This article includes a list of general references, but it lacks sufficient corresponding inline citations .(April 2023) |
A sniper rifle is a high-precision, long-range rifle. Requirements include high accuracy, reliability, and mobility, concealment, and optics, for anti-personnel, anti-materiel and surveillance uses by military snipers. The modern sniper rifle is a portable shoulder-fired rifle with either a bolt action or semi-automatic action, fitted with a telescopic sight for extreme accuracy and chambered for a high-ballistic performance centerfire cartridge.
The Whitworth rifle was arguably the first long-range sniper rifle in the world. [1] Designed in 1854 by Sir Joseph Whitworth, a prominent British engineer, it used barrels with hexagonal polygonal rifling, which meant that the projectile did not have to "bite" into the rifling grooves as with conventional rifling. His rifle was far more accurate than the Pattern 1853 Enfield, which had shown weaknesses during the Crimean War. At trials in 1857, which tested the accuracy and range of both weapons, Whitworth's design outperformed the Enfield at a rate of about three to one.[ citation needed ] The Whitworth rifle was able to hit the target at a range of 2,000 yards (around 1,830 meters), whereas the Enfield could only manage it at a distance of 1,400 yards (around 1,280 meters). [2] During the American Civil War, Confederate sharpshooters equipped with Whitworth rifles were tasked to kill Union field artillery crews, and were responsible for killing Major General John Sedgwick—one of the highest-ranking officers killed during the Civil War—at the Battle of Spotsylvania Court House.[ citation needed ]
During the Crimean War, the first optical sights were designed for fitting onto the rifles. Much of this pioneering work was the brainchild of a Colonel D. Davidson, using optical sights produced by Chance Brothers of Birmingham. This allowed a marksman to more accurately observe and target objects at a greater distance than ever before. [3] The telescopic sight, or scope, was originally fixed and could not be adjusted, which therefore limited its range. By the 1870s, the perfection of breech loading magazine rifles led to sniper rifles having "effective accurate" ranges of up to a mile away from their target. [4]
During the Second Boer War, the latest breech-loading rifles with magazines and smokeless powder were used by both sides. The British were equipped with the Lee–Metford rifle, while the Boers had received the latest Mauser Model 1895 rifles from Germany. In the open terrain of South Africa, the marksman was a crucial component in battle. The Lovat Scouts was a British Army unit formed in 1899 that was renowned for the expert marksmanship and stalking skills of its personnel. The men wore ghillie suits for camouflage and were expertly skilled in observation. Hesketh Hesketh-Prichard said of them that "keener men never lived". [5] After the Boer War, the Scouts became the first official sniper unit in the British Army.
It was not until World War I that sniper rifles began to be used more regularly in battle and certain soldiers given specialized training to use such a rifle. In Germany, these trained snipers were given rifles with telescopic sights, which illuminated at night in order to improve their accuracy. [6] German gunsmiths fitted the scope above the barrel for optimal accuracy. [7]
During World War I, the accuracy of the sniper rifle was greatly improved. [8] By the end of World War II, snipers were reported to provide "reasonable accuracy" over 600 m (656 yd) with anything over this range being unpredictable. [9] It was during World War I and II that the word ‘sniper’ began to be used commonly, whereas previously those who were armed with sniper rifles were referred to as sharpshooters or marksmen. [10] These marksmen, wielding sniper rifles such as the Karabiner 98k and Mosin–Nagant Model 1891/30 sniper rifle, had a drastic and demoralizing effect on the battlefield. [11] Soldiers would often remain hidden in foxholes or trenches so as not to expose themselves to the deadly accuracy of a sniper. Some soldiers even began to disregard orders from commanding officers to protect against potential harm, which thus broke down the chain of command on the battlefield. [12] The sniper rifle soon acquired the reputation of being one of the most effective and ruthless weapons of war. [13]
Though sniper rifles had proved to be extremely effective in combat, there was still a great reluctance in many militaries to adopt a trained sniper regiment. [14] To effectively use a sniper rifle, a soldier had to go through particularly rigorous training, and most trainees did not make it past the first week. [15] Sniper training was also so expensive to conduct that, even until as recently as 1970, the reasoning for having trained snipers as a part of an army was deemed questionable. [14] In Britain, sniper rifles were not seen as being an integral part of an army until after the Germans boasted of their success with sniper teams during the early months of World War I. British army advisors supposed that the telescopic sights attached to sniper rifles were too easily damaged and thus not well suited for military use. [9] However, they soon realized that these telescopic sights could be improved and made sturdy enough to withstand a sniper rifle shot. [9]
Sniper rifles have continued to be used consistently throughout the later part of the 20th century in Korea, Vietnam and the Middle East as an integral part of the modern style of guerrilla warfare.
The durability, accuracy and power of sniper rifles circa 2010 are beyond anything in use even ten years prior, and dwarf those of World War II sniper rifles. [16] Modern sniper rifles are very reliable and are able to fire repeatedly without losing accuracy, whereas earlier sniper rifles were more liable to lose accuracy due to wear and tear. [17] Sniper rifles continue to be adapted and improved upon, with the effective range of sniper rifles (c. 2001) exceeding 1,000 m (1,094 yd), making them one of the most accurate and efficient weapons in use. [17]
Modern sniper rifles can be divided into two basic classes: military and law enforcement.[ citation needed ]
Sniper rifles manufactured for military service are often designed for very high durability, range, reliability, sturdiness, serviceability, and repairability under adverse environmental and combat conditions, at the sacrifice of a small degree of accuracy. Military snipers and sharpshooters may also be required to carry their rifles and other equipment for long distances, making it important to minimize weight. Military organizations often operate under strict budget constraints, which influences the type and quality of sniper rifles they purchase.
Sniper rifles built or modified for use in law enforcement are generally required to have the greatest possible accuracy, but do not need to have as long a range.
Law enforcement-specific rifles are usually used in non-combat (often urban) environments, so they do not have the requirement to be as hardy or portable as military versions; they may also be smaller due to the decrease in required range.
Some of the first sniper rifles designed specifically to meet police and other law-enforcement requirements were developed for West German police after the Munich massacre at the 1972 Summer Olympics. Many police services and law enforcement organizations (such as the U.S. Secret Service) now use rifles designed for law enforcement purposes.
The Heckler & Koch PSG1 is one rifle specifically designed to meet these criteria and is often referred to as an ideal example of this type of sniper rifle. The FN Special Police Rifle was built for, and is marketed to, law enforcement rather than military agencies.
The features of a sniper rifle can vary widely depending on the specific tasks it is intended to perform. Features that may distinguish a sniper rifle from other weapons are the presence of a telescopic sight, unusually long overall length, [18] a stock designed for firing from a prone position, and the presence of a bipod and other accessories.
Perhaps the single most important characteristic that sets a sniper rifle apart from other military or police small arms is the mounting of a telescopic sight, which is relatively easy to distinguish from smaller optical aiming devices found on some modern assault rifles and submachine guns (such as reflector sights). The telescopic sights used on sniper rifles differ from other optical sights in that they offer much greater magnification (more than 4× and up to 40×) and have a much larger objective lens (40 to 50 mm in diameter) for a brighter image.
Most telescopic lenses employed in military or police roles also have special reticles to aid with judgment of distance, which is an important factor in accurate shot placement due to the bullet's trajectory.
The choice between bolt-action and semi-automatic, usually recoil operation or gas operation for the latter, is usually determined by specific requirements of the sniper's role in a particular organization, with each design having advantages and disadvantages. For a given cartridge, a bolt-action rifle is cheaper to build and maintain, more reliable, and lighter, due to fewer moving parts in the mechanism. In addition, the absence of uncontrolled automatic cartridge case ejection helps avoid revealing the shooter's position. Semi-automatic weapons can serve both as a battle rifle and sniper rifle, and allow for a greater rate (and hence volume) of fire. As such rifles may be modified service rifles, an additional benefit can be commonality of operation with the issued infantry rifle. A bolt action is most commonly used in both military and police roles due to its higher accuracy and ease of maintenance. Special forces operators tend to prefer semi-automatic rifles over bolt-action rifles for certain applications such as detonating unexploded ordnance from a safe distance and penetrating reinforced structures that enemy combatants are using as cover.
A designated marksman rifle (DMR) is less specialized than a typical military sniper rifle, often only intended to extend the range of a group of soldiers. Therefore, when a semi-automatic action is used, it is due to an overlap with the roles of standard-issue weapons. There may also be additional logistical advantages if the DMR uses the same ammunition as the more common standard-issue weapons. These rifles enable a higher volume of fire, but sacrifice some long-range accuracy. They are frequently built from existing selective fire battle rifles or assault rifles, often simply by adding a telescopic sight and adjustable stock.
A police semi-automatic sniper rifle may be used in situations that require a single sniper to engage multiple targets in quick succession; military semi-automatics, such as the M110 SASS, are used in similar "target-rich" environments.
In a military setting, logistical concerns are the primary determinant of the cartridge used, so sniper rifles are usually limited to rifle cartridges commonly used by the military force employing the rifle and match grade ammunition. Since large national militaries generally change slowly, military rifle ammunition is frequently battle-tested and well-studied by ammunition and firearms experts. Consequently, police forces tend to follow military practices in choosing a sniper rifle cartridge instead of trying to break new ground with less-perfected (but possibly better) ammunition.
Before the introduction of the standard 7.62×51mm NATO (.308 Winchester) cartridge in the 1950s, standard military cartridges were the .30-06 Springfield (7.62×63mm) (United States), .303 British (7.7×56mmR) (United Kingdom), and 7.92×57 mm Mauser (Germany). The .30-06 Springfield continued in service with U.S. Marine Corps snipers during the Vietnam War in the 1970s, well after general adoption of the 7.62×51mm. At the present time,[ when? ] in both the Western world and within NATO, the 7.62×51mm is currently the primary cartridge of choice for military and police sniper rifles.
Worldwide, the trend is similar. The preferred sniper cartridge in Russia is another .30 caliber military cartridge, the 7.62×54mmR, which has slightly superior performance to the 7.62×51mm, although the rimmed design limits reliability compared to the latter cartridge. This cartridge was introduced in 1891, and both Russian sniper rifles of the modern era, the Mosin–Nagant and the SVD, are chambered for it.
Certain commercial cartridges designed with only performance in mind, without the logistical constraints of most armies, have also gained popularity in the 1990s. These include the 7mm Remington Magnum (7.2×64mm), .300 Winchester Magnum (7.62×67mm), and the .338 Lapua Magnum (8.6×70mm). These cartridges offer better ballistic performance and greater effective range than the 7.62×51mm. Though they are not as powerful as .50 caliber cartridges, rifles chambered for these cartridges are not as heavy as those chambered for .50 caliber ammunition, and are significantly more powerful than rifles chambered for 7.62×51mm. [19]
Snipers may also employ anti-materiel rifles in sniping roles against targets such as vehicles, equipment and structures, or for the long-range destruction of explosive devices; these rifles may also be used against personnel.
Anti-materiel rifles tend to be semi-automatic and of a larger caliber than other rifles, using cartridges such as the .50 BMG (12.7×99mm), 12.7×108mm, 14.5×114mm, and 20mm. These large cartridges are required to be able to fire projectiles containing payloads such as explosives, armor-piercing cores, incendiaries or combinations of these, such as the Raufoss Mk 211 projectile. Due to the considerable size and weight of anti-materiel rifles, two- or three-man sniper teams become necessary.
Barrels are normally of precise manufacture and of a heavier cross section than more traditional barrels, in order to reduce the change in impact points between a first shot from a cold barrel and a follow-up shot from a warm barrel. Unlike many battle and assault rifles, the bores are usually not chromed to avoid inaccuracy due to an uneven treatment.
When installed, barrels are often free-floating—installed so that the barrel contacts the rest of the rifle only at the receiver. A free-floating barrel avoids contact with the fore-end of the stock by the barrel itself, sling, bipod, or the sniper's hands that can interfere with barrel harmonics. The end of the barrel is usually crowned or machined to form a rebated area around the muzzle proper to avoid asymmetry or damage, and consequent inaccuracy.
External longitudinal fluting that contributes to heat dissipation by increasing the surface area, while simultaneously decreasing the weight of the barrel, is sometimes used on sniper rifle barrels.
Sniper-rifle barrels may also utilize a threaded muzzle or combination device (muzzle brake or flash suppressor and attachment mount) to allow the fitting of a suppressor. These suppressors often have a means of adjusting the point of impact while fitted.
Military sniper rifles tend to have barrel lengths of 610 mm (24 in) or longer to allow the cartridge propellant to fully burn, reducing the amount of revealing muzzle flash and increasing muzzle velocity. Police sniper rifles may use shorter barrels to improve handling characteristics. The shorter barrels' muzzle velocity loss is unimportant at closer ranges; the impact velocity of the bullet is more than sufficient.
The most common special feature of a sniper rifle stock is the adjustable cheek piece, where the shooter's cheek meets the rear of the stock. For most rifles equipped with a telescopic sight, this area is raised slightly because the telescope is positioned higher than iron sights, and can sometimes be adjusted up or down to suit the individual shooter. To further aid this individual fitting, the stock can sometimes also be adjusted for length, often by varying the number of inserts at the rear of the stock where it meets the shooter's shoulder. If the stock is manufactured from wood, environmental conditions or operational use may warp the wood, causing slight alignment or barrel harmonics changes over time and altering the point of impact. Stocks manufactured from polymers and metal alloys are less susceptible to point of impact shifting from environmental conditions. Sniper stocks are typically designed to avoid making contact with the barrel of the weapon to minimize the effects of environmental inconstancies. Modern sniper rifle stocks tend to be designed around a rigid chassis, offer user adjustability to allow shooters of various sizes and shapes to tailor the stock to their personal preferences, and modular attachment points to accommodate low-light and daylight aiming optics, laser designators, and other accessories without the need for custom-made mounting interface kits.
An adjustable sling is often fitted on the rifle, used by the sniper to achieve better stability when standing, kneeling, or sitting. The sniper uses the sling to "lock in" by wrapping their non-firing arm into the sling, keeping that arm still.
Non-static weapon mounts, such as bipods, monopods, and shooting sticks, are also regularly used to aid and improve stability and reduce operator fatigue.
Shooting bags are also commonly used to help stabilize the rifle or to provide an adjustable base.
A military-issue battle rifle or assault rifle is usually capable of between 3–6 minute of angle (0.9–1.7 milliradian) accuracy. [20] A standard-issue military sniper rifle is typically capable of 1–3 MOA (0.3–0.9 mrad) accuracy, with a police sniper rifle capable of 0.25–1.5 MOA (0.1–0.4 mrad) accuracy. For comparison, a competition target or benchrest rifle may be capable of accuracy up to 0.15–0.3 MOA (0.04–0.09 mrad).
A 1 MOA (0.28 mrad) average extreme spread (the center-to-center distance between the two most distant bullet holes) for a 5-shot group translates into a 69% probability that the bullet's point of impact will be in a target circle with a diameter of 23.3 cm (9.2 in) at 800 m (875 yd). [21] This average extreme spread for a 5-shot group and the accompanying hit probability are considered sufficient for effectively hitting a human at an 800-meter distance.
In 1982, a U.S. Army draft requirement for a Sniper Weapon System was: "The System will: (6) Have an accuracy of no more than 0.75 MOA (0.2 mrad) for a 5-shot group at 1,500 meters when fired from a supported, non-benchrest position". [22] The M24 Sniper Weapon System adopted in 1988 has a stated maximum effective range of 800 meters and a maximum allowed average mean radius (AMR) of 1.9 inches at 300 yards from a machine rest, which corresponds to a 0.6 MOA (0.17 mrad) extreme spread for a 5-shot group when using 7.62×51mm M118 Special Ball cartridges. [21] [23] [24]
A 2008 United States military market survey for a Precision Sniper Rifle (PSR) called for 1 MOA (0.3 mrad) extreme vertical spread for all shots in a 5-round group fired at targets at 300, 600, 900, 1,200 and 1,500 meters. [25] [26] In 2009, a United States Special Operations Command market survey called for a 1 MOA (0.28 mrad) extreme vertical spread for all shots in a 10-round group fired at targets at 300, 600, 900, 1,200, and 1,500 meters. [27] [28] The 2009 Precision Sniper Rifle requirements state that the PSR, when fired without a suppressor, shall provide a confidence factor of 80% that the weapon and ammunition combination is capable of holding 1 MOA (0.28 mrad) extreme vertical spread, calculated from 150 ten-round groups that were fired unsuppressed. No individual group was to exceed 1.5 MOA (0.42 mrad) extreme vertical spread. All accuracy was taken at the 1,500 meter point. [29] [30]
In 2008, the US military adopted the M110 Semi-Automatic Sniper System, which has a maximum allowed extreme spread of 1.8 MOA (0.5 mrad) for a 5-shot group on 300 feet, using M118LR ammunition or equivalent. [21] [23] [31] In 2010, the maximum bullet dispersion requirement for the M24 .300 Winchester Magnum corresponded [21] [23] to 1.4 MOA (0.39 mrad) extreme spread for 5 shot group on 100 meters. [32] In 2011, the US military adapted the .300 Winchester Magnum M2010 Enhanced Sniper Rifle, which had to meet an accuracy requirement to fire ≤ 1 MOA/0.28 mrad (less than a 2-inch shot group at 200 yards) before being released for fielding. [33]
Although accuracy standards for police rifles do not widely exist, rifles are frequently seen with accuracy levels from 0.5 to 1.5 MOA (0.2–0.5 mrad). [34] For typical policing situations, an extreme spread accuracy level no better than 1 MOA (0.3 mrad) is usually all that is required, as police typically employ their rifles at shorter ranges. [35] [36] At 100 m (109 yd) or less, a rifle with a relatively low accuracy of only 1 MOA (0.3 mrad) should be able to repeatedly hit a 3 cm (1.2 inch) target. A 3 cm diameter target is smaller than the brain stem, which is targeted by police snipers for its quick killing effect. [37]
Cartridge | Maximum effective range (m) [38] |
---|---|
5.45×39mm | 600–800 |
5.56×45mm NATO | 600–800 |
7.62×51mm NATO | 800–1,000 |
7.62×54mmR | 800–1,000 |
.300 Winchester Magnum | 900–1,200 |
.338 Lapua Magnum | 1,200–1,500 |
12.7×99mm NATO | 1,500–2,000 |
12.7×108mm | 1,500–2,000 |
14.5×114mm | 1,800–2,300 |
Unlike police sniper rifles, military sniper rifles tend to be employed at the greatest possible distances, so that range advantages, like an increased difficulty to spot and engage the sniper, can be exploited.
The most popular military sniper rifles (in terms of numbers in service) are chambered for 7.62 mm (0.30 inch) caliber ammunition, such as 7.62×51mm and 7.62×54mm R. Since sniper rifles of this class must compete with several other types of military weapons with similar range, snipers invariably must employ skilled fieldcraft to conceal their position.[ citation needed ]
The recent trend in specialized military sniper rifles is towards larger calibers that offer relatively favorable hit probabilities at greater range with anti-personnel cartridges, such as .300 Winchester Magnum and .338 Lapua Magnum, and anti-materiel cartridges, such as 12.7×99mm, 12.7×108mm, and 14.5×114mm. This allows snipers to take fewer risks and spend less time finding concealment when facing enemies that are not equipped with similar weapons.
Maximum range claims made by military organizations and materiel manufacturers regarding sniper weapon systems are not based on consistent or strictly scientific criteria. The problem is that the bullet only interacts after a relatively long flight path with the target (which can also be a materiel target for a sniper bullet). This implies that variables such as the minimal required hit probability, local atmospheric conditions, properties and velocity of the employed bullet (parts), properties of the target, and the desired terminal effect are major relevant factors that determine the maximum effective range of the employed system.
The FBI, a national-level policing organization, has recently specified an accuracy level of 0.5 MOA for 5 shots at 100 yd for sniper rifles issued to their SWAT teams
Minimum documented range is 5 yards, maximum documented range is 187 yards: Police Sniper Utilization Survey, American Sniper Association, 2006, full report available to military and law enforcement agencies only.
Some information publicly available from The Ultimate Sniper: an Advanced Training Manual for Military and Police Snipers, Major John Plaster, 1993.
The SVD, GRAU index 6V1, is a semi-automatic designated marksman rifle/sniper rifle chambered in the 7.62×54mmR cartridge, developed in the Soviet Union.
The M24 Sniper Weapon System (SWS) or M24 is the military and police version of the Remington Model 700 rifle, M24 being the model name assigned by the United States Army after adoption as their standard sniper rifle in 1988. The M24 is referred to as a "weapon system" because it consists of not only a rifle, but also a detachable telescopic sight and other accessories.
The Accuracy International AWM is a bolt-action sniper rifle manufactured by Accuracy International designed for magnum rifle cartridges. The Accuracy International AWM is also unofficially known as the AWSM, which typically denotes AWM rifles chambered in .338 Lapua Magnum.
The Accuracy International Arctic Warfare rifle is a bolt-action sniper rifle designed and manufactured by the British company Accuracy International. It has proved popular as a civilian, police, and military rifle since its introduction in the 1980s. The rifles have features that improve performance in extremely cold conditions without impairing operation in less extreme conditions.
The L42A1 is a bolt-action sniper rifle chambered for the 7.62×51mm NATO cartridge. Used in the past by the British Army, Royal Marines and Royal Air Force RAF Regiment, the L42A1 entered service in 1970. It was replaced by the Accuracy International AW in 1985.
The PGM 338, also known as the PGM .338 LM or PGM Mini-Hecate .338, is French sniper rifle from the early 1990s. It uses the .338 Lapua Magnum (8.6×70mm) cartridge, which remains supersonic up to a range of 1200–1500 m depending on the exact ammunition type and environmental conditions.
The Bor is a Polish bolt-action 7.62×51mm NATO and .338 Lapua Magnum caliber sniper rifle. The weapon received the code name Alex during development, after the name of the lead designer Aleksander Leżucha, creator of the 12.7×99mm NATO Wilk anti-materiel rifle. After the development phase, the rifle received the military designation 'Bor'.
The Karabiner Modell 1931 is a magazine-fed, straight-pull bolt-action rifle. It was the standard-issue rifle of the Swiss armed forces from 1933 until 1958 though examples remained in service into the 1970s. It has a 6-round removable magazine, and is chambered for the 7.5×55mm Swiss Gewehrpatrone 1911 or GP 11, a cartridge with ballistic qualities similar to the 7.62×51mm NATO/.308 Winchester cartridge. Each rifle included a 6-round detachable box magazine with matching stamped serial number. A stripper clip can be used to load the magazine from the top of the receiver.
The SSG 69 is a bolt-action sniper rifle produced by Steyr Mannlicher that serves as the standard sniper rifle for the Austrian Army.
The Gepárd anti-materiel rifles are a family of Hungarian weapons manufactured by Sero International Kft. designed to destroy unarmored and lightly armored targets. These long-range large-caliber rifles have high accuracy and muzzle velocity. In 1987, the Hungarian People's Army sought to obtain a compact, mobile weapon that could damage lightly armored targets. The project, led by Ferenc Földi, culminated in the creation of the Gepárds.
The Sako TRG is a bolt-action sniper rifle line designed and manufactured by Finnish firearms manufacturer SAKO of Riihimäki. It is the successor to the SAKO TR-6 target rifle, and thus the letter G within the rifle's name is meant to represent number 7.
The FR F1 is a French sniper rifle manufactured by the Manufacture d'armes de Saint-Étienne (MAS); one of several government-owned arms factories in France. The FR F1 was France's first purpose-built precision rifle for sharpshooters. Introduced in 1966, the rifle was in use with the French Armed Forces until 1989 when it was replaced by the FR F2.
The APR is a bolt-action sniper rifle designed by the Thun-based Brügger & Thomet in 2003 as an evolution of the French PGM Précision.
The C14 Timberwolf MRSWS is a bolt-action sniper rifle built by the Canadian arms company PGW Defence Technologies Inc. In 2005 they won the contract to supply the Canadian Forces Land Command with the C14 Timberwolf MRSWS for $4.5 million.
The Parker-Hale Model 82 (M82) is the military version of the Parker-Hale 1200TX target rifle; it was accepted for service by several nations for both military and police use. In appearance and design terms the Model 82 is an entirely conventional sniping weapon. It uses a manual bolt action the same as the classic Mauser 98 rifle, allied to a heavy free-floating barrel chambered for the 7.62×51mm NATO round. The barrel weighs 1.98 kg and is manufactured from chrome molybdenum steel. The Model 82 has an integral four-round magazine and an entirely self-contained trigger unit which can be adjusted as required.
The M2010 Enhanced Sniper Rifle (ESR), formerly known as the XM2010 and M24 Reconfigured Sniper Weapon System, is a bolt action sniper rifle developed by PEO Soldier for the United States Army. It is derived from and replaced the M24 Sniper Weapon System, and was designed to give snipers longer range in the mountainous and desert terrain of the War in Afghanistan. After winning a competitive bidding process, Remington was awarded the production contract for up to 3,600 weapons. The Army had anticipated sending the upgraded weapons to deployed snipers in late 2010, but later expected fielding would happen in January 2011. The M2010 fires .300 Winchester Magnum (7.62×67mm) ammunition, which offers about 50 percent more effective range than the M24's 7.62×51mm NATO. This chambering to dimensionally larger cartridges is possible because the M24 was designed to use the "long action" bolt version of the Remington 700 receiver for cartridges up to 3.34 inches (84.84 mm) in overall length.
The Modular Sniper Rifle, or MSR, is a bolt-action sniper rifle developed and produced by Remington Arms for the United States Army. It was introduced in 2009, and was designed to meet specific United States Army and USSOCOM Precision Sniper Rifle requirements. The MSR initially won the PSR competition, and was called the Remington Mk 21 Precision Sniper Rifle in U.S. military service. However, it was then decided that the Mk 21 did not conform to SOCOM requirements at the time in 2018, and the program was re-competed with the Barrett MRAD selected in 2019 as the Mk 22 Advanced Sniper Rifle solution.
The Barrett MRAD is a bolt-action sniper rifle designed by Barrett to meet the requirements of the SOCOM PSR. The MRAD is based on the Barrett 98B and includes a number of modifications and improvements. The Barrett MRAD was named the 2012 Rifle of the Year by Shooting Illustrated magazine.
The Accuracy International AX50 is a .50 BMG anti-materiel rifle manufactured by British firearms company Accuracy International.
The PSR-90 is a Pakistani semi-automatic 7.62×51mm precision rifle designed and manufactured by Pakistan Ordnance Factories. It is used by the Pakistani military's special forces, namely by Army and Navy snipers.
{{cite journal}}
: Cite journal requires |journal=
(help){{cite journal}}
: Cite journal requires |journal=
(help){{cite web}}
: |author1=
has generic name (help)