.455 Webley

Last updated
.455 Webley
455 Webley Revolver.jpg
A variety of .455 Webley cartridges
Type Revolver
Place of origin United Kingdom
Production history
Manufacturer Royal Laboratory Woolwich Arsenal, Birmingham Small Arms Company, Eley Brothers, Kynoch Limited, Grenfell & Accles, Kings Norton Metal Company, Dominion Cartridge Company.
VariantsMk I / Mk II [1]
Specifications
Case typeStraight, rimmed
Bullet diameter0.454/0.454 in (11.5/11.5 mm)
Neck diameter0.473/0.476 in (12.0/12.1 mm)
Shoulder diameterna / na
Base diameter0.478/0.480 in (12.1/12.2 mm)
Rim diameter0.530/0.535 in (13.5/13.6 mm)
Rim thickness0.039/0.045 in (0.99/1.14 mm)
Case length0.886/0.770 in (22.5/19.6 mm)
Overall length1.460/1.230 in (37.1/31.2 mm)
Case capacity23.23/18.30  gr H2O (1.505/1.186 cm3)
Primer typeLarge pistol (Small pistol in modern Fiocchi loadings)
Maximum pressure13,000 psi (90 MPa)
Ballistic performance
Bullet mass/typeVelocityEnergy
265 gr (17 g) FMJ [2] 700 ft/s (210 m/s)289 ft⋅lbf (392 J)
265 gr (17 g) 600 ft/s (180 m/s)212 ft⋅lbf (287 J)
265 gr (17 g) 757 ft/s (231 m/s)337 ft⋅lbf (457 J)
265 gr (17 g) 600 ft/s (180 m/s) [3] 220 ft⋅lbf (300 J)
200 gr (13 g) 900 ft/s (270 m/s)360 ft⋅lbf (490 J)

.455 Webley is a British handgun cartridge, most commonly used in the Webley top break revolvers Marks I through VI. It is also known as ".455 Eley" and ".455 Colt".

Contents

The .455 cartridge was a service revolver cartridge, featuring a rimmed cartridge firing a .455 in (11.5 mm) bullet at the relatively low velocity of 650 ft/s (190 m/s). The result was a cartridge and handgun combination with comparatively mild recoil. The .455 MK III "cupped" cartridge was rated superior to the .45 Colt in stopping power in the disputed United States Thompson-LaGarde Tests of 1904 that resulted in the adoption by the U.S. of the .45 ACP cartridge.

The .455 Webley cartridge remained in service with British and Commonwealth forces until the end of the Second World War.

Variants

Six main types of .455 ammunition were produced:

In addition to the Webley revolvers, the British and Canadian armies also ordered several thousand Smith & Wesson .44 Hand Ejector revolvers, chambered in .455 Webley, in a rush to equip their troops for the Great War. The urgency was such that the earliest of these were converted from revolvers already completed and chambered for .44 Special. Approximately 60,000 Colt New Service revolvers were also purchased, in .455.

The Italian firm Fiocchi and American firm Hornady are currently the only commercial manufacturers of the .455 Webley cartridge (in Mk II).[ citation needed ]

.455 Webley Auto

The .455 Webley Auto Mk I cartridge was produced from 1913 to about the middle of World War II. This is a semi-rimmed cartridge for the Webley & Scott Self Loading pistols.

The early version of the cartridge (c.1904) had a shorter[ clarification needed ]21.7 mm (0.85 in) semi-rimmed case with a narrow rim and a pointed bullet. A later improved version of the cartridge (c.1910) was similar except it had a 23.54 mm (0.93 in) long case and a round-nosed bullet. The Mk 1 service round (c.1913) was identical to the 1910 version of the cartridge except it had a thicker rim.

The Mk 1 cartridge's bullet headspaced on the rim. It was loaded with a 224  gr (14.5  g ; 0.51  oz ) cupro-nickel-jacketed bullet with a muzzle velocity of 700 ft/s (210 m/s). [6]

Various sub machine guns were tested using this cartridge however none were adopted.

World War One use

The Webley & Scott pistol was sold to the Royal Flying Corps and Royal Navy during World War I. There were also some Colt M1911 pistols chambered in .455 Auto purchased by the Royal Navy. Although not a standard sidearm or a standard service cartridge, a few Colt M1911 "British service models" chambered in .455 Auto were sold commercially to British navy and army officers through outfitters. The service ammunition came packed in seven-round boxes stamped "not for revolvers" to prevent confusion.

.476 Enfield

Despite the apparent difference in calibre name, .476 Enfield was quite similar to the .455 Webley. The .476 had a 0.05 mm (0.002 in) shorter case than the .455 Mark I and could be fired in weapons regulated and marked as safe for the calibre, such as the Webley "WG Army" model. This had a cylinder that was long enough to accommodate the significantly longer cartridge in which the bullet swelled out to .476" beyond the case. It would not chamber in any government-issue .455 Webley Marks I–VI. [3] [7] The .450 Adams (1868), .476 Enfield (1881), and .455 Webley Mk.I (1891) British service cartridges all featured a case diameter of .476 inch [12.09mm].

See also

Notes

  1. Donnelly, John J. and Donnelly, Judy, The Handloader's Manual of Cartridge Conversion, (Skyhorse Publishing, NY/NY, 2011), pp. 371,372.
  2. Mark I factory load, Kynoch black powder. Barnes, Frank C., ed. Amber, John T. Cartridges of the World (DBI, 1972), p. 174, ".455 Revolver MK-1/.455 Colt".
  3. 1 2 3 4 Barnes, p. 175, ".476 Ely/.476 Enfield Mk-3".
  4. Chamberlain, W.H.J. and Taylerson, A.W.F. Revolvers of the British Services 1854–1954 (Bloomfield, Ont,: Museum Restoration Service, 1989), p. 33.
  5. Harris, Lynn H. Notes on .455 Webley Revolver Cartridges (Wellington, NZ: self-published, 1987), p. 12.
  6. Wilson (1943) p.228
  7. Maze, Robert J. Howdah to High Power (Tucson, AZ: Excalibur Publications, 2002), p. 32.

Related Research Articles

<span class="mw-page-title-main">.45 ACP</span> Pistol cartridge designed by John Moses Browning

The .45 ACP, also known as .45 Auto, .45 Automatic, or 11.43×23mm is a rimless straight-walled handgun cartridge designed by John Moses Browning in 1904, for use in his prototype Colt semi-automatic pistol. After successful military trials, it was adopted as the standard chambering for Colt's M1911 pistol. The round was developed due to a lack of stopping power experienced in the Moro Rebellion in places like Sulu. The issued ammunition, .38 Long Colt, had proved inadequate, motivating the search for a better cartridge. This experience and the Thompson–LaGarde Tests of 1904 led the Army and the Cavalry to decide that a minimum of .45 caliber was required in a new handgun cartridge.

<span class="mw-page-title-main">.38 Super</span> Pistol cartridge designed by Colts Manufacturing Company, LLC

The .38 Super, also known as .38 Super Auto, .38 Super Automatic, .38 Super Automatic +P , .38 Super +P , or 9×23mmSR, is a pistol cartridge that fires a 0.356-inch-diameter (9.04 mm) bullet. It was introduced in the late 1920s as a higher pressure loading of the .38 ACP, also known as .38 Auto. The older .38 ACP cartridge propels a 130-grain (8.4 g) bullet at 1,050 ft/s (320.0 m/s), whereas the .38 Super pushes the same bullet at 1,280 ft/s (390.1 m/s). The .38 Super has gained distinction as the caliber of choice for many top practical shooting competitors; it remains one of the dominant calibers in IPSC competition.

<span class="mw-page-title-main">Webley Revolver</span> UK service revolver from 1887 to 1970

The Webley Revolver was, in various designations, a standard issue service pistol for the armed forces of the United Kingdom, and countries of the British Empire and the Commonwealth of Nations, from 1887 to 1970.

<span class="mw-page-title-main">Webley & Scott</span> British arms manufacturer

Webley & Scott is an arms manufacturer founded in Birmingham, England. Webley produced handguns and long guns from 1834 to 1979, when the company ceased to manufacture firearms and instead turned its attention to producing air pistols and air rifles. In 2010 Webley & Scott restarted the production of shotguns for commercial sale.

<span class="mw-page-title-main">.303 British</span> British military rifle cartridge

The .303 British or 7.7×56mmR, is a .303-inch (7.7 mm) calibre rimmed rifle cartridge. The .303 inch bore diameter is measured between rifling lands as is the common practice in Europe which follows the traditional black powder convention.

<span class="mw-page-title-main">.38 S&W</span> Revolver cartridge

The .38 S&W, also commonly known as .38 S&W Short, 9×20mmR, .38 Colt NP , or .38/200, is a revolver cartridge developed by Smith & Wesson in 1877. Versions of the cartridge were the standard revolver cartridges of the British military from 1922 to 1963. Though similar in name, it is not interchangeable with the later .38 Special due to a different case shape and slightly larger bullet diameter.

<span class="mw-page-title-main">11 mm caliber</span> Firearm cartridge classification

This is a list of firearm cartridges which have bullets in the 11 millimetres (0.43 in) to 11.99 millimetres (0.472 in) caliber range.

<span class="mw-page-title-main">Enfield revolver</span> Service revolver

The Enfield Revolver was a self-extracting British handgun designed and manufactured at the government-owned Royal Small Arms Factory in Enfield, initially in the .476 calibre.

A rim is an external flange that is machined, cast, molded, stamped, or pressed around the bottom of a firearms cartridge. Thus, rimmed cartridges are sometimes called "flanged" cartridges. Almost all cartridges feature an extractor or headspacing rim, in spite of the fact that some cartridges are known as "rimless cartridges". The rim may serve a number of purposes, including providing a lip for the extractor to engage, and sometimes serving to headspace the cartridge.

<span class="mw-page-title-main">Moon clip</span> Ring-shaped holder for revolver cartridges

A moon clip is a ring-shaped or star-shaped piece of metal designed to hold multiple cartridges together as a unit, for simultaneous insertion and extraction from a revolver cylinder. Moon clips may either hold an entire cylinder's worth of cartridges together, half a cylinder, or just two neighboring cartridges. The two-cartridge moon clips can be used for those revolvers that have an odd number of loading chambers such as five or seven and also for those revolvers that allow a shooter to mix both rimless and rimmed types of cartridges in one loading of the same cylinder.

<span class="mw-page-title-main">M1917 Revolver</span> Revolver

The M1917 Revolvers were six-shot, .45 ACP, large frame revolvers adopted by the United States Military in 1917, to supplement the standard M1911 pistol during World War I. There were two variations of the M1917, one made by Colt and the other by Smith & Wesson. They used moon-clips to hold the cartridges in position, facilitate reloading, and to aid in extraction since revolvers had been designed to eject rimmed cartridges and .45 ACP rounds were rimless for use with the magazine-fed M1911. After World War I, they gained a strong following among civilian shooters. A commercial rimmed cartridge, the .45 Auto Rim, was also developed, so M1917 revolvers could eject cartridge cases without using moon-clips.

<span class="mw-page-title-main">.38 ACP</span> Pistol cartridge designed by John Moses Browning

The .38 ACP, also known as the .38 Auto or 9x23mmSR, is a semi-rimmed pistol cartridge that was introduced at the turn of the 20th century for the John Browning-designed Colt M1900. It was first used in Colt's Model 1897 prototype, which he did not produce. The metric designation for the round is 9×23mm SR (semi-rimmed), which is not to be confused with other 9×23mm cartridges.

<span class="mw-page-title-main">Beaumont–Adams revolver</span> Former British Army weapon

The Beaumont–Adams revolver is a black powder, double-action, percussion revolver. Originally adopted by the British Army in .442 calibre in 1856, it was replaced in British service in 1880 by the .476 calibre Enfield Mk I revolver.

<span class="mw-page-title-main">Pistol</span> Type of handgun where the firing chamber is integral to the barrel

A pistol is a type of handgun, characterized by a barrel with an integral chamber. The word "pistol" is derived from the Middle French pistolet, meaning a small gun or knife, and first appeared in the English language c. 1570 when early handguns were produced in Europe. In colloquial usage, the word "pistol" is often used as a generic term to describe any type of handgun, inclusive of revolvers and the pocket-sized derringers.

<span class="mw-page-title-main">.41 Action Express</span> Pistol cartridge designed by Evan Whildin

The .41 Action Express is a pistol cartridge developed in 1986 to reproduce the performance of the .41 Magnum police load in semi-automatic pistols.

<span class="mw-page-title-main">Colt New Service</span> Revolver

The Colt New Service is a large frame, large caliber, double-action revolver made by Colt from 1898 until 1941. Made in various calibers, the .45 Colt version with a 5½" barrel, was adopted by the U.S. Armed Forces as the Model 1909.

<span class="mw-page-title-main">.476 Enfield</span> Black powder revolver cartridge

The .476 Enfield, also known as the .476 Eley, .476 Revolver, and occasionally .455/476, is a British centrefire black powder revolver cartridge. The Enfield name derives from the location of the Royal Small Arms Factory at Enfield Lock, the armoury where British military small arms were produced, while Eley was a British commercial brand. Used in the Enfield Mk II revolver, the Mk III variant was introduced by the British Army in 1881, supplanting the earlier .476 Enfield Mark I and II cartridges, which in turn had replaced the .450 Adams cartridges, all of which also used black powder propellant.

<span class="mw-page-title-main">.450 Adams</span>

The .450 Adams was a British black powder centrefire revolver cartridge, initially used in converted Beaumont–Adams revolvers, in the late 1860s. Officially designated .450 Boxer Mk I, and also known variously as the .450 Revolver, .450 Colt, .450 Short, .450 Corto, and .450 Mark III, and in America as the .45 Webley, it was the British Army's first centrefire revolver round.

<span class="mw-page-title-main">Webley Self-Loading Pistol</span> Type of semi-automatic pistol

The Webley Self-Loading Pistol was an early magazine-fed pistol. The gun was designed in 1910 by the Webley & Scott company. The Mk. 1 entered police service in 1911 in a .32 ACP model for the London Metropolitan Police. The .455 version was adopted by the Royal Navy in 1912 as the first automatic pistol in British service. The pistol was also adopted by the Royal Horse Artillery and the Royal Flying Corps. Its predecessor was the unsuccessful Mars Automatic Pistol.

<span class="mw-page-title-main">Enfield No. 2</span> Service revolver

The Enfield No. 2 was a British top-break revolver using the .38 S&W round manufactured from 1930 to 1957. It was the standard British/Commonwealth sidearm in the Second World War, alongside the Webley Mk IV and Smith & Wesson Victory Model revolvers chambered in the same calibre. Note that in the context of British service revolvers, the .38 S&W cartridge has often been called ".380".

References