Impedance (accelerator physics)

For other uses, see Impedance (disambiguation).

In accelerator physics, impedance is a quantity that characterizes the self interaction of a charged particle beam, mediated by the beam environment, such as the vacuum chamber, RF cavities, and other elements encountered along the accelerator or storage ring.

Definition in terms of wakefunction

The impedance is defined as the Fourier transform of the Wakefunction. ^[1]

${\displaystyle Z_{0}^{||}(\omega )=\int _{-\infty }^{\infty }{\frac {dz}{c}}e^{-i\omega z/c}W_{0}^{'}(z)}$

From this expression and the fact that the wake function is real, one can derive the property:

${\displaystyle Z^{*||}(\omega )=Z^{||}(-\omega )}$

Important sources of impedance

The impedance is defined at all positions along the beam trajectory. The beam travels through a vacuum chamber. Substantial impedance is generated in transitions, where the shape of the beam pipe changes. The RF cavities are another important source.

Impedance models

In the absence of detailed geometric modeling, one can use various models to represent different aspects of the accelerator beam pipe structure.

One such model is the

Broadband resonator

For the longitudinal case, one has

${\displaystyle Z_{||}(\omega )=R_{s}{\frac {1-iQ({\frac {\omega _{r}}{\omega }}-{\frac {\omega }{\omega _{r}}})}{1+Q^{2}\left({\frac {\omega _{r}}{\omega }}-{\frac {\omega }{\omega _{r}}}\right)^{2}}}}$

with ${\displaystyle R_{s}}$ the shunt impedance, ${\displaystyle Q}$, the quality factor, and ${\displaystyle \omega _{r}}$ the resonant frequency.

Resistive Wall

Given a circular beam piper of radius ${\displaystyle b}$, and conductivity ${\displaystyle \sigma }$, the impedance is given by ^[2]

${\displaystyle Z(\omega )={\frac {1-i}{cb}}{\sqrt {\frac {\omega }{2\pi \sigma }}}}$

The corresponding longitudinal wakefield is approximately given by ^[3]

${\displaystyle W(s)={\frac {q}{2\pi b}}{\sqrt {\frac {c}{\sigma }}}{\frac {1}{s^{3/2}}}}$

The transverse wake-function from the resistive wall is given by

${\displaystyle W(s)\approx {\frac {1}{s^{1/2}}}}$

Effect of Impedance on beam

The impedance acts back on the beam and can cause a variety of effects, often considered deleterious for accelerator functioning. In general, impedance effects are classified under the category of "collective effects" due to the fact that the whole beam must be considered together, and not just a single particle. The whole beam may, however, cause particular changes in the dynamics of individual particles such as tune shifts and coupling. Whole beam changes include emittance growth and instabilities that can lead to beam loss.

See also

https://impedance.web.cern.ch/impedance/ Archived 2018-07-04 at the Wayback Machine

References

1. A. Chao, Physics of Collective Beam Instabilities in High Energy Accelerators, Wiley Publishers, 1993. Available here.
2. http://www-spires.slac.stanford.edu/cgi-wrap/getdoc/slac-pub-11052.pdf%5B%5D
3. "The Short‐Range Resistive Wall Wakefields".