Cessna 150 | |
---|---|
General information | |
Type | Light utility aircraft, basic trainer |
Manufacturer | Cessna |
Status | In service |
Number built | 23,839 [1] |
History | |
Manufactured | 1958–1977 |
First flight | September 12, 1957 |
Variants | Cessna 152 |
The Cessna 150 is a two-seat tricycle gear general aviation airplane that was designed for flight training, touring and personal use. [2] In 1977, it was succeeded in production by the Cessna 152, a minor modification to the original design.
The Cessna 150 is the fifth most produced aircraft ever, with 23,839 produced. [3] The Cessna 150 was offered for sale in named configurations that included the Standard basic model, the Trainer with dual controls, and the deluxe Commuter, along with special options for these known as Patroller options. Later, these configurations were joined by the top-end Commuter II and the aerobatic Aerobat models.
In 2007, Cessna announced a successor to the Model 150 and 152, the Model 162 Skycatcher.
In the mid-1950s, Cessna Aircraft Company began development of a successor to the popular Cessna 140 which finished production in 1951. The resulting 142 was based on the 140, but had tricycle landing gear, which gives the aircraft more docile ground handling than the tailwheel landing gear of the 140; Cessna also replaced the rounded tips of the wings and empennage with more modern-looking, squared-off tips, and the narrow, hinged wing flaps of the 140 were replaced by larger, far more effective Fowler flaps. [4] [5]
The Cessna 142 prototype first flew on September 12, 1957, shortly before the aircraft was renamed to Model 150 in October. [5] [6] Production commenced in September 1958 at Cessna's Wichita, Kansas, plant. [7] 1,764 aircraft were also produced by Reims Aviation under license in France. These French manufactured 150s were designated Reims F150 or Reims-Cessna F150, the "F" indicating they were built in France.
American-made 150s were all produced with the Continental O-200-A engine of 100 horsepower (75 kW). Most Reims-built aircraft are powered by a Continental O-200-A built under license by Rolls-Royce, but some have the Rolls-Royce-built version of the Continental O-240-A.
All models from 1966 onwards have larger doors and increased baggage space. With the 1967 Model 150G, the doors were bowed outwards 1.5 inches (38 mm) on each side to provide more cabin elbow room.
The 150 was succeeded in the summer of 1977 by the closely related Cessna 152. The 152 is more economical to operate due to the increased TBO (time between overhaul) of the Lycoming O-235 engine. The 152 had its flap travel limited to 30 degrees, from the 150's 40 degree flap deflection, for better climb with full flaps and the maximum certified gross weight was increased from 1,600 lb (726 kg) on the 150 to 1670 lb (757 kg) on the 152. Production of the 152 ended in 1985 when manufacturing of all Cessna piston singles was suspended. [2]
This section needs additional citations for verification .(September 2018) |
A total of 22,138 Cessna 150s were built in the United States, including 21,404 Commuters and 734 Aerobats. Reims Aviation completed 1,764 F150s, of which 1,428 were Commuters and 336 were Aerobats. A Reims affiliate in Argentina also assembled 47 F150s, including 38 Commuters and 9 Aerobats.[ citation needed ]
Of all the Cessna 150/152 models, the 1966 model year was the most plentiful with 3,067 1966 Cessna 150s produced. This was the first year the aircraft featured a swept tail fin, increased baggage area and electrically operated flaps.
Cessna has historically used model years like the U.S. automobile industry, with new models typically being introduced a few months prior to the actual calendar year.
There are hundreds of modifications available for the Cessna 150. Some of the most frequently installed include:
The Aviat 150 is an overhauled and rebuilt Cessna 150 by Aviat. [36]
The aircraft is popular with flying schools as well as private individuals.
Data from Jane's All The World's Aircraft [66]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Cessna 172 Skyhawk is an American four-seat, single-engine, high wing, fixed-wing aircraft made by the Cessna Aircraft Company. First flown in 1955, more 172s have been built than any other aircraft. It was developed from the 1948 Cessna 170 but with tricycle landing gear rather than conventional landing gear. The Skyhawk name was originally used for a trim package, but was later applied to all standard-production 172 aircraft, while some upgraded versions were marketed as the Cutlass, Powermatic, and Hawk XP. The aircraft was also produced under license in France by Reims Aviation, which marketed upgraded versions as the Reims Rocket.
The Cessna 152 is an American two-seat, fixed-tricycle-gear, general aviation airplane, used primarily for flight training and personal use. It was based on the earlier Cessna 150 incorporating a number of minor design changes and a slightly more powerful engine with a longer time between overhaul.
The Cessna 182 Skylane is an American four-seat, single-engined light airplane built by Cessna of Wichita, Kansas. It has the option of adding two child seats in the baggage area.
The Cessna 120,140, and 140A, are single-engine, two-seat, conventional landing gear (tailwheel), light general aviation aircraft that were first produced in 1946, immediately following the end of World War II. Production ended in 1951, and was succeeded in 1959 by the Cessna 150, a similar two-seat trainer which introduced tricycle gear. Combined production of the 120, 140, and 140A was 7,664 units in five years.
The Cessna Skymaster is an American twin-engine civil utility aircraft built in a push-pull configuration. Its engines are mounted in the nose and rear of its pod-style fuselage. Twin booms extend aft of the wings to the vertical stabilizers, with the rear engine between them. The horizontal stabilizer is aft of the pusher propeller, mounted between and connecting the two booms. The combined tractor and pusher engines produce centerline thrust and a unique sound. The Cessna O-2 Skymaster is a military version of the Cessna Model 337 Super Skymaster.
The Cessna 180 Skywagon is a four- or six-seat, fixed conventional gear general aviation airplane which was produced between 1953 and 1981. Though the design is no longer in production, many of these aircraft are still in use as personal aircraft and in utility roles such as bush flying.
The Piper PA-38-112 Tomahawk is a two-seat, fixed tricycle gear general aviation airplane, originally designed for flight training, touring and personal use.
The Piper PA-34 Seneca is a twin-engined light aircraft, produced in the United States by Piper Aircraft. It has been in non-continuous production since 1971. The Seneca is primarily used for personal and business flying as well as multi-engine class rating flight training.
The Cessna 205, 206 and 207, known primarily as the Stationair, are a family of single-engined, general aviation aircraft with fixed landing gear, used in commercial air service as well as for personal use. The family was originally developed from the popular retractable-gear Cessna 210 and produced by the Cessna Aircraft Company.
The Cessna 175 is a light four-seat, single-engine, fixed wing aircraft produced by Cessna between 1958 and 1962. A deluxe model known as the Skylark was introduced in 1960. The aircraft is similar to the popular Cessna 172 but has higher gross weight and a more powerful engine with a geared reduction drive.
The Cessna 401 and 402 are a series of 6 to 10 seat, light twin-piston engine aircraft. All seats are easily removable so that the aircraft can be used in an all-cargo configuration. Neither the Cessna 401 nor the 402 were pressurized, nor were they particularly fast for the installed power. Instead, Cessna intended them to be inexpensive to purchase and operate.
The Cessna 177 Cardinal is a light single-engine, high-wing general aviation aircraft produced by Cessna. It was intended to replace the Cessna 172 Skyhawk. First announced in 1967, it was produced from 1968 to 1978.
The Cessna 310 is an American four-to-six-seat, low-wing, twin-engine monoplane produced by Cessna between 1954 and 1980. It was the second twin-engine aircraft that Cessna put into production; the first was the Cessna T-50.
The Cessna 421 Golden Eagle is an American six or seven seat twin-engined light transport aircraft, developed in the 1960s by Cessna as a pressurized version of the earlier Cessna 411.
The Cessna Citation II models are light corporate jets built by Cessna as part of the Citation family. Stretched from the Citation I, the Model 550 was announced in September 1976, first flew on January 31, 1977, and was certified in March 1978. The II/SP is a single pilot version, the improved S/II first flew on February 14, 1984 and the Citation Bravo, a stretched S/II with new avionics and more powerful P&WC PW530A turbofans, first flew on April 25, 1995. The United States Navy adopted a version of the S/II as the T-47A. Production ceased in 2006 after 1,184 of all variants were delivered.
The Cessna 190 and 195 Businessliner are a family of light single radial engine powered, conventional landing gear equipped, general aviation aircraft which were manufactured by Cessna between 1947 and 1954.
The Cessna Model 411 is an American twin-engined, propeller-driven, pressurized light aircraft built by Cessna Aircraft. It was that company's largest business aircraft to enter production when it first flew in 1962.
The Bradley BA 100 Aerobat is an American aerobatic homebuilt aircraft that was designed and produced by Bradley Aerospace of Chico, California. When it was available the aircraft was supplied as a kit for amateur construction.
The Continental O-240 engine is a four-cylinder, horizontally opposed, air-cooled aircraft engine that was developed in the late 1960s for use in light aircraft by Continental Motors, Inc. The first O-240 was certified on 7 July 1971.
The Collins Dipper was an American homebuilt flying boat that was designed and produced by Collins Aero of Chadds Ford, Pennsylvania and first flown in 1982. The aircraft was supplied in the form of plans for amateur construction. Only one was built and none remain registered.