| Cadet / PQ-8 | |
|---|---|
 Culver LCA Cadet | |
| General information | |
| Type | Two-seat light monoplane |
| National origin | United States |
| Manufacturer | Culver Aircraft Company |
| Designer | |
| Number built | 600+ |
| History | |
| First flight | 1939 |
| Variants | Culver PQ-14 Cadet |
The Culver Cadet is an American two-seat light monoplane aircraft, also as a radio-controlled drone, produced by the Culver Aircraft Company.
The aircraft designer Al Mooney developed an improved version of the Culver Dart, to provide improved performance with a smaller engine. Originally designated the Culver Model L, the prototype first flew on 2 December 1939. The aircraft was named the Culver Cadet. Although similar to the previous Dart, the Cadet had a semi-monocoque fuselage instead of welded-steel-tube, and a retractable tailwheel undercarriage. The first variant (the Cadet LCA) was powered by a 75 hp (56 kW) Continental A75-8 four-cylinder horizontally-opposed piston engine.
The 1941 version was designated the Cadet LFA, introducing a number of refinements and more equipment, and was fitted with a 90 hp (67 kW) Franklin engine. Production was brought to an end after the United States entered World War II in December 1941, but the Cadet had found export orders, including to Uruguay, and had a new military role.
The Cadet was one of six models that Al Mooney designed during his eight years at Culver. He would leave to found Mooney Aircraft.
In 1940, the Cadet LCA was selected by the United States Army Air Corps as being suitable for use as a radio-controlled target. The first aircraft was designated the Culver A-8 (later the XPQ-8) and was based on the Cadet LFA, but had fixed tricycle landing gear. After successful tests, a production order for 200 was placed, and designated the PQ-8. Later, another 200 were ordered with a more powerful engine as the PQ-8A. In late 1941, the United States Navy acquired a PQ-8A for evaluation, and then ordered 200 in 1941 as the TDC-2. An enlarged and improved version was later built as the Culver PQ-14.
Several Cadets, with both military and civilian origins, are still (2012) airworthy in the United States, and some are preserved in airworthy condition by museums.
United States 
Data from U.S. Civil Aircraft Vol. 8 [18]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
The Stinson L-13 is a US military utility aircraft first flown in 1945.
The Curtiss Robin, introduced in 1928, is an American high-wing monoplane built by the Curtiss-Robertson Airplane Manufacturing Company. The J-1 version was flown by Wrongway Corrigan who crossed the Atlantic after being refused permission to do so.
The Bell 47 is a single-rotor single-engine light helicopter manufactured by Bell Helicopter. It was based on the third Bell 30 prototype, which was the company's first helicopter designed by Arthur M. Young. The 47 became the first helicopter certified for civilian use on 8 March 1946. The first civilian delivery was made on 31 December 1946 to Helicopter Air Transport. More than 5,600 Bell 47s were produced, including those under license by Agusta in Italy, Kawasaki Heavy Industries in Japan, and Westland Aircraft in the United Kingdom. The Bell 47J Ranger is a modified version with a fully enclosed cabin and tail boom.
The Fairchild Model 24, also called the Fairchild Model 24 Argus and UC-61 Forwarder, is a four-seat, single-engine monoplane light transport aircraft designed by the Fairchild Aviation Corporation in the 1930s. It was adopted by the United States Army Air Corps as UC-61 and also by the Royal Air Force. The Model 24 was itself a development of previous Fairchild models and became a successful civil and military utility aircraft.
The 1911 Curtiss Model D is an early United States pusher aircraft with the engine and propeller behind the pilot's seat. It was among the first aircraft in the world to be built in any quantity, during an era of trial-and-error development and equally important parallel technical development in internal combustion engine technologies.
The Taylor Cub was originally designed by C. Gilbert Taylor as a small, light and simple utility aircraft, evolved from the Taylor Chummy. It is the forefather of the popular Piper J-3 Cub, and total production of the Cub series was 23,512 aircraft.
The Aeronca L-3 group of observation and liaison aircraft were used by the United States Army Air Corps in World War II. The L-3 series were adapted from Aeronca's pre-war Tandem Trainer and Chief models.
The Alexander Eaglerock was a biplane produced in the United States in the 1920s by Alexander Aircraft Company of Colorado Springs, Colorado.
The Aeronca C-2 is an American light monoplane designed by Jean A. Roche and built by Aeronca Aircraft.
The Interstate Cadet is an American two-seat tandem, high wing, single-engine monoplane light aircraft. Around 320 of these aircraft were produced between the years 1941 and 1942 by the Interstate Aircraft and Engineering Corporation based in El Segundo, California. The construction techniques employed were a welded steel tube fuselage, wood (spruce) wing structure with metal ribs, and fabric covering, all of which were fairly standard in the 1940s.
The Aeronca Model K Scout is an American light airplane first marketed in 1937, and was the true successor to the popular C-2/C-3 line.
The Franklin O-200 was an American air-cooled aircraft engine of the early 1940s. The engine was of four-cylinder, horizontally-opposed layout and displaced 200 cu in (3 L). The power output ranged between 65 hp (48 kW) and 100 hp (75 kW) depending on variant. The O-200-5 (4ACG-199) featured a geared propeller drive.
The Culver PQ-14 Cadet is a modified version of the Culver LFA Cadet used as a target drone.
The Travel Air 6000 is a six-seat utility aircraft manufactured in the United States in the late 1920s.
The Meyers OTW was a 1930s United States training biplane designed by Allen Meyers and built by his Meyers Aircraft Company from 1936 to 1944.
The Stearman Model 6 Cloudboy was a 1930s American training biplane designed and built by the Stearman Aircraft Company of Wichita, Kansas.
The Standard J is a two-seat basic trainer two-bay biplane produced in the United States from 1916 to 1918, powered by a four-cylinder inline Hall-Scott A-7a engine. It was constructed from wood with wire bracing and fabric covering. The J-1 was built as a stopgap to supplement the Curtiss JN-4 in production.
The Historic Aircraft Restoration Museum, located at Creve Coeur Airport in Maryland Heights, Missouri, United States, is dedicated to restoring and preserving historical aircraft. The airplanes in the collection are all fabric-covered, and most are biplanes from the inter-war years. The museum's volunteers maintain most of these aircraft in full working order.
The Airpower Museum is a 20,000-square-foot (1,900 m2) aviation museum located near Blakesburg, Iowa on Antique Airfield. The Airpower Museum was founded by Robert L. Taylor and the Antique Airplane Association in 1965 and features various periods of aviation through models, engines, propellers, photos and original art. Approximately 25 aircraft are on display, including warbirds from World War II.
The Culver Aircraft Company was an American aircraft manufacturer of light aircraft of the 1930s and 1940s.
