Model 700 Citation Longitude | |
---|---|
Role | Corporate Jet |
National origin | United States |
Manufacturer | Textron Aviation |
First flight | October 8, 2016 [1] |
Introduction | October 2019 [2] |
Status | In production |
Produced | September 2019 – present |
Number built | 100 (May 2023) [3] |
Developed from | Cessna Citation Latitude |
Developed into | Cessna Citation Hemisphere |
The Cessna Citation Longitude is a business jet produced by Cessna, part of the Cessna Citation family. It remains the largest business jet by Cessna. Announced at the May 2012 EBACE, the Model 700 made its first flight on October 8, 2016, with certification obtained in September 2019. The aluminum airframe has the fuselage cross-section of the Citation Latitude, stretched by a seat row. Powered by Honeywell HTF7000 turbofans, it has a new ~28° swept wing and a T-tail for a 3,500 nmi (6,500 km) range.
The project is perceived as the follow-on development to the now-canceled Cessna Citation Columbus. Its fuselage cross-section (83.25-inch [211.5 cm] circular section) is the same as the Cessna Citation Latitude. The aircraft has a T-tail empennage and area rule fuselage contouring. The aluminum wings incorporate moderate winglets. Construction is aluminum for both wing and fuselage. The cabin is 7 inches (18 cm) shorter and 6 inches (15 cm) narrower than the Columbus design. [4]
Initially, the Snecma Silvercrest engine was selected to power the aircraft, [5] however the production model is powered by Honeywell HTF7000 turbofans. [6] The Silvercrest was planned for the larger Citation Hemisphere, but Textron suspended its development in July 2019 as the turbofan did not meet objectives. [7]
Its wings and empennage are similar to the Hawker 4000 with winglets leading to a 5.3 feet (1.6 m) larger wingspan. The moderately super-critical wing have a quarter-chord sweep of 26.8° for its inner section and 28.6° for the outer section. The six-passenger Latitude fuselage has been reinforced and stretched by another row of seats to accommodate eight people in double club. The manufacturer has not announced the final design weights (as of May 2016); BCA estimates a 24,000–25,000-pound (10,900–11,300 kg) basic operating weight. Cabin height is 6.0 ft (1.8 m), width is 6 ft 5 in (1.96 m), floor width is 4 ft 1 in (1.24 m) and cabin length is 25 ft (7.6 m). [8]
After a takeoff at 31,150 lb (14,130 kg), 8,350 lb (3,790 kg) below the 39,500 lb (17,900 kg) MTOW, the climb rate is 2,550 ft/min (13.0 m/s) at FL200. At its Mach 0.83, 473 kn (876 km/h) TAS max cruise, fuel flow per side is 860–880 lb (390–400 kg) per hour at FL430 and ISA -4. [9] A M0.79 long range cruise would burn 1,820 lb (830 kg) per hour at a 451 kn (835 km/h) true airspeed for a 38,001 lb (17,237 kg) aircraft, and 2,122 lb (963 kg) per hour at its M0.84 MMO - 477 kn (883 km/h) TAS. [10]
Announced at the May 2012 EBACE and scheduled for introduction in 2017. [11] The first flight-test aircraft completed its first flight on October 8, 2016. [1] The second flew in November, and in March 2017 the third, used to develop avionics and systems and to collect flight simulator data before two others will join the test program. The two aircraft completed 125 flights for more than 250 hours as production of the aircraft commenced at Textron Aviation's Wichita, Kansas facility. [12]
Less than eight months after the first flight and after more than 200 missions for nearly 400 hours, on track for certification later in 2017, the fourth prototype joined the flight-test program on May 6, fully outfitted for interior, environmental control system, pressurization and cabin technologies evaluation. [13] The first production unit was rolled out on June 13, 2017, as the four test aircraft have flown 550 hours and a fifth aircraft will join in summer 2017. [14] In October 2017, test aircraft have completed more than 1,200 flight hours over 600 flights, for a certification expected by the end of 2017 or in early 2018. [15]
In February 2018, as the five aircraft accumulated over 1,000 flights and 2,000 hours, US approval and customer deliveries of the US$27 million jet were expected before the end of the second quarter before European validation six months later. [16] After 3,000 hours on five aircraft, flight testing will conclude by early June 2018, and 200,000 pages of documentation will be completed after a month. [17] As testing has doubled for certification, expanding related documentation, it is expected in the third quarter of 2018 with deliveries from late in this quarter or early in the fourth, less than a year after originally planned. [18] It received a partial exemption for fuel tank flammability requirements applicable through January 2020 to keep its third-quarter approval goal, but a compliance plan had to be submitted by October 1, 2018. [19]
On October 15, 2018, fractional operator NetJets announced the purchase of up to 175 Longitudes, sold for $26 million each, along 150 Citation Hemispheres, priced at $35 million. [20] After 4,050 hours in 1,650 test flights, the Longitude received a provisional FAA type certification on December 20, allowing deliveries in early 2019. [21] The fuel tank flammability requirements were addressed on December 5, with airplanes to be delivered having the definitive installation but limiting it for high elevation airport or RVSM operations, and restricting maintenance. [22] The provisional type certification allowed to begin customer training flights and Textron expects certification in February 2019, while deliveries to NetJets should begin in the third quarter. [23]
On September 21, 2019, the FAA granted its Type Certification. [24] It came after 6,000 flight hours, 11,000 test points and a 31,000 nmi (57,000 km) world tour. [25] The first was shipped in early October. [2] On December 31, 2019, NetJets took delivery of its first Longitude from its order for 150, expecting to enter service early in the first quarter of 2020. [26]
Textron Aviation announced EASA certification of the Citation Longitude on July 13, 2021. [27] In 2023, its equipped price was $29.995M. [28] The 100th Longitude was delivered in May 2023. [3]
Data from "Citation Longitude Specifications". Textron Aviation.
General characteristics
Performance
Avionics
Related development
Aircraft of comparable role, configuration, and era
The Cessna Citation Mustang is a very light jet that was built by Cessna. Launched at the 2002 NBAA convention, the Model 510 first flew on April 23, 2005. It received its FAA type certification on September 8, 2006, and was first delivered on November 22. Production ended in 2017 after 479 aircraft were built. The 8,645 lb (3,921 kg) maximum take-off weight jet is powered by two Pratt & Whitney Canada PW615F 1,460 lbf (6.5 kN) turbofans, can reach 340 kn (630 km/h), and has a range of 1,167 nmi (2,161 km).
The Honda HA-420 HondaJet is a light business jet produced by the Honda Aircraft Company of Greensboro, North Carolina, United States. Original concepts of the aircraft started in 1997 and were completed in 1999. It took its maiden flight on December 3, 2003, received its FAA type certificate in December 2015, and was first delivered that same month. By the end of 2021, 200 jets had been delivered.
The Hawker 400 is a light business jet. Initially designed and built by Mitsubishi, it has been further developed and updated by the Beech Aircraft Company, now part of Textron Aviation. A military version, the T-1 Jayhawk was also produced. In total, over 900 Hawker 400s have been delivered. In 2017, Hawker began to offer a manufacturer supported upgrade package known as the Hawker 400XPR. The new modifications are intended to reduce fuel consumption and improve range.
The Cessna Citation is a family of business jets by Cessna that started in 1972 with the entry into service of the first model. In the fifty years following the 1969 first flight, more than 7,500 Citations were delivered, forming the largest business jet fleet. Deliveries reached 8,000 by 2022, while logging over 41 million flight hours.
The Cessna Citation Excel is an American midsize business jet in the Cessna Citation family. Announced in October 1994, the Model 560XL first flew on February 29, 1996, certification was granted in April 1998, and over 1,000 have been delivered. The 2,100 nmi-range (3,900 km), 20,200 lb MTOW jet is powered by two 3,650–4,080 lbf (16.2–18.1 kN) PW545 turbofans, has the cruciform tail and unswept supercritical wing of the Citation V (560), and a slightly shortened Citation X stand-up cabin. The XLS 2004 update had upgraded engines and a glass cockpit and the 2008 XLS+ had upgraded engines and a revised nose.
The SyberJet SJ30 is a light business jet built by American company SyberJet Aircraft. In October 1986, Ed Swearingen announced the new design, a 6 to 8 person aircraft powered by two Williams FJ44 turbofans. Initially backed by Gulfstream Aerospace from October 1988, the Jaffe Group took over in September 1989 and the first SJ-30 flew on February 13, 1991 but development halted afterwards. The Taiwan-based Sino Swearingen Aircraft Corporation rescued the program, the jet was stretched by 4.3 ft into the SJ30-2 with a wingspan increased by six feet.
The Cessna Citation III is an American business jet produced by Cessna and part of the Citation family. Announced at the October 1976 NBAA convention, the Model 650 made its maiden flight on May 30, 1979, received its type certification on April 30, 1982 and was delivered between 1983 and 1992. The cheaper Citation VI was produced from 1991 to 1995 and the more powerful Citation VII was offered between 1992 and 2000; 360 of all variants were delivered, while a proposed transcontinental variant, the Citation IV, was canceled before reaching the prototype stage. An all new design, the Citation III had a 312 sq ft swept wing for a 22,000 lb MTOW and a 2,350 nmi (4,350 km) range, a T-tail and two 3,650–4,080 lbf (16.2–18.1 kN) TFE731 turbofans. Its fuselage cross section and cockpit were kept in the later Citation X, Citation Excel and Citation Sovereign.
The Cessna CitationJet/CJ/M2 are a series of light business jets built by Cessna, and are part of the Citation family. Launched in October 1989, the first flight of the Model 525 was on April 29, 1991. Federal Aviation Administration (FAA) certification was awarded on October 16, 1992, and the first aircraft was delivered on March 30, 1993. The CJ series are powered by two Williams FJ44 engines; the design uses the Citation II's forward fuselage with a new carry-through section wing and a T-tail. The original CitationJet model has been updated into the CJ1/CJ1+/M2 variants; additionally, the CJ1 was stretched into the CJ2/CJ2+ which was built between 2000 and 2016. The design was then further developed into the CJ3/CJ3+, built from December 2004 to present, and finally into the CJ4 which has been built since 2010. By June 2017, 2,000 of all variants had been delivered.
The Embraer Legacy 450/500 and Praetor 500/600 are a family of mid-size and super mid-size business jets built by Brazilian aircraft manufacturer Embraer. The aircraft family was launched with the Legacy 500 in April 2008 and were the first jets in the size category to feature a flat-floor stand-up cabin and fly-by-wire.
The Safran Silvercrest is a French turbofan under development by Safran Aircraft Engines.
The Gulfstream G400, G500, and G600 (GVII) are twin-engine business jets designed and produced by Gulfstream Aerospace. The aircraft are designated Gulfstream GVII-G500 and GVII-G600 in their type certificate.
The Cessna Citation Sovereign is an American business jet developed by Cessna, part of the Cessna Citation family. Announced at the 1998 NBAA convention, the Model 680 made its maiden flight in February 2002, certification was awarded on June 2, 2004, and deliveries began in late September. The Citation Excel fuselage was stretched and joined with an all-new, larger wing and more powerful Pratt & Whitney Canada PW306C engines for increased maximum takeoff weight and a 3,200 nmi (5,900 km) range. The improved Sovereign+ was announced at the October 2012 NBAA for a first flight in April 2013 and deliveries in December, with added winglets and an improved flight deck and engines.
The Gulfstream G280 is a twin-engine business jet built by Israel Aerospace Industries (IAI) for Gulfstream Aerospace. It began delivery to users in 2012.
Nextant Aerospace is a United States-based company specializing in the remanufacturing of business jets. Founded in 2007, Nextant is the first company to introduce the concept of aircraft remanufacturing to the business jet market.
The Cessna Citation Latitude is a business jet built by Cessna. The Model 680A was announced at the 2011 NBAA convention, the prototype first flew on 18 February 2014, it achieved FAA certification on June 5, 2015, and first deliveries began on August 27. It retains the Model 680 Sovereign wing, twin P&WC PW306D turbofans and cruciform tail and adds a new stand-up circular fuselage with a flat floor, which was kept in the stretched, re-winged, and re-engined Cessna Citation Longitude.
The Pilatus PC-24 is a light business jet produced by Pilatus Aircraft of Switzerland. Following the success of the PC-12 single engine turboprop, work on the twin engine jet began in 2007 for greater range and speed, keeping the rugged airfield capability. The aircraft was introduced on 21 May 2013 and rolled out on 1 August 2014, with the maiden flight on 11 May 2015. The PC-24 received EASA and FAA type certification on 7 December 2017 and the first customer delivery was on 7 February 2018. Powered by two Williams FJ44 turbofans, it competes with the Embraer Phenom 300 and the Cessna Citation CJ4.
The Beechcraft Denali, also known as the Model 220 and previously the Cessna Denali and Textron "Single Engine Turboprop" (SETP), is an American single engine turboprop aircraft under development by Textron Aviation. Announced at EAA AirVenture Oshkosh 2015, the aircraft is a completely new design, not derived from any existing aircraft. It should compete with the Pilatus PC-12 and Daher-Socata TBM, as well as other new projects such as the One Aviation Kestrel K-350 and the CAIGA Primus 150.
The Cessna Citation Hemisphere was a business jet project by Cessna. Announced in November 2015, it was then expected to fly in 2019 but its development was suspended in April 2018 due to a delay in the development of its Safran Silvercrest engines. It was designed for Mach 0.9 and would have a 4,500 nautical miles (8,300 km) range.
The Stratos 714 is an American very light jet aircraft under development by Stratos Aircraft of Redmond, Oregon. The project was announced in July 2008, a prototype first flew on 21 November 2016, although Stratos currently lacks the funding to complete type certification. Predominantly made of carbon composite, the single turbofan aircraft would seat four to six at 400 kn (740 km/h) over up to 1,500 nmi (2,800 km).
The Cessna 408 SkyCourier is an American utility aircraft designed and built by the Cessna division of Textron Aviation. It was launched on November 28, 2017, with an order for 50 from FedEx Express, with the aircraft designed for the needs of its FedEx Feeder service. It made its first flight on May 17, 2020, and was type certified on March 11, 2022. FedEx took delivery of the first production model on May 9, 2022.