Industry | Aviation, engineering |
---|---|
Predecessor | Lang Propeller Co. |
Founded | 1923 |
Defunct | 1990s |
Fate | Ceased aircraft equipment and laminate manufacture |
Successor | AMETEK UK Ltd, Egger UK Ltd |
Headquarters | Addlestone & Weybridge, Surrey, England |
Key people | J.D.Titler, Dr.H.C.Watts |
Products | Propellers, fans, laminate products |
Brands | Weyroc, Weydec, Hardec |
The Airscrew Company Ltd (incorporating the Jicwood company) was a British manufacturing company based in Surrey manufacturing propellers.
The Airscrew Company was established in Weybridge, Surrey, England in 1923 when John Dodds Titler bought the assets of Lang, Garnett and Company, otherwise known as the Lang Propeller Company of Riverside Works, Weybridge. Lang Propellers was based at Hamm Moor Lane [1] and at its peak supplied wooden propellers to nearly every aeroplane company in England. Alcock and Brown flew the Atlantic in a Vickers Vimy fitted with Lang propellers; a letter held at Chertsey Museum confirms this and one of these four-bladed propellers survives at Brooklands Museum. The Lang company was absorbed into another aeronautical enterprise and vacated its works in Surrey. The company manufactured 2-blade wooden propellers for the early Spitfires [2] and Hurricanes. [3]
Airscrew became a limited company in 1931, and by 1938 had formed Jicwood Ltd as a joint venture between Itself and Halila, Ltd., of Bush House, London. The nominal capital of £36,000 was taken up between the Airscrew Co. and Halila. The board consisted of Mr. J. D. Titler (chairman), Dr. Henry Charles Watts (co-designer of the Leitner Watts propeller), Mr. R. Bradfield and Mr. F. T. Swann. Mr. Swann, who was a director of Halila, Ltd., joined the board of The Airscrew Co.(Flight of 9 December 1937)
The organisation employed around 200 staff at a site in Hamm Moor Lane, [4] Addlestone. By the beginning of World War II, the company was also making wooden-bladed ventilation fans and wind tunnels. Jicwood Ltd., the subsidiary company, manufactured fully compressed wood for various purposes. An extremely light sandwich material which consists of expanded rubber between either plywood or a light alloy were also manufactured. Samples of this product 24 ins. sq., weighing 52 ozs., were able to withstand a distributive load of 1 ½ tons when supported at two edges. The properties of this material were those required in aircraft flooring, bomb doors, superstructures and bulkheads for motor torpedo boats.
Wartime production requirements raised staff numbers to nearly 2,000 by 1945, and the company had its own Home Guard platoon, fire brigade and St John's Ambulance sections.
Sheppard Robson the architectural firm founded by Richard Sheppard designed [5] The Jicwood Bungalow in 1944 in response to the Need for temporary housing in the post war period and used materials such as stressed timber used in aircraft manufacture.
The company diversified further and developed a wide range of products, notably aircraft and Bus panels and bulkheads, transit containers, ventilating equipment and wind tunnels [6] and most importantly laminate wood products, manufactured as 'Weyroc', and also glass fibre products. The company changed its name to The Airscrew Company and Jicwood Ltd in 1950.
The company was bought by Bryant & May in 1957, shortly after J D Titler's death in April 1957. Under the terms of the agreement Bryant and May invested £500,000 in the company. Eoin Mekie, chairman of British Aviation Services, Frank Lynam became Managing Director (before joining the Airscrew Co., Lynam was with the firm of Metal Propellers Ltd, of Croydon, Surrey and the Airscrew section of the RAE). Airscrew was approached by Saunders-Roe in October 1958 for a fan design for the SR-N1hovercraft.
Under Bryant & May ownership two associated companies were created; Airscrew-Weyroc Canada (a chipboard making facility) & Airscrew Fans Ltd. [7] The company then passed into Swedish control when Bryant & May merged into Swedish Match.In 1961 the company changed its name to Airscrew -Weyroc Ltd (Weyroc being the trade title of their wood chipboard product). W.J.S. King-Smith became the managing director of the Fan Division until he retired (c.1973).
In 1966 Airscrew-Weyroc Ltd, received an order for ten fans for the Anglo-French Concorde. These were required for cooling the electronic equipment on prototype aircraft and for ground testing work to meet the rigid requirements of the cooling specification-, they were of a compact, light-weight, low-noise, high-efficiency type. [8]
The company was bought by the Howden Group [9] in c.1971, developing a range of fans for cooling and extraction purposes. In 1986, the Weybridge site was sold, demolished and redeveloped and Airscrew moved to 111 Windmill Road, Sunbury on Thames.
In December 1990 Airscrew Howden acquired Frazer-Nash Defence Systems for an undisclosed sum, following Frazer-Nash's entry into receivership. The Frazer-Nash Defence Systems division was sold in 1996 to ML Aviation Marcel Lobelle .
Around this time Weyroc products were manufactured in Hexham, Northumberland, with weyroc production having commenced on the site in 1964 and Weydec following shortly thereafter, and continue to be so since 1995 when Egger Uk Ltd. acquired Weyroc Ltd.
The Airscrew Company [10] became a principal subsidiary of the Airtechnology Group of the UK and has since been absorbed into Ametek Inc's Aerospace & Defence division based at the Windmill Road site producing AC and DC brushless, mixed flow, tubeaxial and vaneaxial fans, high-pressure blowers, AC and DC brushless motors and drivecsystems, build-to-print and custom subassemblies, electronic and fault sensing devices, electric heaters, switches and sensors.
Airscrew products have been used in various locomotives such as the Gardermoen High Speed Train and the Eurostar train.
The Vickers Wellington was a British twin-engined, long-range medium bomber. It was designed during the mid-1930s at Brooklands in Weybridge, Surrey. Led by Vickers-Armstrongs' chief designer Rex Pierson; a key feature of the aircraft is its geodetic airframe fuselage structure, which was principally designed by Barnes Wallis. Development had been started in response to Air Ministry Specification B.9/32, issued in the middle of 1932, for a bomber for the Royal Air Force.
Bristol Cars were manufacturers of hand-built luxury cars headquartered in Bristol, England. After being placed in receivership and being taken over in 2011, it entered liquidation in February 2020.
Weybridge is a town in the Borough of Elmbridge in Surrey, England, around 17 mi (27 km) southwest of central London. The settlement is recorded as Waigebrugge and Weibrugge in the 7th century and the name derives from a crossing point of the River Wey, which flows into the River Thames to the north of the town centre. The earliest evidence of human activity is from the Bronze Age. During the Anglo-Saxon and medieval periods, Weybridge was held by Chertsey Abbey.
Anzani was an engine manufacturer founded by the Italian Alessandro Anzani (1877–1956), which produced proprietary engines for aircraft, cars, boats, and motorcycles in factories in Britain, France and Italy.
Aircraft equipped with contra-rotating propellers, also referred to as CRP, coaxial contra-rotating propellers, or high-speed propellers, apply the maximum power of usually a single piston or turboprop engine to drive a pair of coaxial propellers in contra-rotation. Two propellers are arranged one behind the other, and power is transferred from the engine via a planetary gear or spur gear transmission. Contra-rotating propellers are also known as counter-rotating propellers, although counter-rotating propellers is much more widely used when referring to airscrews on separate non-coaxial shafts turning in opposite directions.
Frazer Nash was a brand of British sports car manufactured from 1922 first by Frazer Nash Limited founded by engineer Archibald Frazer-Nash. On its financial collapse in 1927 a new company, AFN Limited, was incorporated. Control of AFN passed to Harold John Aldington in 1929.
Addlestone is a town in Surrey, England. It is located approximately 18.6 mi (29.9 km) southwest of London. The town is the administrative centre of the Borough of Runnymede, of which it is the largest settlement.
Dowty Propellers is a British engineering company based in Brockworth, Gloucestershire that specialises in the manufacture, repair and overhaul of propellers and propeller components for customers around the world. It is owned by General Electric, forming part of its GE Aviation Systems division.
Vickers Limited was a British engineering conglomerate. The business began in Sheffield in 1828 as a steel foundry and became known for its church bells, going on to make shafts and propellers for ships, armour plate and then artillery. Entire large ships, cars, tanks and torpedoes followed. Airships and aircraft were added, and Vickers jet airliners were to remain in production until 1965.
Dowty Group was a leading British manufacturer of aircraft equipment. It was listed on the London Stock Exchange and was once a constituent of the FTSE 100 Index. The firm ceased operating as an individual entity following its acquisition by TI Group in 1992.
Captain Joseph "Mutt" Summers, was chief test pilot at Vickers-Armstrongs and Supermarine.
Hordern-Richmond was a British aeronautical engineering company that traded between 1937 and c. 1990.
Lang Propellers was a British company that manufactured aircraft propellers. The company operated independently from 1913 to 1936.
de Havilland Propellers was established in 1935, as a division of the de Havilland Aircraft company when that company acquired a licence from the Hamilton Standard company of America for the manufacture of variable-pitch propellers at a cost of about £20,000. Licence negotiations were completed in June 1934.
Archibald Goodman Frazer Nash, was an early English motor car designer, engineer, and inventor who specialised in manufacturer of light "cycle cars" and sports cars in England.
John Thompson Limited was a major engineering business based in Wolverhampton offering products for the nuclear engineering industry.
The Metal Airscrew Company was formed in 1919 by Dr. Henry Charles Watts and Henry Leitner to produce hollow metal aircraft propellers with a method set out their joint patent. By 1928 the company name had changed to Metal Propellers Ltd. It remained active until at least 1930.
Chalmer & Hoyer was a British coach-building company with premises in Poole, Dorset and Weybridge, Surrey. In 1926 the company name changed to the Hoyal Body Corporation Ltd.
Smith-Clayton Forge Ltd were a company specialising in drop forgings that was established in Lincoln. In 1966 Smith-Clayton Forge became a subsidiary of GKN and later was absorbed into British Steel. It then become part of United Engineering Forgings (UEF) which in 2000 and 2001 was sold on to Wyman Gordon and Bifrangi, who now operate on the Smith-Clayton Forge site.
{{cite web}}
: CS1 maint: archived copy as title (link)