Cessna 160 | |
---|---|
Role | Light Aircraft |
National origin | United States |
Manufacturer | Cessna |
First flight | 1962 |
Retired | 1974 |
Status | Canceled |
Number built | 1 |
The Cessna 160 was an American single-engine, four-seater, high wing, strut-braced, prototype monoplane designed in 1962 by Cessna. [1]
Development beyond the prototype stage was not pursued and only one example was constructed. [1]
Cessna thought that a less expensive four-seater aircraft than the existing Cessna 172 would have good market potential. The company designed a simplified four-seat high-wing aircraft using non-tapering wings, extensive use of heavily beaded wing and fuselage skins as well as free-castering nose gear to save weight and decrease the man-hours required for construction. [1]
The aircraft was intended to be sold for US$8,450, which would have been just US$955 more than the 1962 model two-place Cessna 150B and far below the cost of the 1962 model Cessna 172C, which was US$9895.
The prototype aircraft was registered as N5419E and first flew in 1962, powered by a Franklin engine of 125 hp (93 kW). The intention was to use a 145 hp (108 kW) Continental O-300 engine for the production model. [1] [2]
The aircraft was subjected to a flight test program in 1962 and 1963. The Franklin engine gave the aircraft a top speed of 134 mph (216 km/h), while the proposed O-300 powered version was forecast to have a top speed of 143 mph (230 km/h). A proposed military version, tentatively designated Cessna 160M and powered by a 210 hp (157 kW) Continental IO-360, would have had a top speed of 174 mph (280 km/h). [1]
The flight test program showed that, while the aircraft met its goals, it did not offer enough cost advantages to proceed to production when tooling costs were accounted for. As a result, the project was abandoned. [2]
The sole prototype Cessna 160 was retained by the company until 1974, when it was sold as scrap. The scrap yard did not complete the destruction of the airframe and it was later offered for sale. [1]
The Piper PA-28 Cherokee is a family of two-seat or four-seat light aircraft built by Piper Aircraft and designed for flight training, air taxi and personal use. The PA-28 family of aircraft comprises all-metal, unpressurized, single-engined, piston-powered airplanes with low-mounted wings and tricycle landing gear. They have a single door on the right side, which is entered by stepping on the wing.
The Cessna 172 Skyhawk is an American four-seat, single-engine, high wing, fixed-wing aircraft made by the Cessna Aircraft Company. First flown in 1955, more 172s have been built than any other aircraft. It was developed from the 1948 Cessna 170 but with tricycle landing gear rather than conventional landing gear. The Skyhawk name was originally used for a trim package, but was later applied to all standard-production 172 aircraft, while some upgraded versions were marketed as the Cutlass.
The Cessna 170 is an American light, single-engined, general aviation aircraft produced by the Cessna Aircraft Company between 1948 and 1956.
The Cessna 182 Skylane is an American four-seat, single-engined light airplane built by Cessna of Wichita, Kansas. It has the option of adding two child seats in the baggage area.
The Cessna 120,140, and 140A, are single-engine, two-seat, conventional landing gear (tailwheel), light general aviation aircraft that were first produced in 1946, immediately following the end of World War II. Production ended in 1951, and was succeeded in 1959 by the Cessna 150, a similar two-seat trainer which introduced tricycle gear. Combined production of the 120, 140, and 140A was 7,664 units in five years.
The Cessna 180 Skywagon is a four- or six-seat, fixed conventional gear general aviation airplane which was produced between 1953 and 1981. Though the design is no longer in production, many of these aircraft are still in use as personal aircraft and in utility roles such as bush flying.
The Cessna 175 Skylark is a four-seat, single-engine, high-wing airplane produced by Cessna between 1958 and 1962.
The McDonnell XP-67 "Bat" or "Moonbat" was a prototype for a twin-engine, long-range, single-seat interceptor aircraft for the United States Army Air Forces. Although the design was conceptually advanced, it was beset by numerous problems and never approached its anticipated level of performance. The project was cancelled after the sole completed prototype was destroyed by an engine fire.
The Cessna 185 Skywagon is a six-seat, single-engined, general aviation light aircraft manufactured by Cessna. It first flew as a prototype in July 1960, with the first production model completed in March 1961. The Cessna 185 is a high-winged aircraft with non-retractable conventional landing gear and a tailwheel.
The Cessna 190 and 195 Businessliner are a family of light single radial engine powered, conventional landing gear equipped, general aviation aircraft which were manufactured by Cessna between 1947 and 1954.
The Cessna Airmaster, is a family of single-engined aircraft manufactured by the Cessna Aircraft Company. The Airmaster played an important role in the revitalization of Cessna in the 1930s after the crash of the aviation industry during the Great Depression.
The Piper J-4 Cub Coupe is a two place side-by-side version of the Piper J-3 that was built between 1938 and 1942 by Piper Aircraft. It was Piper's first model with side-by-side seating; combined with docile low-speed handling, this made it a good trainer.
The Call-Air Model A is an American two- to three-seat utility aircraft designed by the Call brothers and built by the Call Aircraft Company, later developed into a successful line of agricultural aircraft.
The Procaer F.15 Picchio is an Italian-designed light utility aircraft built by Procaer.
The SECAN SUC-10 Courlis was a French high-wing touring monoplane designed and built by Société d'Etudes et de Construction Aéronavales (SECAN), a branch of the automobile company Société des Usines Chaussons. The aircraft had problems with the engine installation and only 144 were built, some without engines and were scrapped.
The Stits SA-3A Playboy is a single seat, strut-braced low-wing monoplane that was designed by Ray Stits for amateur construction. The aircraft was designed and the prototype was completed in a three-month period during 1952. The design went on to become one of the most influential in the post-war boom in aircraft homebuilding.
The Kestrel KL-1 is an American single-engined four-seat utility aircraft designed and built in the 1990s by the Kestrel Aircraft Company of Norman, Oklahoma.
The SGP M-222 Flamingo was an Austrian twin engine, four seat light aircraft, developed with a series of prototypes into the early 1960s. There was no series production.
The Ireland Privateer was a 1930s American two-seat, single pusher-engined monoplane sports flying boat which could be equipped as an amphibian. About 18 were built.
The Franklin Sport is a two seat sport and training biplane built in the U.S. in 1930. Several different engines, in the power range 55–90 hp (41–67 kW), were fitted. Two remained airworthy in 2011.