Cyclone | |
---|---|
Role | Homebuilt aircraft |
National origin | Canada |
Manufacturer | St-Just Aviation |
First flight | 1992 |
Introduction | 1992 |
Status | Production completed |
Number built | At least 26 |
Variants | St-Just Super-Cyclone |
The St-Just Cyclone, also called the St-Just Cyclone 180, is a Canadian homebuilt aircraft that was designed and produced by St-Just Aviation of Mirabel, Quebec. The company has since moved to Boucherville, Quebec. While it was available the aircraft was supplied as a kit and in the form of plans for amateur construction. [1]
The Cyclone was later developed into the higher gross weight (3,500 lb (1,600 kg)) St-Just Super-Cyclone, which superseded it in production. [1]
In 2021, the rights to the Cyclone aircraft were acquired by Bushliner Aircraft LLC of Granite Falls, WA.
The Cyclone is a replica of the Cessna 180 that incorporates modifications and improvements, such as an extended wing span, greater wing area and vertically hinged doors. It features a strut-braced high-wing, a four-seat enclosed cabin accessed via doors, fixed conventional landing gear and a single engine in tractor configuration. [1]
The aircraft is made from sheet aluminum, with the kit airframe parts preformed with pilot holes to allow construction without the use of jigs. Its 38.00 ft (11.6 m) span wing employs a NACA 2412 airfoil, mounts flaps and has a wing area of 181.00 sq ft (16.815 m2). The acceptable power range is 200 to 250 hp (149 to 186 kW) and the standard engine used is the 230 hp (172 kW) Continental O-470. [1]
The Cyclone has a typical empty weight of 1,700 lb (770 kg) and a gross weight of 3,000 lb (1,400 kg), giving a useful load of 1,300 lb (590 kg). [1]
The manufacturer estimated the construction time from the supplied kit as 2000 hours. [1]
In December 2013, 23 examples were registered in Canada with Transport Canada and three in the United States with the Federal Aviation Administration. [2] [3]
Data from AeroCrafter [1]
General characteristics
Performance
The Barrows Bearhawk, now also called the Bearhawk 4-Place, is an American amateur-built aircraft, designed by Bob Barrows and produced by R&B Aircraft of Fincastle, Virginia, AviPro Aircraft and now Bearhawk Aircraft of Austin, Texas. The aircraft is supplied as a kit or as plans for amateur construction.
The Fisher Youngster is a Canadian single-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft was inspired by the German Bücker Bü 133 Jungmeister aerobatic aircraft of the 1930s.
The Murphy Elite is a Canadian light aircraft that was designed and is produced by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.
The Jungster II is a parasol wing homebuilt aircraft. Designed by Rim Kaminskas, it first flew in March 1966.
The KIS TR-4 Cruiser is a four place composite homebuilt aircraft design.
The Pro-Composites Vision is an American amateur-built aircraft, designed by Steve Rahm and produced by Pro-Composites of Buffalo Grove, Illinois. The aircraft is supplied in the form of plans for amateur construction, with some pre-formed parts made available to speed construction.
The St-Just Super-Cyclone is a Canadian amateur-built aircraft that was at one time produced by St-Just Aviation of Boucherville, Quebec. By 2023 production had passed to Bushliner Aircraft Manufacturing of Granite Falls, Washington who were building it as the Bushliner 1850EX. The aircraft is supplied as plans or as a kit for amateur construction.
The Custom Flight North Star is a Canadian amateur-built aircraft, designed by Morgan Williams and produced by Custom Flight of Tiny, Ontario. The aircraft is based on the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.
The Rihn DR-107 One Design is an American aerobatic homebuilt aircraft that was designed by Dan Rihn and first flown in 1993. The aircraft is supplied by Aircraft Spruce & Specialty of Corona, California in the form of plans and a materials kit for amateur construction.
The Bagalini Bagalini is an Italian homebuilt ultralight aircraft that was designed by Marino Bagalini. The aircraft is supplied in the form of plans for amateur construction.
The Bagalini Baganfibio is an Italian homebuilt flying boat that was designed by Marino Bagalini. The aircraft is supplied in the form of plans for amateur construction.
The ARV Griffin is a Canadian homebuilt aircraft that was designed by Dave Marsden of the University of Alberta and produced by Canada Air RV and later by AC Millennium Corp, both of Edmonton. When it was available the aircraft was supplied as a kit for amateur construction.
The Collins Dipper was an American homebuilt flying boat that was designed and produced by Collins Aero of Chadds Ford, Pennsylvania and first flown in 1982. The aircraft was supplied in the form of plans for amateur construction. Only one was built and none remain registered.
The Historical PZL P.11c is an American homebuilt aircraft that was designed and produced by Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 66% scale replica of the Polish PZL P.11c fighter and when it was available was supplied as a kit for amateur construction.
The Let-Mont Tulak is a Czech microlight aircraft that was designed and produced by Let-Mont sro of Vikýřovice. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft or a kit for amateur construction.
The Hatz Classic is an American homebuilt biplane, designed by Billy Dawson and produced by the Makelan Corporation of New Braunfels, Texas. The aircraft is supplied as a kit or, alternatively, in the form of plans for amateur construction.
The Storm 320E, sometimes written Storm 320 E, is an Italian microlight aircraft that was designed and produced by Storm Aircraft of Sabaudia. Storm Aircraft was originally called SG Aviation srl. When it was available the aircraft was supplied as a kit for amateur construction.
The Starfire Firebolt, sometimes called the Starfire Firebolt Convertible, due to its removable canopy, is an American homebuilt aerobatic biplane that was designed by G. H. "Mac" McKenzie and produced by Starfire Aviation of Tempe, Arizona. When it was available the aircraft was supplied in the form of plans for amateur construction, with some pre-fabricated parts available.
The Tri-R KIS TR-1 is an American homebuilt aircraft that was designed by Rich Trickel and produced by Tri-R Technologies of Oxnard, California, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.
The American Homebuilts John Doe is an American STOL homebuilt aircraft that was designed by Steve Nusbaum and produced by American Homebuilts of Hebron, Illinois, first flown in 1994. When it was available the aircraft was supplied as a kit for amateur construction.