This article may require cleanup to meet Wikipedia's quality standards. The specific problem is: Most of the article (in terms of paragraph) is bunched up together. Needs to be broken down into separate paragraphs.(February 2022) |
Iver Johnson AMAC 1500/5100 | |
---|---|
Type | Anti-material rifle Sniper rifle |
Place of origin | United States |
Production history | |
Designed | 1981–1982 |
Manufacturer | Iver Johnson Arms |
Specifications | |
Length | 51.5 in (131 cm) |
Barrel length | 29 in (73.7 cm) |
Cartridge | .50 BMG |
Action | Manually-operated, rotating bolt |
The Iver Johnson AMAC-1500/5100 (aka RAP Model 500 or aka RAI 500 or, depending on source, 'AMAC-1500' or 'AMAC-5100') is a 36 lb manually-operated single-shot sniper rifle/anti-material rifle. The 29" barrel with a massive 7" two-stage muzzle brake on its end (barrel plus muzzle brake OAL of 36") has a 1 in 14" twist rifling rate, an adjustable crisp trigger pull between 3 lbs - 8 lbs, an adjustable stock length of pull between 13.75" to 15.5," and a stock comb adjustable to +1.5" for operator tuning. The rifle featured a removable "shell holder" rotating bolt with three lugs. For each shot, the removable bolt was rotated and removed from the receiver, then a cartridge was inserted into a half-circular retaining ridge breech bolt face, and then bolt with cartridge were inserted back into receiver and locked closed prior to firing pin cocking and firing. As such, there is no 'safety' once the bolt is engaged with a live round other than counter-rotating the bolt from the locked position. The rifle does not have any integral open sights as only telescopic sights were intended to be used. The integral receiver dove-tail rail with cross-key is set up for a scope mount with fixed ring spacing and 60 min of angle elevation. The rifle was not designed to be fired offhand, and thus had no forearm; instead, each rifle was issued with integral stout folding bipod attached to the receiver that allowed harmonic tuning adjustment in the bipod tube. For carry, rifle was easily disassembled into several major parts. There are several variants that also have larger calibers for this same design. [1]
The Iver Johnson AMAC-1500/5100 is a derivative of the RAP Model 500, which was originally designed by a team led by Jerry Haskins of Research Armaments Prototypes (RAP, or RAI [incorporated]) (Jacksonville, Arkansas) as the Model 500 in 1981 at the request of US Armed Forces (SOCOM not created until April 16, 1987). Jerry Haskins formerly worked with Doug Champlin of Champlin Firearms but left to form his own company in 1971 (name confusion lists D. Haskins as the creator which was a misnomer of Champlin's first initial and Haskins last name). [2] Both weapons are similar; the main differences are the barrel shape, the muzzle brake, and the bipod. [3] Subsequently, the design was purchased by Daisy Weapon Systems (Rogers, Arkansas) who sold the AMAC 1500/5100 manufacturing rights to Iver Johnson Arms. Daisy continued development of the larger caliber M600 and M650 variants eventually selling off these designs to Redick Arms Development (R.A.D.) in 1990. [1] As a note, Iver Johnson's Arms & Cycle Works is a company that originally started in 1891 (Fitchburg, Massachusetts) [4] [ circular reference ] and bears no relation, besides the namesake, to the Iver Johnson Arms of this instance, which was purchased as a name right in 1973 by Louis Imperato, of Middlesex, New Jersey, from the original Iver Johnson company (future creator and owner of Henry Repeating Arms created in 1998, Brooklyn New York). [5] Louis Imperato moved Iver Johnson from its long time original Fitchburg, Massachusetts location to Middlesex, New Jersey in 1977 (Ibid.). After restructuring, Louis Imperato then sold the Iver Johnson brand to a group of eight investors in Jacksonville, Arkansas headed by former business partner Philip Lynn Lloyd in 1982. Lloyd and his investors acquired the Iver Johnson branding from Louis Imperato for an amount to be paid over time with Iver Johnson operations moving to 2202 Redmond Road, Jacksonville, Arkansas in 1983. Rifles were constructed in small numbers (hundreds) and implemented by the US Armed Forces that same year in 1983 for deployment in Beirut, Panama, Grenada, and later Serbia/Bosnia.
Initial military delivery for 125 rifles was not sufficient to keep Iver Johnson operational and Phillip Lynn Lloyd and investors looked to other means of business to pay former owner, Louis Imperato, his due for the Iver Johnson branding. One of several events that caused Iver Johnson to file for bankruptcy in October 1986 was an import deal involving 43,500 Australian Enfield rifles that had arrived seriously damaged to the chagrin of Phillip Lynn Lloyd and investors. This situation was one of the final straws that forced the Iver Johnson company, under Lloyd and investors, to file for Chapter 11 bankruptcy protection in October 1986 in Federal Court (Little Rock, Arkansas). While operations continued at Iver Johnson's Arms at their Jacksonville, Arkansas location during their Chapter 11 Bankruptcy, the money owed Louis Imperato by Phillip Lynn Lloyd and others led to the return of the company to Louis Imperato under controversial conditions. At the completion of the bankruptcy proceedings, Iver Johnson company equipment was then set by the court to be sold at auction to satisfy creditor claims, the biggest creditor being Louis Imperato, himself. The historical controversy centers on, Iver Johnson's previous owner Louis Imperato, then re-purchasing his former company's assets, set for auction sale from the bankruptcy court, for $1.2 million, as he was the first creditor to be satisfied. Included in this bankruptcy court transaction were all the damaged Australian Enfield parts (the ones Phillip Lynn Lloyd and investors had bought prior) when Louis Imperato re-acquired Iver Johnson, its branding, and equipment. This action led to a souring between him and his former business partner, Phillip Lynn Lloyd, and investors as it gave Louis Imperato the right also to collect the remaining balance of the court's determined final company's valuation which Lloyd and investors had never been able to pay in full since acquisition in 1982, four years prior. On February 2, 1987, Louis Imperato created and incorporated Australian Military Surplus Enfield Enterprises in Jacksonville, Arkansas which listed himself as the President, Vice-President, Secretary, and Treasurer with Glenn Barber acting as the registered agent for Louis Imperato's court re-acquired Iver Johnson company in Jacksonville, Arkansas. On company internal documents Louis Imperato identified AMAC as "American Military Arms Corporation" with Iver Johnson Arms being a division of AMAC. The name "American Military Arms Corporation" was not incorporated in Arkansas until September 11, 1989 when it was incorporated by another investor, Neal Paul Fisk (Mountain Home, Arkansas) effectively making Iver Johnson a division of AMAC, Inc. [6] Louis Imperato managed Iver Johnson's Arms in Jacksonville, Arkansas from his office in Brooklyn, New York. However, Louis Imperato would have Iver Johnson declare bankruptcy again, not more than a year later, in 1990, at first as a Chapter 11 (intending to resume business), and then refile to a Chapter 7 (unable to restructure).
As part of the final asset sell-off in bankruptcy court, Numrich Gun Parts [7] acquired all of the M1 and Enfield parts. [6] Redick Arms Development (aka incorrectly referenced as 'Redrick'; incorporated 1990, later sold in 1999 to Aurora Tactical, LLC [Springdale Arkansas]) by single owner Ron Witherspoon (Rogers, Arkansas, same as Daisy Weapon Systems), [8] acquired some of the unsold AMAC 5100s as did Ramo Defense (incorporated 1977; defunct www.ramo.com website) located in Nashville, Tennessee. [8] Later in 2003, other remaining unsold AMAC 5100 rifles were acquired by single owner of Ultimate Accuracy Arms, Darrell Reynolds (incorporated in 2003, Lonoke, Arkansas). [9] Iver Johnson Arms branding, trademark, and other rights were acquired from the bankruptcy court by a Rockledge, Florida based company that began using the Iver Johnson name and Owl company logo in 2006. [10] Their website plainly states that, “We do not have any parts, guns, or info related to the old Iver Johnson name (Ibid). Mr. Louis Imperato passed away in 2007 and his son, Anthony, moved the Henry Repeating Arms company to Bayonne, New Jersey in 2008. [11]
In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.
A semi-automatic rifle is an autoloading rifle that fires a single cartridge with each pull of the trigger, and uses part of the fired cartridge's energy to eject the case and load another cartridge into the chamber. In contrast, a bolt-action rifle requires the user to cycle the bolt manually before they can fire a second time, and a fully automatic rifle fires continuously until the trigger is released.
Bolt-action is a type of manual firearm action that is operated by directly manipulating the bolt via a bolt handle, which is most commonly placed on the right-hand side of the firearm.
In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.
The Lee–Enfield or Enfield is a bolt-action, magazine-fed repeating rifle that served as the main firearm of the military forces of the British Empire and Commonwealth during the first half of the 20th century, and was the British Army's standard rifle from its official adoption in 1895 until 1957. The WWI versions are often referred to as the "SMLE", which is short for the common "Short, Magazine, Lee–Enfield" variant.
A semi-automatic firearm, also called a self-loading or autoloading firearm, is a repeating firearm whose action mechanism automatically loads a following round of cartridge into the chamber (self-loading) and prepares it for subsequent firing, but requires the shooter to manually actuate the trigger in order to discharge each shot. Typically, this involves the weapon's action utilizing the excess energy released during the preceding shot to unlock and move the bolt, extracting and ejecting the spent cartridge case from the chamber, re-cocking the firing mechanism, and loading a new cartridge into the firing chamber, all without input from the user. To fire again, however, the user must actively release the trigger, allow it to "reset", before pulling the trigger again to fire off the next round. As a result, each trigger pull only discharges a single round from a semi-automatic weapon, as opposed to a fully automatic weapon, which will shoot continuously as long as the ammunition is replete and the trigger is kept depressed.
The Rifle No. 5 Mk I, was a derivative of the British Lee–Enfield No. 4 Mk I, Following experience of jungle fighting in the Pacific War, the British came to "the conclusion that a rifle shorter and lighter than the standard issue, bolt action .303 cal No. 4 rifle was required." However its operational use was in post-war colonial campaigns such as the Malayan emergency, where it gained its common nickname of the "Jungle Carbine."
The Lee–Metford rifle was a bolt-action British army service rifle, combining James Paris Lee's rear-locking bolt system and detachable magazine with an innovative seven groove rifled barrel designed by William Ellis Metford. It replaced the Martini–Henry rifle in 1888, following nine years of development and trials, but remained in service for only a short time until replaced by the similar Lee–Enfield.
The Winchester Repeating Arms Company was a prominent American manufacturer of repeating firearms and ammunition. The firm was established in 1866 by Oliver Winchester and was located in New Haven, Connecticut. The firm went into receivership in 1931 and was bought by the Western Cartridge Company, a forerunner of the Olin Corporation. The Winchester brand name is still owned by the Olin Corporation, which makes ammunition under that name. The Winchester name is also used under license for firearms produced by two subsidiaries of the Herstal Group – FN Herstal of Belgium and the Browning Arms Company of Ogden, Utah.
The M1941 Johnson Light Machine Gun, also known as the Johnson and the Johnny gun, was an American recoil-operated light machine gun designed in the late 1930s by Melvin Johnson. It shared the same operating principle and many parts with the M1941 Johnson rifle and the M1947 Johnson auto carbine.
Henry Repeating Arms is a firearms manufacturing company. As of 2019, Henry Repeating Arms ranked in the top five of U.S. long gun manufacturers, and eighth overall in total firearms production, manufacturing over 300,000 firearms annually.
The FN Special Police Rifle is a bolt-action sniper rifle marketed by FNH USA, a subsidiary of the Belgian company FN Herstal.
The M1917 Enfield, the "American Enfield", formally named "United States Rifle, cal .30, Model of 1917" is an American modification and production of the .303-inch Pattern 1914 Enfield (P14) rifle, which was developed and manufactured during the period 1917–1918. Numerically, it was the main rifle used by the American Expeditionary Forces in Europe during World War I. The Danish Sirius Dog Sled Patrol on Greenland still use the M1917, which performs reliably in Arctic conditions, as their service weapon.
The M1941 Johnson Rifle is an American short-recoil operated semi-automatic rifle designed by Melvin Johnson prior to World War II. Although the M1941 was used in limited numbers by the US Marines during the Second World War, it unsuccessfully competed with the contemporary M1 Garand rifle.
Iver Johnson was an American firearms, bicycle, and motorcycle manufacturer from 1871 to 1993. The company shared the same name as its founder, Norwegian-born Iver Johnson (1841–1895).
The Charlton automatic rifle was a fully automatic conversion of the Lee–Enfield rifle, designed by New Zealander Philip Charlton in 1941 to act as a substitute for the Bren and Lewis gun light machine guns which were in severely short supply at the time.
The Barrett M90 is a bolt-action, bullpup rifle chambered in .50 BMG. It was designed and manufactured by Barrett Firearms Company. In 1995, Barrett stopped production of the M90, and replaced it with the M95.
O. F. Mossberg & Sons is an American firearms manufacturer, specializing in shotguns, rifles, scopes, and pistol accessories.
The Haskins Rifle, also known as the RAI 300(Research Armament Model 300) or Haskins M500 rifle was a bolt-action weapon designed by Jerry Haskins between 1981 and 1982 for snipers in the US Military. Unlike most military sniper rifles, the Haskins was purpose-built for the military, not reworked from an existing civilian firearm - another such sniper rifle was the Soviet SVD.
The Howa 1500 or Howa M1500 is a bolt-action rifle produced in Japan by Howa Machinery. Introduced in 1979, it has been used by hunters as a hunting rifle with various cartridge offerings. It is also utilized by military and law enforcement elements as a sniper rifle. It is sold under the name of Howa Model 1500 Rifle for overseas markets.
{{cite web}}
: Missing or empty |title=
(help){{cite web}}
: Missing or empty |title=
(help)This section is empty. You can help by adding to it. (January 2014) |