IEC Technical Committee 57 is one of the technical committees of the International Electrotechnical Commission (IEC). TC 57 is responsible for development of standards for information exchange for power systems and other related systems including Energy Management Systems, SCADA, distribution automation & teleprotection.
TC 57 consists of several working groups, each of which is responsible for development of standards within its domain. The active working groups are listed below.
TC 57 Working Groups | ||||
---|---|---|---|---|
Working Group | Details | Standards Developed or related | ||
WG 3 | Telecontrol & Teleprotection standards | IEC 60870-5 | ||
WG 10 | IED communications & associated data models in power systems | IEC 61850 | ||
WG 13 | Software interfaces for operation and planning of the electric grid | IEC 61970 | ||
WG 14 | Enterprise business function interfaces for utility operations | IEC 61968 | ||
WG 15 | Data & Communication Security | IEC 62351 | ||
WG 16 | Standards related to energy market communications | IEC 62325 | ||
WG 17 | Communication systems for Distributed Energy Resources (DER) | IEC 61850-7-420 | ||
WG 18 | Communication systems for Hydroelectric power plants | IEC 61850-7-410 | ||
WG 19 | Interoperability within TC57 in the long term | standards for integration of CIM & SCL | ||
WG 20 | Planning of power line carrier systems | |||
WG 21 | Other communication technologies | KNX (IEC 14543), BACnet (ISO 16484-5), Echonet (14543-4), Profibus & Profinet (IEC 61158/IEC 61784), LonTalk (IEC 14908.1)... |
The International Organization for Standardization is an independent, non-governmental, international standard development organization composed of representatives from the national standards organizations of member countries. Membership requirements are given in Article 3 of the ISO Statutes.
In electrical engineering and power system automation, the International Electrotechnical Commission 60870 standards define systems used for telecontrol. Such systems are used for controlling electric power transmission grids and other geographically widespread control systems. By use of standardized protocols, equipment from many different suppliers can be made to interoperate. IEC standard 60870 has six parts, defining general information related to the standard, operating conditions, electrical interfaces, performance requirements, and data transmission protocols. The 60870 standards are developed by IEC Technical Committee 57.
ISO/IEC JTC 1, entitled "Information technology", is a joint technical committee (JTC) of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Its purpose is to develop, maintain and promote standards in the fields of information and communications technology (ICT).
ISO/IEC JTC 1/SC 22 Programming languages, their environments and system software interfaces is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) that develops and facilitates standards within the fields of programming languages, their environments and system software interfaces. ISO/IEC JTC 1/SC 22 is also sometimes referred to as the "portability subcommittee". The international secretariat of ISO/IEC JTC 1/SC 22 is the American National Standards Institute (ANSI), located in the United States.
International Standard IEC/ISO 81346 series "Industrial systems, installations and equipment and industrial products – structuring principles and reference designations" defines the rules for reference designation systems (RDS). It is published as a double logo standard prepared by IEC technical committee 3: Information structures and elements, identification and marking principles, documentation and graphical symbols, in cooperation with ISO technical committee 10: Technical product documentation. The 81346 series replaces the deprecated IEC 61346:1996.
IEC 61968 is a series of standards under development that will define standards for information exchanges between electrical distribution systems. These standards are being developed by Working Group 14 of Technical Committee 57 of the International Electrotechnical Commission. IEC 61968 is intended to support the inter-application integration of a utility enterprise that needs to collect data from different applications that are legacy or new and each has different interfaces and run-time environments. IEC 61968 defines interfaces for all the major elements of an interface architecture for distribution management systems (DMS) and is intended to be implemented with middleware services that broker messages among applications.
IEC 60870 part 5 is one of the IEC 60870 set of standards which define systems used for telecontrol in electrical engineering and power system automation applications. Part 5 provides a communication profile for sending basic telecontrol messages between two systems, which uses permanent directly connected data circuits between the systems. The IEC Technical Committee 57 have developed a protocol standard for telecontrol, teleprotection, and associated telecommunications for electric power systems. The result of this work is IEC 60870-5. Five documents specify the base IEC 60870-5:
ISO/IEC JTC 1/SC 27 Information security, cybersecurity and privacy protection is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). ISO/IEC JTC 1/SC 27 develops International Standards, Technical Reports, and Technical Specifications within the field of information security. Standardization activity by this subcommittee includes general methods, management system requirements, techniques and guidelines to address information security, cybersecurity and privacy. Drafts of International Standards by ISO/IEC JTC 1 or any of its subcommittees are sent out to participating national standardization bodies for ballot, comments and contributions. Publication as an ISO/IEC International Standard requires approval by a minimum of 75% of the national bodies casting a vote. The international secretariat of ISO/IEC JTC 1/SC 27 is the Deutsches Institut für Normung (DIN) located in Germany.
IEC 62325 is a set of standards related to deregulated energy market communications, based on the Common Information Model. IEC 62325 is a part of the International Electrotechnical Commission's (IEC) Technical Committee 57 (TC57) reference architecture for electric power systems, and is the responsibility of Working Group 16 (WG16).
ISO/IEC JTC 1/SC 39 Sustainability for and by Information Technology is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of sustainability and resource efficiency through Information Technology. The international secretariat of ISO/IEC JTC 1/SC 39 is the American National Standards Institute (ANSI), located in the United States.
ISO/IEC JTC 1/SC 7 Software and systems engineering is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of engineering of software products and systems. The international secretariat of ISO/IEC JTC 1/SC 7 is the Bureau of Indian Standards (BIS) located in India.
ISO/IEC JTC 1/SC 25 Interconnection of information technology equipment is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1, of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of interconnection of information technology equipment. The international secretariat of ISO/IEC JTC 1/SC 25 is the Deutsches Institut für Normung (DIN) located in Germany.
ISO/IEC JTC 1/SC 28 Office equipment is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates international standards, technical reports, and technical specifications within the field of office equipment and products, and systems composed of combinations of office equipment. The group's main focus lies within the area of printers and copiers. The international secretariat of ISO/IEC JTC 1/SC 28 is the Japanese Industrial Standards Committee (JISC) located in Japan.
ISO/IEC JTC 1/SC 2 Coded character sets is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), that develops and facilitates standards within the field of coded character sets. The international secretariat of ISO/IEC JTC 1/SC 2 is the Japanese Industrial Standards Committee (JISC), located in Japan. SC 2 is responsible for the development of the Universal Coded Character Set standard, which is the international standard corresponding to the Unicode Standard.
ISO/IEC JTC 1/SC 32 Data management and interchange is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of data management and interchange. The international secretariat of ISO/IEC JTC 1/SC 32 is the American National Standards Institute (ANSI) located in the United States.
ISO/IEC JTC 1/SC 29, entitled Coding of audio, picture, multimedia and hypermedia information, is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It develops and facilitates international standards, technical reports, and technical specifications within the field of audio, picture, multimedia, and hypermedia information coding. SC 29 includes the well-known JPEG and MPEG experts groups, and the standards developed by SC 29 have been recognized by nine Emmy Awards.
ISO/IEC JTC 1/SC 17 Cards and security devices for personal identification is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of identification cards and personal identification. The international secretariat of ISO/IEC JTC 1/SC 17 is the British Standards Institution (BSI) located in the United Kingdom.
The International Electrotechnical Vocabulary (IEV) is managed list of terms and definitions organized by the International Electrotechnical Commission (IEC), which is grouped in classes. It serves to promote the global unification of terminology in the field of electrotechnology, electronics and telecommunications. It is developed by the IEC Technical Committee 1 (Terminology), and published as both the IEC 60050 series of standards and online as the Electropedia. The Electropedia database contains English and French definitions for more than 22 000 concepts, and provides terms in up to 18 other languages.
ISO/IEC JTC 1/SC 42 Artificial Intelligence is a standardization subcommittee of the Joint Technical Committee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). ISO/IEC JTC 1/SC 42 develops and facilitates the development of international standards, technical reports, and technical specifications within the fields of Artificial Intelligence (AI). The international secretariat of ISO/IEC JTC 1/SC 42 is the American National Standards Institute (ANSI), located in the United States of America. The Chair of SC 42 is Wael William Diab. The first meeting of the committee took place in Beijing, China in April 2018. SC 42 meets face-to-face twice a year in an opening and closing plenary format with its subgroups meeting concurrently during the week. SC 42 organizes bi-annual AI workshops that target all stakeholders interested in AI and the committee's work.