Imidoyl chloride

Last updated
Imidoyl chloride functional group Imidoyl chloride functional group.png
Imidoyl chloride functional group

Imidoyl chlorides are organic compounds that contain the functional group RC(NR')Cl. A double bond exist between the R'N and the carbon centre. These compounds are analogues of acyl chloride. Imidoyl chlorides tend to be highly reactive and are more commonly found as intermediates in a wide variety of synthetic procedures. Such procedures include Gattermann aldehyde synthesis, Houben-Hoesch ketone synthesis, and the Beckmann rearrangement. Their chemistry is related to that of enamines and their tautomers when the α hydrogen is next to the C=N bond. [1] Many chlorinated N-heterocycles are formally imidoyl chlorides, e.g. 2-chloropyridine, 2, 4, and 6-chloropyrimidines.

Contents

Synthesis and properties

Imidoyl halides are synthesized by combining amides and halogenating agents. The structure of the carboxylic acid amides plays a role in the outcome of the synthesis. Imidoyl chloride can be prepared by treating a monosubstituted carboxylic acid amide with phosgene. [1]

RC(O)NHR’ + COCl2 → RC(NR’)Cl + HCl + CO2

Thionyl chloride is also used. [2]

Imidoyl chlorides are generally colorless liquids or low-melting solids that are sensitive to both heat and especially moisture. In their IR spectra these compounds exhibit a characteristic νC=N band near 1650–1689 cm−1. Although both the syn and anti configurations are possible, most imidoyl chlorides adopt the anti configuration. [1]

Structure of the imidoyl chloride C6F5N=C(Cl)C6H4-4-Me (color code:yellow = F, green = Cl; violet=N) YUXJIK.png
Structure of the imidoyl chloride C6F5N=C(Cl)C6H4-4-Me (color code:yellow = F, green = Cl; violet=N)

Reactivity

Imidoyl chlorides react readily with water, hydrogen sulfide, amines, and hydrogen halides. Treating imidoyl chlorides with water forms the corresponding amide:

RC(NR’)Cl + H2O → RCONHR’ + HCl

Aliphatic imidoyl chlorides are more sensitive toward hydrolysis than aryl derivatives. Electron-withdrawing substituents decrease the reaction rate. Imidoyl chlorides react with hydrogen sulfide to produce thioamides: [1]

RC(NR’)Cl + H2S → RC(S)NHR’ + HCl

When amines are treated with imidoyl chlorides, amidines are obtained. [1]

RC(NR’)Cl + 2R”NH2 → RC(NR’)NHR” + R”NH3Cl

When R' ≠ R", two isomers are possible.

Upon heating, imidoyl chlorides also undergo dehydrohalogenation to form nitriles: [1]

RC(NR’)Cl → RC≡N + R’Cl

Treatment of imidoyl chloride with hydrogen halides, such as HCl, forms the corresponding iminium chloride cations: [1]

RC(NR’)Cl + HCl → [RC(NHR’)Cl]+Cl−

Applications

Imidoyl chlorides are useful intermediates in the syntheses of several compounds, including imidates, thioimidates, amidines, and imidoyl cyanides. Most of these syntheses involve replacing the chloride with alcohols, thiols, amines, and cyanates, respectively. [1] Imidoyl chlorides can also undergo Friedel-Crafts reactions to install an imine groups on aromatic substrates. If the nitrogen of the imidoyl chloride has two substituents, the resulting chloroiminium ion is vulnerable to attack by aromatic rings without the need for a Lewis acid to remove the chloride first. This reaction is called the Vilsmeier–Haack reaction, and the chloroiminium ion is referred to as the Vilsmeier reagent. [4] [5] [6] After attaching the iminium ion to the ring, the functional group can later be hydrolyzed to a carbonyl for further modification. The Vilsmeier-Haack reaction can be a useful technique to add functional groups to an aromatic ring if the ring contains electron-withdrawing groups, which make using the alternative Friedel-Crafts reaction difficult.

Imidoyl chlorides can be easily halogenated at the α carbon position. [1] By treating imidoyl chlorides with hydrogen halide, will cause all α hydrogens to be replaced with the halide. This method can be an effective way to halogenate many substances. Imidoyl chlorides can also be used to form peptide bonds by first creating amidines and then allowing them to be hydrolyzed to the amide. This approach may prove to be a useful route to synthesizing synthetic proteins. [1]

Imidoyl chlorides can be difficult to handle. Imidoyl chlorides react readily with water, which makes any attempt to isolate and store them for long periods of time difficult. Further, imidoyl chlorides tend to undergo self-condensation at higher temperatures if the imidoyl chloride has an α CH group. At even higher temperatures, the chlorine of the imidoyl chloride tends to be eliminated, leaving the nitrile. Because of these complications, imidoyl chlorides are typically prepared and used immediately. More stable intermediates are being sought, with substances such as imidoylbenzotriazoles being suggested. [7]

Related Research Articles

<span class="mw-page-title-main">Imine</span> Organic compound or functional group containing a C=N bond

In organic chemistry, an imine is a functional group or organic compound containing a carbon–nitrogen double bond. The nitrogen atom can be attached to a hydrogen or an organic group (R). The carbon atom has two additional single bonds. Imines are common in synthetic and naturally occurring compounds and they participate in many reactions.

In organic chemistry, an acyl chloride is an organic compound with the functional group −C(=O)Cl. Their formula is usually written R−COCl, where R is a side chain. They are reactive derivatives of carboxylic acids. A specific example of an acyl chloride is acetyl chloride, CH3COCl. Acyl chlorides are the most important subset of acyl halides.

In chemistry, halogenation is a chemical reaction that entails the introduction of one or more halogens into a compound. Halide-containing compounds are pervasive, making this type of transformation important, e.g. in the production of polymers, drugs. This kind of conversion is in fact so common that a comprehensive overview is challenging. This article mainly deals with halogenation using elemental halogens (F2, Cl2, Br2, I2). Halides are also commonly introduced using salts of the halides and halogen acids. Many specialized reagents exist for and introducing halogens into diverse substrates, e.g. thionyl chloride.

In organic chemistry, an aryl halide is an aromatic compound in which one or more hydrogen atoms, directly bonded to an aromatic ring are replaced by a halide. The haloarene are different from haloalkanes because they exhibit many differences in methods of preparation and properties. The most important members are the aryl chlorides, but the class of compounds is so broad that there are many derivatives and applications.

<span class="mw-page-title-main">Acyl halide</span> Oxoacid compound with an –OH group replaced by a halogen

In organic chemistry, an acyl halide is a chemical compound derived from an oxoacid by replacing a hydroxyl group with a halide group.

<span class="mw-page-title-main">Oxalyl chloride</span> Chemical compound

Oxalyl chloride is an organic chemical compound with the formula (COCl)2. This colorless, sharp-smelling liquid, the diacyl chloride of oxalic acid, is a useful reagent in organic synthesis.

<span class="mw-page-title-main">Thionyl chloride</span> Inorganic compound (SOCl2)

Thionyl chloride is an inorganic compound with the chemical formula SOCl2. It is a moderately volatile, colourless liquid with an unpleasant acrid odour. Thionyl chloride is primarily used as a chlorinating reagent, with approximately 45,000 tonnes per year being produced during the early 1990s, but is occasionally also used as a solvent. It is toxic, reacts with water, and is also listed under the Chemical Weapons Convention as it may be used for the production of chemical weapons.

<span class="mw-page-title-main">Amidine</span> Organic compounds

Amidines are organic compounds with the functional group RC(NR)NR2, where the R groups can be the same or different. They are the imine derivatives of amides (RC(O)NR2). The simplest amidine is formamidine, HC(=NH)NH2.

The Vilsmeier–Haack reaction is the chemical reaction of a substituted amide (1) with phosphorus oxychloride and an electron-rich arene (3) to produce an aryl aldehyde or ketone (5). The reaction is named after Anton Vilsmeier and Albrecht Haack.

<span class="mw-page-title-main">Tantalum(V) chloride</span> Chemical compound

Tantalum(V) chloride, also known as tantalum pentachloride, is an inorganic compound with the formula TaCl5. It takes the form of a white powder and is commonly used as a starting material in tantalum chemistry. It readily hydrolyzes to form tantalum(V) oxychloride (TaOCl3) and eventually tantalum pentoxide (Ta2O5); this requires that it be synthesised and manipulated under anhydrous conditions, using air-free techniques.

<span class="mw-page-title-main">Phosphoryl chloride</span> Chemical compound

Phosphoryl chloride is a colourless liquid with the formula POCl3. It hydrolyses in moist air releasing phosphoric acid and fumes of hydrogen chloride. It is manufactured industrially on a large scale from phosphorus trichloride and oxygen or phosphorus pentoxide. It is mainly used to make phosphate esters such as tricresyl phosphate.

Nucleophilic acyl substitution describe a class of substitution reactions involving nucleophiles and acyl compounds. In this type of reaction, a nucleophile – such as an alcohol, amine, or enolate – displaces the leaving group of an acyl derivative – such as an acid halide, anhydride, or ester. The resulting product is a carbonyl-containing compound in which the nucleophile has taken the place of the leaving group present in the original acyl derivative. Because acyl derivatives react with a wide variety of nucleophiles, and because the product can depend on the particular type of acyl derivative and nucleophile involved, nucleophilic acyl substitution reactions can be used to synthesize a variety of different products.

<span class="mw-page-title-main">Trimethylsilyl chloride</span> Chemical compound

Trimethylsilyl chloride, also known as chlorotrimethylsilane is an organosilicon compound (silyl halide), with the formula (CH3)3SiCl, often abbreviated Me3SiCl or TMSCl. It is a colourless volatile liquid that is stable in the absence of water. It is widely used in organic chemistry.

<span class="mw-page-title-main">Alpha-Haloketone</span>

In organic chemistry, an α-haloketone is a functional group consisting of a ketone group or more generally a carbonyl group with an α-halogen substituent. α-haloketones are alkylating agents. Prominent α-haloketones include phenacyl bromide and chloroacetone.

In organic chemistry, the Buchwald–Hartwig amination is a chemical reaction for the synthesis of carbon–nitrogen bonds via the palladium-catalyzed coupling reactions of amines with aryl halides. Although Pd-catalyzed C-N couplings were reported as early as 1983, Stephen L. Buchwald and John F. Hartwig have been credited, whose publications between 1994 and the late 2000s established the scope of the transformation. The reaction's synthetic utility stems primarily from the shortcomings of typical methods for the synthesis of aromatic C−N bonds, with most methods suffering from limited substrate scope and functional group tolerance. The development of the Buchwald–Hartwig reaction allowed for the facile synthesis of aryl amines, replacing to an extent harsher methods while significantly expanding the repertoire of possible C−N bond formation.

Stephen aldehyde synthesis, a named reaction in chemistry, was invented by Henry Stephen (OBE/MBE). This reaction involves the preparation of aldehydes (R-CHO) from nitriles (R-CN) using tin(II) chloride (SnCl2), hydrochloric acid (HCl) and quenching the resulting iminium salt ([R-CH=NH2]+Cl−) with water (H2O). During the synthesis, ammonium chloride is also produced.

In organic chemistry, thiocarboxylic acids are organosulfur compounds related to carboxylic acids by replacement of one of the oxygen atoms with a sulfur atom. Two tautomers are possible: a thione form and a thiol form. These are sometimes also referred to as "carbothioic O-acid" and "carbothioic S-acid" respectively. Of these the thiol form is most common.

<span class="mw-page-title-main">Sulfonamide</span> Organosulfur compounds containing –S(=O)2–N< functional group

In organic chemistry, the sulfonamide functional group is an organosulfur group with the structure R−S(=O)2−NR2. It consists of a sulfonyl group connected to an amine group. Relatively speaking this group is unreactive. Because of the rigidity of the functional group, sulfonamides are typically crystalline; for this reason, the formation of a sulfonamide is a classic method to convert an amine into a crystalline derivative which can be identified by its melting point. Many important drugs contain the sulfonamide group.

<span class="mw-page-title-main">3-Dimethylaminoacrolein</span> Chemical compound

3-Dimethylaminoacrolein is an organic compound with the formula Me2NC(H)=CHCHO. It is a pale yellow water-soluble liquid. The compound has a number of useful and unusual properties, e.g. it "causes a reversal of the hypnotic effect of morphine in mice" and has a "stimulating effect in humans".

<span class="mw-page-title-main">Vilsmeier reagent</span> Chemical compound

The Vilsmeier reagent is an organic compound with the formula [(CH3)2NCHCl]Cl. It is a salt consisting of the N,N-dimethyliminium cation ([(CH3)2N=CHCl]+) and chloride anion. Depending on the particular reaction, the anion can vary. In typical POCl3-based reactions, the anion is PO2Cl2−. The iminium cation [(CH3)2N=CHCl]+ is the reactive component of interest. This iminium species is a derivative of the imidoyl chloride CH3N=CHCl. Analogues of this particular reagent are generated when tertiary amides other than DMF are treated with POCl3.

References

  1. 1 2 3 4 5 6 7 8 9 10 Ulrich, H. The Chemistry of Imidoyl Halides; Plenum Press: New York, 1968; pp. 55–112.
  2. ↑ Arthur C. Hontz, E. C. Wagner (1951). "N,N'-Diphenylbenzamidine". Organic Syntheses. 31: 48. doi:10.15227/orgsyn.031.0048.
  3. ↑ Petrova, T. D.; Kolesnikova, I. V.; Mamatyuk, V. I.; Vetchinov, V. P.; Platonov, V. E.; Bagryanskaya, I. Yu.; Gatilov, Yu. V. (September 1993). "Reactions ofN-pentafluorophenylcarbonimidoyl dichloride with aromatic hydrocarbons in the presence of aluminum chloride". Russian Chemical Bulletin. 42 (9): 1540–1546. doi:10.1007/BF00699191. ISSN   1066-5285. S2CID   96774593.
  4. ↑ Vilsmeier, Anton; Haack, Albrecht (1927). "Über die Einwirkung von Halogenphosphor auf Alkyl-formanilide. Eine neue Methode zur Darstellung sekundärer und tertiärer p-Alkylamino-benzaldehyde" [On the reaction of phosphorus halides with alkyl formanilides. A new method for the preparation of secondary and tertiary p-alkylaminobenzaldehydes]. Berichte der Deutschen Chemischen Gesellschaft zu Berlin. 60: 119–122. doi:10.1002/cber.19270600118.
  5. ↑ Meth-Cohn, O.; Stanforth, S. P. (1991). "The Vilsmeier–Haack Reaction (Review)". Compr. Org. Synth. 2: 777–794. doi:10.1016/B978-0-08-052349-1.00049-4.
  6. ↑ Campaigne, E.; Archer, W. L. "Formylation of dimethylaniline". Organic Syntheses . 33: 27. doi:10.15227/orgsyn.033.0027.; Collective Volume, vol. 4, p. 331
  7. ↑ Katritzky, A. R.; Stevens, C. V.; Zhang, G.-F.; Jiang, J.; Kimpe, N. D. Heterocycles 1995, 40, 231.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.