P-12 / F4B | |
---|---|
General information | |
Type | Fighter aircraft |
Manufacturer | Boeing Aircraft Company |
Primary users | United States Army Air Corps |
Number built | 586 [1]
|
History | |
Manufactured | 1929–1932 |
Introduction date | 1930 |
First flight | 25 June 1928 |
Retired | 1949 (Brazilian Air Force) [2] |
The Boeing P-12 or Boeing F4B is an American pursuit aircraft that was operated by the United States Army Air Corps, United States Marine Corps, and United States Navy. It was the chief fighter aircraft in American service during the early 1930s but also used internationally. By the late 1930s it was replaced in front-line duty by newer designs, but it was still used for training into the early 1940s. Many variants of the aircraft were developed. In the 21st century a handful of surviving air frames are on display in museums.
Developed as a private venture to replace the Boeing F2B and F3B with the United States Navy, the Boeing Model 99 first flew on 25 June 1928. The new aircraft was smaller, lighter and more agile than the ones it replaced but still used the Wasp engine of the F3B. This resulted in a higher top speed and overall better performance. As result of Navy evaluation 27 were ordered as the F4B-1; later evaluation by the United States Army Air Corps resulted in orders with the designation P-12. Boeing supplied the USAAC with 366 P-12s between 1929 and 1932. Production of all variants totaled 586.
F4B-1 (Boeing Model 99)
The F4B-1 was built using typical construction techniques of the day with a welded truss fuselage with formers and longerons to define the aerodynamic shape. Wings were of wood construction [3] and covered by fabric. Ailerons were tapered, with corrugated aluminum covering. The Pratt & Whitney R-1340 nine-cylinder radial engine was uncowled and sported prominent cooling fairings behind each cylinder which were later removed in service.
F4B-2 (Boeing Model 223)
The F4B-2 was similar to the F4B-1 but incorporated a Townend ring cowling around the engine. The prominent cooling fairings behind each cylinder were not incorporated on this model. A spreader bar was incorporated between the landing wheels and the tail skid was replaced by a castoring tailwheel. Finally, the tapered ailerons were replaced by constant chord Frise ailerons. A total of 46 production F4B-2s were built. Bureau numbers included A-6813 through A8639 and A-8791 through A-8809. Some F4B-2s received F4B-4 style vertical fins and rudders to address poor directional stability.
F4B-3 (Boeing Model 235)
The F4B-3 represented a significant departure in design from the earlier versions of the F4B. While the F4B-1 and F4B-2 had fuselages constructed of welded steel tube truss, the F4B-3 used a combination of welded truss and semi-monocoque construction. From the engine mount aft to the rear of the fuel tank bay, the structure was welded steel truss, while the fuselage aft of the fuel tank bay was constructed of stressed skin, semi-monocoque aluminum alloy. Wings were constructed primarily of wood and covered in fabric. The F4B-3 was powered by a single-row, nine-cylinder Pratt & Whitney R-1340-D engine generating 500 hp. It had an internal supercharger and turned a 9 ft. two-blade Hamilton Standard propeller. The original configuration of the F4B-3 has a headrest fairing similar to the P-12E, but most were retrofitted with a headrest fairing capable of storing a liferaft. This later headrest fairing design was carried over to the F4B-4.
F4B-4 (Boeing Model 235)
The F4B-4 was nearly identical to the F4B-3, but incorporated a larger vertical fin to address the directional stability issues that plagued the F4B from its inception. The design was so similar to the F4B-3 that both aircraft had the same Boeing Model Number (235). The first nine aircraft (A-8912-8920) featured the same carburetor induction scheme as the F4B-3, but all following aircraft (A-8009-A-9053, 9226-9263 and 9719) featured a single oval carburetor intake on the port side only.
F4B-5
A detailed specification was written for an F4B-5 as a minor development of the F4B-4 but was not proceeded with.
U.S. Army Air Corps
P-12s were flown by the 17th Pursuit Group (34th, 73rd, and 95th Pursuit Squadrons) at March Field, California, and the 20th Pursuit Group (55th, 77th and 79th Pursuit Squadrons) at Barksdale Field, Louisiana. Older P-12s were used by groups overseas: the 4th Composite Group (3rd Pursuit Squadron) in the Philippines, the 16th Pursuit Group (24th, 29th, 74th, and 79th Pursuit Squadrons) in the Canal Zone, and the 18th Pursuit Group (6th and 19th Pursuit Squadrons) in Hawaii.
The P-12 remained in service with first-line pursuit groups until replaced by Boeing P-26s in 1934–1935. Survivors were relegated to training duties until 1941, when most were grounded and assigned to mechanic's schools. 23 P-12Cs, P-12Ds and P-12Es were transferred to the Navy for use as advanced trainers. Bureau numbers were 2489 through 2511. These aircraft were redesignated as F4B-4As.
U.S. Marine Corps
F4Bs were flown by two Marine squadrons. VF-10M flew F4B-4s from February to July 1933. In June 1933, the squadron mission changed from Fighting to Bombing and was redesignated as VB-4M. By direction of MAJ Roy S. Gieger, Officer-in-Charge of Marine Corps Aviation, all VF-10M F4B-4s on strength be transferred to VF-9M at Quantico. By September 1933, VB-4M had been re-equipped with 16 F4B-3s.
VF-9M based at Brown Field, Quantico flew F4B-4s, starting the transition in September 1932. In June 1933, VF-9M received all of the F4B-4s transferred from VF-10M. VF-9M flew their F4B-4s until 1938 when they were replaced by Grumman F3F-2s.
A single F4B-3 (BuNo) 8911 was assigned to Headquarters, U.S. Marine Corps and was the personal aircraft of Col. Ross “Rusty” Rowell, Director of Marine Corps Aviation.
The production runs are shown below with the P-12 designations for Army aircraft and the F4B designations being for the Navy. The remaining aircraft are civilian or export.
Number built | Model | Engine | Modifications |
---|---|---|---|
9 | P-12 | R-1340-7 | |
90 | P-12B | R-1340-9 | NACA cowl, shorter landing gear, larger wheels |
96 | P-12C | ring cowl, spreader-bar landing gear | |
35 | P-12D | R-1340-17 | |
110 | P-12E | semi-monocoque metal fuselage, redesigned vertical tail, some with tailwheels replacing skids | |
25 | P-12F | R-1340-19 | |
27 | F4B-1 | split axle landing gear, ventral bomb rack | |
46 | F4B-2 | spreader bar landing gear, frise ailerons, tailwheel replacing skid | |
21 | F4B-3 | Boeing Model 235, semi-monocoque metal fuselage | |
92 | F4B-4 | R-1340-16 | redesigned vertical tail, underwing racks (two 116 lb bombs), last 45 had mod. headrest w/life raft |
5 | 100/100A | (civilian version of F4B-1) | |
14 | 256 | (F4B-4, export to Brazil) | |
9 | 267 | (F4B-3 fuselage/P-12E wings, export to Brazil) |
Data from [29]
General characteristics
Performance
Armament
Related lists
The Boeing P-26 "Peashooter" is the first American production all-metal fighter aircraft and the first pursuit monoplane to enter squadron service with the United States Army Air Corps. Designed and built by Boeing, the prototype first flew in 1932, and the type was still in use with the U.S. Army Air Corps as late as 1941 in the Philippines. There are two surviving Peashooters and three reproductions on display, with two more under construction.
The Curtiss Falcon was a family of military biplane aircraft built by the American aircraft manufacturer Curtiss Aeroplane and Motor Company during the 1920s. Most saw service as part of the United States Army Air Corps as observation aircraft with the designations O-1 and O-11, or as the attack aircraft designated the A-3 Falcon.
The Stearman (Boeing) Model 75 is an American biplane formerly used as a military trainer aircraft, of which at least 10,626 were built in the United States during the 1930s and 1940s. Stearman Aircraft became a subsidiary of Boeing in 1934. Widely known as the Stearman, Boeing Stearman, or Kaydet, it served as a primary trainer for the United States Army Air Forces, the United States Navy, and with the Royal Canadian Air Force as the Kaydet throughout World War II. After the conflict was over, thousands of surplus aircraft were sold on the civilian market. In the immediate postwar years, they became popular as crop dusters and sports planes, and for aerobatic and wing walking use in air shows.
The Curtiss SBC Helldiver was a two-seat scout bomber and dive bomber built by the Curtiss-Wright Corporation. It was the last combat military biplane procured by the United States Navy. Delivered in 1937, it became obsolete even before World War II and was kept well away from combat with Axis fighters.
The Grumman F3F is a biplane fighter aircraft produced by the Grumman aircraft for the United States Navy during the mid-1930s. Designed as an improvement on the F2F, it entered service in 1936 as the last biplane to be delivered to any American military air arm. It was retired from front line squadrons at the end of 1941 before it could serve in World War II, and replaced by the Brewster F2A Buffalo. The F3F, which inherited the Leroy Grumman-designed retractable main landing gear configuration first used on the Grumman FF, served as the basis for a biplane design ultimately developed into the much more successful F4F Wildcat that succeeded the subpar Buffalo.
The Grumman FF "Fifi" was an American biplane fighter aircraft operated by the United States Navy during the 1930s. It was the first carrier aircraft with retractable landing gear. It was produced under licence in Canada and known as the Goblin in Canadian service and Delfín in Spanish service.
The Curtiss P-6 Hawk is an American single-engine biplane fighter introduced into service in the late 1920s with the United States Army Air Corps and operated until the late 1930s prior to the outbreak of World War II.
The North American BT-9 was the United States Army Air Corps (USAAC) designation for a low-wing single engine monoplane primary trainer aircraft that served before and during World War II.
The P-1 Hawk was a 1920s open-cockpit biplane fighter aircraft of the United States Army Air Corps. An earlier variant of the same aircraft had been designated PW-8 prior to 1925.
The Boeing YB-9 was the first all-metal monoplane bomber aircraft designed for the United States Army Air Corps. The YB-9 was a much enlarged twin-engine development of Boeing's single-engine Model 200 Monomail commercial transport.
The Airco DH.4 is a British two-seat biplane day bomber of the First World War. It was designed by Geoffrey de Havilland for Airco, and was the first British two-seat light day-bomber capable of defending itself.
The Consolidated P-30 (PB-2) was a 1930s United States two-seat fighter aircraft. An attack version called the A-11 was also built, along with 2 Y1P-25 prototypes and YP-27, Y1P-28, and XP-33 proposals. The P-30 is significant for being the first fighter in United States Army Air Corps service to have retractable landing gear, an enclosed and heated cockpit for the pilot, and an exhaust-driven turbo-supercharger for altitude operation.
The Boeing Model 15 was a United States single-seat open-cockpit biplane fighter aircraft of the 1920s, manufactured by the Boeing company. The Model 15 saw service with the United States Army Air Service and with the United States Navy as a carrier-based fighter.
The Boeing F2B was a biplane fighter aircraft of the United States Navy in the 1920s, familiar to aviation enthusiasts of the era as the craft of the Three Sea Hawks aerobatic flying team, famous for its tied-together formation flying.
The Boeing F3B was a biplane fighter and fighter bomber that served with the United States Navy from 1928 into the early 1930s.
The Curtiss F6C Hawk was a late 1920s American naval biplane fighter aircraft. It was part of the long line of Curtiss Hawk airplanes built by the Curtiss Aeroplane and Motor Company for the American military.
The Curtiss F7C Seahawk was a carrier-capable biplane fighter aircraft of the United States Navy Marine Corps in the late 1920s and early 1930s.
The Boeing Model 40 is a United States mail plane of the 1920s. It was a single-engined biplane that was widely used for airmail services in the United States in the 1920s and 1930s, especially by airlines that later became part of United Airlines. It became the first aircraft built by the Boeing company to carry passengers.
The Boeing P-29 and XF7B-1 were an attempt to produce a more advanced version of the highly successful P-26. Although slight gains were made in performance, the U.S. Army Air Corps and U.S. Navy did not order the aircraft.
The Boeing Model 95 was a single engine biplane mailplane built by Boeing in the United States in the late 1920s to supplement the Boeing Model 40s being used on Boeing's airmail routes.