Cordite

Last updated

A stick of cordite from World War II Cordite.jpg
A stick of cordite from World War II
A sectioned British 18-pounder field gun shrapnel round, World War I, with bound string to simulate the appearance of the original cordite propellant Sectioned British 18-pounder shrapnel round photograph.jpg
A sectioned British 18-pounder field gun shrapnel round, World War I, with bound string to simulate the appearance of the original cordite propellant
Close-up of cordite filaments in a .303 British Rifle cartridge (manufactured in 1964) Cordite Filled Cartridge.JPG
Close-up of cordite filaments in a .303 British Rifle cartridge (manufactured in 1964)
Burning a strand of cordite from a .303 British round

Cordite is a family of smokeless propellants developed and produced in Britain since 1889 to replace black powder as a military firearm propellant. Like modern gunpowder, cordite is classified as a low explosive because of its slow burning rates and consequently low brisance [ not verified in body ]. These produce a subsonic deflagration wave rather than the supersonic detonation wave produced by brisants, or high explosives [ not verified in body ]. The hot gases produced by burning gunpowder or cordite generate sufficient pressure to propel a bullet or shell to its target, but not so quickly as to routinely destroy the barrel of the gun. [ not verified in body ]

Contents

Cordite was used initially in the .303 British, Mark I and II, standard rifle cartridge between 1891 and 1915.[ not verified in body ] Shortages of cordite in World War I led to the creation of the "Devil's Porridge" munitions factory (HM Factory, Gretna) on the English–Scottish border, which produced around 800 tonnes of cordite per week. The UK also imported some United States–developed smokeless powders for use in rifle cartridges. Cordite was also used for large weapons, such as tank guns, artillery, and naval guns. It has been used mainly for this purpose since the late 19th century by the UK and British Commonwealth countries. Its use was further developed before World War II, and as 2-and-3-inch-diameter (51 and 76 mm) Unrotated Projectiles for launching anti-aircraft weapons. [1] Small cordite rocket charges were also developed for ejector seats made by the Martin-Baker Company. Cordite was also used in the detonation system of the Little Boy atomic bomb dropped over Hiroshima in August 1945. [2]

The term "cordite" generally disappeared from official publications between the wars. During World War II, double-base propellants were very widely used, and there was some use of triple-base propellants by artillery. Triple-base propellants were used in post-war ammunition designs and remain in production for UK weapons; most double-base propellants left service as World War II stocks were expended after the war. For small arms it has been replaced by other propellants, such as the Improved Military Rifle (IMR) line of extruded powder or the WC844 ball propellant currently in use in the 5.56×45mm NATO. [3] Production ceased in the United Kingdom around the end of the 20th century, with the closure of the last of the World War II cordite factories, ROF Bishopton. Triple-base propellant for UK service (for example, the 105 mm L118 Light Gun) is now manufactured in Germany.

Adoption of smokeless powder by the British government

Replacements for gunpowder (black powder)

Gunpowder, an explosive mixture of sulfur, charcoal and potassium nitrate (also known as saltpeter), was the original propellant employed in firearms and fireworks. It was used from about the 10th or 11th century onward, but it had disadvantages, including the large amount of smoke it produced. With the 19th-century development of various "nitro explosives", based on the reaction of nitric acid mixtures on materials such as cellulose and glycerin, a search began for a replacement for gunpowder. [4]

Early European smokeless powders

The first smokeless powder was developed in 1865 by Johann Edward Schultze. At the time of this breakthrough, Schultze was a captain of Prussian artillery. Schultze eventually rose to the rank of colonel. His formulation (dubbed Schultze Powder) was composed of nitrolignose derived from nitrated wood grains, impregnated with saltpetre or barium nitrate. [5] [6] [7]

In 1882, the Explosive Company of Stowmarket introduced EC Powder, which contained nitro-cotton and nitrates of potassium and barium in a grain gelatinised by ether alcohol. It had coarser grains than other nitrocellulose powders. It proved unsuitable for rifles, but it remained in long use for shotguns [8] and was later used for grenades and fragmentation bombs. [9]

In 1884, the French chemist Paul Vieille produced a smokeless propellant that had some success. It was made out of collodion (nitrocellulose dissolved in ethanol and ether), resulting in a plastic colloidal substance which was rolled into very thin sheets, then dried and cut up into small flakes. It was immediately adopted by the French military for their Mle 1886 infantry rifle and called Poudre B (for poudre blanche, or white powder) to distinguish it from black powder (gunpowder). The rifle and the cartridge developed to use this powder were known generically as the 8mm Lebel, after the officer who developed its 8 mm full metal jacket bullet. [10]

The following year, 1887, Alfred Nobel invented and patented a smokeless propellant he called Ballistite . [11] It was composed of 10% camphor, 45% nitroglycerine and 45% collodion (nitrocellulose). Over time the camphor tended to evaporate, leaving an unstable explosive. [12]

Development

Sir James Dewar at work Heike Kamerlingh Onnes - 33 - James Dewar in the Royal Institution in London, around 1900.png
Sir James Dewar at work

A United Kingdom government committee, known as the "Explosives Committee", chaired by Sir Frederick Abel, monitored foreign developments in explosives and obtained samples of Poudre B and Ballistite; neither of these smokeless powders was recommended for adoption by the Explosives Committee.[ citation needed ]

Abel, Sir James Dewar and W Kellner, who was also on the committee, developed and jointly patented (Nos 5,614 and 11,664 in the names of Abel and Dewar) in 1889 a new ballistite-like propellant in 1889. It consists of (by weight) 58% nitroglycerin, 37% guncotton (nitrocellulose) and 5% petroleum jelly. Using acetone as a solvent, it was extruded as spaghetti-like rods initially called "cord powder" or "the Committee's modification of Ballistite", but this was swiftly abbreviated to "Cordite".[ citation needed ]

Cordite began as a double-base propellant. In the 1930s, triple-base was developed by including a substantial proportion of nitroguanidine. Triple-base propellant reduced the disadvantages of double-base propellant – its relatively high temperature and significant flash. Imperial Chemical Industries's (ICI) World War II double-base AN formulation also had a much lower temperature, but it lacked the flash reduction properties of N and NQ triple-base propellants.[ citation needed ]

Whilst cordite is classified as an explosive, it is not employed as a high explosive. It is designed to deflagrate, or burn, to produce high pressure gases.[ citation needed ]

Nobel and Abel patent dispute

Alfred Nobel sued Abel and Dewar over an alleged patent infringement. His patent specified that the nitrocellulose should be "of the well-known soluble kind". After losing the case, it went to the Court of Appeal. This dispute eventually reached the House of Lords, in 1895, but it was finally lost because the words "of the well-known soluble kind" in his patent were taken to mean the soluble collodion, and hence specifically excluded the insoluble guncotton. [13] The ambiguous phrase was "soluble nitro-cellulose": soluble nitro-cellulose was known as Collodion and was soluble in alcohol. It was employed mainly for medical and photographic use. In contrast, insoluble in alcohol, nitrocellulose was known as gun cotton and was used as an explosive. [13] [14] Nobel's patent refers to the production of Celluloid using camphor and soluble nitrocellulose; and this was taken to imply that Nobel was specifically distinguishing between the use of soluble and insoluble nitrocellulose. [14] For a forensic analysis of the case, see The History of Explosives Vol II; The Case for Cordite, John Williams (2014). However, in her comprehensive 2019 biography of Alfred Nobel [15] Ingrid Carlberg notes how closely Abel and Dewar were allowed to follow Nobel's work in Paris, and how disappointed Nobel was with how this trust was betrayed. The book argues for Nobel as the original inventor and that the case was lost because of an unimportant technicality.

Formulations

It was quickly discovered that the rate of burning could be varied by altering the surface area of the cordite. Narrow rods were used in small-arms and were relatively fast burning, while thicker rods would burn more slowly and were used for longer barrels, such as those used in artillery and naval guns.[ citation needed ]

Cordite (Mk I) and Cordite MD

The original Abel-Dewar formulation was soon superseded, as it caused excessive gun barrel erosion. It has since become known as Cordite Mk I.[ citation needed ]

The composition of cordite was changed to 65% guncotton, 30% nitroglycerin (keeping 5% petroleum jelly), and 0.8% acetone shortly after the end of the Second Boer War. This was known as Cordite MD (modified). [16]

Cordite MD cartridges typically weighed approximately 15% more than the cordite Mk I cartridges they replaced, to achieve the same muzzle velocity, due to the inherently less powerful nature of Cordite MD. [17]

Cordite RDB

During World War I, acetone was in short supply in Great Britain, and a new experimental form was developed for use by the Royal Navy. [18] This was Cordite RDB (= Research Department formula B); which was 52% collodion, 42% nitroglycerin and 6% petroleum jelly. It was produced at HM Factory, Gretna; [18] and the Royal Navy Cordite Factory, Holton Heath.[ citation needed ]

Acetone for the cordite industry during late World War I was eventually produced through the efforts of Dr. Chaim Weizmann, considered to be the father of industrial fermentation. While a lecturer at Manchester University Weizmann discovered how to use bacterial fermentation to produce large quantities of many desired substances. He used the bacterium Clostridium acetobutylicum (the so-called Weizmann organism) to produce acetone. Weizmann transferred the rights to the manufacture of acetone to the Commercial Solvents Corporation in exchange for royalties. After the Shell Crisis of 1915 during World War I, he was director of the British Admiralty Laboratories from 1916 until 1919.[ citation needed ]

Cordite RDB was later found to become unstable if stored too long.[ citation needed ]

Cordite SC

Research on solvent-free Cordite RDB technologically extremely similar to ballistite continued primarily on the addition of stabilizers, which was based on German RP C/12 propellant featuring significant amounts of centralite (Called "carbamite" in British parlance) and led to the type commonly used in World War II as the main naval propellant. In Great Britain this was known as Cordite SC (= Solventless Cordite), and it required production facilities separate from classical cordite.

Cordite SC was produced in different shapes and sizes, so the particular geometry of Cordite SC was indicated by the use of letters or numbers, or both, after the SC. For example, SC followed by a number was rod-shaped cord, with the number representing the diameter in thousandths of an inch. "SC T" followed by two sets of numbers indicated tubular propellant, with the numbers representing the two diameters in thousandths.[ citation needed ]

Two-inch (approximately 50 mm) and three-inch (approximately 75 mm) diameter, rocket Cordite SC charges were developed in great secrecy before World War II for anti-aircraft purposes—the so-called Z batteries, using 'Unrotated Projectiles'. [1]

Great Britain changed to metric units in the 1960s, so there was a discontinuity in the propellant geometry numbering system.[ citation needed ]

Cordite N

An important development during World War II was the addition of another explosive, nitroguanidine, to the mixture to form triple-base propellant or Cordite N and NQ. The formulations were slightly different for artillery and naval use. This solved two problems associated with the large naval guns fitted to British Navy's capital ships: gun flash and muzzle erosion. Nitroguanidine produces large amounts of nitrogen when heated, which had the benefit of reducing the muzzle flash, and its lower burning temperature greatly reduced the erosion of the gun barrel.[ citation needed ]

N and NQ were also issued in limited amounts to ammunitions used by the British 25-pdr and 5.5-inch land-based artillery pieces.[ citation needed ]

After World War II production of double-base propellants generally ended. Triple-base propellants, N and NQ, were the only ones used in new ammunition designs, such as the cartridges for 105 mm Field and for 155 mm FH70.[ citation needed ]

Charge design

Manufacture

UK Government factories

In Great Britain, cordite was developed for military use at the Royal Arsenal by Abel, Dewar and Kellner, Woolwich, [19] and produced at the Waltham Abbey Royal Gunpowder Mills from 1889 onwards. [20]

At the start of World War I, cordite was in production at Waltham Abbey Royal Gunpowder Mills and by seven other suppliers (British Explosives Syndicate Ltd, Chilworth Gunpowder Company Ltd, Cotton Powder Company Ltd, Messrs Curtis's and Harvey Ltd, National Explosives Company Ltd, New Explosives Company Ltd and Nobels Explosive Company Ltd). [21] Existing factories were expanded and new ones built, notably by Nobel's at Ardeer, HM Factory, Gretna, which straddled the Scotland-England border at Gretna, and the Royal Navy Cordite Factory, Holton Heath. A factory was also established by the Indian Government at Nilgris. Both the Gretna and the Holton Heath cordite factories closed at the end of World War I.[ citation needed ]

By the start of World War II, Holton Heath had reopened, and an additional factory for the Royal Navy, The Royal Navy Propellant Factory, Caerwent, opened at Caerwent in Wales. A very large Royal Ordnance Factory, ROF Bishopton, was opened in Scotland to manufacture cordite for the British Army and the Royal Air Force. A new cordite factory at Waltham Abbey and two additional ROF's—ROF Ranskill and ROF Wrexham—were also opened. Cordite produced in these factories was sent to filling factories for filling into ammunition.[ citation needed ]

MoS Agency Factories and ICI Nobel in World War II

The British Government set up additional cordite factories, not under Royal Ordnance Factory control but as Agency Factories run on behalf of the Ministry of Supply (MoS). The company of ICI Nobel, at Ardeer, was asked in 1939 to construct and operate six factories in southern Scotland. Four of these six were involved in cordite or firearm-propellant manufacture. The works at MoS Drungans (Dumfries) produced guncotton that was converted to cordite at MoS Dalbeattie (triple-base cordite) and at MoS Powfoot (monobase granulated guncotton for small-arms). A smaller site at Girvan, South Ayrshire, now occupied by Grant's distillery, produced cordite and TNT. [22] The ICI Ardeer site also had a mothballed World War I Government-owned cordite factory. [23]

35% of British cordite produced between 1942 and 1945 came from Ardeer and these agency factories. [24] ICI ran a similar works at Deer Park (which was also confusingly known as Ardeer after the adjacent suburb) near Melbourne in Australia and in South Africa. [24]

Overseas supplies

Additional sources of propellant were also sought from the British Commonwealth in both World War I and World War II. Canada, South Africa, and Australia had ICI-owned factories that, in particular, supplied large quantities of cordite.[ citation needed ]

World War I

Bird's-eye view of a portion of Canadian Explosives Ltd., Nobel, Ontario Bird's-eye view of a portion of Canadian Explosives Ltd., Nobel, Ontario - Vue a vol d'oiseau d'une partie de l'entreprise Canadian Explosives Ltd., Nobel (Ontario) (39057463364).jpg
Bird's-eye view of a portion of Canadian Explosives Ltd., Nobel, Ontario

Canadian Explosives Limited was formed in 1910 to produce rifle cordite, at its Beloeil factory, for the Quebec Arsenal. By November 1915 production had been expanded to produce 350,000 lb (159,000 kg) of cordite per month for the Imperial Munitions Board. [25]

The Imperial Munitions Board set up a number of additional explosives factories in Canada. It built The British Cordite Ltd factory at Nobel, Ontario, in 1916/1917, to produce cordite. Production started in mid-1917. [25]

Canadian Explosives Limited built an additional cordite factory at Nobel, Ontario. Work started in February 1918 and was finished on 24 August 1918. It was designed to produce 1,500,000 lb (681,000 kg) of cordite per month. [25]

Factories, specifically "heavy industry" (Long, and Marland 2009) were important for the provision of munitions. Cordite factories typically employed women (Cook 2006) who put their lives at risk as they packed the shells.[ citation needed ]

Production quantities

Large quantities of cordite were manufactured in both World Wars for use by the military. [26]

Pre-World War I

Prior to World War I, most of the cordite used by the British Government was produced in its own factories. Immediately prior to World War I, between 6,000 and 8,000 tons per year of cordite were produced in the United Kingdom by private manufacturers; between 1,000 and 1,500 tons per year were made by Nobel's Explosives, at Ardeer. [23] However, private industry had the capability to produce about 10,000 tons per year, with Ardeer able to produce some 3,000 tons of this total. [23]

World War I

At the start of World War I, private industry in the UK was asked to produce 16,000 tons of cordite, and all the companies started to expand. [23] HM Factory, Gretna, the largest propellant factory in the United Kingdom, which opened in 1916, was by 1917 producing 800 tons (812 tonne) of Cordite RDB per week (approximately 41,600 tons per year). [18] [23] The Royal Navy had its own factory at Holton Heath. [27]

In 1910, Canadian Explosives Limited produced 3,000 lb (1,362 kg) of rifle cordite per month at its Beloeil factory, for the Quebec Arsenal. By November 1915 production had been expanded to 350,000 lb (159,000 kg) of cordite per month (approximately 1,900 tonnes per year). [25] The Canadian Explosives Limited cordite factory at Nobel, Ontario, was designed to produce 1,500,000 lb (681 tonne) of cordite per month (approximately 8,170 tonnes per year).[ citation needed ]

Between wars

HM Factory, Gretna, and the Royal Navy Cordite Factory, Holton Heath, both closed after the end of the war and the Gretna factory was dismantled. [18] This left the Waltham Abbey and Ardeer factories in production.[ citation needed ]

MV Cordite, Royal Military College of Canada MV Cordite, Royal Military College of Canada.jpg
MV Cordite, Royal Military College of Canada

World War II

As noted above, in addition to its own facilities, the British Government had ICI Nobel set up a number of Agency Factories producing cordite in Scotland, Australia, Canada and South Africa.[ citation needed ]

Citations

  1. 1 2 Brown 1999 , Chapter 17
  2. Coster-Mullen, John (2012). Atom Bombs: The Top Secret Inside Story of Little Boy and Fat Man. Waukesha, WI: J. Coster-Mullen. OCLC 298514167.
  3. Watters, Daniel, "The Great Propellant Controversy", The Gun Zone, archived from the original on 22 July 2013, retrieved 30 November 2009
  4. Tucker, Spencer C. (2013). Almanac of American Military History. Santa Barbara, CA: ABC-CLIO. p. 1170. ISBN   9781598845303.
  5. "The Schultz White Gunpowder". Scientific American. 22 May 1869. Retrieved 17 April 2022.
  6. "Schultze powder – Big Chemical Encyclopedia". chempedia.info. Retrieved 17 April 2022.
  7. "No text – Big Chemical Encyclopedia". chempedia.info. Retrieved 17 April 2022.
  8. Hogg OFG, 'Artillery: Its Origin, Heyday and Decline', Hurst & Company, London, 1989
  9. http://www.aeragon.com/o/me/ni.html#ecpowder Archived 26 November 2022 at the Wayback Machine Aeragon Site Index > Ordnance > Military Explosives > Nitrocellulose > EC Powder
  10. Bergman, Yoel (2009). "Paul Vieille, Cordite & Ballistite". Icon. 15: 40–60. ISSN   1361-8113. JSTOR   23787093.
  11. Bergman, Yoel (20 October 2017). "Fair Chance and not a Blunt Refusal: New Understandings on Nobel, France, and Ballistite in 1889". Vulcan. 5 (1): 29–41. doi: 10.1163/22134603-00501003 . ISSN   2213-4603.
  12. Bergman, Yoel (2011). "Alfred Nobel, Aniline and Diphenylamine". Icon. 17: 57–67. ISSN   1361-8113. JSTOR   23789960.
  13. 1 2 Schuck & Sohlman 1929 , pp. 136–144
  14. 1 2 Schuck & Sohlman 1929 , Appendix I: Alfred Nobel's English lawsuit. Mr justice Romer's judgment in the "Cordite Case"
  15. Carlberg, Ingrid (2019). Nobel: Den gåtfulle Alfred, hans värld och hans pris (in Swedish). Stockholm: Norstedts. ISBN   978-91-1-306939-5.
  16. Britannica, The Editors of Encyclopaedia. "cordite". Encyclopedia Britannica, 13 Apr. 2017, https://www.britannica.com/technology/cordite Archived 29 December 2021 at the Wayback Machine . Accessed 29 December 2021.
  17. Example : BL 6-inch Mk VII gun : 20 lb cordite Mk I, 23 lb cordite MD. Table 8 in Treatise on Ammunition 1915.
  18. 1 2 3 4 Ministry of Munitions of War
  19. Zukas (2002)
  20. Hogg (1970)
  21. Ministry of Munitions (1922)
  22. Cocroft 2000 , Gazetteer
  23. 1 2 3 4 5 Reader 1975 , Chapter 14: "Warlike Supply"
  24. 1 2 Reader 1975 , Chapter 15: "War Production"
  25. 1 2 3 4 Carnegie (1925).
  26. Neushul, Peter (1989). "Seaweed for War: California's World War I Kelp Industry". Technology and Culture. 30 (3): 561–583. doi:10.2307/3105951. ISSN   0040-165X. JSTOR   3105951. S2CID   111835074.
  27. "Royal Naval Cordite Factory at Holton Heath, Wareham St. Martin – Dorset (UA) | Historic England". historicengland.org.uk. Retrieved 12 April 2022.

Bibliography

Related Research Articles

<span class="mw-page-title-main">Frederick Abel</span> English chemist (1827–1902)

Sir Frederick Augustus Abel, 1st Baronet was an English chemist who was recognised as the leading British authority on explosives. He is best known for the invention of cordite as a replacement for gunpowder in firearms.

<span class="mw-page-title-main">Gunpowder</span> Explosive once used in firearms

Gunpowder, also commonly known as black powder to distinguish it from modern smokeless powder, is the earliest known chemical explosive. It consists of a mixture of sulfur, charcoal, and potassium nitrate (saltpeter). The sulfur and charcoal act as fuels while the saltpeter is an oxidizer. Gunpowder has been widely used as a propellant in firearms, artillery, rocketry, and pyrotechnics, including use as a blasting agent for explosives in quarrying, mining, building pipelines, tunnels, and roads.

<span class="mw-page-title-main">Nitroglycerin</span> Chemical compound

Nitroglycerin (NG), also known as trinitroglycerol (TNG), nitro, glyceryl trinitrate (GTN), or 1,2,3-trinitroxypropane, is a dense, colorless or pale yellow, oily, explosive liquid most commonly produced by nitrating glycerol with white fuming nitric acid under conditions appropriate to the formation of the nitric acid ester. Chemically, the substance is a nitrate ester rather than a nitro compound, but the traditional name is retained. Discovered in 1846 by Ascanio Sobrero, nitroglycerin has been used as an active ingredient in the manufacture of explosives, namely dynamite, and as such it is employed in the construction, demolition, and mining industries. It is combined with nitrocellulose to form double-based smokeless powder, used as a propellant in artillery and firearms since the 1880s.

<span class="mw-page-title-main">Nitrocellulose</span> Highly flammable compound

Nitrocellulose is a highly flammable compound formed by nitrating cellulose through exposure to a mixture of nitric acid and sulfuric acid. One of its first major uses was as guncotton, a replacement for gunpowder as propellant in firearms. It was also used to replace gunpowder as a low-order explosive in mining and other applications. In the form of collodion it was also a critical component in an early photographic emulsion, the use of which revolutionized photography in the 1860s. In the 20th century it was adapted to automobile lacquer and adhesives.

<span class="mw-page-title-main">Shell (projectile)</span> Payload-carrying projectile

A shell, in a modern military context, is a projectile whose payload contains an explosive, incendiary, or other chemical filling. Originally it was called a bombshell, contrasting with solid shells used for early rifled artillery, but "shell" has come to be unambiguous in a military context. A shell can hold a tracer.

<span class="mw-page-title-main">Smokeless powder</span> Type of propellant

Smokeless powder is a type of propellant used in firearms and artillery that produces less smoke and less fouling when fired compared to black powder. Because of their similar use, both the original black powder formulation and the smokeless propellant which replaced it are commonly described as gunpowder. The combustion products of smokeless powder are mainly gaseous, compared to around 55% solid products for black powder. In addition, smokeless powder does not leave the thick, heavy fouling of hygroscopic material associated with black powder that causes rusting of the barrel.

<span class="mw-page-title-main">.303 British</span> British military rifle cartridge

The .303 British or 7.7×56mmR, is a .303-inch (7.7 mm) calibre rimmed tapered rifle cartridge. The .303 inch bore diameter is measured between rifling lands as is the common practice in Europe which follows the traditional black powder convention.

Ballistite is a smokeless propellant made from two high explosives, nitrocellulose and nitroglycerine. It was developed and patented by Alfred Nobel in the late 19th century.

Poudre B was the first practical smokeless gunpowder created in 1884. It was perfected between 1882 and 1884 at "Laboratoire Central des Poudres et Salpêtres" in Paris, France. Originally called "Poudre V" from the name of the inventor, Paul Vieille, it was arbitrarily renamed "Poudre B" to distract German espionage. "Poudre B" is made from 68.2% insoluble nitrocellulose, 29.8% soluble nitrocellulose gelatinized with ether and 2% paraffin. "Poudre B" is made up of very small paper-thin flakes that are not white but dark greenish grey in colour. "Poudre B" was first used to load the 8mm Lebel cartridges issued in 1886 for the Lebel rifle.

An explosive ROF was a UK government-owned Royal Ordnance Factory (ROF), which specialised in manufacturing explosives during and after World War II. In World War I, the name used in the UK for government-owned explosives factories was National Explosives Factory; the cordite factory at Gretna was known as HM Factory, Gretna.

<span class="mw-page-title-main">Royal Naval Cordite Factory, Holton Heath</span>

The Royal Naval Cordite Factory, Holton Heath (RNCF) was set up at Holton Heath, Dorset, England, in World War I to manufacture cordite for the Royal Navy. It was reactivated in World War II to manufacture gun propellants for the Admiralty and its output was supplemented by the Royal Navy Propellant Factory, Caerwent. After the end of World War II, the explosive manufacturing areas of the site were closed down and some areas of the site reopened as the Admiralty Materials Laboratory. A major part of the explosives site became a nature reserve in 1981. Other parts of the site were converted into an industrial estate, and some may be used for housing.

Brown powder or prismatic powder, sometimes referred as "cocoa powder" due to its color, was a propellant used in large artillery and ship's guns from the 1870s to the 1890s. While similar to black powder, it was chemically formulated and formed hydraulically into a specific grain shape to provide slower burn rates with neutral or progressive burning, as opposed to the faster and regressive burn typical of randomly shaped grains of black powder produced by crushing and screening powder formed into sheets in a press box, as was typical for cannon powder previously.

<span class="mw-page-title-main">Waltham Abbey Royal Gunpowder Mills</span> Former industrial site in Waltham Abbey, England

The Royal Gunpowder Mills are a former industrial site in Waltham Abbey, England. It was one of three Royal Gunpowder Mills in the United Kingdom. Waltham Abbey is the only site to have survived virtually intact.

<span class="mw-page-title-main">HM Factory, Gretna</span> Cordite Production Plant in Gretna, Scotland, during the First World War

H.M. Factory, Gretna was Britain's largest cordite factory during the First World War. The government-owned facility was adjacent to the Solway Firth, near Gretna, Dumfries and Galloway. It was built by the Ministry of Munitions in response to the Shell Crisis of 1915. The capital cost was £9,184,000 and it covered 9,000 acres (36 km2). The cost of working it from September 1916 to September 1918 was £12,769,000, during which time it produced cordite valued at £15,000,000, though it was claimed that without it the cordite would have had to be imported from the USA at a cost of £23,600,000.

Nobel Enterprises is a chemicals business that used to be based at Ardeer, in the Ayrshire town of Stevenston, in Scotland. Specialising in nitrogen-based propellants and explosives and nitrocellulose-based products such as varnishes and inks. It was formerly ICI Nobel, a division of the chemicals group ICI, but was then sold to Inabata, a Japanese trading firm. The business was sold on to Chemring Group in 2005 and is now a Scottish Company, part of Chemring Group. Stefan Donald is currently the lead engineer for the ongoing regeneration project.

Barwick, Great Barwick, and Little Barwick are hamlets in the civil parish of Standon in Hertfordshire, England. They are near the A10 road and the village of Much Hadham and the hamlet of Latchford. The River Rib flows behind Barwick and through Great Barwick. There is a ford crossing at Great Barwick.

<span class="mw-page-title-main">Trimethylolethane trinitrate</span> Chemical compound

Trimethylolethane trinitrate (TMETN), also known as metriol trinitrate or nitropentaglycerin, is a nitrate ester. It is a high explosive similar to nitroglycerin. It is a transparent oily liquid, colorless to light brown. It is odorless. It is used in some solid propellants and smokeless powders as a plasticizer. Its chemical formula is CH3−C(CH2−O−NO2)3.

<span class="mw-page-title-main">Firearm propellant</span> Type of propellant

Firearm propellants are a specialized type of propellant used to discharge a projectile through the barrel of a firearm. Mixtures of different chemical substances are often used to control the rate of gas release, or prevent decomposition of the propellant prior to use. Short-barrel firearms such as handguns necessitate faster-burning propellants to obtain sufficient muzzle energy, while long guns typically use slower-burning propellants. The pressure relationships between propellant chemical reactions and bullet response are described as internal ballistics.

<span class="mw-page-title-main">Defence Explosive Factory Maribyrnong</span> Historic site in Victoria, Australia

Defence Explosive Factory Maribyrnong is a heritage-listed military installation and former munitions factory at Cordite Avenue, Maribyrnong, Victoria, Australia. It was added to the Australian Commonwealth Heritage List on 22 June 2004.

<span class="mw-page-title-main">Stowmarket Guncotton Company</span> Defunct English explosives manufacturing company (1863–1907)

The Stowmarket Guncotton Company was an explosives company established in the 19th century by Messrs Prentice that operated a gun-cotton factory in Stowmarket, Suffolk, England. The factory was the scene of an explosion in 1871 that claimed the lives of 28 people.