This article includes a list of references, but its sources remain unclear because it has insufficient inline citations . (February 2014) (Learn how and when to remove this template message)
|Thompson Submachine Gun, Caliber .45|
M1921 Thompson with forearm grip and drum magazine
|Place of origin||United States|
|In service||1938–1971 (officially, U.S. military) 1921–present (other countries)|
|Used by||See Users|
|Designer||John T. Thompson|
|No. built||Approximately 1.75 million of all variants, including:|
|Variants||See Variants section|
|Cartridge||.45 ACP (11.43×23mm)|
|Action||Blowback, Blish Lock|
|Rate of fire||approx. 830 rpm (M1928), approx. 625 rpm (M1A1), 1500 rpm (M1919)|
|Muzzle velocity||935 ft/s (285 m/s)|
|Effective firing range||164 yds (150 m )|
(M1 and M1A1 models do not accept drum magazines)
The Thompson submachine gun is an American submachine gun invented by John T. Thompson in 1918 which became infamous during the Prohibition era, being a signature weapon of various crime syndicates in the United States. It was a common sight in the media of the time, being used by both law enforcement officers and criminals.The Thompson submachine gun was also known informally as the "Tommy Gun", "Annihilator", "Chicago Typewriter", "Chicago Piano", "Chicago Style", "Chicago Organ Grinder", "Trench Broom", "Trench Sweeper", "The Chopper", and simply "The Thompson".
A submachine gun (SMG) is a magazine-fed, automatic carbine designed to fire pistol cartridges. The term "submachine gun" was coined by John T. Thompson, the inventor of the Thompson submachine gun.
John TaliaferroItalian pronunciation: [ˌtaljaˈfɛrro]Thompson was a United States Army officer best remembered as the inventor of the Thompson submachine gun.
Prohibition in the United States was a nationwide constitutional ban on the production, importation, transportation, and sale of alcoholic beverages from 1920 to 1933.
The Thompson was favored by soldiers, criminals, police, FBI, and civilians alike for its large .45 ACP cartridge, accuracy, and high volume of fully automatic fire. It has since gained popularity among civilian collectors for its historical significance. It has considerable significance in popular culture, especially in works about the Prohibition era and World War II, and is among the best-known firearms in history. The original fully automatic Thompsons are no longer produced, but numerous semi-automatic civilian versions are still being manufactured by Auto-Ordnance. These retain a similar appearance to the original models, but they have various modifications in order to comply with US firearm laws.
The .45 ACP , or .45 Auto (11.43×23mm) is a handgun cartridge designed by John Browning in 1905, for use in his prototype Colt semi-automatic pistol. After successful military trials, it was adopted as the standard chambering for Colt's M1911 pistol, being named .45 ACP.
The National Firearms Act (NFA), 73rd Congress, Sess. 2, ch. 757, 48 Stat. 1236, enacted on June 26, 1934, currently codified as amended as I.R.C. ch. 53, is an Act of Congress in the United States that, in general, imposes a statutory excise tax on the manufacture and transfer of certain firearms and mandates the registration of those firearms. The Act was passed shortly after the repeal of Prohibition. The NFA is also referred to as Title II of the Federal firearms laws. The Gun Control Act of 1968 ("GCA") is Title I.
General John T. Thompson developed the Thompson Submachine Gun. He originally envisioned an "auto rifle" (semi-automatic rifle) to replace the bolt action service rifles then in use, but he came across a patent issued to John Bell Blish in 1915 while searching for a way to allow his weapon to operate safely without the complexity of a recoil or Gas-operated reloading mechanism. Blish's design was based on the adhesion of inclined metal surfaces under pressure.Thompson gained financial backing from Thomas F. Ryan and started the Auto-Ordnance Company in 1916 for the purpose of developing his "auto rifle". It was primarily developed in Cleveland, Ohio, and the principal designers were Theodore H. Eickhoff, Oscar V. Payne, and George E. Goll. By late 1917, the limits of the Blish Principle were discovered; rather than working as a locked breech, it functioned as a friction-delayed blowback action. It was found that the only cartridge currently in service that was suitable for use with the lock was the .45 ACP round. Thompson then envisioned a "one-man, hand-held machine gun" in .45 ACP as a "trench broom" for use in the ongoing trench warfare of World War I. Payne designed the gun and its stick and drum magazines. The project was then titled "Annihilator I", and most of the design issues had been resolved by 1918; however, the war ended two days before prototypes could be shipped to Europe.
The Thompson Autorifle was a semi-automatic rifle that used a Blish Lock to delay the action of the weapon. It was chambered in .30-06, with the 1923 model in 7.62×54mmR Russian rifle rounds.
A semi-automatic rifle is a type of self-loading rifle whose action will automatically cycle a new round after each shot, but needs the shooter to manually reset the hammer/striker before the next shot can be fired, so only a single round will be discharged each time the trigger is depressed.
John Bell Blish was an American inventor known primarily for developing the Blish lock, used in the Thompson submachine gun. Blish licensed the patent for his lock to the Auto-Ordnance Corporation in 1915 in return for company stock.
At an Auto-Ordnance board meeting in 1919 to discuss the marketing of the "Annihilator", with the war now over, the weapon was officially renamed the "Thompson Submachine Gun". While other weapons had been developed shortly prior with similar objectives in mind, the Thompson was the first weapon to be labeled and marketed as a "submachine gun".Thompson intended the weapon as an automatic "trench-broom" to sweep enemy troops from the trenches, filling a role for which the Browning Automatic Rifle (BAR) had been proven ill-suited. This concept had already been developed by German troops using their own Bergmann MP 18, the world's first submachine gun, in concert with Sturmtruppen tactics.
The Browning Automatic Rifle (BAR) is a family of American automatic rifles and machine guns used by the United States and numerous other countries during the 20th century. The primary variant of the BAR series was the M1918, chambered for the .30-06 Springfield rifle cartridge and designed by John Browning in 1917 for the American Expeditionary Forces in Europe as a replacement for the French-made Chauchat and M1909 Benét–Mercié machine guns that US forces had previously been issued.
Theodor Bergmann was a German businessman and industrialist best remembered for the various revolutionary firearms his companies released. Like many entrepreneurs of the era, his activities centered on bicycles, and the nascent automobile. Armament was not Bergmann's primary focus, but the one he was most attracted to, which was the reason most of his pistols were manufactured under license once they were created. He is famous for creating automatic pistols, and their ammunition.
The MP 18 manufactured by Theodor Bergmann Abteilung Waffenbau was the first submachine gun used in combat. It was introduced into service in 1918 by the German Army during World War I as the primary weapon of the Sturmtruppen, assault groups specialized in trench combat. Although MP 18 production ended in the 1920s, its design formed the basis of most submachine guns manufactured between 1920 and 1960.
The Thompson first entered production as the M1921. It was available to civilians, although poor sales resulted from the expense of the weapon; the Thompson gun with one Type XX 20 shot "stick" magazine was priced at $200 in 1921 (equivalent to $2,809in 2018). M1921 Thompsons were sold in small quantities to the United States Postal Inspection Service to protect the mail from a spate of robberies and to the United States Marine Corps. Federal sales were followed by sales to several police departments in the US and minor international sales to various armies and constabulary forces, chiefly in Central and South America. The Marines used their Thompsons in the Banana Wars and in China. It was popular as a point-defense weapon for countering ambush by Nicaraguan guerrillas, and led to the organization of four-man fire teams with as much firepower as a nine-man rifle squad. The major complaints against the Thompson were its weight, inaccuracy at ranges over 50 yards (46 m), and the lack of penetrating power of the .45 ACP pistol cartridge.
The United States Postal Inspection Service (USPIS) is the law enforcement arm of the United States Postal Service. Its jurisdiction is defined as "crimes that may adversely affect or fraudulently use the U.S. Mail, the postal system or postal employees." The mission of the U.S. Postal Inspection Service is to support and protect the U.S. Postal Service, its employees, infrastructure, and customers by enforcing the laws that defend the nation's mail system from illegal or dangerous use.
The Banana Wars were the occupations, police actions, and interventions on the part of the United States in Central America and the Caribbean between the end of the Spanish–American War in 1898 and the inception of the Good Neighbor Policy in 1934. These military interventions were most often carried out by the United States Marine Corps, which developed a manual, The Strategy and Tactics of Small Wars (1921) based on its experiences. On occasion, the Navy provided gunfire support and Army troops were also used.
Some of the first batches of Thompsons were bought in America by agents of the Irish Republic, notably Harry Boland. The first test of a Thompson in Ireland was performed by West Cork Brigade commander Tom Barry in presence of IRA leader Michael Collins.They purchased a total of 653, but US customs authorities in New York seized 495 of them in June 1921. The remainder made their way to the Irish Republican Army by way of Liverpool and were used in the last month of the Irish War of Independence (1919–21). After a truce with the British in July 1921, the IRA imported more Thompsons and used them in the subsequent Irish Civil War (1922–23). They were not found to be very effective in Ireland; the Thompson caused serious casualties in only 32-percent of the actions in which it was used.
The Irish Republic was a revolutionary state that declared its independence from the United Kingdom of Great Britain and Ireland in January 1919. The Republic claimed jurisdiction over the whole island of Ireland, but by 1920 its functional control was limited to only 21 of Ireland's 32 counties, and British state forces maintained presence across much of the north-east, as well as Cork, Dublin and other major towns. The Republic was mostly strongest in rural areas and it was still able to influence the population in urban areas that it did not directly control through influence by the military forces of the new Republic.
Henry James Boland was an Irish republican politician. He was elected at the 1918 general election as the Member of Parliament (MP) for South Roscommon, but as with other Sinn Féin candidates, he did not take seat in the British House of Commons, serving instead as a Teachta Dála (TD) in the First Dáil.
The 3rd Cork Brigade, also known as Third (West) Cork Brigade was a unit of the Irish Republican Army that operated in the western areas of County Cork during the Irish War of Independence.
The Thompson achieved most of its early notoriety in the hands of Prohibition and Great Depression-era gangsters, the lawmen who pursued them, and in Hollywood films about their exploits, most notably in the St Valentine's Day Massacre. The two Thompson guns used in the massacre are still held by the Berrien County Sheriff's Department.The Thompson has been referred to by one researcher as the "gun that made the twenties roar".
In 1926, the Cutts Compensator (a muzzle brake) was offered as an option for the M1921; Thompsons with the compensator were cataloged as No. 21AC at the original price of $200, with the plain M1921 designated No. 21A at a reduced price of $175. equivalent to $3,283in 2018), with $5 per 50-round drum and $3 per 20-round magazine.In 1928, Federal Laboratories took over the distribution of the weapon from Thompson's Auto Ordnance Corporation. The cost at this time was $225 per weapon (
Nationalist China acquired a quantity for use against Japanese land forces, and eventually began producing copies of the Thompson in small quantities for use by its armies and militias. In the 1930s, Taiyuan Arsenal produced copies of the Thompson for Yan Xishan, the warlord of Shanxi province.
The FBI first acquired Thompsons in 1933 following the Kansas City Massacre.
In 1938, the Thompson submachine gun was adopted by the U.S. military, serving during World War II and beyond.
There were two military types of Thompson SMG.
Over 1.5 million military Thompson submachine guns were produced during World War II.
Military users of the M1928A1 had complaints about the "L" fifty-round drum magazine; the British Army officially criticised "their excessive weight, the rattling sound they made" and shipped thousands back to the U.S. in exchange for box magazines. The Thompson had to be cocked, bolt retracted ready to fire, to attach the drum. It attached and detached by sliding sideways, which made magazine changes slow and also created difficulty in clearing a cartridge malfunction ("jam"). Reloading an empty drum with cartridges was an involved process.
In contrast, the "XX" twenty-round box magazine was light and compact, it tended not to rattle, and could be inserted with the bolt safely closed. It was quickly attached and detached and was removed downward, making clearing jams easier. The box tripped the bolt open lock when empty, facilitating magazine changes. An empty box was easily reloaded with loose rounds. However, users complained it was limited in capacity. In the field, some soldiers taped two "XX" magazines together in what would be known as "jungle style" to speed magazine changes.
Two alternatives to the "L" drum and "XX" box magazines were tested December 6, 1941, at Fort Knox: an extended thirty-round box magazine and a forty-round magazine made by welding two 20-round magazines face to face, jungle style. Testers considered both superior to either the "XX" box or "L" drum. The 30-round box was approved as standard in December 1941 to replace the "XX" and "L" magazines.(The concept of welding two box magazines face-to-face was carried over with the UD 42 submachine gun.)
The staff of Savage Arms looked for ways to simplify the M1928A1, producing a prototype in February 1942 which was tested at Aberdeen Proving Ground in March 1942; Army Ordnance approved adoption as the M1 in April 1942. M1s were made by Savage Arms and by Auto-Ordnance. M1s were issued with the 30-round box magazine and would accept the earlier 20-round box, but would not accept the drum magazine.
The Thompson was used in World War II in the hands of Allied troops as a weapon for scouts, non-commissioned officers (corporal, sergeant, and higher), and patrol leaders, as well as commissioned officers, tank crewmen, and soldiers performing raids on German positions. In the European theater, the gun was widely utilized in British and Canadian commando units, as well as in the U.S. Army paratrooper and Ranger battalions, where it was issued more frequently than in line infantry units because of its high rate of fire and its stopping power, which made it very effective in the kinds of close combat these special operations troops were expected to undertake. Military Police were fond of it, as were paratroopers, who "borrowed" Thompsons from members of mortar squads for use on patrols behind enemy lines.The gun was prized by those lucky enough to get one and proved itself in the close street fighting that was encountered frequently during the invasion of France. A Swedish variant of the M1928A1, the Kulsprutepistol m/40 (submachine gun, model 40), served in the Swedish Army between 1940 and 1951. Through Lend-Lease, the Soviet Union also received the Thompson, but due to a shortage of appropriate ammunition, its use was not widespread.
In the Malayan Campaign, the Burma Campaign and the Pacific Theater, Lend-Lease issue Thompsons were used by the British Army, Indian Army, Australian Army infantry and other Commonwealth forces. They used the Thompson extensively in jungle patrols and ambushes, where it was prized for its firepower, though it was criticized for its hefty weight and poor reliability. Difficulties in supply eventually led to its replacement in Australian Army units in 1943 by other submachine guns such as the Owen and Austen. The Thompsons were then given to the Royal Australian Air Force and Royal Australian Navy. New Zealand commando forces initially used Thompsons but switched them for the more reliable, lighter, and more accurate Owen during the Solomon Islands and Guadalcanal campaigns.The U.S. Marines also used the Thompson as a limited-issue weapon, especially during their later island assaults. The Thompson was soon found to have limited effect in heavy jungle cover, where the low-velocity .45 bullet would not penetrate most small-diameter trees or protective armor vests. (In 1923, the Army had rejected the .45 Remington–Thompson, which had twice the energy of the .45 ACP). In the U.S. Army, many Pacific War jungle patrols were originally equipped with Thompsons in the early phases of the New Guinea and Guadalcanal campaigns, but soon began employing the Browning Automatic Rifle in its place as a point defense weapon.
The Army introduced the U.S. M3 and M3A1 submachine guns in 1943 with plans to produce the latter in numbers sufficient to cancel future orders for the Thompson, while gradually withdrawing it from the first-line service. However, due to unforeseen production delays and requests for modifications, the M3/M3A1 never replaced the Thompson, and purchases continued until February 1944. At the end of World War II, the Thompson, with a total wartime production of over 1.5 million, outnumbered the M3/M3A1 submachine guns in service by nearly three to one.
This section needs additional citations for verification . (January 2018) (Learn how and when to remove this template message)
Thompson submachine guns were used by both sides during the 1948 Arab-Israeli war.Following the war, Thompsons were issued to members of Israel’s elite Unit 101, upon the formation of that unit in 1953.
During the Greek Civil War, the Thompson submachine gun was used by both sides. The Hellenic Armed Forces, gendarmerie and police units were equipped with Thompson submachine guns supplied by the British and later in the war by the United States. The opposing Communist fighters of the Democratic Army of Greece were also using Thompson submachine guns, either captured from government forces or inherited from ELAS. ELAS was the strongest of the resistance forces during the period of Greek Resistance against the Germans and Italians and were supplied with arms from both the British and the United States. After the demobilization of ELAS, an unspecified number of arms were not surrendered to the government but kept hidden, and were later used by the Democratic Army of Greece.
The Thompson also found service with the KNIL during their attempt to retake their former colony of Indonesia. Captured examples were later used by Indonesian forces against Dutch forces.
By the time of the Korean War, the Thompson had seen much use by the U.S. and South Korean military, even though Thompson had been replaced as standard issue by the M3/M3A1. With huge numbers of guns available in army ordnance arsenals, the Thompson remained classed as Limited Standard or Substitute Standard long after the standardization of the M3/M3A1. Many Thompsons were distributed to Chinese armed forces as military aid before the fall of Chiang Kai-shek's government to Mao Zedong's Communist forces in 1949 during the Chinese Civil War. During the Korean War, American troops were surprised to encounter Chinese Communist troops heavily armed with Thompsons, especially during surprise night assaults. The gun's ability to deliver large quantities of short-range automatic assault fire proved very useful in both defense and assault during the early part of the conflict. Many of these weapons were captured and placed into service with American soldiers and Marines for the balance of the war.
The Yugoslav Army received 34,000 M1A1 Thompsons during the 1950s as part of a US Military Aid to Yugoslavia Agreement. These guns were used during the Yugoslav Wars in the 1990s.
During the Cuban Revolution, the Thompson submachine gun was used by both Batista's army and Fidel Castro's guerrillas. Both the latter and the Brigade 2506 also used some during the bay of Pigs Invasion.
During the Vietnam War, some South Vietnamese army units and defense militia were armed with Thompson submachine guns, and a few of these weapons were used by reconnaissance units, advisors, and other American troops. It was later replaced by the M16 assault rifle. Not only did some U.S. soldiers have use of them in Vietnam, but they encountered them as well. The Viet Cong liked the weapon and used both captured models as well as manufacturing their own copies in small jungle workshops.
The Australian government destroyed most of their Thompson machine carbines in the 1960s. They shipped their remaining stocks to arm the forces of Lon Nol's Khmer Republic in 1975. They were then captured and used by the Khmer Rouge.
In the conflict in Northern Ireland, known as the Troubles (1969–1998), the Thompson was again used by the Irish Republican paramilitaries. According to historian Peter Hart, "The Thompson remained a key part of both the Official IRA and Provisional IRA arsenals until well into the 1970s when it was superseded by the Armalite and the AK-47."
The Thompson was also used by U.S. and overseas law enforcement and police forces, most prominently by the FBI. The FBI used Thompsons until they were declared obsolete and ordered destroyed in the early 1970s.
Because of their quality and craftsmanship, as well as their gangster-era and WWII connections, Thompsons are sought as collector's items. There were fewer than 40 pre-production prototypes. The Colt Patent Fire Arms Manufacturing Company in Hartford, Connecticut was contracted by the Auto-Ordnance Corporation to manufacture the initial mass production of 15,000 Thompson Submachine Guns in 1920. An original Colt Model 1921 A or AC, Model 1927 A or AC, Model 1928 Navy A or AC, properly registered in working condition with original components can easily fetch from US$25,000 to $45,000+ depending on condition and accessories. For WWII, approximately 1,700,000 Thompson Submachine Guns were produced by Auto-Ordnance and Savage Arms, with 1,387,134 being the simplified World War II M1 and M1A1 variants (without the Blish lock and oiling system).
A Model 1921A believed to have been owned by Bonnie and Clyde, but without historical documentation to substantiate this provenance, sold at auction on January 21, 2012, in Kansas City for $130,000.
Early versions of the Thompson, the Model 1919, had a fairly high cyclic rate of fire, as high as 1,200 rounds per minute (rpm), with most Model 1921s at 800 rpm. In 1927, the U.S. Navy ordered 500 Thompsons but requested a lower rate of fire. Thompson requested Payne develop a method of reducing the cyclic rate of fire. Payne replaced the actuator with a heavier one and the recoil spring with a stiffer one; the changes reduced the rate of fire from 800 to the 600 rpm of the U.S. Navy Model 1928. Later M1 and M1A1 Thompsons averaged also 600 rpm. This rate of fire, combined with a rather heavy trigger pull and a stock with an excessive drop, increases the tendency for the barrel to climb off target in automatic fire. Compared to more modern submachine guns, the .45 Thompson is quite heavy, weighing roughly the same as the contemporary M1 Garand semi-automatic rifle, and requires a lot of cleaning. This was one of the major complaints about the weapon by U.S. Army personnel to whom it was issued.
Although the drum magazine provided significant firepower, in military service it was found to be overly heavy and bulky, especially when slung on the shoulder while marching. [ citation needed ] For these reasons, the 20-round and later 30-round box magazines soon proved most popular with military users of the M1928A1, and drum compatibility was not included in the design of the wartime M1 and M1A1 models. The Thompson was one of the earliest submachine guns to incorporate a double-column, double-feed box magazine design, which undoubtedly contributed to the gun's reputation for reliability. In addition, the gun performed better than most after exposure to rain, dirt, and mud.The M1928A1 Thompson drum magazine was rather fragile, and cartridges tended to rattle inside it, producing unwanted noise.
The selective-fire (semi- or fully automatic) Thompson fires from the "open bolt" position, in which the bolt is held fully to rearward by the sear when cocked. When the trigger is depressed, the bolt is released, traveling forward to chamber and simultaneously fire the first and subsequent rounds until either the trigger is released or the ammunition is exhausted. This eliminates the risk of "cook-off", which can sometimes occur in closed-bolt automatic weapons.
The Thompson submachine gun varies in field strip procedure, depending on the variant. World War II-era M1 variants and RPB models field strip more easily than the M1921.[ citation needed ]
The 1928 variant can be disassembled easily by first detaching the stock, then sliding off the lower receiver and then simply removing the internal parts, cleaning them, and then putting it back together. When opened up, the Thompson features a small number of parts that need to be removed including the spring, bolt, Blish Lock, and actuator bolt.
There were two main experimental models of the Thompson. The Persuader was a belt-fed version developed in 1917/18. It was partially built, but never completely finished. The Annihilator, serial no. Ver 10 prototypes was similar in appearance to the later models, but without rear sight and butt stock mounts. The Annihilator prototypes first were fed from a 20-round box magazine, but later, the 50- and 100-round drum magazine models were developed.
Starting with the Serial no. 11, the Model 1919 takes the final appearance of the later Thompsons with the rear sights and the butt stock. The Model 1919 was limited to about 40 units; the first built did not use the drums, as it was too difficult to fire. Many variations have been noted within this model. The weapons had very high cyclic rates up to 1,500 rpm. This was the weapon Brigadier General Thompson demonstrated at Camp Perry in 1920. A number of Model 1919s were made without butt stocks, rear- and front sights, but the final version closely resembled the later Model 1921. This model was designed to "sweep" trenches with bullets. The New York City Police Department was the largest purchaser of the M1919. Some experimental calibers aside the .45 ACP (11.4x23mm) were the .22LR, .32 ACP, .38 ACP, and 9mmP.
Only one prototype was made in .351 WSL using a standard 20" barrel and an ROF of 1000rpm.
The layout and ergonomics of the Thompson submachine gun were also considered for the role of a Light Rifle before the adoption of the M1 Carbine. It was based on the M1921/27 variants. However, it was turned down without testing due to logistic problems.
A .30-06 variant was intended as a rival to the M1918 BAR. It had an extended receiver with a recoil buffer and fed from 20 round magazines.
The Model 1921 (M1921) was the first major production model. Fifteen thousand were produced by Colt for Auto-Ordnance. In its original design, it was finished more like a sporting weapon, with an adjustable rear sight, a blued, finned barrel and vertical foregrip (or pistol grip) and the Blish lock. The M1921 was quite expensive to manufacture, with the original retail price around $200, because of its high-quality wood furniture and finely machined parts. The M1921 was famous throughout its career with police and criminals and in motion pictures. This model gained fame from its use by criminals during Prohibition, and was nicknamed "tommy gun" by the media.[ citation needed ]
The Model 1923 was a heavy submachine gun introduced to potentially expand the Auto-Ordnance product line and was demonstrated for the U.S. Army. 250 gr (0.57 oz ; 16 g ) bullet at muzzle velocities of about 1,450 ft/s (440 m/s) and energy about 1,170 ft⋅lb (1,590 J ), with greater range than the .45 ACP. It introduced a horizontal forearm, improved inline stock for accuracy, 14 in (36 cm) barrel, bipod, and bayonet lug. The M1923 was intended to rival the M1918 Browning Automatic Rifle (BAR), with which the Army was already satisfied. The Army did not give the Model 1923 much consideration, so it was not adopted.It fired the more powerful .45 Remington–Thompson cartridge which fired a heavier
While not a new model in the usual sense of incorporating major changes, in 1926 the Cutts Compensator (a muzzle brake) was offered as an option for the M1921; Thompsons with the compensator were cataloged as No. 21AC at the original price of $200.00, with the plain M1921 designated No. 21A at a reduced price of $175.00.The Model 1921 was thereafter referred to as Model 1921A or Model 1921AC, though some collectors still refer to it as the Model 1921.
The Model 1928 was the first type widely used by military forces, with the U.S. Navy and U.S. Marine Corps as major buyers through the 1930s. The original Model 1928s were Model 1921s with weight added to the actuator, which slowed down the cyclic rate of fire, a United States Navy requirement. On these guns, the model number "1921" on the receiver was updated by stamping an "8" over the last "1". The Navy Model 1928 has several names among collectors: the "Colt Overstamp", "1921 Overstamp", "28 Navy", or just "28N".
The 1928 Thompson would be the last small arm adopted by the U.S. Army that used a year designation in the official nomenclature. With the start of World War II, major contracts from several countries saved the manufacturer from bankruptcy. A notable variant of the Model 1928 with an aluminum receiver and tenite grip, buttstock, and forend, was made by Savage.
The M1928A1 variant entered mass production before the attack on Pearl Harbor, as on-hand stocks ran out. Changes included a horizontal forend, in place of the distinctive vertical foregrip ("pistol grip"), and a provision for a military sling. Despite new U.S. contracts for Lend-Lease shipments abroad to China, France, and the United Kingdom, as well as the needs of American armed forces, only two factories supplied M1928A1 Thompsons during the early years of World War II. Though it could use both the 50-round drum and the 20- or 30-round box magazines, active service showed the drums were more prone to jamming, rattled when moving, and were too heavy and bulky on long patrols. 562,511 were made. Wartime production variants had a fixed rear sight without the triangular sight guard wings and a non-ribbed barrel, both like those found on the M1/M1A1.
In addition, the Soviet Union received M1928A1s, included as standard equipment with the M3 light tanks obtained through Lend-Lease. The weapons were never issued to the Red Army because of a lack of .45 ACP ammunition on the Eastern Front; they were simply put in storage, although a picture exists of what appears to be Thompsons being used by Russian M3 Stuart crews in the Caucasus. As of September 2006, limited numbers of these weapons have been re-imported from Russia to the United States as disassembled "spare parts kits", comprising the entire weapon less the receiver (as required by Federal law).
An M1928A1 which also came with an unusual inline stock, modified with elevated sights to increase accuracy also existed.
This section needs additional citations for verification . (February 2016) (Learn how and when to remove this template message)
In 1940 Commonwealth troops in Egypt and North Africa were issued commercial model Lend-Lease Colt- and Savage-manufactured M1928s. Section leaders carried them instead of pistols or rifles. Many of the Colt models had French-language manuals packed with them as they had been abruptly diverted to England after the fall of France. They soon discovered that the weapon was prone to jamming due to sand. To fix this, the armorers removed the Blish Lock and replaced it with a hex bolt to keep the cocking handle and bolt together. The 20-round Type XX magazines had their peep-holes welded shut to keep sand out and the 50-round Type L drums were discontinued. Ammunition was scarce as it was either in small lots of Lend-Lease commercial ammo or obtained from adjacent American troops. It was later replaced by the 9mm Sten gun and Lanchester SMG.
The Japanese captured enough Thompson M1928 SMGs and ammunition when they captured Hong Kong and Malaysia that it became a limited standard weapon. It surpassed any similar weapons currently in their service. Ammunition was usually in US 42-round Lend-Lease commercial cartons or Australian 28-round military cartons captured from the Commonwealth forces that was sampled, tested, and resealed with Japanese arsenal stickers.
Models used in the Pacific by Australian troops had their sling swivels remounted on the left side to allow it to be fired more easily while prone. A metal sling mount was fitted to the left side of the wooden buttstock. Ammunition was manufactured in Australia or obtained from adjacent American troops. It was later replaced by the Owen Machine Carbine.
Responding to a request for further simplification, the M1 was standardized in April 1942 as the United States Submachine Gun, Cal. .45, M1. Rate of fire was reduced to approximately 600-700 rpm.
First issued in 1943, the M1 uses a simple blowback operation, with the charging handle moved to the side. The flip-up adjustable Lyman rear sight was replaced with a fixed L sight. Late M1s had triangular guard wings added to the rear L sight, which were standardized on the M1A1. The slots adjoining the magazine well allowing the use of a drum magazine were removed. A new magazine catch with the provision for retaining drum magazines removed, was produced, but most M1s and later M1A1s retained the original. The less expensive and more-easily manufactured "stick" magazines were used exclusively in the M1, with a new 30-round version joining the familiar 20-round type. The Cutts compensator, barrel cooling fins, and Blish lock were omitted while the buttstock was permanently affixed. Late production M1 stocks were fitted with reinforcing bolts and washers to prevent splitting of the stock where it attached to the receiver. The British had used improvised bolts or wood screws to reinforce M1928 stocks. The M1 reinforcing bolt and washer were carried over to the M1A1 and retrofitted to many of the M1928A1s in U.S. and British service. Late M1s also had simplified fire control switches, also carried over to the M1A1.
The M1A1, standardized in October 1942 as the United States Submachine Gun, Cal. .45, M1A1, could be produced in half the time of the M1928A1, and at a much lower cost. The main difference between the M1 and M1A1 was the bolt. The M1 bolt had a floating firing pin and hammer, the bolt of the M1A1 had the firing pin machined to the face of the bolt, eliminating unnecessary parts. The reinforced stock and protective sight wings were standard. The 30-round magazine became more common. In 1939, Thompsons cost the government $209 apiece. By the spring of 1942, cost-reduction design changes had brought this down to $70. In February 1944, the M1A1 reached a low price of $45 each, including accessories and spare parts, although the difference in price between the M1 and M1A1 was only $0.06. By the end of the war, the M1A1 was replaced with the even lower-cost M3 (commonly called the "Grease Gun").
The Model 1927 was the open bolt semi-automatic-only version of the M1921. It was made by modifying an existing Model 1921, including replacing certain parts. The "Thompson Submachine Gun" inscription was machined over to replace it with "Thompson Semi-Automatic Carbine", and the "Model 1921" inscription was also machined over to replace it with "Model 1927." Although the Model 1927 was semi-automatic only, it was easily converted to fully automatic by installing a full-auto Model 1921 fire control group (internal parts). Most Model 1927s owned by police have been converted back to full-auto.The original Model 1927 is classified as a machine gun under the National Firearms Act of 1934 (a) by being "readily convertible" by swapping parts and (b) by a 1982 BATF ruling making all open bolt semi-automatic firearms manufactured after the date of this ruling classified as machine guns.
The Model 1927A1 is a semi-automatic only replica version of the Thompson, originally produced by Auto-Ordnance of West Hurley, New York for the civilian collector's market from 1974 to 1999. It has been produced since 1999 by Kahr Arms of Worcester, Massachusetts. It is officially known as the "Thompson Semi-Automatic Carbine, Model of 1927A1." The internal design is completely different to operate from the closed bolt and the carbine has barrel length of 16.5 in (420 mm) (versus open bolt operation and barrel length of 10.5 in (270 mm) for the full automatic versions). Under federal regulations, these changes make the Model 1927A1 legally a rifle and remove it from the federal registry requirements of the National Firearms Act. These modern versions should not be confused with the original semi-automatic M1927, which was a slightly modified M1921 produced by Colt for Auto-Ordnance.
The Model 1927A1 is the semi-automatic replica of the Thompson Models of 1921 and 1927. The "Thompson Commando" is a semi-automatic replica of the M1928A1. The Auto-Ordnance replica of the Thompson M1 and M1A1 is known as the TM1, and may be found marked "Thompson Semi-Automatic Carbine, Caliber .45M1".
The Model 1927A3 is a semi-automatic, .22 caliber version of the Thompson produced by Auto-Ordnance in West Hurley.
The Model 1927A5 is a semi-automatic, .45 ACP pistol version of the Thompson originally produced by Auto-Ordnance in West Hurley from the 1970s until the early 1990s or late '80s. It featured an aluminum receiver to reduce weight. It has since been replaced with the Kahr Arms TA5 Pistol, which features a 10.5" barrel and steel receiver, unlike the 1927A5's 13" barrel and aluminum receiver.
As per the NFA (National Firearms Act of 1934), the "1927A5 .45 ACP Pistol" is simply classified as a "Firearm" (Any type of firearm with an overall length of 26" or greater, that does not have a buttstock) as it neither fits the definition of a Pistol or Rifle under federal law. This categorization also legally allows it to have 1921 or 1928 style foregrip equipped, unlike other "pistol style" Thompson variants, without an AOW (Any Other Weapon) Tax Stamp.
The 1928A1 LTD is a civilian semi-automatic-only conversion by Luxembourg Defense Technology (LuxDefTec) in Luxembourg. They are made from original 1928A1 guns of various appearance (with or without Cutt's compensator, ribbed or smooth barrels, adjustable or fixed sights), that where imported Lend-Lease guns from Russia.
In an attempt to expand interest and sales overseas, Auto-Ordnance entered into a partnership with and licensed the Birmingham Small Arms Company Limited (BSA) in England to produce a European model. These were produced in small quantities and have a different appearance than the classic style. The BSA 1926 was manufactured in 9mmP and 7.63mm Mauser and were tested by various governments, including France, in the mid-1920s. It was never adopted by any military force, and only a small number were produced.
A special purpose machine pistol variant of the Thompson is manufactured by RPB Industries of Atlanta.
A version with a threaded barrel for suppressors, side folding stock, and modified sights.
All variants and modified versions of Thompson Submachine Guns (even semiautomatic-only versions) are prohibited by name in Canada, as part of Prohibited Weapons Order No. 13 in 1995. Consequently, they cannot be legally imported or owned except under very limited circumstances. For example, to own one the person must be "grandfathered" and have owned one before the bill was passed against it. The submachine gun is not grandfathered like in US, only the owner. The submachine gun can only be sold to other grandfathered individuals; this keep prices extremely low as the number of permitted licensed individuals is very small and dwindling with time. Eventually, all prohibited guns will be confiscated. Part 1.86:
The perceived popularity of submachine guns such as the Thompson with violent gangsters in the 1920s and 1930s was one of the main reasons given for passage of the National Firearms Act by the United States Congress in 1934. One of its provisions was that owners of fully automatic firearms were required to register them with the predecessor agency of the modern Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF). The law also placed restrictions on the possession, transfer, and transport of the weapons.
There are several U.S. made automatic and semi-automatic variants, copies, or replicas. The semi-automatic versions are less regulated by federal law.
The possession of any fully automatic firearm is prohibited in the UK by the Firearms Act 1968; prohibited firearms can be possessed on a section 5 certificate, but these are not issued to civilians. A fully automatic firearm that has been converted to semi-automatic fire, such as the Model 1927, is prohibited by the Firearms Act 1988, as is any centre-fire purpose-made semi-automatic weapon, such as the Model 1927A1. It is now effectively impossible for a firearm of this type to be legally possessed by a member of the general public, except in certified deactivated condition.
The gun, in a government approved semi automatic conversion or clone, can legally be owned by hunters and sport shooters. With a design date prior to 1942 it isn't considered a "weapon of war" any more. Only the fully automatic version is considered a prohibited weapon. As a long gun, it can be bought by hunters (even if it can't be used to actually hunt for legal reasons). There are disciplines in government approved sport shooting rulebooks that allow this type to be used, therefore the gun can be bought by sport shooters, too.
This section needs additional citations for verification . (February 2016) (Learn how and when to remove this template message)
The MP5 is a 9x19mm Parabellum submachine gun, developed in the 1960s by a team of engineers from the German small arms manufacturer Heckler & Koch GmbH (H&K) of Oberndorf am Neckar. There are over 100 variants of the MP5, including some semi-automatic versions.
A machine gun is a fully automatic mounted or portable firearm designed to fire rifle cartridges in rapid succession from an ammunition belt or magazine for the purpose of suppressive fire. Not all fully automatic firearms are machine guns. Submachine guns, rifles, assault rifles, battle rifles, shotguns, pistols or cannons may be capable of fully automatic fire, but are not designed for sustained fire. As a class of military rapid-fire guns, machine guns are fully automatic weapons designed to be used as support weapons and generally used when attached to a mount- or fired from the ground on a bipod or tripod. Many machine guns also use belt feeding and open bolt operation, features not normally found on rifles.
A machine pistol is typically a handgun-style machine gun, capable of fully automatic or burst fire. The term is a calque of the German word "Maschinenpistole". They were developed during World War I, and originally issued to German artillery crews who needed a self-defense weapon, lighter than a rifle but more effective than a standard pistol. Today, machine pistols are considered a special purpose weapon with limited utility, and difficult for all but the best shooters to control.
The Uzi is a family of Israeli open-bolt, blowback-operated submachine guns. Smaller variants are often considered to be machine pistols. The Uzi was one of the first weapons to use a telescoping bolt design which allows the magazine to be housed in the pistol grip for a shorter weapon.
The M1 carbine is a lightweight, easy to use, .30 caliber semi-automatic carbine that was a standard firearm for the U.S. military during World War II, the Korean War and well into the Vietnam War. The M1 carbine was produced in several variants and was widely used by not only the U.S. military, but by military, paramilitary and police forces around the world. It has also been a popular civilian firearm.
A semi-automatic firearm, also called self-loading firearm or autoloading firearm, is one that not only fires a bullet each time the trigger is pulled, but also performs all steps necessary to prepare it to discharge again—assuming cartridges remain in the firearm's feed device. Typically, this includes extracting and ejecting the spent cartridge case from the firing chamber, re-cocking the firing mechanism, and loading a new cartridge into the firing chamber. To fire again, the trigger is released and re-pressed.
The .45 Reising submachine gun was manufactured by Harrington & Richardson (H&R) Arms Company in Worcester, Massachusetts, USA, and was designed and patented by Eugene Reising in 1940. The three versions of the weapon were the Model 50, the folding stock Model 55, and the semiautomatic Model 60 rifle. Over 100,000 Reisings were ordered during World War II, and were initially used by the United States Navy, Marine Corps, and the United States Coast Guard, though some were shipped to Canadian, Soviet, and other allied forces to fight the Axis powers.
The Military Armament Corporation Model 10, officially abbreviated as "M10" or "M-10", and more commonly known as the MAC-10, is a compact, blowback operated machine pistol that was developed by Gordon B. Ingram in 1964. It is chambered in either .45 ACP or 9mm. A two-stage suppressor by Sionics was designed for the MAC-10, which not only abated the noise created, but made it easier to control on full automatic. For a decade, the civilian version of the weapon was banned in the U.S. under the assault weapons ban enacted by Congress in 1994.
The Ingram MAC-11 is a subcompact machine pistol developed by American gun designer Gordon Ingram at the Military Armament Corporation (MAC) during the 1970s in Powder Springs, Georgia. The weapon is a sub-compact version of the Model 10 (MAC-10), and is chambered to fire the smaller .380 ACP round.
A magazine is an ammunition storage and feeding device within or attached to a repeating firearm. Magazines can be removable (detachable) or integral (internal/fixed) to the firearm. The magazine functions by moving the cartridges stored within it into a position where they may be loaded into the barrel chamber by the action of the firearm. The detachable magazine is often colloquially referred to as a clip, although this is technically inaccurate.
A fully automatic firearm is said to fire from an open bolt if, when ready to fire, the bolt and working parts are held to the rear of the receiver, with no round in the chamber. When the trigger is actuated, the bolt travels forward, feeds a cartridge from the magazine or belt into the chamber, and fires that cartridge in the same movement. Like any other self-loading design, the action is cycled by the gas expended from the round, hence the necessity of a gas system; this excess of gas sends the bolt back to the rear, ejecting the empty cartridge case and preparing for the next shot. Generally, an open-bolt firing cycle is used for fully automatic weapons and not for semi-automatic weapons. Firearms using advanced primer ignition blowback inherently fire from open bolt only.
Blowback is a system of operation for self-loading firearms that obtains energy from the motion of the cartridge case as it is pushed to the rear by expanding gas created by the ignition of the propellant charge.
The Hyde-Inland M2 was a United States submachine gun design submitted for trials at Aberdeen Proving Ground in February, 1941. Work was undertaken by General Motors Inland Manufacturing Division to develop workable prototypes of George Hyde's design patented in 1935. The model first submitted for trials in April 1942 was designated the Hyde-Inland 1. Trials revealed the design was superior to the M1 submachine gun in mud and dirt tests, and its accuracy in full-automatic firing was better than any other submachine gun tested at the time. An improved Hyde-Inland 2 was designated U.S. Submachine gun, Caliber .45, M2 as a substitute standard for the M1 Thompson in April, 1942. As Inland's manufacturing capacity became focused on M1 carbine production, the US Army contracted M2 production to Marlin Firearms in July, 1942. Marlin began production in May 1943. Marlin's production failed to match the trials prototype performance; and Marlin's original contract for 164,450 M2s was canceled in 1943 upon adoption of the M3 submachine gun. The M2 is chambered for the .45 ACP cartridge and used the same 20- or 30-round magazine as the Thompson. Its cyclic rate of fire is 570 rounds per minute. None of the approximately 400 manufactured were issued by any branches of the United States military.
The MAB 38, Modello 38, or Model 38 and its variants were a series of official submachine guns of the Royal Italian Army introduced in 1938 and used during World War II. The guns were also used by the German, Romanian, and Argentine armies of the time.
The MP34 is a submachine gun (SMG) that was manufactured by Waffenfabrik Steyr as Steyr-Solothurn S1-100 and used by the Austrian Gendarmerie and subsequently by units of the German Army and the Waffen SS, in World War II. An exceptionally well-made weapon, it was used by some forces well into the 1970s.
The Smith & Wesson M76 submachine gun was produced by Smith & Wesson from 1967 to 1974. It is an adaptation of the Swedish Carl Gustav m/45 with an open bolt design and fires 9×19mm Parabellum ammunition.
The M3 is an American .45-caliber submachine gun adopted for U.S. Army service on 12 December 1942, as the United States Submachine Gun, Cal. .45, M3. The M3 was chambered for the same .45 ACP round fired by the Thompson submachine gun, but was cheaper to produce and lighter, although, contrary to popular belief, it was less accurate. This myth stems from a US Army training film portraying the M3 as more accurate than its counterparts. The M3 was commonly referred to as the "Grease Gun" or simply "the Greaser," owing to its visual similarity to the mechanic's tool.
Auto-Ordnance is a U.S. arms development firm founded by retired Colonel John T. Thompson of the U.S. Army Ordnance Department in 1916. Auto-Ordnance is best known for the Thompson submachine gun, notorious as a gangster weapon of the Roaring Twenties and famous as a military weapon of the Allied forces in World War II.
|Wikimedia Commons has media related to M1 Thompson .|