Cessna 190 & 195 | |
---|---|
![]() Cessna 195 | |
General information | |
Type | Light personal and business aircraft |
National origin | United States |
Manufacturer | Cessna Aircraft Company |
Primary users | United States Army |
Number built | 1,180 [1] |
History | |
Manufactured | 1947–1954 |
Introduction date | 1947 |
First flight | 1945 |
Developed from | Cessna 165 |
Developed into | Cessna X210 |
The Cessna 190 and 195 Businessliner are a family of light single radial engine powered, conventional landing gear equipped, general aviation aircraft which were manufactured by Cessna between 1947 and 1954. [2]
The 195 model was also used by the United States Air Force, United States Army, and Army National Guard as a light transport and utility aircraft under the designations LC-126/U-20. [3] [4] [5]
The Cessna 190 and 195 were Cessna's only postwar radial-engined aircraft. The first prototype flew in 1945, after the end of World War II and both the 190 and 195 entered production in 1947. [6] [7]
The 195 was the first Cessna airplane to be completely constructed of aluminum and features a cantilever wing, similar to the pre-war Cessna 165 from which it is derived. The wing differs from later Cessna light aircraft in that it has a straight taper from root chord to tip chord and no dihedral. The airfoil employed is a NACA 2412, the same as used on the later Cessna 150, 172 and 182. [3] [8]
The 190/195 fuselage is large in comparison to other Cessna models because the 42" diameter radial engine had to be accommodated in the nose. There are two rows of seats: two individual seats in the first row, with a comfortable space between them and up to three passengers can be accommodated on a bench seat in the second row. [6]
The 190/195 has flat sprung-steel landing gear legs derived from Cessna's purchase of the rights to Steve Wittman's Big X. Many have been equipped with swiveling crosswind landing gear which allows landing with up to 15 degrees of crab. While the crosswind gear simplifies the actual landing, it makes the aircraft difficult to handle on the ground. The 195 is equipped with a retractable step that extends when the cabin door is opened, although some have been modified to make the step a fixed unit. [3]
The aircraft was expensive to purchase and operate for private use and Cessna therefore marketed them mainly as a business aircraft under the name "Businessliner". [2]
The engines fitted to the 190 and 195 became well known for their oil consumption. The aircraft has a 5-US-gallon (19 L) oil tank, with 2 US gallons (7.6 L) the minimum for flight. Typical oil consumption with steel cylinder barrels is 2 US quarts (1.9 L) per hour. [6]
A factory-produced floatplane version was equipped with a triple tail for improved yaw stability.
The Cessna 195 produces a cruise true airspeed of 148 knots (274 km/h) (170 MPH) on a fuel consumption of 16 US gallons (61 L) per hour. [3] It can accommodate five people.
Including the LC-126s, a total of 1180 190s and 195s were built. [1]
The 190 was originally introduced at a price of USD$12,750 in 1947 (equivalent to $173,978in 2023). When production ended in 1954 the price had risen to USD$24,700 (equivalent to $280,239in 2023) for the 195B. This compared to USD$3,495 for the Cessna 140 two seater of the same period. [3] [9]
The LC-126 was the military version of the 300 hp (220 kW) Cessna 195 and could be fitted with skis or floats. 83 LC-126s were delivered, including: [1] [3]
Once made surplus the majority of LC-126s were sold as civil aircraft, once modified by a Cessna civil kit. [3] [4]
The Cessna 190 and 195 are considered "one of the finest classics ever built" by pilots and collectors and are much sought after on the used aircraft market. [1] [6]
On July 24, 2017 the number of 190s and 195s still registered in the USA were: [10] [11]
In February 2014 there were three Cessna 190s, eleven Cessna 195s, two Cessna 195As and two Cessna 195Bs registered in Canada. [12] [13] [14] [15] Other Cessna 190 and 195 aircraft have been purchased by private pilot owners resident in Brazil and the United Kingdom.
The main difference between the 190 and the 195 models was the engine installed. [4]
The Cessna 190 and 195 have been popular with private individuals and companies, and have also been operated by some air charter companies and small feeder airlines.
Data from The Complete Guide to Single Engine Cessna, 3rd Edition [3]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Cessna 170 is an American single-engine, four seat, general aviation aircraft produced by the Cessna Aircraft Company between 1948 and 1956.
The Henschel Hs 126 was a twin-seat parasol wing reconnaissance and observation aircraft designed and produced by the German aircraft manufacturer Henschel.
The Cessna 182 Skylane is an American four-seat, single-engined light airplane built by Cessna of Wichita, Kansas. It has the option of adding two child seats in the baggage area.
The Cessna 120,140, and 140A, are single-engine, two-seat, conventional landing gear (tailwheel), light general aviation aircraft that were first produced in 1946, immediately following the end of World War II. Production ended in 1951, and was succeeded in 1959 by the Cessna 150, a similar two-seat trainer which introduced tricycle gear. Combined production of the 120, 140, and 140A was 7,664 units in five years.
The Stinson L-13 is a US military utility aircraft first flown in 1945.
The Stinson 108 is a popular single-engine, four-seat, light general aviation aircraft produced by the Stinson division of the American airplane company Consolidated Vultee, from immediately after World War II to 1950. The 108 was developed from the prewar Model 10A Voyager.
The Cessna AT-17 Bobcat or Cessna Crane is a twin-engine advanced trainer aircraft designed and made in the United States, and used during World War II to bridge the gap between single-engine trainers and larger multi-engine combat aircraft. The commercial version was the Model T-50, from which the military versions were developed.
The Cessna 401 and 402 are a series of 6 to 10 seat, light twin-piston engine aircraft. All seats are easily removable so that the aircraft can be used in an all-cargo configuration. Neither the Cessna 401 nor the 402 were pressurized, nor were they particularly fast for the installed power. Instead, Cessna intended them to be inexpensive to purchase and operate.
The Cessna 188 is a family of light agricultural aircraft produced between 1966 and 1983 by the Cessna Aircraft Company.
The Cessna 421 Golden Eagle is an American six or seven seat twin-engined light transport aircraft, developed in the 1960s by Cessna as a pressurized version of the earlier Cessna 411.
The Cessna Airmaster, is a family of single-engined aircraft manufactured by the Cessna Aircraft Company. The Airmaster played an important role in the revitalization of Cessna in the 1930s after the crash of the aviation industry during the Great Depression.
The Cessna Model CW-6 was a 1920s American six-seat touring aircraft built by the Cessna Aircraft Company.
The SIAI-Marchetti SM.1019 is an Italian STOL liaison monoplane built by SIAI-Marchetti for the Italian Army. It is a turboprop-powered derivative of the Cessna O-1 Bird Dog.
The Cessna C-106 Loadmaster was a 1940s American twin-engined transport monoplane. Built of plywood it did not enter production due to a wartime shortage of material.
The Thaden T-2 was a 1920s American four-seat all-metal cabin monoplane built by the Thaden Metal Aircraft Company of San Francisco, California, USA.
The Westfall Sport is a single seat biplane modeled after the Waco F2.
The Paramount Cabinaire was a 1920s designed cabin biplane, designed by Walter J. Carr and produced by the Paramount Aircraft Corporation. Only eight were completed before production ceased.
The Aero Designs Pulsar is an American two-seat, low wing, ultralight and homebuilt aircraft that was designed by Mark Brown and first produced by Aero Designs of San Antonio, Texas, introduced in 1985. When it was available the Pulsar was supplied as a ready-to-fly aircraft and as a kitplane for amateur construction.
The Murphy Yukon is a Canadian amateur-built aircraft, produced by Murphy Aircraft of Chilliwack, British Columbia, introduced at the AirVenture show in 2007. The aircraft is supplied as a kit for amateur construction.
The Laird LC-B was a three seat, single-engined biplane, built for private owners in the U.S. in the late 1920s and offering a variety of engines. About 35 had been built before production ceased in the mid-1930s. Two have been restored to flight.