The Curtiss P-60 was a 1940s American single-engine single-seat, low-wing monoplanefighter aircraft developed by the Curtiss-Wright company as a successor to their P-40. It went through a lengthy series of prototype versions, eventually evolving into a design that bore little resemblance to the P-40. None of these versions reached production.
Following rejection of the XP-46, Curtiss put forward their Model 88 in proposals to the United States Army Air Corps. was for an aircraft using the P-40D fuselage and tail assembly with a low drag NACA laminar flow wing, the (at the time under development) Continental I-1430-3 inverted V-12 engine, and eight wing-mounted 0.5in (12.7mm) machine guns.[2] This proposal was accepted and a contract for two prototypes was issued on 1 October 1940 with the aircraft designated XP-53.
Within two months the Army Air Corps contacted Curtiss for an aircraft with a laminar wing and the British Rolls Royce Merlin engine. Curtiss suggested the XP-53 design be used and the second prototype be converted while it was being built; the contract was altered to account for that with the aircraft - known to the company as Model 90 - designated XP-60. A Packard-built V-1650-1 (equivalent to the Merlin Mk XX) as being used on the Curtis XP-40F was to be used.[2] The airframe design for the XP-60 was modified for the different engine, and the main landing gear was changed from the rearward-retracting P-40 design to a new inward retracting version, as used on the XP-46, which allowed a wider wheelbase and a smooth wing surface when the gear was retracted. This aircraft first flew on 18 September 1941 with a British Merlin 28 engine. The XP-53 prototype was then converted into a static test airframe for the XP-60.
Considering delivery delays of quantities of the Packard-built Merlin engines might occue due to its use in other fighter projects closer to delivery, the use of a turbo-superchargedAllison V-1710-75 engine was considered in its place. This was expected to deliver 394 mph at 25,000 ft. Consequently, on 31 October 1941, a contract for 1,950 P-60A fighters using the Allison engine was awarded with deliveries expected in September 1942.[3]
XP-60A with Allison V-1710-75 engine
Flight tests of the XP-60 prototype did not progress smoothly. In addition to landing gear problems, expected top speed was not being met due to shortcomings in the laminar-flow wing surface finish, relatively high radiatordrag (compared to the North American P-51 Mustang, which was then flying), and lower than specified engine output performance.
The P-60A Allison engine was not delivering the requisite 1,500 hp, and now that America was at war following the Japanese attack on Pearl Harbor, delivery of existing designs took precedence over introducing a new design into production. Work on the P-60A was stopped after 20 December 1941, when the USAAF recommended that Curtiss concentrate on license production of Republic P-47 Thunderbolts.[4] The P-60 project was not stopped but a decision was taken to build experimental aircraft on the XP-60 but with different engines.[3] The new order issued on 2 January 1942 specified one XP-60A (Model 95A) with the Allison V-1710-75 engine and a General Electric B-14 turbo-supercharger, one XP-60B (Model 95B) with the Allison V-1710-75 engine and a Wright SU-504-1 turbo-supercharger, and one XP-60C (Model 95C) with the 2,500 hp 36.4 liter displacement Chrysler XIV-2220 16-cylinder V-16 engine. While the wing of the XP-60 would be used, the fuselage was more rounded in cross-section.[3]
In February 1942, the production of P-60As was cancelled so that Curtiss could build a further 1,400 P-40s and - to keep its production lines occupied until the P-60 was ready build[5] - the Thunderbolt[6][a] for the USAAF.[1]
XP-60B, with Allison V-1710-1 engine, in flight.
At the time, availability of the Chrysler engine was coming into question, and after Curtiss noted (in April) that either the fuselage would need changes of several hundreds of pounds of ballast would be needed in the tail of the existing airframe to balance the heavy engine, a decision was made in September to install a Pratt & Whitney R-2800 radial engine in the XP-60C. In the meantime, Curtiss installed a Packard V-1650-3 (equivalent of the Merlin 61) in the original XP-60 with a four bladed propeller and the larger XP-60A vertical stabilizer; this aircraft was redesignated XP-60D.
XP-60C in flightXP-60D with Merlin 61 engine
The XP-60A first flew on 1 November 1942. While official interest in the type was waning (with the emergence of newer designs), the promise of improved performance from use of the R-2800 engine, resulted in a contract for 500 aircraft, officially designated P-60A-1, with the R-2800 and contra-rotating propellers; the first 26 to be YP-60A with single rotation propeller.[7] With concern that the contra-rotating propellers would not be available on time (Pratt & Whitney had to modify the engine gearing), in order to get data, the XP-60B was modified to take the R-2800-10 engine with turbocharger driving a four-bladed propeller. As a result of the other prototype variants, this modification was redesignated XP-60E (Model 95D).
XP-60E
On 27 January 1943, the XP-60C flew for the first time, powered by an R-2800-53 engine with contra-rotating propellers. The aircraft's flying characteristics were found to be generally satisfactory. The first flight of the XP-60E with the four-bladed propeller was delayed until 26 May 1943 after it was found that due to its lighter weight, the engine installation had to be moved 10in (250mm) forward compared to the XP-60C.
In April 1943, the US Army Air Forces decided to conduct an evaluation of the various fighter aircraft in development and use, in order to eliminate the least desirable models. With four days notice Curtiss was requested to have the XP-60E participate. As the XP-60E was not available, the company hurriedly prepared the XP-60C (at the time being repaired) for the evaluation at Patterson Field. The XP-60C performed poorly due to flaking wing finish preventing laminar flow and the engine delivering less power resulting in reduction of the production run of 500 aircraft to 20 YP-60A then to just two aircraft.[8] On 6 May 1943, the XP-60D crashed during a dive demonstration.
In January 1944, the XP-60E was flown to Eglin Field for official trials, where USAAF pilots found that it did not compare favorably to contemporary aircraft designs. However, when Curtiss suggested abandoning future work on the P-60 series, the USAAF insisted on completion of at least one of the two aircraft already in production.
Operational history
The YP-60E had a redesigned rear fuselage and bubble canopy, larger engine driving a four-blade propeller.YP-60E:
Somewhat confusingly, the first production aircraft was still designated YP-60A-1-CU, although this was later changed to YP-60E, to conform with the naming of previous prototypes.
The YP-60E was powered by a 2,100hp (1,566kW) R-2800-18 engine. It also featured a cut-down rear fuselage and bubble canopy for improved visibility.
It first flew on 13 July 1944 and was subsequently delivered to Wright Field. However, as the government's development contract had already been cancelled (June 1943), there was no budget for further modifications, let alone a guarantee of a final purchase order. Consequently, the only production YP-60E completed was scrapped, on 22 December 1944.[8]
The XP-60E survived to be sold as an entry for the 1947 National Air Races, but crashed during a qualifying flight before the competition was held.[2]
Variants
XP-53
Curtiss Model 88; derivative of XP-46 to Request for Data R40-C specifications. Laminar flow wing and Continental XIV-1430-3 engine. Contracted for 1 October 1940; cancelled in favor of XP-60 in November 1941. Two built, one converted to the XP-60, the other used as a static test airframe.[9][10]
XP-60
Curtiss Model 90; Rolls-Royce Merlin engine, armament eight .50-cal (12.7 mm) machine guns. One built, first flight 18 September 1941; modified to XP-60D.[11]
Planned production version of XP-60; 1900 ordered, all cancelled.[11]
YP-60A-1
Pre-production version of P-60A-1 with single prop. Twenty-six ordered; two built; one rebuilt as YP-60E.[12]
P-60A-1
Planned production version of XP-60C with Pratt & Whitney R-2800-18 engine and contraprop; armament: four .50-cal MG. 500 ordered; cancelled before any built.[7]
XP-60B
Curtiss Model 95B; V-1710-75 engine with SU-504-2 turbosupercharger; armament: six .50-cal MG. One built, modified to XP-60E.[11]
XP-60C
Curtiss Model 95C; planned for Chrysler XIV-2220 engine, built with R-2800-53 and contra-rotating propeller; armament: six .50-cal MG. One built.[13] Rebuilt as XP-60E; original XP-60E rebuilt as XP-60C.[14]
XP-60D
Rebuilt XP-60 (Curtiss Model 90B); Packard V-1650-3 engine; crashed 6 May 1943 at Rome Air Depot when tail separated during flight.[15]
XP-60E
Rebuilt XP-60B. Curtiss Model 95D; R-2800-10 engine; crashed January 1944. XP-60C reconfigured to XP-60E status.[12]
YP-60E
Modified YP-60A-1 with bubble canopy. First flight 15 July 1944; cancelled 22 December 1944.[14]
XP-60F
Planned modification of YP-60A-1 with different model of R-2800; cancelled before conversion.[14]
The Allison V-1710 aircraft engine designed and produced by the Allison Engine Company was the only US-developed V-12 liquid-cooled engine to see service during World War II. Versions with a turbocharger gave excellent performance at high altitude in the twin-engined Lockheed P-38 Lightning, and turbo-superchargers were fitted to experimental single-engined fighters with similar results.
The Saab 105 is a Swedish high-wing, twinjet trainer aircraft developed in the early 1960s as a private venture by Saab AB. The Swedish Air Force, which had opted to procure the type for various roles, designated the aircraft SK 60. The SK 60 entered service in 1967, replacing the ageing De Havilland Vampire fleet.
The Curtiss-Wright XP-55 Ascender is a 1940s United States prototype fighter aircraft built by Curtiss-Wright. Along with the Vultee XP-54 and Northrop XP-56, it resulted from United States Army Air Corps proposal R-40C issued on 27 November 1939 for aircraft with improved performance, armament, and pilot visibility over existing fighters; it specifically allowed for unconventional aircraft designs. An unusual design for its time, it had a canard configuration with a rear-mounted engine, and two vertical tails at end of swept wings. Because of its pusher design, it was satirically referred to as the "Ass-ender". Like the XP-54, the Ascender was designed for the 1,800 hp Pratt & Whitney X-1800 24-Cylinder H-engine, but was redesigned after that engine project was canceled. It was also the first Curtiss fighter aircraft to use tricycle landing gear.
The Heinkel He 60 was a German single-engined biplane reconnaissance seaplane designed to be catapulted from Kriegsmarine warships of the 1930s.
The Consolidated Vultee XP-81 is a development of the Consolidated Vultee Aircraft Corporation to build a single seat, long range escort fighter that combined use of both turbojet and turboprop engines. Although promising, the lack of suitable engines combined with the end of World War II doomed the project.
The Curtiss XP-46 was a 1940s American prototype fighter aircraft. It was a development of the Curtiss-Wright Corporation in an effort to introduce the best features found in European fighter aircraft in 1939 into a fighter aircraft which could succeed the Curtiss P-40, then in production.
The Curtiss XP-62 was a prototype single-engine interceptor aircraft, that was built for the United States Army Air Forces, by the Curtiss-Wright Corporation. It first flew in 1943.
The McDonnell XP-67 "Bat" or "Moonbat" was a prototype for a twin-engine, long-range, single-seat interceptor aircraft for the United States Army Air Forces. Although the design was conceptually advanced, it was beset by numerous problems and never approached its anticipated level of performance. The project was canceled after the sole completed prototype was destroyed by an engine fire.
The Republic XP-69 was an American fighter aircraft proposed by Republic Aviation in 1941 in response to a requirement by the United States Army Air Corps for a high-speed fighter. Manufacturers were encouraged to consider unorthodox designs; although the design was ordered as a prototype it was canceled because of delays with the engine that was to power it.
The Curtiss P-6 Hawk is an American single-engine biplane fighter introduced into service in the late 1920s with the United States Army Air Corps and operated until the late 1930s prior to the outbreak of World War II.
The Curtiss XP-42 was an experimental fighter built by Curtiss Aircraft in the late 1930s to research engine cooling and improving the performance of the Curtiss P-36 Hawk.
The Consolidated P-30 (PB-2) was a 1930s United States two-seat fighter aircraft. An attack version called the A-11 was also built, along with 2 Y1P-25 prototypes and YP-27, Y1P-28, and XP-33 proposals. The P-30 is significant for being the first fighter in United States Army Air Corps service to have retractable landing gear, an enclosed and heated cockpit for the pilot, and an exhaust-driven turbo-supercharger for altitude operation.
The Curtiss P-40 Warhawk was a WWII fighter aircraft that was developed from the P-36 Hawk, via the P-37. Many variants were built, some in large numbers, under names including the Hawk, Tomahawk, and Kittyhawk.
The Curtiss YP-20 was an American biplane fighter project developed by Curtiss for the United States Army Air Service.
The Curtiss XP-22 Hawk was a 1930s American experimental biplane fighter built by Curtiss for evaluation by the United States Army Air Service.
Over twenty variants of the North American P-51 Mustang fighter were produced from 1940, when it first flew, to after World War II, some of which were employed also in the Korean War and in several other conflicts.
The Curtiss P-37 was an American fighter aircraft made by Curtiss-Wright in 1937 for the US Army Air Corps. A development of the Curtiss P-36 Hawk to use an inline engine instead of the radial engine of the P-36 the fuselage was lengthened and the cockpit moved back. A small number of YP-37 aircraft was built for Air Corps evaluation. The expected top speed was not achieved and the project terminated in favor of the Curtiss P-40.
Colville Air Force Station is a closed United States Air Force General Surveillance Radar station. It is located 14.7 miles (23.7 km) east-northeast of Colville, Washington. It was closed in 1961.
The Gotha Go P.60 was a jet-powered flying wing fighter proposed during World War II by Gothaer Waggonfabrik (Gotha). The initial concept a two-seat multi-role fighter that was subsequently developed into a three-seat night and all-weather fighter, but no variant was ever built.
The P-47 Thunderbolt is a World War II fighter aircraft built by Republic Aviation from 1941 to 1945.
Bowers, Peter M. Curtiss Aircraft, 1907–1947. London: Putnam & Company Ltd., 1979. ISBN978-0-370-10029-6.
Dorr, Robert F. and Jon Lake. Fighters of the United States Air Force. London: Temple Press, 1990. ISBN978-0-600-55094-5.
Green, William. War Planes of the Second World War, Volume Four: Fighters. London: MacDonald & Co. (Publishers) Ltd., 1961 (Sixth impression 1969). ISBN978-0-356-01448-7.
Green, William and Gordon Swanborough. WW2 Aircraft Fact Files: US Army Air Force Fighters, Part 1. London: Macdonald and Jane's Publishers Ltd., 1977. ISBN978-0-356-08218-9.
Jones, Lloyd S. U.S. Fighters: 1925-1980s. Fallbrook, California: Aero Publishers, Inc., 1975. ISBN978-0-8168-9200-6.
Norton, Bill. U.S. Experimental & Prototype Aircraft Projects: Fighters 1939–1945. North Branch, Minnesota: Specialty Press, 2008, pp.80–85. ISBN978-1-58007-109-3.
External links
Wikimedia Commons has media related to Curtiss XP-60.
1 Not assigned •2 Unofficial •3 Assigned to multiple types See also: "F-19" •1919–1924 sequence
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
