HS.404 | |
---|---|
Type | Aircraft cannon |
Place of origin | Switzerland France |
Service history | |
Wars | |
Production history | |
Designer | Marc Birkigt |
Manufacturer | Hispano-Suiza |
Specifications | |
Mass | 49 kg (108 lb 0 oz) |
Length | 2.52 m (8 ft 3 in) |
Barrel length | 1.7 m (5 ft 7 in) |
Cartridge | 20×110mm |
Calibre | 20 mm (0.79 in) |
Action | Gas operated [1] |
Rate of fire | 700-750 rounds/min |
Muzzle velocity | 840–880 m/s (2,800–2,900 ft/s) |
Feed system | Drum magazine, belt (later models) |
20 mm M1 automatic gun | |
---|---|
Type | Aircraft cannon |
Place of origin | United States |
Service history | |
In service | United States Army Air Forces |
Used by | United States |
Wars | |
Production history | |
Manufacturer | International Harvester |
Produced | 1941 – April 1942 |
Variants | A/N M2, A/N M3, M24 |
Specifications | |
Mass |
|
Length | 2.54 m (100 in) |
Barrel length |
|
Cartridge | 20×110mm Hispano "A" |
Calibre | 20 mm (0.79 in) |
Action | Gas operated, delayed blowback [1] |
Rate of fire | 650–700 rounds/min |
Muzzle velocity | 870 m/s (2,900 ft/s) |
Maximum firing range | 6,500 m (7,000 yd) |
Feed system | 60-round M1 drum or linked belt |
Hispano Mk.V | |
---|---|
Type | Aircraft cannon |
Place of origin | United Kingdom |
Service history | |
Used by | United Kingdom & British Empire, Commonwealth, United States |
Wars | |
Specifications | |
Mass | 38 kg (83 lb 12 oz) |
Length | 2.184 m (7 ft 2.0 in) |
Barrel length | 1.333 m (4 ft 4.5 in) |
Cartridge | 20×110mm |
Calibre | 20 mm (0.79 in) |
Action | Gas operated, delayed blowback [1] |
Rate of fire | 700-750 rounds/min |
Muzzle velocity | 840 m/s (2,800 ft/s) |
Feed system | Belt |
The HS.404 is an autocannon originally designed by and produced by the Swiss arm of the Spanish/Swiss company Hispano-Suiza in the mid-1930s. Production was later moved to the French arm of Hispano-Suiza.
It was widely used as an aircraft, naval and land-based weapon by French, British, American and other military services, particularly during World War II. The cannon is also referred to as Birkigt type 404, after its designer Marc Birkigt and later versions based on British development are known as 20 mm Hispano. [2]
Firing a 20 mm calibre projectile, it delivered a significant load of explosive from a relatively light weapon. This made it an ideal anti-aircraft weapon for mounting on light vehicles, as well as a fighter aircraft gun, supplementing or replacing the 7.62 mm (.30 calibre) and .303 inch (7.7 mm) machine guns commonly used in military aircraft of the 1930s. The HS.404 was produced by the French subsidiary of Hispano-Suiza, and under license by a variety of companies in other countries.
The first widely used 20 mm aircraft cannon was the Becker model, introduced into German service in World War I. The Becker introduced the advanced primer ignition blowback (API) design for autocannons, a concept that was quickly taken up by other companies. Notable among the resulting designs was the Swiss Oerlikon FF S, which was based on the Becker but introduced a number of improvements. In the 1930s, Hispano-Suiza was asked to develop a 20 mm cannon to fire through the propeller shaft (as a moteur-canon SS) of a gear-reduction inline aviation engine like the Hispano-Suiza 8BeC. They took out a license on the Oerlikon FF S and made minor modifications to produce the Hispano-Suiza Automatic Cannon Type HS.7 and HS.9. Shortly after production began, the Hispano-Suiza and Oerlikon companies disagreed over patent rights and their business connection came to an end.
In 1933, the chief engineer of Hispano-Suiza, Marc Birkigt, began work on the design of a new weapon to replace the Oerlikon contract, based on a locking mechanism patented in 1919 by the Swedish-American machine-gun designer Gustaf Swebilius . [2] The result was the Type 404 or HS.404. While the HS.404 resembled the parent Oerlikon FF S in many respects, its repeating mechanism was a gas-operated locking bolt.
On firing the 404, when the projectile passes a hole cut in the barrel, about halfway along its length, high-pressure gas behind the projectile is siphoned off and operates a piston that drives a rod, running along the top of the barrel, back against a cam on the bolt, unlocking it and allowing the remaining high pressure gases in the barrel to propel it and the spent cartridge backwards in a delayed sequence that allows the bolt to remain closed until the projectile has exited from the barrel. This maximizes muzzle velocity [1] and since the bolt was locked during firing, it could be lighter than that of the Oerlikon, thus facilitating an increase in rate of fire to 700 rounds per minute (rpm), a gain of about 200 rpm. In 1938, Birkigt patented it and started production in their Geneva factory. [2]
The HS.404's predecessor, the Oerlikon type S auto-cannon, was rather heavy, and the movement of the heavy bolt made it best suited in static and maritime anti-aircraft defence. The lighter bolt of the HS.404 made it well suited to mounting on vehicles. The M16, an anti-aircraft version of the M3 Half-track, could be equipped with single or double American made copies of the Hispano-Suiza auto-cannon. This variant of the M3 Half-track was used by US and Commonwealth forces late in the Second World War, in the Korean War and was further developed by Israel in the post-war era. [3]
In 1938, an aircraft based version of the HS.404 was produced at the request of the French government. It was installed on a wide range of pre-war French fighter aircraft, notably in installations firing through the propeller shaft of the Hispano-Suiza 12Y engine, a system referred to as a moteur-canon (engine cannon). Due to the closed-bolt design the cannon was also suitable for synchronisation gear. The HS.404 was fed by drum magazines that could accommodate 60 (or in a fixed mount 160 [4] ) rounds. Since in most installations the latter was more popular, the small ammunition capacity was a weakness. In 1940, Hispano-Suiza was developing a belt-feeding system, as well as derivatives of the HS.404 in heavier calibres such as 23 mm but these projects were halted with the German occupation of France. [2]
Before the Second World War, the United Kingdom had embarked on a programme to develop cannon-armed fighters. [5] They acquired a licence to build the HS.404, which entered production as the Hispano Mk.I intended as aeroplane armament. Its first use was in the Westland Whirlwind of 1940 and later in the more powerful Bristol Beaufighter, providing the Royal Air Force (RAF) with powerful cannon-armed interceptors. [6] The experience of the Battle of Britain had shown the batteries of eight rifle-calibre M1919 Browning machine guns to be inadequate and prompted the adoption of autocannon armament for the primary portion of RAF fighters. [7] [ page needed ] The Beaufighter highlighted the need for a belt feed mechanism; as a night fighter the 60-round drums needed to be replaced in the dark by the Radar/Wireless Operator, often while the aircraft was manoeuvring. The early trial installations in the Hawker Hurricane and Supermarine Spitfire had shown a tendency for the gun to jam during combat manoeuvres, leading to some official doubt as to the suitability of cannon as the sole main armament. This led to the Air Ministry for a brief period specifying 12-machine gun armament for new fighters. [7]
A suitable belt-feeding system was developed by Martin-Baker and the new design was adopted by the RAF and Fleet Air Arm in 1941 in a slightly modified form as the Hispano Mk.II. Four cannons replaced the eight Browning machine guns in the Hurricane and in some tropical versions of the Spitfire, becoming standard armament in later fighters. [8] Most other Spitfires had only two cannons because the outboard cannon tended to freeze at high altitudes. These were complemented with four 0.303 calibre (7.7 mm) or two 0.50 calibre (12.7 mm) machine guns. [9] [ page needed ]
The British were concerned their production would be inadequate and licensed production of the Hispano to the US but this production never became satisfactory and the British eventually gave up on the US versions. British production was eventually increased to the point where this was no longer necessary. The ultimate version of the British wartime Hispanos was the Hispano Mk. V, which had a shorter barrel, and lacked the cocking cylinder thus requiring manual cocking before flight. It was lighter and had a higher rate of fire (desirable in aircraft armament), although at the expense of some muzzle velocity. The shorter barrel meant that the weapon could be housed within the wing of a fighter plane, reducing drag and making the gun less vulnerable to freezing and mechanical stress. One of the main British fighters to use the Mk. V was the Hawker Tempest Mk. V Series II, which mounted two cannons in each wing. [10] Ammunition types available included semi-armour piercing, incendiary (SAPI) and high explosive, incendiary (HEI). [11] Around 42,500 Hispano cannons of various marks were manufactured by Birmingham Small Arms (BSA).
The British version was also licensed for use in the United States as the M1, with the United States Army Air Corps (USAAC) and U.S. Navy, which concluded that a single HS404 is analogous to three .50 machine guns in firepower while weighing less than twice as much, planning to switch to the 20 mm calibre as soon as the gun could be produced in sufficient numbers. In 1941 a very large building program was established, along with the production of ammunition. When delivered, the guns proved to be extremely unreliable and suffered a considerable number of misfires due to the round being lightly struck by the firing pin. [12] The British were interested in using this weapon to ease the demand on production in England but after receiving the M1 they were disappointed. British wing-mounted fighter weapons by this period were cocked on the ground by the aircraft armourers before flight, the pneumatic cocking mechanism used previously being regarded as unnecessary weight and detrimental to aircraft performance; any stoppage in flight made the gun unusable until it could be cleared on the ground. The misfires also had the tendency to cause aircraft with wing-mounted guns to yaw away from the wing with the failed gun when the guns were fired, due to the unequal recoil, throwing off the pilot's aim.
In April 1942 a copy of the British Mk.II was sent to the U.S. for comparison. The British version used a slightly shorter chamber and did not have the same problems as the U.S. version of the cannon. [12] The U.S. declined to modify the chamber of their version but nonetheless made other modifications to create the unreliable M2. By late 1942 the USAAF had 40 million rounds of ammunition stored but the guns remained unsuitable. The U.S. Navy had been trying to switch to using cannon on all its combat aircraft throughout the war but the conversion never occurred. As late as December 1945 the U. S. Army Chief of Ordnance was still attempting to complete additional changes to the design to allow it to enter service. [12] Some variations of the 20 mm guns used on the Lockheed P-38 Lightning aircraft were produced by International Harvester. [13] The P-38's nose-mounted M2 featured a built-in cocking system and could simply be re-cocked in flight after a misfire, which made the misfires less of a problem than with other aircraft. [14]
The U.S. followed the British development closely and when the Mk.V was designed, the Americans followed suit with the A/N M3 but unreliability continued. After the war the United States Air Force (USAF) adopted a version of the M3 cannon as the M24, similar in most respects except for the use of the addition of electrical cocking, allowing the gun to re-cock over a lightly struck round. [9] The problems of the American weapons led to most U.S. fighters being equipped with the AN/M2 .50 cal Browning light-barrel machine gun throughout the war. [15]
After the war, the Hispano variants disappeared fairly quickly as fighter armament due to the introduction of revolver cannon, based on the prototype versions of the un-built German wartime Mauser MG 213 design. The British introduced the powerful revolving 30 mm ADEN cannon in most of their post-war aircraft, while the French used the similar DEFA cannon, firing similar ammunition. The USAF introduced the 20 mm M39 cannon to replace the M24, while the Navy combined the original Hispano design with a lighter round for better muzzle velocity in the Colt Mk 12 cannon. [16] As a ground vehicle-mounted gun, either anti-aircraft or as a general-purpose autocannon, the HS.404 lasted into the 1960s. A powered turret variant is still in production in Honduras and is used as a light anti-aircraft gun by the army and navy in several nations. [17] The AN/M3 was developed into the Mk12 Colt 20 mm automatic cannon, one of the main weapons on boats of the Mobile Riverine Force in the Vietnam War and also used on some larger amphibious ships. [18]
The Hispano fired a 130 grams (4.586 oz) 20 mm diameter projectile from a 110 mm (4.331 in) long casing, the whole round weighing 257 g (9.065 oz). [19] Lengths of the projectiles varied with type but were set to variable depth in the casing to produce a total full round length of 184 mm (7.244 in) regardless of projectile type. [20] The gun had a muzzle velocity between 840 and 880 m/s (2,800 and 2,900 ft/s), depending on barrel length. Rate of fire was between 600 and 850 rounds per minute. The gun was 2.36 m (7 ft 9 in) long, weighing between 42 and 50 kg (93 and 110 lb). The British Mk V and American M3/M24 weapons were lighter and had higher rates of fire than the early HS.404 guns. [21]
Ammunition was shipped in rectangular 10-shell fiberboard cartons. There were 12 cartons per metal-lined wooden packing crate (120 rounds).
The M90 series of shells were ballistically matched to make it easier to use different types without losing accuracy. Ammunition was shipped in 25-round metal canisters. There were six metal canisters per wooden crate (150 rounds).
An autocannon, automatic cannon or machine cannon is a fully automatic gun that is capable of rapid-firing large-caliber armour-piercing, explosive or incendiary shells, as opposed to the smaller-caliber kinetic projectiles (bullets) fired by a machine gun. Autocannons have a longer effective range and greater terminal performance than machine guns, due to the use of larger/heavier munitions, but are usually smaller than tank guns, howitzers, field guns, or other artillery. When used on its own, the word "autocannon" typically indicates a non-rotary weapon with a single barrel. When multiple rotating barrels are involved, such a weapon is referred to as a "rotary autocannon" or occasionally "rotary cannon", for short.
R4M, abbreviation for Rakete, 4 kilogramm, Minenkopf, also known by the nickname Orkan due to its distinctive smoke trail when fired, was a folding-fin air-to-air rocket used by the Luftwaffe at the end of World War II.
The MK 108 is a 30 mm caliber autocannon manufactured in Germany during World War II by Rheinmetall‑Borsig for use in aircraft.
The Maschinengewehr (MG) 151 is a belt-fed autocannon for aircraft use, developed in Nazi Germany from 1934 to 1940 and produced by Waffenfabrik Mauser during World War II. It was originally produced in 15.1 mm caliber from 1940, with a 15×96mm cartridge, but due to demand for higher effect against aircraft, especially with the introduction of mine shells for the 20 mm MG-FF/M aircraft cannon, the design was rechambered to 20 mm caliber in 1941, using a newly developed 20×82mm cartridge which traded projectile velocity for explosive power. The initial 15 mm variant then became known as the MG 151/15, with the new 20 mm variant becoming the MG 151/20.
A revolver cannon is a type of autocannon, commonly used as an aircraft gun. It uses a cylinder with multiple chambers, similar to those of a revolver handgun, to speed up the loading-firing-ejection cycle. Some examples are also power-driven, to further speed the loading process. Unlike a rotary cannon, a revolver cannon only has a single barrel, so its spun weight is lower. Automatic revolver cannons have been produced by many different manufacturers.
The Royal Small Arms Factory ADEN cannon is a 30 mm revolver cannon used on many military aircraft, particularly those of the British Royal Air Force and Fleet Air Arm. Developed post-World War II primarily to meet British Air Ministry's requirement for increased lethality in aircraft armament, the cannon was fired electrically and is fully automatic once it is loaded.
The MG FF was a drum-fed, blowback-operated, 20 mm aircraft autocannon, developed in 1936 by Ikaria Werke Berlin of Germany. It was a derivative of the Swiss Oerlikon FF F cannon, with the Oerlikon FF design itself a development of the Imperial German World War I Becker 20 mm cannon, and was designed to be used in space-limited, fixed mountings such as inside aircraft wings, although it saw use as both an offensive and a defensive weapon, in both fixed and flexible format. It saw widespread use in those roles by the German Luftwaffe, particularly during the early stages of World War II, although from 1941 onwards it was gradually replaced by the Mauser firm's 20 mm MG 151/20, which had both a higher rate of fire and muzzle velocity.
The 2-pounder gun, officially the QF 2-pounder and universally known as the pom-pom, was a 40 mm (1.6 in) British autocannon, used as an anti-aircraft gun by the Royal Navy. The name came from the sound that the original models make when firing. This QF 2-pounder was not the same gun as the Ordnance QF 2-pounder, used by the British Army as an anti-tank gun and a tank gun, although they both fired 2 lb (0.91 kg), 40 mm (1.6 in) projectiles.
The FF were a series of 20mm autocannon introduced by Oerlikon in the late 1920s. The name comes from the German term Flügel Fest, meaning wing mounted, fixed, being one of the first 20mm guns to be small and light enough to fit into a fighter aircraft's wing. The FF series inspired many 20mm cannon used in World War II, including the Hispano-Suiza HS.404, the German MG FF, and the Japanese IJNAS's Type 99 cannon.
The Oerlikon 20 mm cannon is a series of autocannons based on an original German Becker Type M2 20 mm cannon design that appeared very early in World War I. It was widely produced by Oerlikon Contraves and others, with various models employed by both Allied and Axis forces during World War II. Many versions of the cannon are still used today.
The Rheinmetall Mk 20 Rh-202 is a 20 mm caliber autocannon designed and produced by Rheinmetall. It fires the 20×139mm ammunition originally developed for the Hispano-Suiza HS.820.
The Berezin B-20 was a 20 mm caliber autocannon used by Soviet aircraft in World War II.
The Flak 30 and improved Flak 38 were 20 mm anti-aircraft guns used by various German forces throughout World War II. It was not only the primary German light anti-aircraft gun but by far the most numerously produced German artillery piece throughout the war. It was produced in a variety of models, notably the Flakvierling 38 which combined four Flak 38 autocannons onto a single carriage.
The Hispano Aviación HA-1109 and HA-1112 are licence-built versions of the Messerschmitt Bf 109 G-2 developed in Spain during and after World War II.
The Ho-5 was a Japanese aircraft autocannon used during World War II. Developed from the Ho-103 machine gun, it was a version of the American Model 1921 Browning aircraft machine gun. It replaced the Ho-1 and Ho-3 in general service. The Ho-5 was belt-fed using typical Browning-style steel disintegrating links. The cartridge used was a shortened version of the Allied 20 x 110mm Hispano-Suiza HS.404.
The Hawker Hurricane was a British single-seat fighter aircraft designed and predominantly built by Hawker Aircraft. Some versions were built in Canada by Canadian Car and Foundry.
Supermarine Spitfire variants powered by early model Rolls-Royce Merlin engines mostly utilised single-speed, single-stage superchargers. The British Supermarine Spitfire was the only Allied fighter aircraft of the Second World War to fight in front line service from the beginnings of the conflict, in September 1939, through to the end in August 1945. Post-war, the Spitfire's service career continued into the 1950s. The basic airframe proved to be extremely adaptable, capable of taking far more powerful engines and far greater loads than its original role as a short-range interceptor had called for. This would lead to 19 marks of Spitfire and 52 sub-variants being produced throughout the Second World War, and beyond. The many changes were made in order to fulfil Royal Air Force requirements and to successfully engage in combat with ever-improving enemy aircraft. With the death of the original designer, Reginald J. Mitchell, in June 1937, all variants of the Spitfire were designed by his successor, Joseph Smith, and a team of engineers and draftsmen.
The HS.820 is a 20 mm caliber autocannon developed by Hispano-Suiza primarily for aircraft use, but more widely used in a series of ground-based anti-aircraft guns. After Oerlikon purchased Hispano's armaments division in 1970, the HS.820 became the Oerlikon KAD, supplanting Oerlikon's own KAA and KAB weapons in the process. A US-built model, the M139, saw some use on vehicles.
Mark XVI or Mark 16 often refers to the 16th version of a product, frequently military hardware. "Mark", meaning "model" or "variant", can be abbreviated "Mk."
The 33mm APX was a series of 33 mm caliber autocannon manufactured in France during the early 1930s for use in aircraft.