| XP-4 | |
|---|---|
 | |
| Boeing XP-4 during trials | |
| Role | Fighter |
| National origin | United States |
| Manufacturer | Boeing |
| First flight | 1927 [1] |
| Number built | 1 |
| Developed from | Boeing Model 15 |
The Boeing XP-4 was a prototype American biplane fighter of the 1920s. It was grounded permanently after just 4.5 hours of flight testing. [1]
In 1926, the United States Army was very interested in the turbo-supercharger as a way of improving engine performance, and requested that one be added to the last of the PW-9s, and the engine upgraded to a 510 hp Packard 1A-1500. This machine was designated XP-4. [1]
In addition, the basic PW-9 armament of one .50 and one .30 cal. machine guns in the nose was supplemented by two added .30 cal. guns mounted under the lower wing, far enough out to be outside the propeller arc (thus not needing synchronization). [2]
All these modifications added weight, so the lower wing span was extended by 9.5 feet.
The airplane was delivered to Wright Field for testing on 27 July 1927, but it quickly became apparent that the Packard engine did not have sufficient power to compensate for the 800 lbs of extra weight, the craft performing more poorly than its predecessor, and the project was quickly abandoned. [1]
Data from Fighters of the United States Air Force [3]
General characteristics
Performance
Armament
Related lists
The McDonnell XF-88 Voodoo was a long-range, twinjet fighter aircraft with swept wings designed for the United States Air Force. Although it never entered production, its design was adapted for the subsequent supersonic F-101 Voodoo.
The Bell XFL Airabonita was an American experimental carrier-based interceptor aircraft developed for the United States Navy by Bell Aircraft Corporation of Buffalo, New York. It was similar to and a parallel development of the U.S. Army Air Corps’ land-based P-39 Airacobra, differing mainly in the use of a tailwheel undercarriage in place of the P-39's tricycle gear. Only one prototype was built.
The Curtiss P-60 was a 1940s American single-engine single-seat, low-wing monoplane fighter aircraft developed by the Curtiss-Wright company as a successor to their P-40. It went through a lengthy series of prototype versions, eventually evolving into a design that bore little resemblance to the P-40. None of these versions reached production.
The Grumman XP-50 was a land-based development of the shipboard XF5F-1 Skyrocket fighter, entered into a United States Army Air Corps (USAAC) contest for a twin-engine heavy interceptor aircraft. The USAAC placed an order for a prototype on 25 November 1939, designating it XP-50, but it lost the competition to the Lockheed XP-49.
The P-1 Hawk was a 1920s open-cockpit biplane fighter aircraft of the United States Army Air Corps. An earlier variant of the same aircraft had been designated PW-8 prior to 1925.
The Vultee XP-68 Tornado was proposed American high-altitude interceptor aircraft. It was based on the experimental XP-54 Swoose Goose and powered by the Wright R-2160 Tornado 42-cylinder radial engine driving a set of contra-rotating propellers in a twin-boom pusher configuration. When the engine was cancelled on 22 November 1941, the XP-68 was also cancelled.
Tucker XP-57 was the designation of a lightweight fighter which was proposed to the United States Army Air Corps (USAAC) in 1940. Nicknamed the "Peashooter", it was developed by the Tucker Aviation Corporation under Preston Tucker, who later became famous for the Tucker '48 Sedan.
The Douglas XP-48 was a small, lightweight fighter aircraft, designed by Douglas Aircraft in 1939 for evaluation by the U.S. Army Air Corps. Intended to be powered by a small inline piston engine, the contract was cancelled before a prototype could be constructed, due to the Army's concerns about the projected performance of the aircraft.
The Consolidated P-30 (PB-2) was a 1930s United States two-seat fighter aircraft. An attack version called the A-11 was also built, along with two Y1P-25 prototypes and YP-27, Y1P-28, and XP-33 proposals. The P-30 is significant for being the first fighter in United States Army Air Corps service to have retractable landing gear, an enclosed and heated cockpit for the pilot, and an exhaust-driven turbo-supercharger for altitude operation.
The Boeing Model 15 was a United States single-seat open-cockpit biplane fighter aircraft of the 1920s, manufactured by the Boeing company. The Model 15 saw service with the United States Army Air Service and with the United States Navy as a carrier-based fighter.
The Boeing XP-7 was a prototype United States biplane fighter of the 1920s.
The Boeing XP-8 was a prototype American biplane fighter of the 1920s, notable for its unusual design incorporating the engine radiator into the lower wing.
The Aeromarine PG-1 was an American single-seat pursuit (fighter) and ground attack (PG) biplane developed by the Engineering Division of the United States Army and manufactured by the Aeromarine Plane and Motor Co.
The Boeing XP-15 was an American prototype monoplane fighter.
The Curtiss XP-10 was an American experimental biplane fighter developed by Curtiss and tested by the United States Army Air Corps, but rejected due to disappointing performance and major problems with the cooling system.
The Curtiss XP-31 Swift was a 1930s American experimental monoplane fighter built by Curtiss for the United States Army Air Corps.
The LUSAC-11 was an early American two-seat fighter aircraft. It was a French design, commissioned and built in the United States during World War I and ordered in large numbers by the United States Army Air Corps, but these were cancelled at the end of the war, and only 30 were built. The type was used for experimental purposes, setting several altitude records during the 1920s.
The Loening PW-2 was a 1920s American single-seat monoplane fighter designed by Grover Loening and built by his Loening Aeronautical Engineering Company.
The Verville VCP was an American single-engined biplane fighter aircraft of the 1920s. A single example of the VCP-1 was built by the United States Army Air Service's Engineering Division, which was later rebuilt into a successful racing aircraft, while a second, modified fighter was built as the PW-1.
The Pfalz Dr.II was a German triplane fighter prototype of World War I built by Pfalz Flugzeugwerke.