Mitsubishi B4M

Last updated
B4M
Mitsubishi B4M1.jpg
Role Torpedo bomber
Manufacturer Mitsubishi
DesignerHajime Matsuhara
First flightAugust 1934
Primary user Imperial Japanese Navy
Number built2
Developed from Mitsubishi 3MT10

The Mitsubishi Ka-12 or B4M was a Japanese carrier-based torpedo bomber of 1934. Two prototypes were built by Mitsubishi for the Imperial Japanese Navy. A development of the company's 3MT10 of 1932, the design differed primarily in the use of a radial engine and metal wing, which made the whole aircraft significantly lighter and faster. However, the design could not realise its potential as the wing was inefficiently stiff and the B4M was not selected for production. The competing Yokosuka B4Y was chosen to serve on the Navy's aircraft carriers instead.

Contents

Design and development

In 1933, the Japanese Navy still relied on the Mitsubishi B1M as the backbone of its carrier-borne attack force. The Yokosuka B3Y was starting to enter service, developed in response to the 7-shi, competition. [1] However, already, the new aircraft was suffering engine reliability and other problems, and an early replacement was deemed expedient. [2] The B3Y had seen off competition from Mitsubishi and Nakajima, and both were invited, along with Yokosuka, to enter a design to the ensuing 9-shi competition in February 1934. [3]

In response, Mitsubishi submitted a design based on their unsuccessful 7-shi entry, the 3MT10. However, instead of the bulky Rolls-Royce Buzzard V-12, a less powerful but lighter experimental Mitsubishi 8-Shi radial engine was fitted. Despite having an expected power rating of 650 hp (480 kW), substantially less than the 835 hp (623 kW) of the Buzzard, the much reduced weight enabled the designer Hajime Matsuhara to substantially reduce the total weight of the aircraft by 590 kg (1,300 lb). Weight-saving measures included introducing aluminium wings and removing the wheel fairings. Overall, the effect of these changes were to increase the theoretical speed to 270 kilometres per hour (170 mph). [4]

Matsuhara's final Ka-12 design was a single bay biplane of composite construction, with a fabric covered wooden frame fuselage and metal upper wings. The lower wings were of a new inverse gull shape, with fixed undercarriage attached to the wing and fuselage. The undercarriage had a wide track to allow for the carriage of a single 800 kg (1,800 lb) torpedo or the equivalent weight in free-fall bombs. The three crew were seated in open cockpits and shared a total of three 7.7 mm (0.30 in) machine guns, two mounted on flexible mounts firing aft and a single fixed mounting firing forward. [5]

Operational history

The first prototype was completed and first flew in August 1934. [4] The aircraft was designated B4M1 by the Navy and flown against designs from both Nakajima and Yokosuka. Performance was considered superior to the aircraft in service, but the aircraft was unstable and difficult to fly. The lack of stiffness in the aluminium wing caused problems and the aircraft could not safely fly at its theoretical maximum speed. A second prototype designated was built with design changes, including a new nose fairing for the engine and a tailwheel instead of a skid, but these did not solve all the problems. [5] The Navy rejected the design and the competing Yokosuka B4Y was chosen for production instead. However, Mitsubishi did gain some consolation from the outcome as they eventually produced 135 of the Yokosuka type. [3]

Operators

Flag of Japan.svg  Japan

Specifications (B4M1)

Data from Japanese Aircraft 1910-1941 [4]

General characteristics

Performance

Armament

See also

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

<span class="mw-page-title-main">Nakajima A4N</span> Japanese carrier-based fighter aircraft

The Nakajima A4N was a carrier-based fighter used by the Imperial Japanese Navy, and the last biplane designed by Nakajima. The first prototype was completed in 1934, but due to engine trouble the aircraft did not see service until 1936. Given the Nakajima internal designation Nakajima YM, the Japanese Navy designation was Navy Type 95 Carrier Fighter. A total of 221 were built. It saw combat in the Second Sino-Japanese War in the late 1930s.

<span class="mw-page-title-main">Yokosuka B4Y</span> Japanese carrier-borne torpedo bomber

The Yokosuka B4Y was a carrier-borne torpedo bomber used by the Imperial Japanese Navy Air Service from 1936 to 1943. The B4Y replaced the Mitsubishi B2M2 and the Yokosuka B3Y, and was the last biplane bomber used operationally by the Imperial Japanese Navy. The Allied reporting name was "Jean".

<span class="mw-page-title-main">Mitsubishi B2M</span> Japanese torpedo bomber

The Mitsubishi B2M was a Japanese carrier-based torpedo bomber of the 1920s and 1930s. It was built by Mitsubishi to a design by Blackburn Aircraft of Britain and was operated by the Imperial Japanese Navy.

<span class="mw-page-title-main">Kugisho B3Y</span> Japanese torpedo bomber

The Kugisho B3Y, or Navy Type 92 Carrier Attack Bomber, also popularly titled Yokosuka B3Y, was a Japanese carrier-based torpedo bomber of the 1930s. It was designed by the Naval Air Technical Arsenal at Yokosuka, and while unimpressive during testing, it was ordered into service by the Imperial Japanese Navy and used until replaced by more capable aircraft.

The Nakajima Ki-19 was an unsuccessful attempt by Nakajima Aircraft Company to meet a 1935 requirement issued by the Japanese government for a modern bomber to replace the Mitsubishi Ki-1 heavy bomber.

<span class="mw-page-title-main">Mitsubishi 2MR8</span> Type of aircraft

The Mitsubishi Army Type 92 Reconnaissance Aircraft (九二式偵察機) was a Japanese short-range reconnaissance aircraft of the 1930s designed by Mitsubishi for the Imperial Japanese Army Air Force. A total of 230 were built, serving between 1933 and 1936. A parasol monoplane, the Type 92 was the first military aircraft powered by an engine both designed and manufactured in Japan to enter service.

The Nakajima C3N-1 was a prototype Japanese carrier-based reconnaissance aircraft of the 1930s. A single-engine monoplane with a fixed undercarriage, although only two examples were built, they were both used operationally, carrying out land-based reconnaissance missions during the Second Sino-Japanese War.

<span class="mw-page-title-main">Yokosuka E1Y</span> Japanese reconnaissance floatplane

The Yokosuka E1Y was a Japanese floatplane of the 1920s. A single-engined biplane that was designed and developed by the Yokosuka Naval Air Technical Arsenal as a reconnaissance aircraft for the Imperial Japanese Navy, 320 were built as the Type 14 Reconnaissance Seaplane, entering service in 1925 and remained in operational service until 1932.

The Nakajima B3N was a prototype Japanese carrier-based torpedo-bomber aircraft of the 1930s. A single-engined biplane with a crew of three, it was unsuccessful, only two being built.

<span class="mw-page-title-main">Yokosuka K4Y</span> Japanese floatplane trainer

The Yokosuka K4Y was a Japanese floatplane trainer of the 1930s. A single engined two-seat biplane, 211 K4Ys were built between 1933 and 1940, serving as the Imperial Japanese Navy's basic floatplane trainer throughout the Second World War.

The Aichi AB-6, or Aichi Experimental 7-Shi Reconnaissance Seaplane, was a prototype Japanese reconnaissance floatplane. It was a single-engined, three-seat biplane intended for the Imperial Japanese Navy, but only one was built, the rival aircraft from Kawanishi, the E7K being preferred.

The Aichi F1A was a prototype Japanese floatplane of the 1930s. A single-engined biplane, the F1A was intended as a short-range observation aircraft suitable for operation off the Imperial Japanese navy's warships, but only two were built, the Mitsubishi F1M being selected instead.

<span class="mw-page-title-main">Mitsubishi 3MT5</span> Japanese bomber

The Mitsubishi 3MT5 was a Japanese bomber of the 1930s. It was a twin-engined biplane that was intended to operate from Japanese aircraft carriers, but proved to be unsuitable for carrier use, and the eleven aircraft built were instead used as land-based trainers.

<span class="mw-page-title-main">Mitsubishi G1M</span> Japanese attack bomber

The Mitsubishi G1M was a long-range twin-engined attack bomber built by Mitsubishi for the Imperial Japanese Navy in the 1930s.

The Kawanishi E10K, also known as Kawanishi Type T, Kawanishi Navy Type 94 Transport Seaplane and Kawanishi Navy Experimental 9-Shi Night Reconnaissance Seaplane, was a small Japanese flying boat of the 1930s. It was a single-engined biplane intended to meet a requirement for a night reconnaissance aircraft for the Imperial Japanese Navy, but was not selected for production, the single prototype being converted to a transport and operated as the Navy Type 94 Transport.

<span class="mw-page-title-main">Mitsubishi 1MF10</span> Japanese carrier-based fighter prototype

The Mitsubishi 1MF10 or Mitsubishi Experimental 7-Shi Carrier Fighter (七試艦上戦闘機) was a prototype Japanese monoplane single-seat carrier-based fighter aircraft of the 1930s. Two were built for the Imperial Japanese Navy, but both were lost in crashes, with no production following.

The Mitsubishi Ka-8 or Mitsubishi Experimental 8-Shi Two-seat Fighter was a prototype Japanese two-seat carrier-based fighter aircraft of the 1930s. Two were built, but no production followed.

The Yokosuka E6Y was a Japanese submarine-based reconnaissance seaplane developed at the Yokosuka Naval Air Technical Arsenal for the Imperial Japanese Navy during the 1920s. The prototype first flew as the Yokosho 2-Go in 1929.

The Kawanishi K8K was a Japanese floatplane trainer designed and built by the Kawanishi Aircraft Company for the Imperial Japanese Navy. It was selected for production, but only a small number were built before a change in the Japanese Navy's training needs led to production being stopped.

The Watanabe K8W was a Japanese floatplane trainer designed and built by Watanabe for the Imperial Japanese Navy.

References

Citations

Bibliography