F-89 Scorpion | |
---|---|
General information | |
Type | Interceptor |
Manufacturer | Northrop Corporation |
Primary user | United States Air Force |
Number built | 1,050 and 2 prototypes |
History | |
Introduction date | September 1950 |
First flight | 16 August 1948 |
Retired | 1969 |
The Northrop F-89 Scorpion is an all-weather, twin-engined interceptor aircraft designed and produced by the American aircraft manufacturer Northrop Corporation. It was the first jet-powered aircraft to be designed for the interceptor role from the outset to enter service, [1] as well as the first combat aircraft to be armed with air-to-air nuclear weapons in the form of the unguided Genie rocket. The name Scorpion came from the aircraft's elevated tail unit and high-mounted horizontal stabilizer, which kept it clear of the engine exhaust. [2]
The Scorpion was designed by Northrop in response to a specification issued by the United States Army Air Forces (USAAF) during August 1945. Internally designated as the N-24, it was originally designed with a relatively slim fuselage, buried Allison J35 turbojet engines, and a swept wing configuration, however, the unfavorable low speed characteristics of this wing led to its substitution for a relatively thin straight wing instead. While its straight wings limited its performance, the Scorpion was among the first American fighters to be equipped with guided missiles. During March 1946, the USAAF selected both the N-24 and the rival Curtiss-Wright XP-87 Blackhawk for development, leading to an initial contract for two aircraft, designated XP-89, being approved on 13 June 1946.
On 16 August 1948, the prototype performed its maiden flight from Muroc Army Air Field. Following competitive evaluations of the XP-89, officials opted to cancel the competing XP-87 to concentrate resources on the Scorpion, it having proven to be the fastest aircraft evaluated and was viewed as the most promising. Various alterations and improvements were made following a fatal accident on 22 February 1950; prior to this, officials had already specified the adoption of more powerful afterburner-equipped Allison J33-A-21 turbojet engines, AN/APG-33 radar, and the Hughes E-1 fire-control system. During September 1950, the Scorpion entered service with the United States Air Force (USAF), its sole operator.
Only 18 F-89As were completed as it was quickly superseded by the more capable F-89B configuration, most of the changes being avionics-based, that arrived in June 1951. It was soon followed by the F-89C, which featured engine upgrades. During 1954, the definitive F-89D was introduced, which installed a new Hughes E-6 fire control system with AN/APG-40 radar and an AN/APA-84 computer in place of the cannon armament, being instead armed with 2.75-inch (70 mm) "Mighty Mouse" FFAR rocket pods. The final variant to enter service was the F-89J, which was typically armed with the AIR-2 Genie nuclear air-to-air rocket. They served with the Air Defense Command, later renamed the Aerospace Defense Command (ADC), through 1959, and with the Air National Guard, into the late 1960s. The last Scorpions were withdrawn from use in 1969.
The origins of the Scorpion can be traced back to a United States Army Air Forces (USAAF) Air Technical Service Command specification ("Military Characteristics for All-Weather Fighting Aircraft") for a night fighter to replace the Northrop P-61 Black Widow. The preliminary specification, issued to aircraft manufacturers on 28 August 1945, required two engines and an armament of six guns, either 0.60-inch (15 mm) machine guns or 20 mm (0.79 in) autocannons. The revised specification was issued on 23 November; it did not specify jet propulsion, but the desired maximum speed of 530 miles per hour (460 kn; 850 km/h) was challenging to meet via alternative means. The aircraft was to be armed with aerial rockets stored internally and six guns split between two flexible mounts, four guns forward and two in the rear. Each mount had to be capable of 15° of movement from the aircraft's longitudinal axis; each mount's guns were to be automatically controlled by radar. For ground attack, it had to be capable of carrying 1,000-pound (454 kg) bombs and to be able to carry a minimum of eight rockets externally. [3] Further requirements included the ability to ascend to 35,000 feet within 12 minutes and a mission radius of 600 nautical miles. [4]
Proposals were submitted by six aircraft companies: Bell Aircraft, Consolidated-Vultee, Douglas Aircraft, Goodyear, Northrop and Curtiss-Wright. [4] The majority of these submissions were powered by jet engines. During March 1946, the USAAF selected the Curtiss-Wright XP-87 Blackhawk, adapted from its proposed XA-43 attack aircraft and the Northrop N-24, one of four designs submitted by the company. [5] [4]
The N-24, designed by Jack Northrop, was a slim-bodied, swept-wing aircraft with a two-person, pressurized cockpit and conventional landing gear. [6] To reduce drag, the two Allison J35 turbojet engines were buried in the lower fuselage, directly behind their air intakes, and they exhausted underneath the rear fuselage. The horizontal stabilizer was mounted just above the junction of the vertical stabilizer with the fuselage and had some dihedral. [7]
On 13 June 1946, an initial $4 million contract for two aircraft, designated XP-89, along with a full-scale mock-up, was approved. [8] However, the mock-up construction had commenced immediately after the USAAF announced that the N-24 had been selected. It was inspected on 25 September, at which point the USAAF expressed some reservations. The inspectors believed that the radar operator needed to be moved forward, closer to the pilot, with both crewmen under a single canopy, the magnesium alloy components of the wing replaced by aluminum alloy, and the fuel tankage directly above the engines moved. Other changes were made in response to the results from wind tunnel and other aerodynamic tests conducted. [8] The swept wings proved less satisfactory at low speeds, and a thin straight wing was selected, instead. Delivery of the first prototype was scheduled for November 1947, 14 months after the inspection. [9] The requested alterations to the design were formalized in a series of change orders issued to Northrop. [8] Another mockup presentation took place in December 1946. [8]
Further changes included the position of the horizontal stabilizer also proved to be unsatisfactory, as it was affected by the engine exhaust, and it would be "blanked-out" by airflow from the wing at high angles of attack. It was moved halfway up the tail, but its position flush with the leading edge of the vertical stabilizer proved to cause extra drag through turbulence and reduced the effectiveness of the elevators and rudder. Moving the horizontal stabilizer forward solved the problem. [10] Another major change occurred when USAAF revised its specification to delete the rear gun installation on 8 October. Another mock-up inspection was held on 17 December, and the inspectors suggested only minor changes, though the fuselage fuel tanks were still above the engines. Northrop's efforts to protect the fuel tanks were considered sufficient, as the only alternative was redesigning the entire aircraft. [11]
The XP-89 had a thin, straight, mid-mounted wing and a crew of two seated in tandem. The slim rear fuselage and the high-mounted horizontal stabilizer led to Northrop employees calling it the Scorpion—a name later formally adopted by the Air Force. [6] The intended armament of four 20-mm M24 cannon in a small nose turret was not ready when the XP-89 was completed in 1948. [12] Pending the availability of either turret under development, an interim six-gun fixed installation, with 200 rounds per gun, was designed for the underside of the nose. The thin wing had an aspect ratio of 5.88, a thickness-to-chord ratio of 9% and used a NACA 0009-64 section, which was selected for its low drag at high speed and stability at low speeds. A further advantage of the straight wing was that it could accommodate heavy weights at the wingtips. [13] The wing could not fit the circular-type (rotating) spoilerons used in the P-61, so Northrop used the "decelerons" designed for the unsuccessful XP-79 prototype. These were clamshell-style split ailerons, which could be used as conventional ailerons, as dive brakes, or function as flaps as needed. [14] All flying surfaces, the flaps, and the landing gear were hydraulically powered. The thin wing dictated tall, thin, high-pressure (200 psi (1,379 kPa ; 14 kgf/cm2 )) mainwheel tires, while the low height of the fuselage required the use of dual wheels for the nose gear. [15]
On 21 May 1947, the terms of the initial contract were revised and formalized, at which point the price was increased to $5,571,111. [8] The delivery date of the first aircraft was scheduled for 14 months (July 1948) from signing and the second two months after that. During June 1948, an engineering acceptance inspection found that numerous discrepancies were present in the first prototype, specifically related to stability and structural integrity; remedial changes were incorporated on the second prototype. [8] On 16 August 1948, the first prototype performed its maiden flight at Muroc Army Air Field; this milestone was reached nine months later than originally scheduled. One month prior to this first flight, the USAF changed its designation for fighter aircraft from "P" to "F". [16] [8] The XF-89, which was fitted with 4,000 lbf (18 kN) Allison J35-A-9 turbojets, quickly proved to be fundamentally underpowered. Initial flights were performed with conventional ailerons as the decelerons were not installed until December. [15] [17]
Several months earlier, the Air Force conducted a competitive evaluation of the three existing all-weather interceptor prototypes, the XF-87, the XF-89, and the US Navy's XF3D. [8] The evaluators were qualified night-fighter pilots, radar operators, and experienced maintenance non-commissioned officers. The pilots were not impressed with any of the aircraft and recommended procurement of an interim aircraft that resulted in the development of the Lockheed F-94 Starfire from the training version of the Lockheed F-80 Shooting Star. The F-89 was the fastest of the three contenders, [18] although it was in last place in cockpit arrangement and ease of maintenance. [12] One pilot claimed that the XF-89 was the only real fighter and compared the XF-87 to a medium bomber and the XF3D to a trainer. [18] The full Committee on Evaluation overruled those evaluators, preferring the Northrop design, as it had the greatest potential for development. The Air Force subsequently canceled the production contract for the F-87 to free up money for the Scorpion. [15] [19]
During May 1949, the Air Force issued a cost-plus-fixed-fee contract, valued at roughly $48 million, which covered the modifications to the second prototype as well as the supply of the first 48 production standard aircraft, spare parts, tooling, ground-handling equipment, and a single static test frame. [17] [20] Two months later, the Air Force officially accepted the first prototype, roughly one year behind schedule. [17] By November 1949, the second aircraft was virtually complete. Around this point, Air Force officials were concerned about the aircraft's poor thrust-to-weight ratio and ordered the implementation of a weight-reduction program, as well as upgrade the engines to the more powerful Allison J33-A-21 fitted with an afterburner. Other major changes included the replacement of the nose gun turret by the Hughes-designed six-gun nose, AN/ARG-33 radar, and Hughes E-1 fire-control system, permanent wingtip fuel tanks, and the ability to lower the complete engine for better maintenance access. The new nose added 3 feet (0.91 m) to the length of the aircraft. It was redesignated YF-89A to reflect its role as a pre-production testbed to evaluate equipment and changes planned for the F-89A production aircraft. The aircraft was complete by February 1950. [21]
After repairs from a crash landing on 27 June 1949, the XF-89 was flown to March AFB to participate in the RKO movie Jet Pilot in February 1950. Shortly afterward, the aircraft crashed on 22 February, killing the observer, when flutter developed in the elevator, and the subsequent vibrations caused the entire tail to break off. [17] Construction of the production models was suspended until the reasons for the accident were discovered. Engineering and wind tunnel tests revealed that the geometry of the rear fuselage and the engine exhaust created flutter-inducing turbulence aggravated by the exhaust's high-frequency acoustic energy. Fixes for the problem involved the addition of a "jet wake fairing" at the bottom rear of the fuselage between the engines, external ("ice tong") mass balances for the elevator, pending the design of internal mass balances, [22] and the addition of exhaust deflectors to the fuselage to reduce the turbulence and the consequent flutter. [23] These modifications were initially applied to the second prototype to validate their effectiveness. [24]
On 28 September 1950, the first F-89A was accepted by the Air Force for evaluation purposes; a further two aircraft were accepted by the end of the year. [25] Two months later, the Air Force decided to give its endorsement to the programme, albeit with stringent conditions being applied. These included the remaining flight test programme being accelerated, special tests being performed upon early production aircraft to prove the flutter issue had been resolved, and a deadline of January 1951 was set for the final resolution of this issue. [25] As a result of increased unit costs, in part due to modifications, the number of production aircraft on order was reduced somewhat. [26] Production aircraft were equipped with the AN/APG-33 radar and an armament of six 20-millimeter T-31 cannon with 200 rounds per gun. The swiveling nose turret was abandoned, and 300-US-gallon (250 imp gal; 1,100 L) fuel tanks were permanently fitted to the wingtips. Underwing racks could carry 16 5-inch (130 mm) aerial rockets or up to 3,200 lb (1,451 kg) of bombs. [27]
Only 18 F-89As were completed, all of which being delivered within FY1951; they were mainly used for tests and trials, seeing little operational use. [28] They were soon upgraded to F-89B standard, being outfitted with new avionics. [27] During June 1951, the Scorpion entered service with the 84th Fighter-Interceptor Squadron. [28] However, the F-89B experienced considerable problems with both the engines and other systems, resulting in its withdrawal from frontline duties during 1954. [29] The improved F-89C had started to be introduced in September 1951, although the Air Force opted to halt allocations four months later due to issues. Despite repeated engine changes and other modifications, problems had persisted, compounded by the discovery of structural problems with the wings that led to the grounding of the F-89 and forced a refit of 194 -A, -B, and -C models. [30] On 22 September 1952, all Scorpions, save for those involved in flight testing, were grounded until the following year. [31] The F-89C left active service with the Air Force in 1954, it was operated by the Air National Guard as late as 1960. [32]
The definitive production model was the F-89D. While it performed its first flight on 23 October 1951, quantity production was disrupted by the issues encountered on early models, resulting in major structural modifications, after which full production was resumed during 1953. [33] Approximately 170 F-89Ds, the majority of which having been built prior to the resumption of production, were retrofitted to bring them up to the same standard as later-built aircraft. On 7 January 1953, the F-89D was introduced to service. [34] It removed the cannon in favor of a new Hughes E-6 fire control system with AN/APG-40 radar and an AN/APA-84 computer. Armament was two pods of fifty-two 2.75-inch (70 mm) "Mighty Mouse" FFAR rockets. [35] [36] A total of 682 F-89Ds were built. [37] In August 1956, a pair of F-89D interceptors were scrambled from Oxnard Air Force Base to shoot down a runaway F6F-5K drone leading to the so-called Battle of Palmdale, in which they fired all their rockets but failed to damage the Hellcat drone. [38]
Proposed re-engined F-89s, designated F-89E and F-89F, were not built, nor was a proposed F-89G that would have used Hughes MA-1 fire control and GAR-1/GAR-2 Falcon air-to-air missiles like the Convair F-106 Delta Dart. [39]
The subsequent F-89H, which entered service in 1956, had an E-9 fire control system like that of the early F-102 and massive new wingtip pods, each holding three Falcons (usually three semi-active radar homing GAR-1s and three infrared GAR-2s) and 21 FFARs, for a total of six missiles and 42 rockets. [40] Problems with the fire-control system delayed the -H's entry into service, by which time its performance was notably inferior to newer supersonic interceptors, so it was phased out of USAF service by 1959. [41]
The final variant was the F-89J, which was based on the F-89D, but replaced the standard wingtip missile pod/tanks with 600-US-gallon (500 imp gal; 2,300 L) fuel tanks and fitted a pylon under each wing for a single MB-1 Genie nuclear rocket (sometimes supplemented by up to four conventional Falcon air-to-air missiles). [41] The F-89J became the only aircraft to fire a live Genie as the John Shot of Operation Plumbbob on 19 July 1957. [42] There were no new-build F-89Js, but 350 -Ds were modified to this standard. They served with the Air Defense Command, later renamed the Aerospace Defense Command (ADC), through 1959 and with ADC-gained units of the Air National Guard through 1969. This version of the aircraft was extensively used within the Semi Automatic Ground Environment (SAGE) air-defense system. [43] [44]
A total of 1,050 Scorpions of all variants were produced.
Data fromScorpion with a Nuclear Sting [70]
General characteristics
Performance
Armament
Avionics
Aircraft of comparable role, configuration, and era
Related lists
The Convair F-106 Delta Dart is an all-weather interceptor aircraft designed and produced by the American aircraft manufacturer Convair.
The General Dynamics F-111 Aardvark is a retired supersonic, medium-range, multirole combat aircraft. Production models of the F-111 had roles that included attack, strategic bombing, reconnaissance and electronic warfare. Aardvark comes from a South African animal that has a long nose and hugs the terrain. It is an Afrikaans word that translates literally as "earth pig"—hence the aircraft's "Pig" nickname during its Australian service.
The McDonnell F-101 Voodoo is a supersonic jet fighter designed and produced by the American McDonnell Aircraft Corporation.
The McDonnell XF-88 Voodoo was a long-range, twinjet fighter aircraft with swept wings designed for the United States Air Force. Although it never entered production, its design was adapted for the subsequent supersonic F-101 Voodoo.
The North American F-100 Super Sabre is an American supersonic jet fighter aircraft designed and produced by the aircraft manufacturer North American Aviation. The first of the Century Series of American jet fighters, it was the first United States Air Force (USAF) fighter capable of supersonic speed in level flight.
The Republic XF-91 Thunderceptor is a mixed-propulsion prototype interceptor aircraft, developed by Republic Aviation. The aircraft would use a jet engine for most flight, and a cluster of four small rocket engines for added thrust during climb and interception. The design was largely obsolete by the time it was completed due to the rapidly increasing performance of contemporary jet engines, and only two prototypes were built. One of these was the first American fighter to exceed Mach 1 in level flight.
The Convair F-102 Delta Dagger is an interceptor aircraft designed and produced by the American aircraft manufacturer Convair. A member of the Century Series, the F-102 was the first operational supersonic interceptor and delta-wing fighter operated by the United States Air Force (USAF).
The Northrop T-38 Talon is a two-seat, twinjet supersonic jet trainer designed and produced by the American aircraft manufacturer Northrop Corporation. It was the world's first supersonic trainer as well as the most produced.
The Lockheed F-94 Starfire is a first-generation jet powered all-weather day/night interceptor aircraft designed and produced by Lockheed Corporation. It was the first operational United States Air Force (USAF) fighter equipped with an afterburner as well as being the first jet-powered all-weather fighter to enter combat during the Korean War.
The Republic F-84 Thunderjet is an American turbojet fighter-bomber aircraft. Originating as a 1944 United States Army Air Forces (USAAF) proposal for a "day fighter", the F-84 first flew in 1946. Although it entered service in 1947, the Thunderjet was plagued by so many structural and engine problems that a 1948 U.S. Air Force review declared it unable to execute any aspect of its intended mission and considered canceling the program. The aircraft was not considered fully operational until the 1949 F-84D model and the design matured only with the definitive F-84G introduced in 1951. In 1954, the straight-wing Thunderjet was joined by the swept-wing F-84F Thunderstreak fighter and RF-84F Thunderflash photo reconnaissance aircraft.
The Northrop YF-17 was a prototype lightweight fighter aircraft designed by Northrop aviation for the United States Air Force's Lightweight Fighter (LWF) technology evaluation program. The LWF was initiated because many in the fighter community believed that aircraft like the F-15 Eagle were too large and expensive for many combat roles. The YF-17 was the culmination of a long line of Northrop designs, beginning with the N-102 Fang in 1956, continuing through the F-5 family.
The Curtiss-Wright XF-87 Blackhawk was a prototype American all-weather jet fighter-interceptor, and the company's last aircraft project. Designed as a replacement for the World War II–era propeller-driven P-61 Black Widow night/interceptor aircraft, the XF-87 lost in government procurement competition to the Northrop F-89 Scorpion. The loss of the contract was fatal to the company; the Curtiss-Wright Corporation closed down its aviation division, selling its assets to North American Aviation.
The Northrop YB-35/XB-35, Northrop designation N-9 or NS-9, were experimental heavy bomber aircraft developed by the Northrop Corporation for the United States Army Air Forces during and shortly after World War II. The airplane used the radical and potentially very efficient flying wing design, in which the tail section and fuselage are eliminated and all payload is carried in a thick wing. Only prototypes and pre-production aircraft were built, although interest remained strong enough to warrant further development of the design as a jet bomber, under the designation YB-49.
The Northrop YB-49 was an American prototype jet-powered heavy bomber developed by Northrop Corporation shortly after World War II for service with the United States Air Force. The YB-49 featured a flying wing design and was a turbojet-powered development of the earlier, piston-engined Northrop XB-35 and YB-35. The two YB-49s built were both converted YB-35 test aircraft.
The Convair XF-92 is an American, delta wing, first-generation jet prototype. Originally conceived as a point-defence interceptor, the design was later used purely for experimental purposes and only one was built. However, it led Convair to use the delta-wing on a number of designs, including the F-102 Delta Dagger, F-106 Delta Dart, B-58 Hustler, the US Navy's F2Y Sea Dart as well as the VTOL FY Pogo.
The Lockheed XF-90 was built in response to a United States Air Force requirement for a long-range penetration fighter and bomber escort. The same requirement produced the McDonnell XF-88 Voodoo. Lockheed received a contract for two prototype XP-90s. The design was developed by Willis Hawkins and the Skunk Works team under Kelly Johnson. Two prototypes were built. Developmental and political difficulties delayed the first flight until 3 June 1949, with Chief Test Pilot Tony LeVier at the controls. Embodying the experience gained in developing the P-80 Shooting Star, the XF-90 shared some design traits with the older Lockheed fighter, albeit with swept-wings; however, this latter design choice could not sufficiently make up for the project’s underpowered engines, and the XF-90 never entered production.
The General Electric/Allison J35 was the United States Air Force's first axial-flow compressor jet engine. Originally developed by General Electric in parallel with the Whittle-based centrifugal-flow J33, the J35 was a fairly simple turbojet, consisting of an eleven-stage axial-flow compressor and a single-stage turbine. With the afterburner, which most models carried, it produced a thrust of 7,400 lbf (33 kN).
The North American F-86D/K/L Sabre is an American transonic jet interceptor. Developed for the United States Air Force in the late 1940s, it was an interceptor derivative of the North American F-86 Sabre. While the original F-86 Sabre was conceived as a day fighter, the F-86D was specifically developed as an all-weather interceptor. Originally designated as the YF-95 during development and testing, it was re-designated the F-86D before production began, despite only sharing 25% commonality of parts with the original F-86. Production models of the F-86D/K/L differed from other Sabres in that they had a larger fuselage, a larger afterburning engine, and a distinctive nose radome. The most-produced Sabre Dog variants also mounted no guns, unlike the Sabre with its six M3 Browning .50 caliber machine guns, instead mounting unguided Folding-Fin Aerial Rocket (FFAR) “Mighty Mouse” rockets. The "K" and "L" Sabre Dog variants mounted four 20mm M24A1 cannon.
The Convair XB-53 was a proposed jet-powered medium bomber aircraft, designed by Convair for the United States Army Air Forces. With a radical tailless, forward-swept wing design, the aircraft appeared futuristic; however, the project was canceled before either of the two prototypes were completed.
The Republic F-84F Thunderstreak is an American swept-wing turbojet-powered fighter-bomber. The RF-84F Thunderflash was a photo reconnaissance version.