| Spartan C2 | |
|---|---|
 | |
| Role | sport aircraft |
| National origin | United States |
| Manufacturer | Spartan Aircraft Company |
| Designer | Willis Brown [1] |
| First flight | 1931 [2] |
| Number built | over 56 [1] |
The Spartan C2 is a light aircraft produced in the United States in the early 1930s as a low-cost sport machine that would sell during the Great Depression.
The C2 is a conventional, low-wing monoplane design with two seats side-by-side in an open cockpit. [2] [3] The wing was braced with struts and wires and it carried the main units of the divided fixed undercarriage. Power was supplied by a small radial engine mounted tractor-fashion in the nose, which drove a two-bladed propeller.
Spartan introduced the C2 in 1931 with a 55-hp engine, and sold 16 examples before ongoing economic circumstances brought production to a halt. [2] Spartan then built 2 examples with 165-hp engines to use in their own flying school. These latter aircraft were fitted with hoods that could be closed over the cockpit for training pilots in instrument flying. [1] [4] Spartan offered this version to the U.S. military as a trainer, [5] but officials at the time believed that low-wing monoplanes were unsuitable for pilot training. [4] Spartan also tendered a proposal to the U.S. Bureau of Air Commerce to provide its inspectors with a two-seat light aircraft. [5] The design in question was probably the C2-60, [5] but in any case, the tender was not accepted. [5]
Three C2s are preserved in museums — a restored example on display at the Tulsa Air and Space Museum, [6] a restored and flyable example at the Western Antique Aeroplane & Automobile Museum in Hood River, Oregon, and an example awaiting restoration at the Golden Wings Flying Museum, Blaine, Minnesota. [7]
Data from Jane's all the World's Aircraft 1931, [8] Aerofiles: Spartan [1]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Pitcairn Mailwing family is a series of American mail carrier and three-seat sport utility biplane aircraft produced from 1927 to 1931.
The Cunningham-Hall Model PT-6 was an American six-seat cabin biplane aircraft of the late 1920s and was the first design of the Cunningham-Hall Aircraft Corporation of Rochester, New York.
The Buhl-Verville CA-3 Airster, was a utility aircraft built in the United States in 1926, notable as the first aircraft to receive a type certificate in the US, issued by the Aeronautics Branch of the Department of Commerce on March 29, 1927. It was a conventional single-bay biplane with equal-span unstaggered wings and accommodation for the pilot and passengers in tandem open cockpits. Marketed for a variety of roles including crop-dusting, aerial photography, and freight carriage, only a handful were built, some with water-cooled engines as the CW-3, and others with air-cooled engines as the CA-3. One CA-3 placed second in the 1926 Ford National Reliability Air Tour.
The Harlow PJC-2 is a 1930s American four-seat cabin monoplane, designed by Max Harlow.
The Travel Air 2000 is an open-cockpit biplane aircraft produced in the United States in the late 1920s by the Travel Air Manufacturing Company. During the period from 1924–1929, Travel Air produced more aircraft than any other American manufacturer, including over 1,000 biplanes. While an exact number is almost impossible to ascertain due to the number of conversions and rebuilds, some estimates for Travel Air as a whole range from 1,200 to nearly 2,000 aircraft.
The Bullet Monoplane or Alexander Eaglerock Bullet was a low wing cabin monoplane that was a departure from traditional biplane aircraft of the era.
The Spartan C4 was an American four-seat cabin monoplane designed and built by the Spartan Aircraft Company.
The Spartan C3 is an American three-seat open-cockpit utility biplane from the late 1920s.
The Spencer Amphibian Air Car is an American light amphibious aircraft. The name was first used in 1940 for a prototype air vehicle that developed into the Republic Seabee. The name was later used by its designer Percival Spencer for a series of homebuilt amphibious aircraft roughly based on the Seabee design.
The Stout Skycar is a series of four one-off American light aircraft of the 1930s.
The Custer CCW-5 was a twin-engined, 5-seat aircraft of pusher configuration, which used a channel wing claimed to enable low speed flight and short take-offs. Two CCW-5s flew, eleven years apart, but the type never entered production.
The Thaden T-4 Argonaut was a 1930s American four-seat all-metal cabin monoplane built by the Thaden Metal Aircraft Company of San Francisco, California.
The Supermarine Type 179 "Giant" was a British monoplane flying boat developed by Supermarine but cancelled before completion.
The Solar MS-1 was an American prototype all-metal sesquiplane airliner built in 1930.
The Bellanca TES or Blue Streak was a push-pull sesquiplane aircraft designed by Giuseppe Mario Bellanca in 1929 for the first non-stop flight from Seattle to Tokyo.
The Church Midwing JC-1, a.k.a. Church Mid-Wing Sport, is a midwing racing aircraft designed by James Church using the fuselage of a Heath aircraft.
The Lambert Mission 212 is a conventionally laid out low-wing, fixed undercarriage, single-engine, four-seat kit built aircraft designed in the UK by a Belgian college student. Kits are manufactured in Belgium.
The IAR-811 was a Romanian trainer aircraft built in the late 1940s. It was the first aircraft designed and built in Romania following the end of the Second World War.
The Stiles Dragon Fly was an American two seat monoplane aircraft of the late 1920s. It was aimed at private and club owners. Significant production was planned but few were built.
The Butler Blackhawk and the Skyway from which it was developed were American three-seat open-cockpit single engine biplanes of the late 1920s that were built in small numbers immediately prior to having their intended production run interrupted by the onset of the Great Depression.
