This article's lead sectionmay be too short to adequately summarize the key points. Please consider expanding the lead to provide an accessible overview of all important aspects of the article.(October 2023)
Ferranti or Ferranti International PLC was a UK electrical engineering and equipment firm that operated for over a century from 1885 until it went bankrupt in 1993. The company was once a constituent of the FTSE 100 Index.
The firm was known for work in the area of power grid systems and defence electronics. In addition, in 1951 Ferranti began selling an early computer, the Ferranti Mark 1. The Belgian subsidiary lives on as Ferranti Computer Systems and as of 1994 is part of the Nijkerk Holding.
History
Beginnings
Ferranti steam generating set, c. 1900
Sebastian Ziani de Ferranti established his first business Ferranti, Thompson and Ince in 1882.[1] The company developed the Ferranti-Thompson Alternator. Ferranti focused on alternating current power distribution early on, and was one of the few UK experts. In 1885 Dr. Ferranti established a new business, with Francis Ince and Charles Sparks as partners, known as S.Z. de Ferranti.[2] According to J.F. Wilson,[3] Dr. Ferranti's association with the electricity meter persuaded Ince to partner him in this new venture, and meter development was fundamental to the survival and growth of his business for several decades to come.
Despite being a prime exponent of alternating current, Ferranti became an important supplier to many electric utility firms and power-distribution companies for both AC and DC meters.[4] In 1887, the London Electric Supply Corporation (LESCo) hired Dr. Ferranti for the design of their power station at Deptford. He designed the building, the generating plant and the distribution system and on its completion in October 1890, it was the first truly modern power station. It supplied high-voltage AC power at 10,000 volts, which was transformed to a lower voltage for consumer use where required.[1]
Success followed and Ferranti started producing electrical equipment (especially transformers) for sale. Soon the company was looking for considerably more manufacturing space. Land prices in the London area were too high, so the company moved to Hollinwood in Oldham in 1896.[2] In July 1901, Ferranti Limited was formed, specifically to take over the assets of S.Z. de Ferranti Ltd and raise equity, but failed to impress potential new investors as it was still dominated by family ownership. Over-optimistic market projections in the boom of 1896–1903, declining revenues and liquidity problems, forced the company bankers Parrs to send the company into receivership in 1903.[3]
The business was restructured in 1905, Dr. Ferranti's shareholding being reduced to less than 10%.[2] For the next eleven years the company was run by receiver managers and Dr. Ferranti was effectively excluded from commercial financial strategies. He spent much of this period working in partnership with the likes of J.P. Coats of Paisley on cotton spinning machinery and Vickers on re-superheating turbines.[3]
Expansion
Through the early part of the century power was supplied by small companies, typically as an offshoot of plant set up to provide power to local industry. Each plant supplied a different standard, which made the mass production of domestic electrical equipment inefficient. In 1910, Dr. Ferranti made a presidential speech to the IEE addressing this issue, but it would be another sixteen years before the commencement of the National Grid in 1926.[3]
In 1912, in a move driven by A.B. Anderson, the Ferranti Managing Director, Ferranti formed a company in Canada, Ferranti Electric, to exploit the overseas meter market. But in 1914, two significant events happened, Anderson drowned on his return from Canada in the Empress of Ireland sinking and the outbreak of WWI signalled an opportunity for Dr. Ferranti to once again get involved in day-to-day events in the company.[5] He wanted to get involved in the manufacture of shells and fuzes but it wasn't until 1915 that he finally convinced the board to accept this. As a result of this work Ferranti were in a healthier financial position at the end of the war.[5] High voltage power transformers became an important product for Ferranti;[2] some of the largest types weighed over a hundred tons. Dr. Ferranti's son Vincent joined the transformer department as manager in 1921 and was instrumental in expanding the work started by his father. After the death of Dr. Ferranti in 1930, he became the chairman and chief executive.[3] In 1935, Ferranti purchased a disused wire drawing mill at Moston: from here it manufactured many "brown goods" such as televisions, radios, and electric clocks.[2] The company later sold its radio and television interests to EKCO in 1957. Production of clocks ended in 1957 and other product lines phased out in 1960[6] Ferranti Instruments, based at Moston, developed various items for scientific measurements, including one of the first cone and plate viscometers. Ferranti built a new power transformer works at Hollinwood in the mid-1950s at a time when there was growth in the power supply distribution industry.
By 1974, Ferranti had become an important supplier to the defence industry, but its power transformer division was making losses, creating acute financial problems. This led to the company being bailed out by the government's National Enterprise Board, taking a 65% share of the company in return.[7]
Defence electronics
Spitfire gyro gunsight
During World War II, Ferranti became a major supplier of electronics, fuzes , valves, and was, through development of the Identification Friend or Foe (IFF) system, heavily involved in the early development of radar in the United Kingdom.[2] In the post-war era, this became a large segment of the company, with various branches supplying radar sets, avionics and other military electronics, both in the UK and the various international offices. In 1943, Ferranti opened a factory at Crewe Toll in Edinburgh to manufacture gyro gunsights for the Spitfire aircraft.[2] After the war they set up Ferranti Research to complement this business which grew to employ 8,000 staff in 8 locations, becoming the birthplace of the Scottish electronics industry,[8] and a major contributor to company profitability. Later products included solid state ring laser gyros.
From 1949, Ferranti-Packard assisted the Royal Canadian Navy develop DATAR (Digital Automated Tracking and Resolving). DATAR was a pioneering computerized battlefield information system that combined radar and sonar information to provide commanders with an "overall view" of a battlefield, allowing them to coordinate attacks on submarines and aircraft.[9]
In the 1950s, work focused on the development of airborne radar, with the company subsequently supplying radars to most of the UK's fast jet and helicopter fleets.[10] Today the Crewe Toll site (now part of Leonardo S.p.A.) leads the consortium providing the Euroradar CAPTOR radar for the Eurofighter Typhoon.[11]
In the 1960s and 1970s, inertial navigation systems became an important product line for the company with systems designed for fast jet (Harrier, Phantom, Tornado), space and land applications.[12] The electro-mechanical inertial navigation systems were constructed at the Silverknowes site in Edinburgh. In addition to their other military and civil applications, they were used in the ESA Ariane 4 and first Ariane 5 launches. Ferranti also produced the PADS (Position and Azimuth Determining System), an inertial navigation system which could be mounted in a vehicle and was used by the British Army.[13]
With the invention of the laser in the 1960s, the company quickly established itself in the electro-optics arena. From the early 1970s, it was delivering the Laser Rangefinder and Marked Target Seeker (LRMTS) for the Jaguar and Harrier fleets, and later for Tornado.[14] It supplied the world's first man-portable laser rangefinder/designator (Laser Target Marker, or LTM) to the British Army in 1974,[15] and had notable successes in the US market, establishing Ferranti Electro-optics Inc in Huntington Beach, California. Its TIALD Pod (Thermal Imaging Airborne Laser Designator) has been in almost constant combat operation on the Tornado since it was rushed into service during the first Gulf War.[16]
From the 1960s through to the late 1980s, the Bristol Ferranti Bloodhound SAM, for which Ferranti developed radar systems, was a key money earner. In 1970, Ferranti became involved in the sonar field through its involvement with Plessey in a new series of sonars, for which it designed and built the computer subsystems. This work later expanded when it won a contract for the complete Sonar 2050. The work was originally carried out at the Wythenshawe factory and then at Cheadle Heath. Takeovers of other companies gave it expertise in sonar arrays. This business later became Ferranti Thomson Sonar Systems.[17]
The selection of the radar for the project that became the Eurofighter Typhoon became a major international issue in the early 1990s. Britain, Italy, and Spain supported the Ferranti-led ECR-90, while Germany preferred the MSD2000 (a collaboration between Hughes, AEG and GEC). An agreement was reached after UK Defence Secretary Tom King assured his German counterpart Gerhard Stoltenberg that the British government would underwrite the project and allow GEC to acquire Ferranti Defence Systems from its troubled parent.[18] Hughes sued GEC for $600 million for its role in the selection of the EFA and alleged that it used Hughes technology in the ECR-90 when it took over Ferranti. It later dropped this allegation and was awarded $23 million; the court judged that the MSD-2000 "had a real or substantial chance of succeeding had GEC not tortuously intervened... and had the companies, which were bound by the Collaboration Agreement, faithfully and diligently performed their continuing obligations thereunder to press and promote the case for MSD-2000."[19]
Ferranti 837 All-Wave Superhet radio (1937), made of BakeliteFerranti radio
Industrial electronics
The company began marketing optical position measuring equipment for machine tools in 1956.[20] Moire fringes produced by diffraction gratings were the basis for the position measurement. In the late 1980s there were several sections of the company involved in non-military areas. These included microwave communications equipment (Ferranti Communications), and petrol (gas) station pumps (Ferranti Autocourt). Both of these departments were based at Dalkeith, Scotland.
In the late 1940s Ferranti joined with various university-based research groups to develop computers. Their first effort was the Ferranti Mark 1, completed in 1951,[2] with about nine delivered between 1951 and 1957. The Pegasus introduced in 1956 was their most popular valve (vacuum tube) system,[21] with 38 units sold. Circa 1956, Ivan Idelson, at Ferranti, originated the Cluff–Foster–Idelson coding of characters on 7-track paper tape for a BSI committee.[22] This also inspired the development of ASCII.[21]
In collaboration with the Victoria University of Manchester they built a new version of the famous Mark 1 that replaced valve diodes with solid state versions, which allowed the speed to be increased dramatically as well as increasing reliability.[23] Ferranti offered the result commercially as the Mercury starting in 1957, and eventually sold nineteen in total. Although a small part of Ferranti's empire, the computer division was nevertheless highly visible and operated out of a former steam locomotive factory in West Gorton.
Work on a completely new design, the Atlas,[21] started soon after the delivery of the Mercury, aiming to dramatically improve performance. Ferranti continued their collaboration with the University of Manchester, and Plessey Co., plc, became a third partner. The second generationsupercomputer first ran in December 1962. Eventually six machines were built, one of which was a stripped-down version that was modified for the needs of the University of Cambridge Mathematical Laboratory; the Titan (or Atlas 2) was the mainstay of scientific computing in Cambridge for nearly 8 years. Atlas was the first computer in the world to implement virtual memory.
By the early 1960s their mid-size machines were no longer competitive, but efforts to design a replacement were bogged down. Into this void stepped the Canadian division, Ferranti-Packard, who had used several of the ideas under development in England to very quickly produce the Ferranti-Packard 6000.[9] By this time Ferranti's management had tired of the market and were looking for someone to buy the entire division. Eventually it was merged into International Computers and Tabulators (ICT) in 1963, becoming the Large Systems Division of ICL in 1968. After studying several options, ICT selected the FP 6000 as the basis for their ICT 1900 series line which sold into the 1970s.
The deal setting up ICT excluded Ferranti from the commercial sector of computing, but left the industrial field free. Some of the technology of the FP 6000 was later used in its Ferranti Argus range of industrial computers which were developed in its Wythenshawe factory. The first of these, simply Argus, was initially developed for military use.[24]
Meanwhile, in Bracknell the Digital Systems Division was developing a range of mainframe computers for naval applications. Early computers using discrete transistors were the Hermes and Poseidon and these were followed by the F1600 in the mid-1960s.[25] Some of these machines remained in active service on naval vessels for many years. The FM1600B[26] was the first of the range to use integrated circuits and was used in many naval and commercial applications. The FM1600D was a single-rack version of the computer for smaller systems. An airborne version of this was also made and used aboard the RAFNimrod. The FM1600E was a redesigned and updated version of the FM1600B, and the last in the series was the F2420, an upgraded FM1600E with 60% more memory and 3.5 times the processing speed, still in service at sea in 2010.[17]
Semiconductors
Ferranti ULA 2C210E on a Sinclair ZX81 (a.k.a. Timex Sinclair 1000) motherboard
Ferranti had been involved in the production of electronic devices, including radio valves, cathode-ray tubes and germanium semiconductors for some time before it became the first European company to produce a silicondiode, in 1955. In 1972 they launched the ZN414, a single-chip AM radio integrated circuit in a 3-pin package.
Ferranti Semiconductor Ltd. went on to produce a range of silicon bipolar devices, including, in 1977, the Ferranti F100-L, an early 16-bit microprocessor with 16-bit addressing.[27] An F100-L was carried into space on the amateur radio satellite UoSAT-1 (OSCAR 9). Ferranti's ZTX series bipolar transistors gave their name to the inheritor of Ferranti Semiconductor's discrete semiconductor business, Zetex Semiconductors plc.[28]
In 1987 Ferranti purchased International Signal and Control (ISC), a United States defence contractor based in Pennsylvania.[30] The company subsequently changed its name to Ferranti International PLC. and restructured the combined business into the following divisions: Ferranti Computer Systems, Ferranti Defence Systems, Ferranti Dynamics, Ferranti Satcomms, Ferranti Telecoms, Ferranti Technologies and International Signal and Control.
Collapse
Unknown to Ferranti, ISC's business primarily consisted of illegal arms sales started at the behest of various US clandestine organizations. On paper the company looked to be extremely profitable on sales of high-priced "above board" items, but these profits were essentially non-existent. With the sale to Ferranti all illegal sales ended immediately, leaving the company with no obvious cash flow.[30]
In 1989 the UK's Serious Fraud Office started criminal investigation regarding alleged massive fraud at ISC. In December 1991 James Guerin, founder of ISC and co-chairman of the merged company, pleaded guilty before the federal court in Philadelphia to fraud committed both in the US and UK. All offences which would have formed part of any UK prosecution were encompassed by the US trial and as such no UK trial proceeded.[30]
The financial and legal difficulties that resulted forced Ferranti into bankruptcy in December 1993.[2]
Operations
De Havilland Heron operated from Manchester Airport 1962–1970 as an executive transport, particularly between the factories in Lancashire and Scotland. The company name is on the lower fin.
Ferranti Australia was based in Revesby, Sydney NSW. There was also a primarily defence-related branch office in South Australia.
Products manufactured by Ferranti Defence Systems included cockpit displays (moving map, head-down, head-up) video cameras and recorders, gunsight cameras, motion detectors, pilot's night vision goggles, integrated helmets, and pilot's stick controls.
On the Tornado aircraft, Ferranti supplied the radar transmitter, inertial navigation system, LRMTS, TIALD pod, mission recording equipment, and cockpit displays.
Current ownership of former Ferranti businesses
Ferranti Autocourt: Acquired by Wayne Dresser, renamed to Wayne Autocourt, before Autocourt name dropped
Ferranti Communications: Acquired by Thorn and branded Thorn Communications and Telecontrol Systems (CATS). Later acquired by Tyco International and renamed Tyco Communications. Still[when?] operating under the name TS Technology Services.
Ferranti Computer Systems:The Belgian subsidiary lives on as Ferranti Computer System and as of 1994 is part of the Nijkerk Holding.[31] The remainder was acquired out of administration by SYSECA, the IT arm of Thomson-CSF and renamed Ferranti-SYSECA Ltd.. Later, the Ferranti name was dropped and when Thomson changed its name to Thales Group, SYSECA became Thales Information Systems. Thales Information Systems later sold its German interest to Consinto Gmbh. The department dealing with airport systems was bought by Datel in around 1995 and continued to trade under the name Ferranti Airport Systems[32] until it was bought by Ultra Electronics. Other parts of Ferranti Computer Systems were acquired out of administration by GEC-Marconi. When GEC-Marconi sold on its defence-related businesses to BAE Systems, many of these former Ferranti entities became part of the BAE/Finmeccanica joint venture called Alenia Marconi Systems. This JV has now[when?] been dissolved and the former Ferranti entities are now[when?] part of BAE Systems Integrated System Technologies (Insyte).
Ferranti Defence Systems: Acquired by GEC-Marconi out of administration and renamed GEC Ferranti, later becoming part of GEC Marconi Avionics (GMAv). This business was acquired in 2000 by BAE Systems (BAE Systems Avionics). Part of this business, including the heritage Ferranti operation, was acquired by Finmeccanica in 2007 and renamed SELEX Galileo (now[when?]Selex ES). At one time there were design offices at Silverknowes, Robertson Avenue, South Gyle 1 and 2, Crewe Toll, Granton. After BAE Systems was formed the remaining factories at South Gyle were sold off and the staff made redundant despite their ground breaking work on the Avionics and Helmet for EFA and Aircraft Mission Computers.
Ferranti Dynamics: Acquired by GEC-Marconi in 1992
Ferranti Electronics (Ceramic Seals division): Acquired by Ceramic Seals Limited in 1990.
Ferranti Instrumentation: Dissolved. Some assets acquired by GEC-Marconi and Ravenfield Designs
Ferranti Tapchangers Ltd: Independent company, then acquired by UK-based grid control specialists Fundamentals Ltd Ferranti Tapchangers Ltd | Welcome in 2017
Ferranti Satcomms: Acquired out of administration by Matra Marconi Space in 1994
Ferranti Technologies: Was bought out by management and continues in Oldham specialising in avionics, defence electronics, and electronic power systems. It was acquired by Elbit Systems in 2007. After direct action by Palestine Action targeting their Oldham site, it was sold to TT Electronics in January 2022.[33]
Ferranti Air Systems: Acquired by Datel then turned into an independent company. Later bought by Ultra Electronics. In 2019 acquired by ADB Safegate.
Ferranti Subsea Systems: Management buyout in the early 1990s, renamed FSSL. Kværner bought more shares in 1994 and then turned to Kværner FSSL. Kværner is now[when?] known as Aker Solutions
Ferranti Computer Systems Service Department: This was acquired by the third party maintenance company ServiceTec. The regional Service Centres were rebranded as ServiceTec and all of the service engineers and management were taken on. The support of the Argus computers dominated activities although new (non-Argus) business was added to the regional centres. The repair centre at Cairo Mill also became part of the ServiceTec group, ultimately as a separate entity.
Ferranti Semiconductors: Became Zetex Semiconductors after a management buyout in 1989. In 2008 it was acquired by Diodes Inc.
Ferranti Photonics Ltd.: Independent, liquidated after bankruptcy in 2005
Other uses of the Ferranti name
A number of uses of the Ferranti name remain in use. In Edinburgh, the Ferranti Edinburgh Recreation Club (FERC), the Ferranti Mountaineering Club and the Ferranti Ten-pin Bowling League are still[when?] in existence. While these organisations no longer have any formal ties with the companies which subsumed the Ferranti companies which operated in Edinburgh, they still[when?] operate under the old names.
Ferranti Thistle F.C. was formed in 1943 and joined the Scottish Football League in 1974. Due to strict sponsorship rules it changed its name to Meadowbank Thistle F.C., and later to Livingston F.C.
Denis Ferranti Meters Limited is still (2021) owned by a direct descendant of Sebastian de Ferranti but is not directly related to the major Ferranti corporation. The company has over 200 employees that manufacture BT's public phones, oil pumps for large industrial vehicles, electric motors for motorbility solutions, electronics, and small MOD equipment.
Related Research Articles
Marconi Electronic Systems (MES), or GEC-Marconi as it was until 1998, was the defence arm of General Electric Company (GEC). It was demerged from GEC and bought by British Aerospace (BAe) on 30 November 1999 to form BAE Systems. GEC then renamed itself Marconi plc.
The General Electric Company (GEC) was a major British industrial conglomerate involved in consumer and defence electronics, communications, and engineering.
BAE Systems plc is a British multinational aerospace, defence and information security company, based in London, England. It is the biggest manufacturer in Britain as of 2017. It is the largest defence contractor in Europe and the seventh-largest in the world based on applicable 2021 revenues. Its largest operations are in the United Kingdom and in the United States, where its BAE Systems Inc. subsidiary is one of the six largest suppliers to the US Department of Defense. Its next biggest markets are Saudi Arabia, then Australia; other major markets include Canada, Japan, India, Turkey, Qatar, Oman and Sweden. The company was formed on 30 November 1999 by the £7.7 billion purchase of and merger of Marconi Electronic Systems (MES), the defence electronics and naval shipbuilding subsidiary of the General Electric Company plc (GEC), with British Aerospace, an aircraft, munitions and naval systems manufacturer.
The Plessey Company plc was a British electronics, defence and telecommunications company. It originated in 1917, growing and diversifying into electronics. It expanded after World War II by acquisition of companies and formed overseas companies.
The AI.24Foxhunter was an airborne radar carried by the Panavia Tornado ADV fighter aircraft and gave it an all-weather, day and night, beyond-visual-range engagement capability.
The Thermal Imaging Airborne Laser Designator (TIALD) was a targeting pod manufactured by Ferranti/GEC Marconi in the late 1980s and 1990s, and was the UK's primary laser designator for its Paveway series of laser-guided bombs (LGBs).
Alenia Marconi Systems (AMS) was a major European integrated defence electronics company and an equal shares joint venture between BAE Systems and Finmeccanica until its dissolution on 3 May 2005.
The Euroradar Captor is a next-generation mechanical multi-mode pulse Doppler radar designed for the Eurofighter Typhoon. Development of Captor led to the Airborne Multirole Solid State Active Array Radar (AMSAR) project which eventually produced the CAESAR, now known as Captor-E.
The Marconi Company was a British telecommunications and engineering company that did business under that name from 1963 to 1987. Its roots were in the Wireless Telegraph & Signal Company founded by Italian inventor Guglielmo Marconi in 1897, which underwent several changes in name after mergers and acquisitions. The company was a pioneer of wireless long distance communication and mass media broadcasting, eventually becoming one of the UK's most successful manufacturing companies. In 1999, its defence equipment manufacturing division, Marconi Electronic Systems, merged with British Aerospace (BAe) to form BAE Systems. In 2006, financial difficulties led to the collapse of the remaining company, with the bulk of the business acquired by the Swedish telecommunications company, Ericsson.
Thomson-CSF was a French company that specialized in the development and manufacture of electronics with a heavy focus upon the aerospace and defence sectors of the market.
Siemens Plessey was the name given to the Plessey assets acquired by Siemens in 1989. Today most of these units are part of BAE Systems while some units are now part of EADS.
GEC Plessey Telecommunications (GPT) was a British manufacturer of telecommunications equipment, notably the System X telephone exchange. The company was founded in 1988 as a joint venture between GEC and the British electronics, defence and telecommunications company Plessey. The next year, after a joint holding company of GEC and the German conglomerate Siemens acquired Plessey, GPT was converted into a 60/40 GEC/Siemens joint venture. The GPT name ceased to be used in the mid-1990s, and in 1998 the company was amalgamated into Siemens Communications.
Thomson Marconi Sonar or TMS was formed in 1996 by the merger of the sonar systems businesses of French defence electronics specialist Thomson-CSF and British company GEC-Marconi after the payment of a balance by the latter. The new company was 50.1% owned by Thomson-CSF and 49.9% by GEC-Marconi. Denis Ranque was appointed as its CEO. The new company would head 3 operational entities:
Tracor was a major North American defense electronics contractor which was acquired by Marconi Electronic Systems (MES), a subsidiary of General Electric Company plc, in 1998. Following the purchase of MES by British Aerospace in November 1999 to form BAE Systems, Tracor became BAE Systems Integrated Defense Solutions. Following a 2005 reorganisation, the company became BAE Systems Sensor Integration, part of Electronics and Integrated Solutions.
Thales Underwater Systems or TUS is a subsidiary of the French defense electronics specialist Thales Group. It was created in 2001 and belongs to its naval division. It specializes in the development and manufacturing of sonar systems for submarines, surface warships and aircraft, as well as communications masts and systems for submarines. Its headquarters are located in Sophia Antipolis, France.
BAeSEMA was a naval technology joint venture between British Aerospace and the French Sema Group. The company was formed in 1991 and dissolved in November 1998 when BAe purchased SEMA's 50% share.
BAE Systems Avionics was the avionics unit of BAE Systems until 2005, at which time it was transferred to SELEX Sensors and Airborne Systems S.p.A.. Selex S&AS became SELEX Galileo in 2008 and from January 2013 traded as Selex ES. It then merged into Leonardo S.p.A.'s land and naval defence electronics division on 1 January 2016.
SELEX Sistemi Integrati S.p.A. was an aerospace, defence and security-related electronics manufacturing company headquartered in Rome, Italy and a wholly owned subsidiary of Finmeccanica. It designed and developed systems for homeland security; systems and radar sensors for air defence, battlefield management, naval warfare, coastal and maritime surveillance; air traffic control; and turn-key airport solutions. The company had around 4,500 employees. On 1 January 2013, it merged with its sister companies SELEX Galileo and SELEX Elsag to form Selex ES.
Zetex Semiconductors plc is a UK-based manufacturer of discrete semiconductor devices such as diodes and transistors.
The British Aerospace Nimrod AEW3 was a proposed airborne early warning (AEW) aircraft which was to provide airborne radar cover for the air defence of the United Kingdom by the Royal Air Force (RAF). The project was designed to use the existing Nimrod airframe, in use with the RAF as a maritime patrol aircraft, combined with a new radar system and avionics package developed by Marconi Avionics.
↑ Savard, John J. G. (2018) [2005]. "Computer Arithmetic". quadibloc. The Early Days of Hexadecimal. Archived from the original on 16 July 2018. Retrieved 16 July 2018. (NB. Also has information on the Elliott 503 character set.)
Halton, Maurice J. "The Impact of Conflict and Political Change on Northern Industrial Towns, 1890 to 1990, " MA Dissertation, Faculty of Humanities and Social Science, Manchester Metropolitan University September 2001 (PDF; 326kB)
Lavington, Simon (2019), Early Computing in Britain:Ferranti Ltd. and Government Funding, 1948 — 1958, Springer, ISBN978-3-030-15103-4
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
