Boeing 247 | |
---|---|
General information | |
Type | Passenger airliner |
National origin | United States |
Manufacturer | Boeing |
Status | Retired |
Primary user | Boeing Air Transport |
Number built | 75 [1] |
History | |
Introduction date | May 22, 1933 [2] |
First flight | February 8, 1933 |
The Boeing Model 247 is an early American airliner, and one of the first such aircraft to incorporate advances such as all-metal (anodized aluminum) semimonocoque construction, a fully cantilevered wing, and retractable landing gear. [3] [4] Other advanced features included control surface trim tabs, an autopilot and de-icing boots for the wings and tailplane. [5] The 247 first flew on February 8, 1933, and entered service later that year. [6]
Boeing introduced a host of aerodynamic and technical features into a new commercial airliner building on work with the earlier Monomail (Models 200, 221, 221A) mailplanes and B-9 bomber designs. The Boeing 247 was faster than the best U.S. fighter of its day, the open-cockpit biplane Boeing P-12. [7] The low landing speed of 62 mph (100 km/h) avoided the need for flaps, and pilots learned that at speeds as low as 10 mph (16 km/h), the 247 could be taxied "tail high" for ease of ground handling. [8]
The 247 could fly on one engine. With controllable-pitch propellers, the 247 could maintain 11,500 ft (3,500 m) at maximum gross weight on one engine. [9] Aside from its size, much lower wing loading, and the wing spar obstructing the cabin, many of its features became the norm for airliners, including the Douglas DC-1, before World War II. [6] Originally planned as a 14-passenger airliner powered by Pratt & Whitney R-1690 Hornet radial engines, the preliminary review of the design concept by United Air Lines' pilots had resulted in a redesign to a smaller, less capable configuration, powered by R-1340 Wasp engines. [10] [11] [12]
One concern of the pilots was that in their view, few airfields could safely take an eight-ton aircraft. [11] They also objected to the Hornet engines, which had a detonation problem when using the available low octane fuel, and suffered from excessive vibration. [13] Pratt & Whitney's chief engineer, George Mead, knew the problem would be resolved eventually, [11] but P&W's president, Frederick Rentschler acquiesced to the airline pilots' demand. The decision created a rift between Mead and Rentschler. [11] Despite the disagreements, the 247 would be Boeing's showcase exhibit at the 1933 Chicago World's Fair. [14]
The slope of the early 247's windshield was reversed from normal. This was a design solution, also used on other contemporary aircraft, to the problem of control panel instrument lights reflecting off the windshield, but the reversed windshield reflected ground lights instead, especially during landings, and it also increased drag. [15] [16] By the introduction of the 247D, the windshield was sloped normally, and the glare was resolved with a glarescreen extension over the panel. [17]
Boeing incorporated design elements to enhance passenger comfort, such as the thermostat controlled, air conditioned, and noise-proofed cabin. The crew included a pilot and copilot, as well as a flight attendant (then known as a "steward"), who could tend to passenger needs. [18] The main landing gear did not fully retract; the wheels extended slightly below the nacelles, typical of designs of the time, as a means of reducing structural damage in a wheels-up landing. The tailwheel was not retractable. While the Model 247 and 247A had speed-ring engine cowlings and fixed-pitch propellers, the Model 247D incorporated NACA cowlings and variable-pitch propellers. [19]
As the 247 emerged from its test and development phase, the company further showcased its capabilities by entering a long-distance air race in 1934, the MacRobertson Air Race from England to Australia. During the 1930s, aircraft designs were often proven in air races and other aerial contests. A modified 247D was entered, flown by Colonel Roscoe Turner and Clyde Pangborn. [20] The 247, race number "57", was essentially a production model, but all airliner furnishings were removed to accommodate eight additional fuselage fuel tanks. [21] The MacRobertson Air Race attracted aircraft entries from all over the globe, including both prototypes and established production types, with the grueling course considered an excellent proving ground, as well as an opportunity to gain worldwide attention. Turner and Pangborn came in second place in the transport section (and third overall), behind the Boeing 247's eventual rival, the new Douglas DC-2. [22]
Being the winner of the 1934 U.S. Collier Trophy for excellence in aviation design, the first 247 production orders were earmarked for William Boeing's airline, Boeing Air Transport. [21] The 247 was capable of crossing the United States from east to west eight hours faster than its predecessors, such as the Ford Trimotor and Curtiss Condor. Entering service on May 22, 1933, a Boeing Air Transport 247 set a cross-country record of 19+1⁄2 hours on its San Francisco to New York City inaugural flight. [2] [23]
Boeing sold the first 60 247s, an unprecedented $3.5 million order, to its affiliated airline, Boeing Air Transport (part of the United Aircraft and Transport Corporation, UATC), at a unit price of $65,000. [6] [9] TWA (Transcontinental & Western Air) also ordered the 247, but UATC declined the order, which resulted in TWA President Jack Frye setting out requirements for a new airliner and funding Don Douglas to design and build the Douglas DC-1 prototype. Douglas eventually developed the design into the DC-2 and DC-3. [6]
The Boeing design had been the first to enter series production, but the 247 proved to have some serious deficiencies. Airlines considered its limited capacity a drawback, since it carried only 10 passengers, in five rows with a seat on each side of the aisle, as well as a stewardess. Compared to the more spacious DC-2 and later DC-3, the passenger count was too few to make it a commercially viable airliner. [22] Another feature influencing passenger comfort was that the 247's main wing spar ran through the cabin, so persons moving through the cabin had to step over it. [24] The Lockheed Model 10 Electra had a similar configuration, and while it was a more compact design, the Electra managed to carry the same number of passengers at a slightly better overall performance, and at a lower cost-per-mile. [22]
Seventy-five 247s were built; Douglas collected 800 civil orders for DC-3s before the Pearl Harbor attack, and produced over 10,000 DC-3s, including wartime production of C-47s, while the rival Lockheed Electra "family" was eventually to reach over 3,000 in its various civil and military variants. Boeing Air Transport bought 60 examples, United Aircraft Corp. 10, Lufthansa ordered three, but only two were delivered, [25] [26] and one went to a private owner in China. While the industry primarily standardized on Boeing's competitors, many of United's aircraft were later purchased by Western Air Express at "bargain-basement prices". [27]
The 247 remained in airline service until World War II, when several were converted into C-73 transports and trainers. The Royal Canadian Air Force's 121 Squadron operated seven 247Ds as medium transports during the early part of the war. [28] One of these aircraft was donated to the Royal Air Force (RAF) for radar testing, where it was renumbered DZ203. DZ203 was passed among several units in the RAF before being used to make the world's first fully automatic blind landing on 16 January 1945. [29]
Warlord "Young Marshal" Zhang Xueliang ordered two Boeing 247Ds for his air force. He used one of them, named Bai-Ying (White Eagle), during the Xi'an incident in 1936, during which he flew into the opposing Nationalist army's camp at Sian (now rendered as Xi'an) under a secret truce, and had their leader, Generalissimo Chiang Kai-shek, arrested, ending the civil war between the Communist and Nationalist armies, so they could fight together against the Japanese invaders. [30]
A number of specially modified variants included a Boeing 247Y appropriated from United for Air Corps use as a test aircraft fitted with two machine guns in the nose. The same installation later was fitted to a 247Y owned by Generalissimo Chiang Kai-shek. This aircraft also featured a Colt .50 in (12.7 mm) machine gun in a flexible mount. [31] A 247D purchased by the British RAF became a testbed for instrument approach equipment and received a nonstandard nose, new powerplants, and fixed landing gear. [32] Some 247s were still flying in the late 1960s as cargo transports and business aircraft. [22]
The Turner/Pangborn 247D still exists. Originally flown on September 5, 1934, it was leased from United Airlines for the 1934 MacRobertson Air Race and returned to United, where it served in regular airline service until 1937. Subsequently, the 247D was sold to the Union Electric Company of St. Louis for use as an executive transport. The Air Safety Board purchased the aircraft in 1939 and it remained in use for 14 years before it was donated to the National Air and Space Museum, Washington, DC. It is displayed today with two sets of markings, the left side is marked as NR257Y, in Colonel Turner's 1934 MacRobertson Air Race colors, while the right side is painted in United Airlines livery, as NC13369. [20]
Data from Boeing aircraft since 1916 [50]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Boeing 707 is an early American long-range narrow-body airliner, the first jetliner developed and produced by Boeing Commercial Airplanes. Developed from the Boeing 367-80 prototype first flown in 1954, the initial 707-120 first flew on December 20, 1957. Pan Am began regular 707 service on October 26, 1958. With versions produced until 1979, the 707 is a swept wing quadjet with podded engines. Its larger fuselage cross-section allowed six-abreast economy seating, retained in the later 720, 727, 737, and 757 models.
The Boeing 727 is an American narrow-body airliner that was developed and produced by Boeing Commercial Airplanes. After the heavier 707 quad-jet was introduced in 1958, Boeing addressed the demand for shorter flight lengths from smaller airports. On December 5, 1960, the 727 was launched with 40 orders each from United Airlines and Eastern Air Lines. The first 727-100 rolled out on November 27, 1962, first flew on February 9, 1963, and entered service with Eastern on February 1, 1964.
The Convair 880 is a retired American narrow-body jet airliner produced by the Convair division of General Dynamics. It was designed to compete with the Boeing 707 and Douglas DC-8 by being smaller but faster, a niche that failed to create demand. When it was first introduced, some in aviation circles claimed that at 615 mph (990 km/h), it was the fastest jet transport in the world. Only 65 Convair 880s were produced over the lifetime of the production run from 1959 to 1962, and General Dynamics eventually withdrew from the airliner market after considering the 880 project a failure. The Convair 990 Coronado was a stretched and faster variant of the 880.
The Lockheed Constellation ("Connie") is a propeller-driven, four-engined airliner built by Lockheed Corporation starting in 1943. The Constellation series was the first civil airliner family to enter widespread use equipped with a pressurized cabin, enabling it to fly well above most bad weather, thus significantly improving the general safety and ease of commercial passenger air travel.
The Convair 990 Coronado is a retired American narrow-body four-engined jet airliner produced between 1961 and 1963 by the Convair division of American company General Dynamics. It was a stretched version of its earlier Convair 880 produced in response to a request from American Airlines: the 990 was lengthened by 10 ft (3.0 m), which increased the number of passengers from between 88 and 110 in the 880 to between 96 and 121. This was still fewer passengers than the contemporary Boeing 707 or Douglas DC-8, although the 990 was 25–35 mph (40–56 km/h) faster than either in cruise.
The Sud Aviation SE 210 Caravelle is a French jet airliner produced by Sud Aviation. It was developed by SNCASE in the early 1950s, and made its maiden flight on May 27, 1955. It included some de Havilland designs and components developed for the de Havilland Comet. SNCASE merged into the larger Sud Aviation conglomerate before the aircraft entered revenue service on April 26, 1959, with Scandinavian Airlines System (SAS); 282 were built until production ended in 1972. It was ordered by airlines on every continent and operated until its retirement in 2005.
The Boeing 377 Stratocruiser was a large long-range airliner developed from the C-97 Stratofreighter military transport, itself a derivative of the B-29 Superfortress. The Stratocruiser's first flight was on July 8, 1947. Its design was advanced for its day; its relatively innovative features included two passenger decks and a pressurized cabin. It could carry up to 100 passengers on the main deck plus 14 in the lower deck lounge; typical seating was for 63 or 84 passengers or 28 berthed and five seated passengers.
The Douglas DC-6 is a piston-powered airliner and cargo aircraft built by the Douglas Aircraft Company from 1946 to 1958. Originally intended as a military transport near the end of World War II, Douglas reworked it after the war to compete with the Lockheed Constellation in the long-range commercial transport market. Douglas built over 700, and many still fly in cargo, military, and wildfire control roles.
The Douglas DC-7 is an American transport aircraft built by the Douglas Aircraft Company from 1953 to 1958. A derivative of the DC-6, it was the last major piston engine-powered transport made by Douglas, being developed shortly after the earliest jet airliner—the de Havilland Comet—entered service and only a few years before the jet-powered Douglas DC-8 first flew in 1958. Larger numbers of both DC-7B and DC-7C variants were also built.
This is a list of aviation-related events from 1978.
This is a list of aviation-related events from 1979.
The Fairchild Swearingen Metroliner is a 19-seat, pressurized, twin-turboprop airliner first produced by Swearingen Aircraft and later by Fairchild Aircraft at a plant in San Antonio, Texas.
The McDonnell Douglas DC-9 is an American five-abreast, single-aisle aircraft designed by the Douglas Aircraft Company. It was initially produced as the Douglas DC-9 prior to August 1967, after which point the company had merged with McDonnell Aircraft to become McDonnell Douglas. Following the introduction of its first jetliner, the high-capacity DC-8, in 1959, Douglas was interested in producing an aircraft suited to smaller routes. As early as 1958, design studies were conducted; approval for the DC-9, a smaller all-new jetliner, came on April 8, 1963. The DC-9-10 first flew on February 25, 1965, and gained its type certificate on November 23, to enter service with Delta Air Lines on December 8.
The Convair CV-240 is an American airliner that Convair manufactured from 1947 to 1954, initially as a possible replacement for the ubiquitous Douglas DC-3. Featuring a more modern design with cabin pressurization, the 240 series made some inroads as a commercial airliner, and had a long development cycle that produced various civil and military variants. Though reduced in numbers by attrition, various forms of the "Convairliners" continue to fly in the 21st century.
The Boeing Model 40 is a United States mail plane of the 1920s. It was a single-engined biplane that was widely used for airmail services in the United States in the 1920s and 1930s, especially by airlines that later became part of United Airlines. It became the first aircraft built by the Boeing company to carry passengers.
On March 31, 1931, a Fokker F-10 belonging to Transcontinental and Western Air crashed near Bazaar, Kansas after taking off from Kansas City Municipal Airport, Kansas City, Missouri.
The Lockheed L-1649 Starliner is the last model of the Lockheed Constellation line of airliners. Powered by four Wright R-3350 Turbo-compound engines, it was built at Lockheed's Burbank, California plant from 1956 to 1958.
The Douglas DC-1 was the first model of the famous American DC commercial transport aircraft series. Although only one example of the DC-1 was produced, the design was the basis for the DC-2 and DC-3, the latter being one of the most successful aircraft in the history of aviation.
The Douglas DC-2 is a 14-passenger, twin-engined airliner that was produced by the American company Douglas Aircraft Company starting in 1934. It competed with the Boeing 247. In 1935, Douglas produced a larger version called the DC-3, which became one of the most successful aircraft in history.
The Boeing 720 is an American narrow-body airliner produced by Boeing Commercial Airplanes. Announced in July 1957 as a 707 derivative for shorter flights from shorter runways, the 720 first flew on November 23, 1959. Its type certificate was issued on June 30, 1960, and it entered service with United Airlines on July 5, 1960. A total of 154 Boeing 720s and 720Bs were built until 1967. As a derivative, the 720 had low development costs, allowing profitability despite relatively few sales.