Curtiss XP-31 Swift

Last updated
XP-31 Swift
Curtiss XP-31 in flight 060907-F-1234P-012.jpg
Curtiss XP-31 with Vee engine
RoleExperimental monoplane fighter
Manufacturer Curtiss
First flight July 1932 [1]
Introduction 1933
Primary user United States Army Air Corps
Number built1

The Curtiss XP-31 Swift (Wright Field Project Number XP-934) was a 1930s American experimental monoplane fighter built by Curtiss for the United States Army Air Corps.

Contents

The XP-31 featured the first enclosed cockpit on a U.S. pursuit aircraft and was also the last pursuit aircraft to have fixed landing gear and externally braced wings. Despite its innovations, the XP-31 did not offer any advantages compared to its rival the Boeing P-26 Peashooter and was not ordered into series production.

Design and development

Curtiss offered the XP-31 (given the Wright Field Project Number XP-934) in a 1932 competition with the P-26. It was a low-wing monoplane with fixed landing gear, first flown in July. It was the AAC's first single-seat closed-cockpit fighter, and the last with fixed gear and wing struts. Despite its small size, it was badly overweight, and carried 125 gallons (104 imp gal, 474 L) of fuel. Although Curtiss considered the design significant in that it introduced various new technologies, compared to its contemporaries the XP-31 was already outmoded, and, more importantly, testing showed that it fell below performance expectations. [2]

Testing and evaluation

The Curtiss XP-934 in its original radial engine configuration Curtiss XP-31 with Wright R-1820 060907-F-1234P-010.jpg
The Curtiss XP-934 in its original radial engine configuration
Side view of the XP-31's original configuration Curtiss XP-31 radial side view.jpg
Side view of the XP-31's original configuration

Powered by a 700 hp (520 kW) R-1750 Cyclone radial, its performance was dismal, despite retractable leading edge slots and large trailing-edge flaps, so a 600 hp (450 kW) Curtiss V-1570 Conqueror was substituted. In this form, the Curtiss XP-31 Swift (s/n 33-178) was delivered on 1 March 1933, having already lost to the P-26. The sole example was scrapped in 1935. [2]

Operators

Flag of the United States (23px).png  United States

Specifications

Data fromU.S. Fighters: Army-Air Force 1925 to 1980s [3] and Fighters of the United States Air Force [2]

General characteristics

Performance

Armament

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

<span class="mw-page-title-main">Boeing P-26 Peashooter</span> Fighter aircraft series

The Boeing P-26 "Peashooter" was the first American production all-metal fighter aircraft and the first pursuit monoplane to enter squadron service with the United States Army Air Corps. Designed and built by Boeing, the prototype first flew in 1932, and the type was still in use with the U.S. Army Air Corps as late as 1941 in the Philippines. There are two surviving Peashooters, but there are three reproductions on display with two more under construction.

<span class="mw-page-title-main">Curtiss A-8</span> American attack aircraft

The Curtiss A-8 was a low-wing monoplane ground-attack aircraft built by the United States company Curtiss Aeroplane and Motor Company, designed in response to a 1929 United States Army Air Corps requirement for an attack aircraft to replace the A-3 Falcon. The Model 59 "Shrike" was designated XA-8.

<span class="mw-page-title-main">Curtiss P-36 Hawk</span> American fighter aircraft

The Curtiss P-36 Hawk, also known as the Curtiss Hawk Model 75, is an American-designed and built fighter aircraft of the 1930s and 40s. A contemporary of the Hawker Hurricane and Messerschmitt Bf 109, it was one of the first of a new generation of combat aircraft—a sleek monoplane design with a retractable undercarriage making extensive use of metal in its construction.

<span class="mw-page-title-main">Seversky P-35</span> 1935 fighter aircraft series by Seversky

The Seversky P-35 is an American fighter aircraft built by the Seversky Aircraft Company in the late 1930s. A contemporary of the Hawker Hurricane and Messerschmitt Bf 109, the P-35 was the first single-seat fighter in United States Army Air Corps to feature all-metal construction, retractable landing gear, and an enclosed cockpit.

<span class="mw-page-title-main">Douglas Y1B-7</span> American bomber/observation aircraft

The Douglas Y1B-7 was a 1930s American bomber aircraft. It was the first US monoplane given the B- 'bomber' designation. The monoplane was more practical and less expensive than the biplane, and the United States Army Air Corps chose to experiment with monoplanes for this reason. At the time the XB-7 was ordered, it was being tested by Douglas Aircraft as an observational plane.

<span class="mw-page-title-main">Curtiss P-60</span> 1941 fighter aircraft family

The Curtiss P-60 was a 1940s American single-engine single-seat, low-wing monoplane fighter aircraft developed by the Curtiss-Wright company as a successor to their P-40. It went through a lengthy series of prototype versions, eventually evolving into a design that bore little resemblance to the P-40. None of these versions reached production.

<span class="mw-page-title-main">Curtiss P-1 Hawk</span> 1923 fighter biplane family by Curtiss

The P-1 Hawk was a 1920s open-cockpit biplane fighter aircraft of the United States Army Air Corps. An earlier variant of the same aircraft had been designated PW-8 prior to 1925.

<span class="mw-page-title-main">Boeing YB-9</span> Prototype bomber aircraft by Boeing

The Boeing YB-9 was the first all-metal monoplane bomber aircraft designed for the United States Army Air Corps. The YB-9 was a much enlarged twin-engine development of Boeing's single-engine Model 200 Monomail commercial transport.

<span class="mw-page-title-main">Curtiss XP-71</span> Twin-engined fighter aircraft proposal

The Curtiss XP-71 was a 1941 American proposal for an exceptionally large heavy fighter design. It was intended to serve as an extreme-range interceptor and escort fighter. While significant progress was made in the design phase, no prototypes were ever built, and the design was abandoned in 1943.

<span class="mw-page-title-main">Curtiss A-18 Shrike</span> American attack aircraft

The Curtiss A-18Model 76A Shrike II was a 1930s United States twin-engine ground-attack aircraft. It was the production test version of that company's A-14 Shrike.

<span class="mw-page-title-main">Thomas-Morse MB-3</span> Type of aircraft

The Thomas-Morse MB-3 was an open-cockpit biplane fighter primarily manufactured by the Boeing Company for the U.S. Army Air Service in 1922. The MB-3A was the mainstay fighter for the Air Service between 1922 and 1925.

<span class="mw-page-title-main">Consolidated P-30</span> American two-seat fighter

The Consolidated P-30 (PB-2) was a 1930s United States two-seat fighter aircraft. An attack version called the A-11 was also built, along with 2 Y1P-25 prototypes and YP-27, Y1P-28, and XP-33 proposals. The P-30 is significant for being the first fighter in United States Army Air Corps service to have retractable landing gear, an enclosed and heated cockpit for the pilot, and an exhaust-driven turbo-supercharger for altitude operation.

<span class="mw-page-title-main">Boeing XP-9</span> Fighter aircraft prototype by Boeing

The Boeing XP-9 was the first monoplane fighter aircraft produced by the United States aircraft manufacturing company Boeing. It incorporated sophisticated structural refinements that were influential in later Boeing designs. The sole prototype exhibited unsatisfactory characteristics with its lack of pilot visibility directly leading to its cancellation.

<span class="mw-page-title-main">Boeing Model 15</span> American fighter aircraft

The Boeing Model 15 was a United States single-seat open-cockpit biplane fighter aircraft of the 1920s, manufactured by the Boeing company. The Model 15 saw service with the United States Army Air Service and with the United States Navy as a carrier-based fighter.

<span class="mw-page-title-main">Boeing XP-8</span> Fighter aircraft prototype by Boeing

The Boeing XP-8 was a prototype American biplane fighter of the 1920s, notable for its unusual design incorporating the engine radiator into the lower wing.

<span class="mw-page-title-main">Thomas-Morse XP-13 Viper</span> Prototype biplane fighter

The XP-13 Viper was a prototype biplane fighter aircraft designed by the American company Thomas-Morse Aircraft Corporation. The airplane was delivered to the United States Army in 1929, but they did not adopt it.

<span class="mw-page-title-main">Berliner-Joyce P-16</span> 1932 fighter aircraft family by Berliner-Joyce

The Berliner-Joyce P-16 was a 1930s United States two-seat fighter aircraft produced by Berliner-Joyce Aircraft Corporation.

<span class="mw-page-title-main">Curtiss YP-20</span> Prototype biplane fighter

The Curtiss YP-20 was an American biplane fighter project developed by Curtiss for the United States Army Air Service.

<span class="mw-page-title-main">Curtiss XP-10</span> Prototype biplane fighter

The Curtiss XP-10 was an American experimental biplane fighter developed by Curtiss and tested by the United States Army Air Corps, but rejected due to disappointing performance and major problems with the cooling system.

<span class="mw-page-title-main">Loening PW-2</span> Type of aircraft

The Loening PW-2 was a 1920s American single-seat monoplane fighter designed by Grover Loening and built by his Loening Aeronautical Engineering Company.

References

Notes
  1. Green and Swanborough 1994, p. 131.
  2. 1 2 3 Dorr and Donald 1990, p. 60.
  3. Jones 1975, p. 81.
Bibliography

Commons-logo.svg Media related to Curtiss XP-31 at Wikimedia Commons