced in 1971 to support Japanese language processing on the IBM System/360 computers. It was later enhanced by the support of IBM System/34, IBM 5550 and DOS/V.

A teleprocessing monitor is a control program that monitors the transfer of data between multiple local and remote terminals to ensure that the transaction processes completely or, if an error occurs, to take appropriate actions.

The IBM Administrative Terminal System (ATS/360) provided text- and data-management tools for working with documents to users of IBM System/360 systems.

The IBM Storage and Information Retrieval System, better known by the acronym STAIRS, was a program providing storage and online free-text search of text data. STAIRS ran under the OS/360 operating system under the CICS or IMS transaction monitors, and supported IBM 3270 display terminals.

FASTER was a transaction processor that ran on IBM mainframe systems under OS/MFT.

References

  1. ↑ Stiefel, Mal (29 March 1976). "Third-Party 360 Saving Former 370 User $4,000/Mo". Computerworld . 10 (13): 29. ISSN   0010-4841 – via Google Books. IBM's Minimum Teleprocessing Communications System software package, which supervises the remote operations, was moved to the 360/40 from the 370/125 without modification, he noted.
  2. ↑ IBM System/360 and System/370 Bibliography (PDF). IBM Corporation. 1974.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.