Military Armament Corporation M10 | |
---|---|
Type | Machine pistol Submachine gun |
Place of origin | United States |
Service history | |
In service | 1970–present |
Used by | See Users |
Wars | |
Production history | |
Designer | Gordon Ingram |
Designed | 1964 |
Manufacturer | Military Armament Corporation |
Unit cost | $120 |
Produced | 1970–1973 [2] |
Specifications | |
Mass | 2.84 kg (6.3 lb) empty without a suppressor |
Length |
|
Barrel length | 146 mm (5.7 in) |
Width |
|
Cartridge |
|
Action | Straight blowback [3] |
Rate of fire |
|
Muzzle velocity |
|
Effective firing range |
|
Maximum firing range | 100 meters (for .45 ACP) |
Feed system |
|
Sights | Iron sights |
The Military Armament Corporation Model 10, officially abbreviated as "M10" or "M-10", [5] and more commonly known as the MAC-10, is a compact, blowback operated machine pistol/submachine gun that was developed by Gordon Ingram in 1964. It is chambered in either .45 ACP or 9mm. A two-stage suppressor by Sionics was designed for the MAC-10, which not only abates the noise created but makes it easier to control on full automatic (although it also makes the gun far less compact and concealable). [6]
Military Armament Corporation never used the "MAC-10" nomenclature in its catalogues or sales literature, but "MAC-10" is frequently used by Title II dealers, gun writers, and collectors.[ citation needed ] For a decade, the semi-automatic pistol version of the weapon was forbidden in the U.S. under the assault weapons ban enacted by Congress in 1994.
The MAC-10 is built predominantly from steel stampings. A notched cocking handle protrudes from the top of the receiver, and turning the handle 90°, locks the bolt, and acts as an indicator the weapon is unable to fire. The MAC-10 has a telescoping bolt, which wraps around the rear face of the barrel. This allows a more compact weapon and balances the weight of the weapon over the pistol grip, where the magazine is located. The MAC-10 fires from an open bolt, and the light weight of the bolt results in a rapid rate of fire. In addition, this design incorporates a built-in feed ramp as part of the trigger guard (a new concept at the time) and, to save on cost, the magazine design was recycled from the M3 Grease Gun. The barrel is threaded to accept a suppressor, which works by reducing the discharge's sound without attempting to reduce the speed of the bullet. The .45 ACP models are well-suited for this, as most .45 loads are naturally subsonic, as opposed to the specialized subsonic loads usually required for suppressed 9mm weapons. At the suggestion of the United States Army, the suppressor also acts as a foregrip to inhibit muzzle rise when fired. Ingram added a small bracket with a small strap beneath the muzzle to aid in controlling recoil during fully automatic fire. The original rate of fire for the MAC-10 in .45 ACP is approximately 1090 rounds per minute.[ citation needed ] That of the 9mm is approximately 1250, and that of the smaller MAC-11 in .380 ACP is 1500 rounds per minute. [7]
Noting the weapon's poor accuracy, in the 1970s, International Association of Police Chiefs weapons researcher David Steele described the MAC series as "fit only for combat in a phone booth". [8]
The primary reason for the original M10 finding recognition was its revolutionary sound suppressor designed by Mitchell WerBell III of Sionics. This suppressor has a two-stage design, with the first stage being larger than the second. This uniquely shaped suppressor gives the MAC-10 a very distinctive look. It is also very quiet, to the point that the bolt can be heard cycling, along with the suppressed report of the weapon's discharge, though only if subsonic rounds are used (standard .45 ACP rounds are subsonic). The suppressor, when used with a Nomex cover, creates a place to hold the firearm with the secondary hand, making it easier to control. During the 1970s, the United States placed restrictions on the export of suppressors, and a number of countries canceled their orders as the effectiveness of the MAC-10's suppressor was one of its main selling points. This was one factor that led to the bankruptcy of Military Armament Corporation, another being the company's failure to recognize the private market.[ clarification needed ] The original Sionics suppressor is 11.44 inches in length, 2.13 inches in overall diameter, and weighs 1.20 pounds. [9]
While the original M10 was available chambered for either .45 ACP or 9mm, the M10 is part of a series of machine pistols, the others being the MAC-11/M-11A1, which is a scaled-down version of the M10 chambered in .380 ACP (9×17mm); and the M-11/9, which is a modified version of the M-11 with a longer receiver chambered in 9×19mm, later made by SWD (Sylvia and Wayne Daniel), Leinad and Vulcan Armament. Law enforcement bureaucracies such as the Minnesota Bureau of Criminal Apprehension (BCA) consider MAC-11 variants such as the Leinad PM-11 to be part of the "MAC-10 class pistol". [10]
In the United States, machine guns are National Firearms Act items. As the Military Armament Corporation was in bankruptcy, a large number of incomplete sheet metal frame flats were given serial numbers and then bought by a new company, RPB Industries. Some of the previously completed guns, which were already stamped with MAC, were then stamped with RPB on the reverse side, making it a "double stamp" gun.[ citation needed ]
RPB Industries made many open-bolt semi-automatic and sub-machine guns before the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) seized roughly 200 open-bolt semi-autos during the drug wars of 1981. The BATFE insisted that all future semi-automatic firearms were to be manufactured with a closed-bolt design as the open-bolt semi-automatics were considered too easy to illegally convert to full automatic operation. [9]
Wayne Daniel, a former RPB machine operator, purchased much of their remaining inventory and formed SWD, designing a new weapon which was more balanced, available either fully or semi-automatic with his new BATFE-approved closed bolt design. [11]
There are several carbine versions of the M-11/9 and Cobray and SWD manufactured a smaller version chambered in .380 ACP as a semiautomatic pistol called the M-12. [12]
Today, while the civilian manufacture, sale and possession of post-1986 select-fire MAC-10 and variants is prohibited, it is still legal to sell templates, tooling and manuals to complete such conversions. These items are typically marketed as being "post-sample" materials for use by Federal Firearm Licensees for manufacturing/distributing select-fire variants of the MAC-10 to law enforcement, military and overseas customers. [13]
The semi-automatic civilian pistol version of the MAC-10, which operates differently from its military counterpart, fell under the 1994 Assault Weapons Ban. The ban – which expired in 2004 – enacted various requirements that defined an assault weapon. The MAC-10 was named directly in the ban, and it failed three of the requirements:
Additionally, the magazine capacity is 32 rounds. In response, Wayne Daniel redesigned the M-11 by eliminating the threaded barrel and creating a new magazine release that would only allow the firearm to accept a new 10-round magazine, as the 1994 Assault Weapons Ban mandated. The new firearm was called the PM11/9. [15]
The BXP is a 9 mm submachine gun developed in the mid-1980s by the South African company Mechem (currently a division of Denel, formerly under ARMSCOR) and brought into production in 1984. Due to international arms embargoes of Apartheid South Africa, the country was forced to design and manufacture their own weapons. The weapon was intended for use by security forces. The manufacturing rights have changed hands several times, passing from Mechem to Milkor Marketing and later to Truvelo Armoury, the current manufacturer (as of 2009 [update] ).[ citation needed ]
The Cobra carbine is a semi-automatic firearm of Rhodesian origin manufactured during the Rhodesian Bush War Era as a self-defense weapon for farmers and is chambered for the 9×19mm Parabellum round. The layout of this weapon is somewhat based on the Uzi submachine gun. [16]
The Pistola Ametralladora Patria is a close copy of the MAC-10 and features a cooling jacket/barrel extension much like the South African BXP. It was developed by Major Luis Ricardo Dávila, of the Argentine Air Force, and protected by national Patent n° 220494/5/6/7 on 20/08/1980. It uses 9mm rounds for easy transportation and can be operated in either hand. [17] A similar earlier Argentine weapon based on the MAC-10 was also designed in 1977 by manufacturer Domingo Matheu, the Pistola Ametralladora MPA. [17] [18]
The Enarm MSM (Mini Sub Metralhadora or Mini Submachine Gun) was a submachine gun of Brazilian origin based on the Uzi and MAC-10 weapons, made by ENARM. [19] It was chambered in the 9×19mm Parabellum round and also came with a foregrip. Although the weapon performed well in trials, it was discontinued due to the company disbanding due to "internal disruptions". [19]
Section Five Firearms Ltd of Tunbridge Wells, Kent in the UK manufactured a MAC-10 variation in 9×19 Parabellum [20] in the 1970s. They only accept 9×19mm Uzi magazines and are equipped with a classic folding or a special fixed polymer stock.[ citation needed ]
A machine pistol is a handgun that is capable of fully automatic fire, including stockless handgun-style submachine guns.
A submachine gun (SMG) is a magazine-fed automatic carbine designed to fire handgun cartridges. The term "submachine gun" was coined by John T. Thompson, the inventor of the Thompson submachine gun, to describe its design concept as an automatic firearm with notably less firepower than a machine gun. As a machine gun must fire rifle cartridges to be classified as such, submachine guns are not considered machine guns.
The Uzi is a family of Israeli open-bolt, blowback-operated submachine guns and machine pistols first designed by Major Uziel "Uzi" Gal in the late 1940s, shortly after the establishment of the State of Israel. It is one of the first weapons to incorporate a telescoping bolt design, which allows the magazine to be housed in the pistol grip for a shorter weapon.
The .380 ACP, also known as .380 Auto, .380 Automatic, or 9×17mm, is a rimless, straight-walled pistol cartridge that was developed by firearms designer John Moses Browning. The cartridge headspaces on the mouth of the case. It was introduced in 1908 by Colt, for use in its new Colt Model 1903 Pocket Hammerless semi-automatic, and has been a popular self-defense cartridge ever since, seeing wide use in numerous handguns. Other names for .380 ACP include 9mm Browning, 9mm Corto, 9mm Kurz, 9mm Short, and 9mm Browning Court. It should not be confused with .38 ACP. The .380 ACP does not strictly conform to cartridge naming conventions, named after the diameter of the bullet, as the actual bullet diameter of the .380 ACP is .355 inches.
The Military Armament Corporation Model 11, officially abbreviated as "M11" or "M-11", and commonly known as the MAC-11, is a machine pistol/submachine gun developed by American firearm designer Gordon Ingram at the Military Armament Corporation (MAC) during the 1970s in Powder Springs, Georgia, United States. The weapon is a sub-compact version of the Model 10 (MAC-10), and is chambered to fire the smaller .380 ACP round.
The Heckler & Koch UMP is a submachine gun developed and manufactured by Heckler & Koch. Heckler & Koch developed the UMP as a lighter and cheaper successor to the MP5, though both remain in production. The UMP has been adopted for use by various countries including Brazil, Canada, and the United States. Some of the weapons saw limited service in the early years of the Iraqi insurgency, making them one of the more popular submachine guns being deployed by the U.S. military personnel in recent conflicts around the world.
A firearm is said to fire from an open bolt or open breech if, when ready to fire, the bolt and working parts are held to the rear of the receiver, with no round in the chamber. When the trigger is actuated, the bolt travels forward, feeds a cartridge from the magazine or belt into the chamber, and fires that cartridge in the same movement. Like any other self-loading design, the action is cycled by the energy released from the propellant, which sends the bolt back to the rear, compressing the mainspring in readiness for firing the next round. In an open-bolt gun firing semi-automatically, the bolt is caught and held at this point by the sear after each shot; and in automatic open-bolt fire, it's caught and held in this manner whenever the trigger is released. In contrast to this, in closed-bolt guns, the trigger and sear do not affect the movement of the bolt directly.
The Lusa is a compact 9×19mm Parabellum submachine gun developed by INDEP of Portugal in 1983. Its name is derived from Lusitania, which was the Roman name for the Iberian region that covers present day central and southern Portugal and part of Spain. Although it was originally intended for military use, it was well-suited for law enforcement and ended up being marketed to bodyguards, VIP protection and special operations units.
The BXP is a 9×19mm submachine gun developed by Andries Piek, with the fully automatic version finalised in 1978, and the semi-automatic version for civilians coming later in 1984. Due to an international arms embargo against South Africa, South Africans designed and manufactured some weapons as a small firearms industry developed locally. The BXP was one of these locally designed and developed firearms, and is considered the final stage of development of the line of hand machine carbines that started with the LDP in Rhodesia and the Kommando in South Africa. Produced originally by the South African company Milkor (Pty) Ltd, its name 'BXP' stands for 'Blowback eXperimental Parabellum', hinting both at its operating mechanism as well as its caliber. The original automatic version of the BXP was intended for use by South African law enforcement, including the South African Police, the Correctional Services, and the specialised airport security unit based at the then Jan Smuts International Airport, Johannesburg.
The Star Z-84 was a Spanish selective-fire submachine gun originally manufactured by the now defunct Star Bonifacio Echeverria, S.A. The Z-84 is a sturdy, well-designed weapon that never saw high production due to politics. Originally manufactured for use by Combat Swimmers, the Z-84 could be used right out of the water without any need to drain the working parts or magazine, known as over-the-beach or OTB capability.
The FIC Mk. 9 is a sub-machine gun designed by a private venture of Floro International Corporation (FIC) based in Tanay, Rizal Province in the Philippines. The weapon is marketed to local security forces as a low-cost alternative to imported submachine guns and is currently in limited use by the Philippines Marines and the Philippines Navy.
The KRISS Vector is a series of weapons based upon the parent submachine gun design developed by the American company KRISS USA, formerly Transformational Defense Industries (TDI).
The QCW-05 is a suppressed bullpup submachine gun, manufactured and developed by the People's Liberation Army (PLA) 208 Research Institute and Jianshe Industries (Group) Corporation of Chongqing under the China South Industries Group for the People's Liberation Army Ground Force, the People's Liberation Army Special Operations Forces and the People's Armed Police. This weapon is designed for the 5.8×21mm DCV05 sub-sonic round that is also used by the QSW-06 Silenced Pistol.
The SG 540 is a 5.56×45mm NATO assault rifle developed in the early 1970s by Schweizerische Industrie Gesellschaft of Neuhausen, Switzerland as a private venture primarily destined for export markets and as a potential replacement for the 7.5×55mm Swiss SG 510 automatic rifle known as the Stgw 57 in Swiss service.
The FMK-3 is a selective fire blowback-operated submachine gun of Argentinian origin designed by Fabricaciones Militares in 1974. Around 30,000 were produced for the Argentinian military by 1991.
Gemtech is an American manufacturer of silencers (suppressors) for pistols, rifles, submachine guns, and personal defense weapons (PDWs). The company also produces ammunition and various accessories.
The SIG MPX is a gas-operated submachine gun designed and manufactured by SIG Sauer, and is primarily chambered in 9×19mm Parabellum. It is a gas-operated firearm featuring a closed, rotating bolt. These design features, rare in submachine guns, were chosen to enhance the safety of the user and to have a more reliable firearm. It was designed in 2013 and was released to the general public in 2015. It features the SIG Sauer short stroke push-rod gas system to reduce the recoil and improve the reliability of the weapon.
And they found a backpack on the passenger side that had ammunition and "Leinad PM-11 high capacity pistol." The BCA calls it "a MAC-10 class pistol,"
{{cite web}}
: CS1 maint: bot: original URL status unknown (link)Ingram M10 9×19mm submachine gun
{{cite web}}
: CS1 maint: numeric names: authors list (link){{cite web}}
: CS1 maint: bot: original URL status unknown (link){{cite web}}
: CS1 maint: bot: original URL status unknown (link)