Stroukoff YC-134

Last updated
YC-134
Stroukoff YC-134A - NASA.jpg
General information
Type Military transport aircraft
Manufacturer Stroukoff Aircraft
Designer
Primary user United States Air Force
Number built1
History
Developed from Fairchild C-123 Provider

The Stroukoff YC-134, designed in 1956, was based heavily on the Fairchild C-123 Provider, itself designed by Michael Stroukoff. The United States military contracted with Stroukoff Aircraft Corporation to develop an improved version of the aircraft, combining features that the company had developed for the YC-123D and YC-123E.

Contents

History

Stroukoff's work with the C-123

In 1956, Stroukoff had already gained much experience working on the C-123 Provider, having completed two contracts based on that airframe.

Its YC-123D had introduced a Boundary Layer Control (BLC) system to the C-123B. This system forced pressurized air over the upper wing surfaces of the airplane, making the wing work as if it were flying at much greater airspeed. This greatly improved landing and take-off performance, gross weight capability, and lowered the C-123's stall speed.

YC-123E with pantobase landing gear YC-123E with pantobase landing gear 1955.jpg
YC-123E with pantobase landing gear

The YC-123E had been another experiment in improving the C-123's ability to operate wherever it might need to, introducing Stroukoff's own Pantobase system: two high-stress skis fitted to the lower fuselage, wingtip mounted floats, along with sealing the fuselage itself. This gave the YC-123E the ability to operate on water, as well as ice and snow, and with the BLC from the previous YC-123D, the new aircraft could effectively be operated from almost any runway surface available, and airstrips of shorter length.

The YC-134

The product of a US Air Force contract in 1956, a single C-123B from the -CN production block (serial 52-1627) was modified by Stroukoff Aircraft to become the YC-134. This aircraft was heavily modified with the following new features:

These features gave an empty weight increase over the C-123B from 31,058 lb (14,088 kg) to 37,965 lb (17,221 kg), and a maximum loaded weight increase from 60,000 lb (27,000 kg) to 74,700 lb (33,900 kg). The aircraft's cruising speed was 219 mph (352 km/h), compared to the C-123B's 190 mph (310 km/h), and the YC-134 had a 1,600-mile (2,600 km) range with a 24,000 lb (11,000 kg) payload. The BLC allowed the YC-134's take-off distance to decrease from 1,850 feet (560 m) to 750 feet (230 m), very similar to that of the YC-123D. The U.S. Air Force, however, deemed that the YC-134 did not offer substantial improvement over the C-123, nor did it have a requirement for a piston-engined amphibious assault transport, and decided to purchase the Lockheed C-130 Hercules.[ citation needed ]

Specifications (YC-134A)

Data fromJane's All the World's Aircraft 1958–59 [1]

General characteristics

Performance

See also

Related development

Related lists

Related Research Articles

<span class="mw-page-title-main">Fairchild C-123 Provider</span> Military transport aircraft series by Chase Aircraft, later Fairchild Aircraft

The Fairchild C-123 Provider is an American military transport aircraft designed by Chase Aircraft and built by Fairchild Aircraft for the U.S. Air Force. In addition to its USAF service, which included later service with the Air Force Reserve and the Air National Guard, it went on to serve the U.S. Coast Guard and various air forces in Southeast Asia. During the War in Vietnam, the C-123 was used to deliver supplies, to evacuate the wounded, for agent insertions behind enemy lines, and was also used to spray Agent Orange.

<span class="mw-page-title-main">McDonnell Douglas YC-15</span> American prototype military transport aircraft

The McDonnell Douglas YC-15 is a prototype four-engine short take-off and landing (STOL) tactical transport. It was McDonnell Douglas' entrant into the United States Air Force's Advanced Medium STOL Transport (AMST) competition to replace the Lockheed C-130 Hercules as the USAF's standard STOL tactical transport. In the end, neither the YC-15 nor the Boeing YC-14 was ordered into production, although the YC-15's basic design would be used to form the successful McDonnell Douglas C-17 Globemaster III.

<span class="mw-page-title-main">Douglas A2D Skyshark</span> US prototype carrier-based attack aircraft

The Douglas A2D Skyshark was an American turboprop-powered attack aircraft built by the Douglas Aircraft Company for the United States Navy. The program was substantially delayed by engine reliability problems, and was canceled because more promising jet attack aircraft had entered development and the smaller escort carriers the A2D was intended to utilize were being phased out.

<span class="mw-page-title-main">Cessna 421 Golden Eagle</span> Pressurized twin-engine general aviation aircraft

The Cessna 421 Golden Eagle is an American six or seven seat twin-engined light transport aircraft, developed in the 1960s by Cessna as a pressurized version of the earlier Cessna 411.

<span class="mw-page-title-main">Piper PA-12 Super Cruiser</span> 1940s American light aircraft

The Piper PA-12 Super Cruiser is an American three-seat, high wing, single-engine conventional landing gear-equipped light aircraft that was produced by Piper Aircraft between 1946-48. The PA-12 was an upgraded and redesignated Piper J-5.

<span class="mw-page-title-main">PZL.44 Wicher</span> Polish airliner prototype

The PZL.44 Wicher (gale) was a prototype of 14-seat, twin-engine Polish airliner, built in the Państwowe Zakłady Lotnicze (PZL) in 1938. It was to compete with the DC-2 and Lockheed Super Electra.

<span class="mw-page-title-main">Chase YC-122 Avitruc</span> Type of aircraft

The Chase XCG-18A and YC-122 Avitruc was a military transport aircraft designed by Chase Aircraft and produced in limited numbers in the United States in the late 1940s, initially as a glider, but definitively in powered form. The design was based on the CG-14 cargo glider but was substantially larger and featured all-metal construction. It was a high-wing cantilever monoplane. The fuselage was of rectangular cross-section and featured a loading ramp at its rear. The main undercarriage units were carried at the sides of the fuselage and were fixed, while the nosewheel was retractable. In its powered form, two radial engines were fitted in nacelles in the wings.

<span class="mw-page-title-main">Chase XCG-20</span> Transport glider, U.S. Air Force, 1950

The Chase XCG-20, also known as the XG-20 and by the company designation MS-8 Avitruc, was a large assault glider developed immediately after World War II by the Chase Aircraft Company for the United States Air Force, and was the largest glider ever built in the United States. The XG-20 did not see production due to a change in USAF requirements, however, it was modified into the successful Fairchild C-123 Provider twin-engined transport aircraft which saw extensive service in the Vietnam War.

<span class="mw-page-title-main">Chasle Tourbillon</span> Type of aircraft

The Chasle YC-12 Tourbillon ("Whirlwind") was a single-seat light sporting aircraft developed in France in the mid-1960s and marketed for homebuilding via plans. It was a low-wing cantilever monoplane of conventional configuration. As designed, it featured fixed tailwheel undercarriage, but it could also be fitted with fixed tricycle gear.

<span class="mw-page-title-main">Pützer Elster</span> Light aircraft

The Pützer Elster was a German single-engined light aircraft, manufactured by Alfons Pützer KG in Bonn. It served with the Luftwaffe and Marineflieger and was used solely for recreational sport flying. Some continue to fly in 2020 in private ownership.

<span class="mw-page-title-main">Chase XC-123A</span>

The Chase XC-123A was an experimental transport aircraft developed by Chase Aircraft. The first jet-powered transport built for the United States Air Force, it was intended for use as a high-speed transport for high-priority cargo and personnel. The XC-123A was determined to have insufficient advantages over existing types in service, and did not go into production. The sole prototype was converted into the piston-powered Stroukoff YC-123D to evaluate boundary layer control systems.

Stroukoff Aircraft was an American manufacturer of experimental military transport aircraft, established in 1954 by Michael Stroukoff. Successor to Chase Aircraft, the company specialised in developing advanced variants of the C-123 Provider; however, none of the company's designs attracted a production order, and the company folded in 1959.

<span class="mw-page-title-main">Colyaer Gannet S100</span> Spanish ultralight flying boat

The Colyaer Gannet S100 is a Spanish ultralight flying boat, designed and produced by Colyaer of Portonovo.

<span class="mw-page-title-main">Backcountry Super Cubs Mackey SQ2</span> American homebuilt aircraft

The Backcountry Super Cubs Mackey SQ2 is an American STOL amateur-built aircraft, designed and produced by Backcountry Super Cubs of Douglas, Wyoming. The aircraft is based upon the design of the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.

The Schmidtler Enduro is a German ultralight trike that was designed and produced by Ultraleichtflug Schmidtler of Munich. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft.

<span class="mw-page-title-main">Northwest Ranger</span> Canadian light airplane

The Northwest Ranger was a Canadian bush aircraft that was under development by Northwest Industries (NWI) of Edmonton, Alberta between 1968 and 1972. The aircraft was a type certified design, and intended to be supplied as a complete ready-to-fly-aircraft.

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

The Historical F4U Corsair is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 60% scale replica of the original Chance-Vought F4U Corsair and when it was available was supplied as a kit for amateur construction.

The Vortech A/W 95 is an American helicopter that was designed by Adams-Wilson as the Adams-Wilson Choppy and now produced in an improved version by Vortech of Fallston, Maryland. The aircraft is supplied in the form of plans for amateur construction. Vortech also supplies rotor blades and other key parts for the design.

<span class="mw-page-title-main">Albatros L 83 Adler</span> Type of aircraft

The Albatros L 83 Adler was a small, fast transport aircraft for passengers, mail or other cargo, flown in Germany in 1931. Two were built.

References