 | |
| Company type | Subsidiary |
|---|---|
| Industry | Aerospace |
| Founded | 1937 as Rotol Airscrews |
| Founders | Rolls-Royce Limited Bristol Aeroplane Company |
| Headquarters | , |
| Parent | GE Aerospace |
| Website | dowty |
Dowty Propellers is a British engineering company based in Brockworth, Gloucestershire that specialises in the manufacture, repair and overhaul of propellers and propeller components for customers around the world. It is owned by GE Aerospace.
The company was formed as Rotol Airscrews in 1937 by Rolls-Royce and Bristol Engines to take over both companies' propeller development, [1] the market being too small to support more than one company. The name is a contraction of "Rolls-Royce" and "Bristol". [1] Rotol's propellers were always considered leading edge, its models equipping the Hawker Hurricane, Supermarine Spitfire, and many other Second World War-era aircraft. [1] By the end of the war it had introduced the first five-bladed propeller to see widespread use, used on late-model Spitfires. In 1943 the company changed its name from Rotol Airscrews Limited to Rotol Limited, and in 1952 it acquired British Messier Limited, a specialist in landing gear and hydraulics.
In 1958, Bristol Aeroplane and Rolls-Royce agreed to sell Rotol and British Messier to the Dowty Group. [2] By 1959 Rotol and British Messier along with Dowty Equipment and Dowty Fuel Systems became part of the new Dowty Aviation Division based at Cheltenham.
In 1968, the company introduced the first fibreglass propellers, which went on to see widespread use. [1] Since then it has migrated to carbon fibre, and remains a leader in propeller design.
Following a series of changes of ownership, the original Dowty Rotol facility at Staverton is now owned by the Safran Group, operating as part of its Messier-Bugatti-Dowty landing gear subsidiary (now known as Safran Landing Systems). Propeller design and manufacture was moved a few hundred metres down the road when the company was split into business units under its Dowty ownership in the early 1990s. On 16 January 2007, Dowty Propellers became part of GE Aviation Systems through GE buying Smiths Group’s aerospace division. [3] [4]
On 5 February 2015, a fire at Dowty's Staverton facility caused severe damage to 80% of the factory building, destroying the main production line. [5] A facility at Vantage Point Business Village in Mitcheldean, Gloucestershire, was selected for the company's interim propeller blade manufacturing. [6] In late 2019, the company began moving its operations to an all-new purpose-built facility at Gloucester Business Park in Brockworth, on part of the site of the former aerodrome used by the Gloster Aircraft Company. [7]
Dowty propellers are used on many turboprop feederliners, including the Bombardier Dash 8 Q400, Saab 340 and Saab 2000, and on turboprop transport aircraft such as later models of the C-130J and Alenia C-27J. Dowty propellers can also be found on LCACs used by the militaries of several countries. The US National Air and Space Museum's Udvar Hazy Center, Virginia, has a Dowty propeller on display.
A turboprop is a turbine engine that drives an aircraft propeller.
MTU Aero Engines AG is a German aircraft engine manufacturer. MTU develops, manufactures and provides service support for military and civil aircraft engines. MTU Aero Engines was formerly known as MTU München.
The Rolls-Royce AE 2100 is a turboprop developed by Allison Engine Company, now part of Rolls-Royce North America. The engine was originally known as the GMA 2100, when Allison was a division of former corporate parent General Motors.
General Electric Company, doing business as GE Aerospace, is an American aircraft engine supplier that is headquartered in Evendale, Ohio, outside Cincinnati. It is the legal successor to the original General Electric Company founded in 1892, which split into three separate companies between November 2021 and April 2024, adopting the trade name GE Aerospace after divesting its healthcare and energy divisions.
Sir George Herbert Dowty was an English inventor and businessman.
Safran Aircraft Engines, previously Snecma or Snecma Moteurs, is a French aerospace engine manufacturer headquartered in Courcouronnes and a subsidiary of Safran. It designs, manufactures and maintains engines for commercial and military aircraft as well as rocket engines for launch vehicles and satellites.
Aircraft equipped with contra-rotating propellers (CRP) coaxial contra-rotating propellers, or high-speed propellers, apply the maximum power of usually a single piston engine or turboprop engine to drive a pair of coaxial propellers in contra-rotation. Two propellers are arranged one behind the other, and power is transferred from the engine via a planetary gear or spur gear transmission. Contra-rotating propellers are also known as counter-rotating propellers, although the term counter-rotating propellers is much more widely used when referring to airscrews on separate non-coaxial shafts turning in opposite directions.
Safran Landing Systems, formerly Messier-Bugatti-Dowty, is the world's largest manufacturer of aircraft landing gear, and is involved in the design, development, manufacture and customer support of all types of aircraft landing gear, wheels and brakes. The company is a wholly owned subsidiary of Safran SA. It is based in Vélizy, France, and was founded in 2011.
Filton Airport or Filton Aerodrome was a private airport in Filton and Patchway, within South Gloucestershire, 4 NM north of Bristol, England.
Staverton is a village between the city of Gloucester and the town of Cheltenham in Gloucestershire, England, in the borough of Tewkesbury. The population taken at the 2011 census was 572.
The Allison T56 is an American single-shaft, modular design military turboprop with a 14-stage axial flow compressor driven by a four-stage turbine. It was originally developed by the Allison Engine Company for the Lockheed C-130 Hercules transport entering production in 1954. It has been a Rolls-Royce product since 1995 when Allison was acquired by Rolls-Royce. The commercial version is designated 501-D. Over 18,000 engines have been produced since 1954, logging over 200 million flying hours.
GE Aviation Systems is an American aerospace engineering, aircraft engine and aircraft parts manufacturer.
The aerospace industry of the United Kingdom is the second-largest national aerospace industry in the world and the largest in Europe by turnover, with a global market share of 17% in 2019. In 2020, the industry employed 116,000 people.
The Flying Start Challenge is a contest run by Aerospace businesses and organisations in the South West of England for local secondary schools which aims to help develop science and engineering skills in young people whilst promoting careers in engineering. The Challenge, which has been running for more than a decade, involves upwards of 500 students from 30+ schools annually.
Europrop International (EPI) GmbH is a consortium set up in 2002 in the form of a company governed by German law, by the four main European aircraft engine manufacturers, MTU Aero Engines, Safran Aircraft Engines, Rolls-Royce and ITP Aero.
Dowty Group was a leading British manufacturer of aircraft equipment. It was listed on the London Stock Exchange and was once a constituent of the FTSE 100 Index. The firm ceased operating as an individual entity following its acquisition by TI Group in 1992.
The Airscrew Company Ltd was a British manufacturing company based in Surrey manufacturing propellers.
Hordern-Richmond was a British aeronautical engineering company that traded between 1937 and c. 1990.
The Jet Age Museum is the trading name of the Gloucestershire Aviation Collection, an all-volunteer, charitable organisation dedicated to the preservation of Gloucestershire's aviation heritage. The aviation museum is located on the north side of Gloucestershire Airport, between Gloucester and Cheltenham. It houses a number of aircraft, aero engines, cockpits and other related exhibits. It is themed on the early development of jet aircraft, in particular the role played by the Gloster Aircraft Company and other local firms such as Dowty Rotol and Smiths Industries. The museum is also the custodian of the Russell Adams photographic archive.
