Company type | Private |
---|---|
Industry | Aircraft ejection systems |
Founded | 1934 |
Founder | Sir James Martin Valentine Baker |
Headquarters | Denham, Buckinghamshire, England |
Website | martin-baker |
Martin-Baker Aircraft Company Limited is a British manufacturer of ejection seats and safety-related equipment for aviation. The company was originally an aircraft manufacturer before becoming a pioneer in the field of ejection seats. The company's headquarters are in Higher Denham, Buckinghamshire, England, with other sites in France, Italy and the United States. [1]
Martin-Baker supplies ejection seats for 93 air forces worldwide. [2] Martin-Baker seats have been fitted into over 200 fixed-wing and rotary types with the most recent being the Lockheed Martin F-35 Lightning II programme.
Martin-Baker claimed in 2022 that since the first live ejection test in 1945, [3] a total of 7,732 lives have been saved by the company's ejection seats. [4]
Martin-Baker also manufactures what it calls "crashworthy" seats for helicopters and fixed-wing aircraft. As of 2012 [update] , over 20,000 crashworthy seats have been delivered. The Martin-Baker company continues as a family-run business, run by the twin sons of the late Sir James Martin since Autumn 1979. [2]
The factory for building aircraft was established in 1929 by James Martin [5] [6] and "Martin's Aircraft Works" was founded at Denham by James Martin and Captain Valentine Baker with financial help from Francis Francis. The company was building a prototype aircraft, the MB 1, using the design patents for aircraft structures held by Martin. On 17 August 1934, the Martin-Baker Aircraft Company was formed to continue the work of aircraft development. [7]
Martin and Baker designed an unconventional, two-seat, low-wing monoplane design in the early 1930s as the MB 1. This was powered by a de Havilland Gipsy engine mounted in the fuselage behind the seats and driving a fixed pitch propeller through a shaft running horizontally between the pilot and passenger. The project was abandoned due to financial constraints, although the fuselage and engine installation had been completed. Martin-Baker also constructed an autogyro designed by Raoul Hafner. This, their first complete aircraft project, was later tested by Captain Baker at Heston Aerodrome. [8]
In 1935, Martin and Baker designed and flew their Martin-Baker MB 1, a two-seat light touring aircraft. Their first military design was the Martin-Baker MB 2, a Napier Dagger–powered fighter that flew in 1938. [9] It was a private venture to meet Air Ministry Specification F.5/34 for a fighter for service in the tropics. The MB 2 was tested but neither it nor other designs to F.5/34 were adopted. [10]
The Martin-Baker MB 5 which first flew in 1944 had started out as the second MB 3 prototype but was extensively redesigned with a tubular steel fuselage. It used the Griffon engine driving contra-rotating propellers. [11] [12]
Martin-Baker manufactured aircraft components, including retrofit improvements to the ammunition belt feeds for the Hispano Mk II autocannon and armoured seats for Supermarine Spitfires, throughout the Second World War. James Martin also designed and manufactured explosive bolt cutters fitted to bomber wings to cut barrage balloon cables that were fitted to many aircraft and saved a number of aircraft.
In 1944, the company was approached by the Ministry of Aircraft Production to investigate ejection systems enabling pilots to bail out safely from high-speed fighter aircraft.
Martin-Baker investigated ejection seats from 1934 onwards, several years before Germany and Sweden proposed similar systems in 1938. The company concluded that an explosive-powered ejection seat was the best solution. In particular, Baker's death in 1942 during a test flight of the MB 3 affected Martin so much that pilot safety became his primary focus and led to the later reorganisation of the company to focus primarily on ejection seats. [13]
In 1944, James Martin was asked by the Ministry of Aircraft Production to develop methods for fighter pilots to escape their aircraft. [7] Martin decided that the best method involved ejection of the seat with the occupant sitting in it, aided by an explosive charge. After ejection, the pilot would separate from the seat and open his parachute by pulling a ripcord in the usual way.
At that time there was little information on how much upward thrust the human body could withstand. Data relating to "g" forces in catapult launching of aircraft involved horizontal thrust and was therefore inapplicable to the new problem. Tests would have to be conducted to find out how much upward "g" force a person could tolerate. These were done by shooting a seat up a near-vertical path, loading the seat to represent the weight of the occupant, and measuring the accelerations involved.
A 16 ft (4.9 m) test rig was built in the form of a tripod, one of the legs being in the form of guide rails. The seat was propelled up the guide rails by a gun, consisting of two telescopic tubes energised by an explosive cartridge. The guide rails were provided with ratchet stops every 3 in (76 mm) so that the seat was automatically arrested at the top of its travel. [14]
Studies were conducted to find the limits of upward acceleration that the human body could stand. The first dummy shot with the seat loaded to 200 lb (91 kg) was made on 20 January 1945, and four days later one of the company's experimental fitters, Bernard Lynch, undertook the first "live" ride, being shot up the rig to a height of 4 ft 8 in (1.42 m). In three further tests, the power of the cartridge was progressively increased until a height of 10 feet was reached, at which stage Lynch reported the onset of considerable physical discomfort. The first seat was successfully live-tested by Lynch on 24 July 1946, who ejected from a Gloster Meteor travelling at 320 mph (510 km/h) IAS at 8,000 feet (2,400 m) over Chalgrove Airfield in Oxfordshire. [15]
The first production Martin-Baker ejection seat, a 'Pre-Mk 1', was installed in the Saunders-Roe SR.A/1 prototype.
The first use of an ejection seat in a practical application by a British pilot involved the Armstrong Whitworth A.W.52 flying wing experimental aircraft in May 1949.
Martin-Baker was a pioneer in expanding the operational envelope of the ejection seat to enable it to be used at low altitudes and airspeeds, leading eventually to development of the "zero-zero" capability in 1961. [16]
This section needs additional citations for verification .(May 2021) |
Martin-Baker Mk.1
Martin-Baker Mk.2
Martin-Baker Mk.3
Martin-Baker Mk.4
Martin-Baker Mk.5
Martin-Baker Mk.6
Martin-Baker Mk.7
Martin-Baker Mk.8
Martin-Baker Mk.9
Martin-Baker Mk.10
Martin-Baker Mk.11
Martin-Baker Mk.12
Martin-Baker Mk.14 NACES (SJU-17)
This ejection seat is used by the US Navy and is often designated Martin-Baker NACES (Naval Aircrew Ejection Seat) SJU-17 with a suffix letter for the different variants. [17]
Martin-Baker Mk.15
Martin-Baker Mk.16
Martin-Baker Mk.17
Extremely compact and lightweight ejection seat designed with minimise mass and maintenance. Most lightweight ejection seat in Martin-Baker inventory.
Martin-Baker Mk.18
The Martin-Baker company uses its own airfield, Chalgrove Airfield, in Oxfordshire for operational testing of ejection seats. In 2016, ejection tests were carried out at Cazaux Air Base; the company's Meteor aircraft testbeds were flown from Chalgrove to France for them. [20]
Two Gloster Meteor T.7 aircraft, WL419 and WA638, remain in service with the company as flying testbeds. Another Meteor (WA634), used in early development of ejection seats, is retained at the RAF Museum at RAF Cosford.
Martin-Baker also sponsors an "Ejection Tie Club", producing a tie, patch, certificate, tie pin and membership card for those whose lives have been saved by a Martin-Baker ejection seat. The company also partnered with Bremont to produce a limited-edition wristwatch for members of the club. [21] The watch must be purchased privately, though Martin-Baker does subsidize its cost. [22] As of 2019 [update] , there are now over 6,000 registered members of the club since it was founded in 1957. [23]
In 2011, Red Arrows pilot Flt. Lt. Sean Cunningham was ejected from his Hawk T1 jet on the ground at RAF Scampton. The parachute failed to deploy and Cunningham was killed. On 22 January 2018, company director John Martin entered a guilty plea to breaching Section 3(1) of the Health and Safety at Work Act 1974 on behalf of Martin-Baker wherein he admitted that the company had been aware of a technical problem with the ejector seat since 1990, but failed to notify the RAF. [24] [25] The firm admitted the health and safety breach on the basis it had failed to provide a written warning to the RAF about over-tightening a bolt on the aircraft. [26]
The Gloster Meteor was the first British jet fighter and the Allies' only jet aircraft to engage in combat operations during the Second World War. The Meteor's development was heavily reliant on its ground-breaking turbojet engines, pioneered by Frank Whittle and his company, Power Jets Ltd. Development of the aircraft began in 1940, although work on the engines had been under way since 1936.
Number 17 Squadron, currently No. 17 Test and Evaluation Squadron (TES), is a squadron of the Royal Air Force. It was reformed on 12 April 2013 at Edwards Air Force Base, California, as the Operational Evaluation Unit (OEU) for the Lockheed Martin F-35B Lightning.
Number 43 Squadron, nicknamed the Fighting Cocks, was a Royal Air Force aircraft squadron originally formed in April 1916 as part of the Royal Flying Corps. It saw distinguished service during two world wars, producing numerous "aces". The squadron last operated the Panavia Tornado F3 from RAF Leuchars, Scotland, in the air defence role, until it was disbanded in July 2009.
Number 111 (Fighter) Squadron, also known as No. CXI (F) Squadron and nicknamed Treble One, was a squadron of the Royal Air Force. It was formed in 1917 in the Middle East as No. 111 Squadron of the Royal Flying Corps during the reorganisation of the Egyptian Expeditionary Force after General Edmund Allenby took command during the Sinai and Palestine Campaign. The squadron remained in the Middle East after the end of the First World War until 1920 when it was renumbered as No. 14 Squadron.
The HS.404 is an autocannon originally designed by and produced by the Swiss arm of the Spanish/Swiss company Hispano-Suiza in the mid-1930s. Production was later moved to the French arm of Hispano-Suiza.
The Gloster Aircraft Company was a British aircraft manufacturer from 1917 to 1963.
No. 74 Squadron, also known as 'Tiger Squadron' from its tiger-head motif, was a squadron of the Royal Air Force (RAF). It operated fighter aircraft from 1917 to the 1990s, and then trainer aircraft until its disbandment in 2000. It was the Royal Air Force's member of the NATO Tiger Association from 1961 until the squadron's disbandment, it has since been replaced by No. 230 Squadron.
Number 56 Squadron, also known as No. 56 Test and Evaluation Squadron (TES), nicknamed the Firebirds for their ability to always reappear intact regardless of the odds, is one of the oldest and most successful squadrons of the Royal Air Force, with battle honours from many of the significant air campaigns of both the First and Second World Wars.
Number 92 Squadron, also known as No. 92 Squadron and currently as No. 92 Tactics and Training Squadron, of the Royal Air Force is a test and evaluation squadron based at RAF Waddington, Lincolnshire. It was formed as part of the Royal Flying Corps at London Colney as a fighter squadron on 1 September 1917. It deployed to France in July 1918 and saw action for just four months, until the end of the war. During the conflict it flew both air superiority and direct ground support missions. It was disbanded at Eil on 7 August 1919. Reformed on 10 October 1939,at Tangmere Airfield, the unit was supposed to be equipped with medium bombers but in the spring of 1940 it became one of the first RAF units to receive the Supermarine Spitfire, going on to fight in the Battle of Britain.
Chalgrove Airfield is a former Second World War airfield in Oxfordshire, England. It is approximately 3 mi (4.8 km) north-northeast of Benson in the heart of South Oxfordshire between Henley and Oxford; about 42 mi (68 km) north-northwest of London.
RAAF Museum is the official museum of the Royal Australian Air Force located at RAAF Williams Point Cook, Victoria, Australia. The museum displays aircraft of significance to the RAAF from its inception as the Australian Flying Corps to the present.
The Israeli Air Force Museum is located at Hatzerim Airbase in the Negev desert in Israel.
The Martin-Baker Mk.5 is a British ejection seat designed and built by Martin-Baker. Introduced in the late 1950s, the Mk.5 has been installed in combat and training aircraft worldwide.
The Martin-Baker Mk.10 is a British rocket-assisted ejection seat designed and built by Martin-Baker. Introduced in the 1970s, the zero-zero capable Mk.10 has been installed in many combat aircraft types. A lightweight version is known as the Mk.10L.
The Martin-Baker Mk.1 is a British ejection seat designed and built by Martin-Baker. Developed in the late 1940s it was the first in the line of production Martin-Baker seats for military aircraft. Ground and air testing of earlier designs resulted in the first successful test ejection of a company employee in July 1946. A seat type designed for the Saunders-Roe company was known as the Pre-Mk.1.
The Dumfries and Galloway Aviation Museum is a volunteer-operated aviation museum located in and around the World War II-era watch tower at the former RAF Dumfries, located two miles north east of the centre of Dumfries, Scotland, which was in service from June 1940 until 1957, when it closed. The site was sold to a private company in 1960. The museum, founded in 1977 by the Dumfries and Galloway Aviation Group, has a collection of aircraft, both civil and military, aero engines, artifacts, and a small, but "ever expanding collection of memorabilia honouring airborne forces."
787 Naval Air Squadron was a Naval Air Squadron of the Royal Navy's Fleet Air Arm which disbanded in January 1956. It formed in March 1941, at HMS Heron, RNAS Yeovilton, out of 804 Naval Air Squadron as a Fleet Fighter Development Unit. Almost every type of fighter was received by the squadron for testing and evaluation for naval use. A move to RAF Duxford in June 1941 saw it become the Naval Air Fighting Development Unit, attached to the Royal Air Force's Air Fighting Development Unit. The squadron undertook rocket projectile test, continuous development of fighter tactics and even helping Torpedo Bomber Reconnaissance squadrons in evading fighter attack. Post Second World War it continued its trials task and also undertook Rebecca radar trials and ASH, US-built air-to-surface-vessel radar trials.
Sir James Martin, an Irish immigrant and innovative engineer, began producing aircraft in 1929
'Martin's Aircraft Works' was founded by Sir James Martin as an aircraft manufacturer in 1934. The factory was established in 1929