Culver PQ-10

Last updated
PQ-10
Culver XPQ-10 2-view line drawing.jpg
Role Target drone
National origin Culver Aircraft Company
Primary user United States Army Air Forces
Number built0
Developed from Culver Model MR

The Culver PQ-10 was an American target drone, designed by the Culver Aircraft Company for use by the United States Army Air Forces. Designed in 1941, the project was cancelled before any aircraft flew.

Contents

Design and development

The prototype XPQ-10 was ordered by the United States Army Air Forces in 1941. Derived from the civilian Culver Model MR, the XPQ-10 was a high-wing monoplane equipped with twin Franklin O-300 engines and a fixed tricycle landing gear. [1] Plans were made for the production of PQ-10 series aircraft; however, before the XPQ-10 was completed, the project was cancelled. [2]

Specifications (XPQ-10)

Data from Parsch [1]

General characteristics

See also

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

<span class="mw-page-title-main">Culver Cadet</span>

The Culver Cadet is an American two-seat light monoplane aircraft, also as a radio-controlled drone, produced by the Culver Aircraft Company.

<span class="mw-page-title-main">Culver PQ-14 Cadet</span>

The Culver PQ-14 Cadet is a modified version of the Culver LFA Cadet used as a target drone.

The Fletcher FBT-2 was a military trainer aircraft built in the United States in the early 1940s. Although it was never entered production as a trainer, it was ordered in small numbers as a target drone but when that was cancelled played a small part in the development of guided bombs.

<span class="mw-page-title-main">Interstate XBDR</span> Type of aircraft

The Interstate XBDR was a design for an assault drone - an early television-guided missile - powered by two jet engines, that was designed by the Interstate Aircraft and Engineering Corporation during the latter stages of the Second World War for use by the United States Navy. Wind tunnel tests of a scale model were conducted, however no full-scale examples of the aircraft were built before the project was cancelled.

<span class="mw-page-title-main">North American MQM-42</span> Type of aircraft

The MQM-42 was a supersonic target drone developed by North American Aviation. Developed in two subvariants, Redhead and Roadrunner, it was used by the United States Army in the 1960s and 1970s.

<span class="mw-page-title-main">Fairchild BQ-3</span> Type of aircraft

The Fairchild BQ-3, also known as the Model 79, was an early expendable unmanned aerial vehicle – referred to at the time as an "assault drone" – developed by Fairchild Aircraft from the company's AT-21 Gunner advanced trainer during the Second World War for use by the United States Army Air Forces. Two examples of the type were built and flight-tested, but the progress of guided missiles rendered the assault drone quickly obsolete, and the type was not produced.

<span class="mw-page-title-main">Culver Aircraft Company</span>

The Culver Aircraft Company was an American aircraft manufacturer of light aircraft of the 1930s and 1940s.

<span class="mw-page-title-main">Interstate TDR</span> UCAV created in 1944, used by the US Navy

The Interstate TDR was an early unmanned combat aerial vehicle — referred to at the time as an "assault drone" — developed by the Interstate Aircraft and Engineering Corporation during the Second World War for use by the United States Navy. Capable of being armed with bombs or torpedoes, 2000 aircraft were ordered, but only around 200 were built. The type saw some service in the Pacific Theater against the Japanese, but continuing developmental issues affecting the aircraft, along with the success of operations using more conventional weapons, led to the decision being made to cancel the assault drone program in October 1944.

<span class="mw-page-title-main">Naval Aircraft Factory TDN</span> Type of aircraft

The Naval Aircraft Factory TDN was an early unmanned combat aerial vehicle - referred to at the time as an "assault drone" - developed by the United States Navy's Naval Aircraft Factory during the Second World War. Developed and tested during 1942 and 1943, the design proved moderately successful, but development of improved drones saw the TDN-1 relegated to second-line duties, and none were used in operational service.

<span class="mw-page-title-main">Radioplane RP-77</span> Target drone

The Radioplane RP-77 was a small target drone missile, constructed largely of plastic materials, produced by the Radioplane division of the Northrop Corporation. Although the RP-77D was successfully tested by the United States Army, the decision was made not to procure the aircraft.

<span class="mw-page-title-main">Fleetwings PQ-12</span> 1940s American target drone

The Fleetwings PQ-12 , company designation Fleetwings Model 36, was a 1940s American manned aerial-target designed and built by Fleetwings for the United States Army Air Corps.

<span class="mw-page-title-main">Fleetwings BQ-1</span> 1940s American unmanned aerial vehicle

The Fleetwings BQ-1 was an early expendable unmanned aerial vehicle — referred to at the time as an "assault drone" — developed by Fleetwings during the Second World War for use by the United States Army Air Forces. Only a single example of the type was built, the program being cancelled following the crash of the prototype on its first flight.

<span class="mw-page-title-main">Fleetwings BQ-2</span> 1940s American unmanned aerial vehicle

The Fleetwings BQ-2 was an early expendable unmanned aerial vehicle — referred to at the time as an "assault drone" — developed by Fleetwings during the Second World War for use by the United States Army Air Forces. Only a single example of the type was built; the aircraft was deemed too expensive for service and was cancelled after a brief flight testing career.

The Franklin O-300 was an American air-cooled aircraft engine of the early 1940s. The engine was of six-cylinder, horizontally-opposed layout and displaced 300 cu in (5 L). The power output ranged between 130 hp (97 kW) and 175 hp (130 kW) depending on variant. The 6ACG-298 featured a geared propeller drive.

<span class="mw-page-title-main">Culver XPQ-15</span> American target drone

The Culver XPQ-15, also known as the XTD3C-1, was an American target drone developed by the Culver Aircraft Company late in World War II.

<span class="mw-page-title-main">SAM-A-1 GAPA</span> Surface-to-air missile

The Ground-to-Air Pilotless Aircraft (GAPA) was a short-range surface-to-air missile (SAM) developed in the late 1940s by Boeing for the United States Army Air Forces, and then the United States Air Force after 1948. It was given the reference number SAM-A-1, the first Surface-to-Air Missile (SAM) in the 1947 tri-service designation system. By 1950, over 100 test rockets had been launched using a variety of configurations and power plants, with one launch in 1949 setting the altitude record for a ramjet powered vehicle at 59,000 ft (18,000 m).

The Frankfort OQ-16, also known as the TD3D, was a target drone designed by the Frankfort Sailplane Company for use by the United States Army Air Forces and United States Navy.

<span class="mw-page-title-main">Radioplane OQ-17</span> 1940s American target drone

The Radioplane OQ-17 was a target drone produced by the Radioplane Company for the United States Army Air Forces and, as the TD4D/KDR Quail, the United States Navy. Suffering from an unreliable engine, the OQ-17 production run was cut short in favor of the OQ-19.

The Radioplane OQ-6 was a target drone developed by the Radioplane Company under the designation RP-14 and evaluated by the United States Army Air Forces for service use. A small number were procured, but major production contracts were cancelled by the end of World War II.

The Republic SD-4 Swallow was an early high-speed reconnaissance drone developed by Republic Aviation for the United States Army. Intended for use by the U.S. Army Signal Corps to target tactical ballistic missiles, it was cancelled before the first prototype could be completed, and did not see operational service.

References

Citations
  1. 1 2 Parsch 2009
  2. Juptner 1993, p.170.
Bibliography