XP-58 Chain Lightning | |
---|---|
![]() | |
The sole completed XP-58 | |
Role | Heavy fighter |
Manufacturer | Lockheed |
First flight | 6 June 1944 |
Status | Canceled |
Number built | 1 |
Developed from | Lockheed P-38 Lightning |
The Lockheed XP-58 Chain Lightning was an American long-range fighter developed during World War II. Although derived from the successful P-38 Lightning, the XP-58 was plagued by technical problems with its engines that eventually led to the project's cancellation.
The XP-58 was a Lockheed Aircraft Company funded initiative to develop an improved Lightning as a long-range fighter following the release by the U.S. Army Air Corps of the Lightning for sale to Britain on 20 April 1940. Initially, two designs were formulated, both using the Continental IV-1430 engines. One would be a single-seat aircraft with one 20 mm (.79 in) cannon and four .50 in (12.7 mm) machine guns. The second would be a two-seat aircraft with the addition of a flexible .50 in (12.7 mm) gun at the end of each tail boom. [1]
In July 1940, Lockheed decided to switch to Pratt & Whitney XH-2600 engines as the aircraft would be underpowered with the Continental engines, with the aircraft having two seats and designated "XP-58". [1] However, soon Lockheed was advised the development of the XH-2600 engine was terminated. After consideration of the engine alternatives, the design was changed to use two Wright R-2160 Tornado engines, as well as a change of the rear-facing armament to two turrets, one upper and the other lower on the fuselage, each turret containing two .50 in (12.7 mm) machine guns. As support equipment for the two crewmen was added, the estimated weight of the XP-58 grew to 34,232 lb (15,527 kg) by August 1941. [2]
In March 1942, the USAAF placed an order for a second XP-58 that would incorporate increased fuel tanks to obtain a range of 3,000 mi (4,800 km). The Air Force was uncertain about the role and armament of the aircraft, and in September 1942, a decision was made to convert the aircraft for a role as a low-altitude attack aircraft, armed with a 75 mm (2.95 in) M5 autocannon. Adequate aircraft were already available for this mission, with the Douglas A-26 Invader and Beechcraft XA-38 Grizzly under development. As a result, the second XP-58 was canceled and the role of the design reverted to that of a high-altitude fighter, using large-bore cannon firing high-explosive shells to break up bomber formations. [3] [4]
The 37 mm (1.46 in) M4 autocannon was originally selected for a quadruple mount in the nose, but the trajectory of the 37mm shells dropped lower than other weaponry, limiting its effective range. A hydraulically articulated nose that could be bent up to correct this problem was tried, but was dismissed as too complex. Then, a 75 mm (2.95 in) M5 autocannon paired with twin .5 in (12.7 mm) machine guns was tried and proved much more successful.
In January 1943, the USAAF initiated a separate program to build a dedicated photographic reconnaissance aircraft with superior range, altitude and speed characteristics, as the loss of air bases in China had placed strategic targets in Japan beyond the range of almost all existing Allied aircraft, and some USAAF leaders objected to diverting bombers such as the B-29 to serve in a pure reconnaissance role. Lockheed proposed a modified version of the XP-58. [5] However, in August 1943, General Henry H. Arnold chose the Hughes XF-11 over the Lockheed against the recommendations of Air Materiel Command, which said that Hughes Aircraft lacked the expertise and industrial capacity for mass production. The XF-11 would be plagued by technical and managerial delays and never entered service; Arnold later publicly expressed regret for his decision. [6] [7] The Northrop F-15 Reporter, a development of the P-61 Black Widow, would enter service in this role.
In February 1943, use of another engine, the Allison V-3420, was necessary due to poor progress with the Tornado engine development. With this change, the second XP-58 was resurrected. The XP-58 had its first flight on 6 June 1944, but flight test work on the XP-58 took second place to other higher priority developments. Eventually, 25 test flights were completed. The XP-58 was then flown to Wright Field for USAAF acceptance tests, even though the turbo-superchargers were experiencing torching and a number of systems were not installed including provision for cockpit pressurization and armament with its fire-control equipment. Although the prototype arrived at Wright Field on 22 October 1944, the aircraft was a maintenance headache and no further trials were conducted. The construction of the second prototype was abandoned.
Data fromLockheed Aircraft since 1913 [8]
General characteristics
Performance
Armament
Aircraft of comparable role, configuration, and era
Related lists
The Lockheed P-38 Lightning is an American single-seat, twin piston-engined fighter aircraft that was used during World War II. Developed for the United States Army Air Corps (USAAC) by the Lockheed Corporation, the P-38 incorporated a distinctive twin-boom design with a central nacelle containing the cockpit and armament. Along with its use as a general fighter, the P-38 was used in various aerial combat roles, including as a highly effective fighter-bomber, a night fighter, and a long-range escort fighter when equipped with drop tanks. The P-38 was also used as a bomber-pathfinder, guiding streams of medium and heavy bombers, or even other P-38s equipped with bombs, to their targets. Used in the aerial reconnaissance role, the P-38 accounted for 90 percent of American aerial film captured over Europe. Although it was not designated a heavy fighter or a bomber destroyer by the USAAC, the P-38 filled those roles and more; unlike German heavy fighters crewed by two or three airmen, the P-38 with its lone pilot was nimble enough to compete with single-engine fighters.
A heavy fighter is a historic category of fighter aircraft produced in the 1930s and 1940s, designed to carry heavier weapons or operate at longer ranges than light fighter aircraft. To achieve performance, most heavy fighters were twin-engine, and many had multi-place crews; this was in contrast to light fighters, which were typically single-engine and single-crew aircraft. In Germany, these larger fighters were known as Zerstörer ("destroyers").
The Northrop F-89 Scorpion is an all-weather, twin-engined interceptor aircraft designed and produced by the American aircraft manufacturer Northrop Corporation. It was the first jet-powered aircraft to be designed for the interceptor role from the outset to enter service, as well as the first combat aircraft to be armed with air-to-air nuclear weapons in the form of the unguided Genie rocket. The name Scorpion came from the aircraft's elevated tail unit and high-mounted horizontal stabilizer, which kept it clear of the engine exhaust.
The Curtiss-Wright XP-55 Ascender is a 1940s United States prototype fighter aircraft built by Curtiss-Wright. Along with the Vultee XP-54 and Northrop XP-56, it resulted from United States Army Air Corps proposal R-40C issued on 27 November 1939 for aircraft with improved performance, armament, and pilot visibility over existing fighters; it specifically allowed for unconventional aircraft designs. An unusual design for its time, it had a canard configuration with a rear-mounted engine, and two vertical tails at end of swept wings. Because of its pusher design, it was satirically referred to as the "Ass-ender". Like the XP-54, the Ascender was designed for the 1,800 hp Pratt & Whitney X-1800 24-Cylinder H-engine, but was redesigned after that engine project was canceled. It was also the first Curtiss fighter aircraft to use tricycle landing gear.
The Mitsubishi Ki-67Hiryū was a twin-engine bomber produced by Mitsubishi Aircraft Company and used by the Imperial Japanese Army Air Service and Imperial Japanese Navy Air Service in World War II. While its original official designation was "Army Type 4 Heavy Bomber", in all of its key parameters, the Ki-67 was similar to the contemporaneous medium bombers of other countries. Japanese Navy variants included the P2M and Q2M.
The HS.404 is an autocannon originally designed by and produced by the Swiss arm of the Spanish/Swiss company Hispano-Suiza in the mid-1930s. Production was later moved to the French arm of Hispano-Suiza.
The Curtiss XP-62 was a prototype single-engine interceptor aircraft, that was built for the United States Army Air Forces, by the Curtiss-Wright Corporation. It first flew in 1943.
The Fisher P-75 Eagle was an American fighter aircraft designed by the Fisher Body Division of General Motors. Development started in September 1942 in response to United States Army Air Forces requirement for a fighter possessing an extremely high rate of climb, using the most powerful liquid-cooled engine then available, the Allison V-3420. The program was cancelled after only a small number of prototypes and production aircraft had been completed, as it was no longer required in its original role, could not be quickly deployed, and possessed no significant advantages over aircraft already in production.
The Grumman XP-50 was a land-based development of the shipboard XF5F-1 Skyrocket fighter, entered into a United States Army Air Corps (USAAC) contest for a twin-engine heavy interceptor aircraft. The USAAC placed an order for a prototype on 25 November 1939, designating it XP-50, but it lost the competition to the Lockheed XP-49.
The McDonnell XP-67 "Bat" or "Moonbat" was a prototype for a twin-engine, long-range, single-seat interceptor aircraft for the United States Army Air Forces. Although the design was conceptually advanced, it was beset by numerous problems and never approached its anticipated level of performance. The project was cancelled after the sole completed prototype was destroyed by an engine fire.
The Lockheed XP-49 was an advancement on the P-38 Lightning for a fighter in response to U.S. Army Air Corps proposal 39-775. Intended to use the new 24-cylinder Pratt & Whitney X-1800 engine, this proposal, which was for an aircraft substantially similar to the P-38, was assigned the designation XP-49, while the competing Grumman Model G-46 was awarded second place and designated XP-50.
The Republic XP-72 was an American prototype fighter-interceptor developed by Republic Aircraft as a progression of the P-47 Thunderbolt design. The XP-72 was designed around the Pratt & Whitney R-4360 Wasp Major 28-cylinder air-cooled radial engine with a supercharger mounted behind the pilot and driven by an extension shaft from the engine. The armament consisted of six .50 caliber (12.7 mm) wing-mounted Browning AN/M2 machine guns and underwing racks for two 1,000 lb bombs; Alternative armament packages included two 37 mm M4 autocannons with four .50 caliber AN/M2s, or four M4 autocannons.
The Vultee XP-54 Swoose Goose was a prototype fighter built by the Vultee Aircraft Company for the United States Army Air Forces (USAAF).
The Curtiss XP-71 was a 1941 American proposal for an exceptionally large heavy fighter design. It was intended to serve as an extreme-range interceptor and escort fighter. While significant progress was made in the design phase, no prototypes were ever built, and the design was abandoned in 1943.
The Vultee XP-68 Tornado was a proposed American World War II-era high-altitude interceptor aircraft. It was based on the experimental XP-54 Swoose Goose and powered by the Wright R-2160 Tornado 42-cylinder radial engine driving a set of contra-rotating propellers in a twin-boom pusher configuration. When the engine was cancelled on 22 November 1941, the XP-68 was also cancelled.
The Hughes D-2 was an American fighter and bomber project begun by Howard Hughes as a private venture. It never proceeded past the flight testing phase but was the predecessor of the Hughes XF-11. The sole D-2 was completed in 1942–1943.
The Mitsubishi Ki-83 (キ83) was a Japanese experimental long range heavy fighter designed near the end of World War II. It did not reach production status.
The Lockheed L-133 was an exotic design started in 1939 which was proposed to be the first jet fighter of the United States Army Air Forces (USAAF) during World War II. The radical design was to be powered by two axial-flow turbojets with an unusual blended wing-body canard design capable of 612 mph (985 km/h) in level flight. The USAAF rejected the 1942 proposal, but the effort speeded the development of the USAAF's first successful operational jet fighter, the P-80 Shooting Star, which did see limited service near the end of war. The P-80 was a less radical design with a single British-based Allison J33 engine, with a conventional tail.
The Hughes XF-11 was a prototype military reconnaissance aircraft designed and flown by Howard Hughes and built by Hughes Aircraft Company for the United States Army Air Forces (USAAF). Although 100 F-11s were ordered in 1943, the program was delayed beyond the end of World War II, rendering the aircraft surplus to USAAF requirements; the production contract was canceled and only two prototypes were completed. During the first XF-11 flight in 1946, piloted by Hughes, the aircraft crashed in Beverly Hills, California, and was destroyed, critically injuring him. The second prototype first flew in 1947 but was used only briefly for testing before being scrapped in 1949. The program was controversial from the beginning, leading the United States Senate to investigate the XF-11 and the Hughes H-4 Hercules flying boat in 1946–1947.
The Mitsubishi J4M Senden or Navy Experimental 17-Shi Otsu B Type Interceptor Fighter Senden, Allied reporting name Luke, was a Japanese World War II fighter aircraft proposed by Mitsubishi Heavy Industries for use by the Imperial Japanese Navy. The J4M project did not proceed beyond the design stage.