F-X | |
---|---|
Concept design of F-X fighter | |
Role | Stealth air superiority fighter |
National origin | Japan |
Manufacturer | Mitsubishi Heavy Industries |
First flight | 2028 (planned) [1] |
Introduction | 2035 (planned) [1] |
Status | Merged into Global Combat Air Programme [2] |
Primary user | Japan Air Self-Defense Force (planned) |
Produced | 2024 (first prototype production planned) [1] 2031 (full-scale production planned) [1] |
Developed from | i3 fighter Mitsubishi X-2 Shinshin |
The Mitsubishi F-X (unofficially called F-3) is a sixth-generation stealth fighter in development for the Japan Air Self-Defense Force (JASDF). It is Japan's first domestically developed stealth fighter jet and will replace the Mitsubishi F-2 by the mid-2030s. [1] Its development is to also bolster the nation's defense industry and potentially enter the international arms market amid Japan's change in defense posture. [3] In October 2020, Mitsubishi Heavy Industries was selected as the lead developer. [4]
On 9 December 2022 the governments of Japan, the United Kingdom, and Italy jointly announced that they would develop and deploy a common fighter jet under a project called the Global Combat Air Programme (GCAP); merging development of the latter two nations' BAE Systems Tempest with the F-X. [5] In Japan, Mitsubishi Heavy Industries will be the prime contractor, with IHI Corporation handling the engines and Mitsubishi Electric handling the electronics. In the UK, BAE Systems will handle the aircraft, Rolls-Royce the engines and Leonardo UK the electronics. Leonardo, Elt Elettronica Group and Avio Aero will participate in the development from Italy, and MBDA will also participate in the missile development.
By around 2024, detailed development and cost sharing for each company will be clarified, and production will begin around 2030, with the first aircraft to be deployed in 2035. In addition, joint development with the United States will begin in fiscal 2023 for an unmanned aircraft accompanying the F-3. [6]
The F-X program began when the United States banned exports of the Lockheed Martin F-22 Raptor as part of the 1997 Obey amendment in order to safeguard its technology. [7] With Japan no longer able to purchase the F-22, a domestically developed fighter was chosen instead to replace Japan's aging fleet of fighter jets. Between December 2009 and August 2010, the Ministry of Defense (MoD) conducted a study of developing a future fighter jet to replace the F-2. [8] The research conducted called for a new fighter jet that would be a generation ahead of contemporary fifth-generation fighters. [9] The concept fighter was named the i3 Fighter (Informed, Intelligent, Instantaneous). Some technology and capabilities the concept fighter is to possess include advanced radar systems to counter stealth technology of other fighters, receiving targeting information from other platforms (drones, fighters and/or airborne early warning and control aircraft), use of fly-by-optics (much like the Kawasaki P-1) to process information faster, stealth technology, gallium nitride semiconductors to improve radar performance, and a new, more powerful engine. [9]
Much of the development of the F-X program correlates with the development of the Mitsubishi X-2 Shinshin. The development of the X-2 demonstrator allows Japan to obtain new information and develop new technology related to their next generation fighter jet. The X-2 made its maiden flight on 22 April 2016. The X-2's testing concluded in March 2018. [10]
Concurrent to the X-2's development and testing, evaluations were made on various researches related to the F-X. These researches and tests continue as Japan sought international collaboration on the F-X.
Evaluation period | Name of evaluation | Development time period | Total cost | Purpose |
---|---|---|---|---|
October 2009 | Study on advanced integrated sensor system [11] | Prototype: 2010 - 2014 Testing: 2014 - 2016 | ¥500 million | Detect stealth aircraft using various sensors working in tandem with each other |
Research on aerodynamic technology for weapon internalization [12] | Prototype: 2010 - 2013 Testing: 2013 - 2014 | ¥1.3 billion | Simulate the separation of internal weapons from weapons bay to study aerodynamic phenomenon acting on the mounted object at transonic and supersonic speed | |
Research on main components of next-generation engine [13] | Prototype: 2010 - 2014 Testing: 2014 - 2015 | ¥100 million | Achieve high thrust-to-weight ratio for next-generation engine by developing high-temperature combustor, high-temperature/high-pressure turbine and light-weight compressor | |
July 2011 - August 2011 | Research on integrated fire control technology for fighters [14] | Prototype: 2012 - 2016 Testing: 2015 - 2017 | ¥9.1 billion | Develop a Network centered battlespace that connects to various assets for numerically inferior stealth aircraft |
July 2012 - September 2012 | Study on engine elements for fighters [15] | Prototype: 2013 - 2017 Testing: 2015 - 2017 | ¥172 billion | Design high power engine to be slim and possess high thrust |
Research on weapon release/stealth [16] | Prototype: 2013 - 2017 Testing: 2016 - 2017 | ¥3.8 billion | Develop internal weapons bay to reduce RCS and drag | |
Research on advanced RF self-defense simulation [17] | Prototype: 2013 - 2016 Testing: 2015 - 2018 | ¥1.6 billion | Develop electronic warfare equipment to counter aircraft and missiles | |
July 2013 - August 2013 | Study on high power microwave technology [18] | Prototype: 2014 - 2017 Testing: 2016 - 2018 | ¥1.8 billion | Develop high power microwave technology to neutralize incoming missile |
Study on high resolution technology of infrared image [19] | Prototype: 2014 - 2017 Testing: 2016 - 2019 | ¥3.8 billion | Enhance resolution of infrared imaging technology for various platforms, i.e. fighter jets | |
Research on airframe structure weight reduction technology [20] | Prototype: 2014 - 2017 Testing: 2017 - 2018 | ¥5.7 billion | Utilize high-precision stress analysis technology to reduce weight of future fighter air-frame and analyze strength risk associated with weight reduction | |
July 2014 - August 2014 | Study on technical feasibility of future fighters [21] | Prototype: 2015 - 2017 Testing: 2016 - 2017 | ¥5.4 billion | Develop virtual vehicle design to determine on whether to develop an F-2 successor |
Study on engine system for fighter [22] | Prototype: 2015 - 2018 Testing: 2017 - 2019 | ¥14.2 billion | Develop and trial the XF9 engine | |
Study on electric actuation technology [23] | Prototype: 2015 - 2017 Testing: 2018 | ¥2.3 billion | Develop electric actuators to replace conventional hydraulic system | |
Study on radome for stealth fighter [24] | Prototype: 2015 - 2019 Testing: 2018 - 2020 | ¥5.4 billion | Design a radome to protect radar and maximize aerodynamic, stealth and radar performance | |
Study on future HMD system [25] | Prototype: 2015 - 2018 Testing: 2018 - 2019 | ¥3.5 billion | Develop future HMD system with wide field of vision and binocular, multi-color display | |
July 2015 - August 2015 | Study on thrust deflection nozzle [26] | Prototype: 2016 - 2019 Testing: 2017 - 2020 | ¥2.3 billion | Develop thrust deflecting nozzle to achieve high maneuverability, reduce steering area and improve stealth |
Study on small heat transfer system for future fighters [27] | Prototype: 2016 - 2019 Testing: 2018 - 2020 | ¥1.9 billion | Develop cooling system based on vapor cycle | |
In mid-September 2019, flight tests were conducted on integrated sensors to be used for the F-X. The sensors were tested on board an F-2 fighter and the results are said to be good. [28]
In March 2017, Japan and U.K. signed an agreement to explore the possibility on co-developing a future fighter jet. [29] [30] By March 2018, a MoD representative has stated that the Japanese government is deciding whether to develop the F-X domestically, through joint-development, or develop it based on an existing fighter design. At the time the Japanese government sent out proposals to the U.S. and U.K., seeking out their participation in the project. [31] Boeing, Lockheed Martin, BAE Systems and Northrop Grumman have responded to the proposal. It is reported that Boeing offered an upgraded fighter based on their F-15, while similarly BAE systems offered their Eurofighter Typhoon. [32] Lockheed Martin proposed a F-22/35 hybrid fighter while also offering Japan the majority of the work in developing and producing the fighter. [33] [34] Northrop Grumman has expressed interest in joining the project; [35] with speculation that a modernized YF-23 might be offered to Japan. [36] Japan and U.K. have also further explored the possibility on collaborating the F-X project with the Tempest project to some capacity. [37]
By October 2018, the MoD has begun to rule out the possibility of developing a fighter based on existing designs. Boeing's F-15 and BAE Systems' Eurofighter Typhoon reportedly failed to meet the ministry's requirements. [32] Lockheed Martin's hybridized stealth fighter was also met with doubt due to its expensive price, as well as uncertainties that the U.S. would allow the sale given the export ban on the F-22. [32] One report indicated that the hybrid fighter could cost as high as $177 million per aircraft. [38]
In early February 2019, the MoD announced that a 'Japan-led' Future Fighter program will be initiated, with collaboration with foreign defense contractors still being an option. The announcement further enforces that plans to develop or locally produce existing foreign-made fighter jets has been ruled out. Furthermore, the program will prioritize domestic industries to develop and produce the stealth fighter. The program will occur between 2019 and 2023 in line with the MoD's Mid-Term Defense Program and will take 15 years to complete; around the time when the F-2 begins to retire. [39] [40] The MoD prioritized five key aspects for the program's development: [41]
On 21 August 2019, the MoD announced that development of the stealth fighter will commence between April–December 2020 in accordance to the FY 2020 defense budget. The funding that the MoD acquires will be used to initiate the fighter program. [42] By December 2019, the MoD secured ¥11.1 billion for the FY 2020 defense budget to launch the program. [43] In total ¥28 billion is used to fund the F-X development for FY 2020. Of the total budget, ¥16.9 billion (60%) is used for research projects, while the remaining ¥11.1 billion (40%) is used to launch the program and begin conceptional design. It is within the FY 2020 defense budget that a new conceptional image of the stealth fighter has been revealed and the name of the program has been officially changed from "Future Fighter" to "F-X". [44] [45]
On 27 March 2020, Japan rejected designs proposed by Lockheed Martin, Boeing and BAE Systems. The designs submitted by all three defense contractors include: a hybridized F-22/35 fighter, a design based on the Boeing F/A-18E/F Super Hornet, and another based on the Eurofighter Typhoon respectively. According to an official from the Acquisition, Technology & Logistics Agency (ATLA) the designs did not meet their requirements and that no decision has been reached on the air-frame design. The decision places Mitsubishi Heavy Industries at the forefront in developing the stealth fighter. However, the decision did not rule out the possibility of international collaboration; as Lockheed Martin, Boeing, Northrop Grumman and BAE Systems are still listed as potential partners. [46] This decision was further confirmed by Jane's. An ATLA spokesperson has stated that "the option of 'developing derivatives of existing fighters' cannot be a candidate from the perspective of a Japan-led development, and the MoD has come to the conclusion that we will develop a new model". The spokesperson further elaborated the MoD has developed enough technology to possibly develop the F-X domestically, but the option of international collaboration still exists. [47] On 1 April 2020, ATLA established a dedicated team to develop the F-X. The team is led by a major-general from the Japan Air Self-Defense Force (JASDF) and consists of 30 JASDF officers, engineering officials and others. [48] Subaru Corporation also announced that it will establish a Technology Development Center to support the F-X's development. [49]
As of July 2020 [update] , the MoD expects production of the first fighter prototype to begin in 2024, with flight tests starting in 2028. Full-scale production is expected to commence by 2031. [1]
In June 2021, Japan said that it was in discussions with British officials regarding the cooperation with Rolls-Royce on engine development. [50]
On 9 December 2022, the governments of Japan, the United Kingdom, and Italy jointly announced that they would develop and deploy a common fighter jet, merging their previously separate sixth-generation projects into: Global Combat Air Program . Japan's merger into this multinational effort effectively ends the separate Japan F-X fighter program.
The F-X is a twin engine stealth fighter designed for achieving air superiority. By the Japanese MoD's own terminology, the technology and capabilities the F-X possesses will classify it as a sixth generation fighter jet. [8]
The F-X is said to be bigger than the F-22, which has earned it the nickname "Godzilla" from Bradley Perrett at Aviation Week. The large size indicates the MoD desires the aircraft to possess very long range and large payload capacity. Technologies tested in the X-2 technology demonstrator will likely be incorporated into the F-X fighter. [51] Defense Minister Taro Kono has stated that the F-X will possess strong network capabilities and will carry more missiles than the F-35. [52]
In the design process, conceptual designs of the F-X are made, then passed through a 3-D digital mock-up system. Designs are based on the assumed function and performance of the F-X, and then installed in a research flight/battle simulator developed by the Technical Research Division. Data on avionics, stealth and engine characteristics are inputted into the simulator, and are then tested by JASDF pilots. Through air-to-air combat simulations, the effectiveness and improvements to the mock-up design are gauged. [53]
Compared to its predecessor, the F-X replaces the usage of conventional hydraulic systems with electric actuators. According to the MoD's evaluation, the reason for selecting electric actuators over hydraulic systems is because of the complexity of designing the interior of the stealth fighter. When designing the stealth shape of the aircraft, the internal weapon bay and intake air-ducts must be accounted for. However, problems arise with installing hydraulic system piping due to design considerations such as rigidity and length. The adoption of electric actuators eliminates these constraints because they are only connected via electric wiring. This results in simplified installation and reduced restrictions, allowing more flexibility in designing the body of the aircraft. [23] Other advantages include weight reduction and improved mobility of the aircraft. [54] The electric actuators are used in the fighter's flight control systems and undercarriage/wheel braking systems. [55]
To achieve a lightweight body structure, the F-X implements several technologies and manufacture/design techniques. One method involves reducing or eliminating the use of fasteners by bonding composite materials together through adhesive molding. This method is dubbed the "integrated/fastenerless structure" technology. Heat shield technology is placed around the engines to allow aluminum alloys and carbon-fiber reinforced polymer (CFRP) to be applied to reduce weight. High-efficiency/high-accuracy structural analysis techniques used for the F-X involve creating finite element method (FEM) models using computer-aided design (CAD) to study and create stress analysis standards for the F-X. The F-X's predecessor, the F-2, introduced integrated molding and CFRP material to reduce its overall weight, but the molding technique applied only on the bottom plates of the wings; requiring fasteners to be placed through the upper plates in the main wing and other areas using fasteners on both plates. In comparison, the F-X expands the application of CFRP and adhesive molding to the entire fuselage. From the MoD's research, it was shown that adopting the new design methods can reduce the structural mass of the F-X's airframe by 11.6% and – for a portion of the middle fuselage – reduce working man-hours by 66% compared to conventional approaches. [56] [57]
To cope with the heat produced by the avionic systems, a small dedicated heat transfer system is installed in the F-X to assist its air cycle and liquid cooling system. The heat transfer system is modeled on the vapor-compression refrigeration cycle. [58]
To improve detection against stealth aircraft, the F-X utilizes integrated sensors. The sensors include: an active electronically scanned array (AESA) radar, passive radio frequency (RF) sensor, and an infrared camera. Both the AESA radar and RF sensor utilize Gallium nitride (GaN) to improve its performance. [28] The AESA radar is based on the J/APG-2 radar used on the F-2 fighter and is similar to the AN/APG-81 radar used in the F-35.[ citation needed ]
The F-X possess a RF 'self-defense' system to counter aircraft, air-to-air missile and surface-to-air missile threats. The system performs both ESM and ECM by being alerted to the threat and disrupting its radio waves instantly and globally. Integrated ESM body antennas are placed along the wing and tail flap of the fighter jet. [17] [59] [60]
The helmet-mounted display features a wide field of vision, binocular, multi-color display, voice recognition and 3-D sound. [25] [61]
To minimize its radar cross section, F-X physical design features serpentine air-ducts and an internal weapons bay. [62] Electromagnetic wave absorbers are applied to the air-ducts and engines to reduce the amount of radar reflection. The absorber is said to be of carbon-based material. According to results of tests conducted, the RCS reduction done from the absorbers has the equivalent effect of reducing detection range from radar threats by about half. [63] Metamaterials are also used to reflect radio waves. The metamaterials consists of various materials including small pieces of metals and dielectric. [64] The metamaterials are applied on the pulse doppler system as part of a radio wave reflection control technology on board the F-X. [65]
To avoid having its radar emissions detected, the F-X maximizes its usage of passive detection. Its sensor programs also operate its radar emissions in a way that reduces the likelihood of counter detection during radar emissions. [28]
The F-X uses plasma stealth antenna technology to deflect radio waves. The antenna operates by creating temporary plasma using characteristics of plasma that can change physical properties through electrical control. While activated the antenna is also capable of transmitting and receiving communication. [66]
Early in development the F-X was to be powered by two XF9 engines. In 2018, the officially publicized thrust level of the prototype engine was "11 tons (107 kN / 24,000 lbf) or more" in military thrust and "15 tons (147 kN / 33,000 lbf) or more" with afterburner. [67] The XF9 is designed to be adaptable to a wide range of thrust level, higher or lower, depending on requirement; [68] and the future fighter engine program is conducted with a target maximum thrust of 20 tons (196 kN / 44,000 lbf) in mind, which was unveiled at the ATLA Technology Symposium 2018. The XF9 possesses a high combustion temperature at 1800 °C. Noteworthy of the XF9 is its slim size relative to its power. For instance, the engine inlet of the XF9 is 30% smaller than the General Electric F110 used on the F-2. [62] The slim design is needed in order to accommodate weapons internally to preserve the aircraft's stealth. The XF9 has a large electrical power output of 180 kW, thus could have provided 360 kW combined from both of its engines. The large energy generation is needed to supply the fighter's powerful avionics and equipment. [69] The engines incorporate three dimensional thrust vector nozzles to allow the aircraft to achieve high maneuverability and improve stealth capabilities. The engine's thrust vector nozzle can deflect thrust up to 20 degrees in all circumference directions. [70]
December 2021 a memorandum was signed between Japan and the UK to co-operate on producing a joint demonstrator design for a sixth generation aircraft engine through engine manufacturers IHI and Rolls-Royce, a joint viability study had been underway for a while. Japan's defense ministry said efforts would commence in its next financial year, which began on April 1, 2022. [71] Later the Italian manufacturer Avio Aero joined as a partner on the engine development. [72]
The ASM-3 has been developed for the F-X to use as the F-2 gets phased out. [73] The F-X will be armed with a microwave weapon to disrupt incoming missiles. [18] The microwave weapon is activated from the stealth fighter's AESA radar through the use of electron tube amplifiers capable of high efficiency and miniaturization. [74]
Japan plans on introducing unmanned combat aerial vehicles that can operate alongside the F-X, called the Combat Support Unmanned Aircraft. The drone program is similar to the Kratos XQ-58 Valkyrie or Boeing Airpower Teaming System project in which the drone acts as a "loyal wingman" to the controlling aircraft. There are two versions of the drone: one that is a sensor carrier and scouts for targets, and another that fires munitions and directs incoming missiles away from the parent aircraft. Both versions share the same design as each other. The drones are expected to be fully developed by the 2030s. [75] [76]
Within Japan, the development of the X-2 and the F-X is seen as chance for Japan to revitalize its defense/aerospace industry and establish a foothold within the international arms market. [77] [78] [79] In the aftermath following World War II, Japan's defense and aerospace sector was crushed, forcing the nation to enter a long period of rebuilding. As a result, Japan mostly built US made aircraft under license to sustain its industry, while historically struggled to produce their own domestically design aircraft, both civilian and military alike. [77] [78] [80] The F-2 fighter in particular was widely controversial in Japan. First conceived as a 'pure' Japanese fighter, the F-2 was to incorporate the latest technology Japan had to offer and become a sort of spiritual successor to the famous Mitsubishi A6M Zero. However, the decision to joint-develop the aircraft with the US was later chosen due to a combination of US political pressure and the heavy undertaking of producing a fighter domestically. Combined with the delays and lack of profit and growth obtained for Japan's domestic industries, the F-2 went on to become an expensive, controversial fighter. [77] [78] [79] As such, with the introduction of the F-X, Japanese lawmakers and defense officials are adamant in avoiding a repeat of the F-2's controversial development.
Domestic development is generally favored the most by defense industry groups and lawmakers but the expected high cost and inexperience developing a domestic fighter are among the biggest challenges faced with domestic development. International collaboration is seen as another option with the benefit of easing the financial burden but can lead to difficulties in coordinating with the partner/s of the project. Furthermore, Japanese lawmakers are adamant that domestic companies should lead the project to secure profit and preserve the defense industry. [32] [81] Air Marshal B.K. Pandey, former Air Officer Commanding-in-Chief of Training Command of the Indian Air Force, noted that the F-X will likely face technological challenges as the technologies used in fighter jets have become more complex over the years. [80]
According to Gregg Rubinstein of Carnegie Endowment for International Peace, the US and Japan have differing approaches and priorities on joint-developing the stealth fighter. US defense officials emphasized that operational concepts and capability requirements should be the basis for fighter acquisition. In contrast, the Japanese officials have prioritized technology development and industrial base interest. In addition, the bitter legacy of the F-2 casts a shadow over discussions between the two countries. [82] In light of the F-2, there are concerns that Japan will be unable to have control of its partnership with the US. [83]
At the same time, military cooperation between the UK and Japan has expanded over the years. Discussions on joint-development between both countries have been described as "open-minded and flexible".[ citation needed ] Gregg Rubinstein has also noted that both countries have developed an interest in each other; noting that in a post-Brexit environment Britain will be looking beyond the EU for partners and Japan will desire to gain some independence from the US for its domestic industry.[ citation needed ] However, this increased cooperation elicited some reactions from the US. [82] In mid-April 2019, several reports indicated that the U.S. was willing to disclose portions of the F-35's software to Japan in exchange for joint development on the F-X fighter. These reports stated the offer was made in response to outdo 'rival' Britain in securing a deal with Japan. [84] [85] [86] According to the Financial Times, there were concerns among US officials that Japan would select BAE Systems as its international partner over US defense contractors. As a result, the Trump administration reportedly exerted political pressure on Japan to joint-develop the F-X with the US. There were concerns that selecting a British fighter jet would increase interoperability difficulties between it and the US military and US-made aircraft in Japan, thus complicating joint operations. Another was that selecting the UK would anger then-President Trump amidst a cost-sharing dispute regarding stationing US forces in Japan. [87] Nikkei Asian Review noted in 2020 that between choosing the UK or US as a partner, the UK would offer greater flexibility for Japan in developing the F-X while Japan still places high importance on its alliance with the US. [88] In early March 2020, a report from Nikkei Asian Review indicated that Japan planned on selecting the US for collaboration [89] despite the ongoing discussions between Japan and the US and UK at the time of the reporting. [90] While ATLA responded by stating that US and UK discussions were still ongoing, the report suggested that the US still has a strong influence over Japan because of their alliance. [91] On 25 August 2020, Japan's defense minister stated that "[Japan is] currently exchanging information with the US and UK to deepen our consideration of international co-operation in this development project." [92]
The development of the F-X allows Japan to catch up to and counter Russian and Chinese stealth fighters. [79] Within East Asia, the F-X allows Japan to not lag behind China and Russian stealth fighter production. [80]
The F-X was also designed primarily in response to concerns of Chinese, North Korean, and Russian military threats. Japan MoD considers China's rapid military buildup and disputes in the East and South China Sea as a primary security concern; along with North Korea's nuclear weapons program and Russia's increased military activities. [93] With regards to China, the F-X would likely be used to counter advanced Chinese fighter jets: Shenyang J-11, Chengdu J-20, and Shenyang FC-31. [80] Experts believe that the stealth jet would likely unnerve China to Japan's increased militarization. [94] [95]
Japan's development of the F-X, along with China, India and South Korea's stealth fighter programs, are noted as an increased trend of Asian aerospace industries challenging Western and Russian dominance in the global fighter jet industry. As of 2018, 90% of combat aircraft flown in all of the world's air forces comes from the US, USSR/Russia, Britain, France and Sweden. If the F-X (along with other fighter jets) is successfully designed then the focus of the fighter jet industry could shift from the Northern Atlantic closer to the Asia-Pacific. If it is exported, it could potentially become a serious challenge to the West's predominance in the fighter industry. [77] [78]
The Lockheed Martin F-35 Lightning II is an American family of single-seat, single-engine, supersonic stealth strike fighters. A multirole combat aircraft designed for both air superiority and strike missions, it also has electronic warfare and intelligence, surveillance, and reconnaissance capabilities. Lockheed Martin is the prime F-35 contractor with principal partners Northrop Grumman and BAE Systems. The aircraft has three main variants: the conventional takeoff and landing (CTOL) F-35A, the short take-off and vertical-landing (STOVL) F-35B, and the carrier-based (CV/CATOBAR) F-35C.
The Mitsubishi F-2 is a multirole fighter derived from the General Dynamics F-16 Fighting Falcon, and manufactured by Mitsubishi Heavy Industries and Lockheed Martin for the Japan Air Self-Defense Force, with a 60/40 split in manufacturing between Japan and the United States. The basis of the F-2's design is the F-16 Agile Falcon, an unsuccessful offer by General Dynamics to provide a low-cost alternative for the Advanced Tactical Fighter (ATF) competition. Production started in 1996 and the first aircraft entered service in 2000.
The Future Combat Air System (FCAS), is a European combat system of systems under development by Dassault Aviation, Airbus and Indra Sistemas. The FCAS will consist of a Next-Generation Weapon System (NGWS) as well as other air assets in the future operational battlespace. The NGWS's components will be remote carrier vehicles as well as a New Generation Fighter (NGF)—a planned sixth-generation jet fighter—that will possibly supersede France's Rafale and Germany and Spain's Typhoons.
The Japan Air Self-Defense Force, JASDF, also referred to as the Japanese Air Force, is the air and space branch of the Japan Self-Defense Forces, responsible for the defense of Japanese airspace, other air and space operations, cyberwarfare and electronic warfare. The JASDF carries out combat air patrols around Japan, while also maintaining a network of ground and air early-warning radar systems. The branch also has an aerobatic team known as Blue Impulse and has provided air transport in UN peacekeeping missions.
J-XXJ-X, and XXJ are names applied by Western intelligence agencies to describe programs by the People's Republic of China to develop one or more fifth-generation fighter aircraft. General He Weirong, Chief of Staff of the People's Liberation Army Air Force (PLAAF), stated that China had several such programs underway and that an undesignated fifth-generation fighter developed jointly by Chengdu Aerospace Corporation and Shenyang Aerospace Corporation would be in service by 2018.
The Advanced Medium Combat Aircraft (AMCA) is an Indian single-seat, twin-engine, all-weather fifth-generation stealth, multirole combat aircraft being developed for the Indian Air Force and the Indian Navy. The Mark-1 variant of the aircraft will be a fifth generation fighter while the Mark-2 variant will have sixth-generation technologies. The aircraft is designed by the Aeronautical Development Agency (ADA) - an aircraft design agency under MoD. A Special Purpose Vehicle (SPV) consisting of ADA, Hindustan Aeronautics Limited (HAL) and a private company is being formed for the development and production of AMCA. In March 2024, the project received approval from India's Cabinet Committee on Security for the prototype development.
The Mitsubishi X-2 Shinshin is a Japanese experimental aircraft for testing advanced stealth fighter aircraft technologies. It is being developed by the Japanese Ministry of Defense Technical Research and Development Institute (TRDI) for research purposes. The main contractor of the project is Mitsubishi Heavy Industries. Many consider this aircraft to be Japan's first domestically made stealth fighter. ATD-X is an abbreviation for "Advanced Technology Demonstrator – X". The aircraft is widely known in Japan as Shinshin although the name itself is an early code name within the Japan Self-Defense Forces and is not officially in use. The aircraft's first flight was on 22 April 2016.
The Type 10 is a Japan fourth generation main battle tank produced by Mitsubishi Heavy Industries for the Japanese Ground Self Defense Force. It entered service in 2012. Compared with other currently-serving main battle tanks in the JGSDF, the Type 10 is better equipped to deal with anti-tank weapons.
A fifth-generation fighter is a jet fighter aircraft classification which includes major technologies developed during the first part of the 21st century. As of 2024, these are the most advanced fighters in operation. The characteristics of a fifth-generation fighter are not universally agreed upon, and not every fifth-generation type necessarily has them all; however, they typically include stealth, low-probability-of-intercept radar (LPIR), agile airframes with supercruise performance, advanced avionics features, and highly integrated computer systems capable of networking with other elements within the battlespace for situational awareness and C3 (command, control and communications) capabilities.
A sixth-generation fighter is a conceptualized class of jet fighter aircraft design more advanced than the fifth-generation jet fighters that are currently in service and development. Several countries have announced the development of a national sixth-generation aircraft program, including the United States, Russia and China. Whilst other countries have joined collaborative multinational projects such as Japan, Italy and the United Kingdom with Global Combat Air Programme, and France, Germany and Spain with FCAS; in order to spread development and procurement costs. The first sixth-generation fighters are expected to enter service in the 2030s.
F/A-XX is a development and acquisition program for a future sixth-generation air superiority fighter to replace the United States Navy's F/A-18E/F Super Hornet and complement the F-35C beginning in the 2030s. A requirement was first identified in June 2008.
The Chengdu J-20, also known as Mighty Dragon, is a twin-engine all-weather stealth fighter developed by China's Chengdu Aerospace Corporation for the People's Liberation Army Air Force (PLAAF). The J-20 is designed as an air superiority fighter with precision strike capability. The aircraft has three notable variants: the initial production model, the revised airframe variant with new engines and thrust-vectoring control, and the aircraft-teaming capable twin-seat variant.
The Mitsubishi F-15J/DJ Eagle is a twin-engine, all-weather air superiority fighter based on the McDonnell Douglas F-15 Eagle in use by the Japan Air Self-Defense Force (JASDF). The F-15J was produced under license by Mitsubishi Heavy Industries. The subsequent F-15DJ and F-15J J-MSIP variants were also produced. Japan is the largest customer of the F-15 Eagle outside the United States. In addition to combat, F-15DJ roles include training. The F-15J Kai is a modernized version of the F-15J. Kai was an early designation that has gradually subdivided; nowadays, Japan no longer uses 'kai' to refer to newly upgraded F-15Js. Instead, Japanese predominantly use J-MSIP or F-15MJ.
The Type 12 surface-to-ship missile (12式地対艦誘導弾) is a truck-mounted anti-ship missile developed by Japan's Mitsubishi Heavy Industries in 2012. It is an upgrade of the Type 88 surface-to-ship missile. The Type 12 features INS with mid-course GPS guidance and better precision due to enhanced Terrain Contour Matching and target discrimination capabilities. The weapon is networked, where initial and mid-course targeting can be provided by other platforms, and also boasts shorter reload times, reduced lifecycle costs, and a range of 124 mi.
The Future Offensive Air System was a study to replace the Royal Air Force's strike capability, at the time provided by the Tornado GR4. Initial operational capability was expected around 2017. The FOAS was cancelled in June 2005 and was replaced by the Deep and Persistent Offensive Capability (DPOC) requirement, which was itself cancelled in the 2010 Strategic Defence and Security Review.
The BAE Systems Tempest is a proposed sixth-generation fighter aircraft that is under development in the United Kingdom for the Royal Air Force (RAF). The aircraft is intended to enter service from 2035, gradually replacing the Eurofighter Typhoon. It is being developed as part of the Future Combat Air System (FCAS) programme by a consortium known as Team Tempest, which includes the Ministry of Defence, BAE Systems, Rolls-Royce, Leonardo, and MBDA UK. £2 billion is planned to be spent by the British government on the initial phase of the project up to 2025.
The IHI XF9 is a low-bypass afterburning turbofan engine developed by the Acquisition, Technology & Logistics Agency (ATLA) of Ministry of Defense of Japan (MoD) and IHI Corporation.
The Fuji TACOM is an air-launched unmanned aerial vehicle developed by Fuji Heavy Industries. In 1995, the TACOM UAV was conceived as a platform to test and evaluate the technologies needed for an air-launched UAV for the Japan Air Self-Defense Force (JASDF). Although it was not designed for any specific mission, some missions that the TACOM could potentially undertake included intelligence, surveillance, target acquisition, reconnaissance, electronic warfare, decoy and aerial target.
The i3 Fighter is a conceptual jet fighter proposed by the Ministry of Defense of Japan in 2010 in association with development of the successor to the Mitsubishi F-2 fighter. The i3 stands for Informed, Intelligent and Instantaneous.
The Global Combat Air Programme (GCAP),, is a multinational initiative led by the United Kingdom, Japan, and Italy to jointly develop a sixth-generation stealth fighter. The programme aims to replace the Eurofighter Typhoon in service with both the Royal Air Force (RAF) and the Italian Air Force, and the Mitsubishi F-2 in service with the Japan Air Self-Defense Force.
{{cite web}}
: CS1 maint: multiple names: authors list (link){{cite news}}
: CS1 maint: others (link){{cite news}}
: CS1 maint: others (link){{cite news}}
: CS1 maint: others (link){{cite news}}
: CS1 maint: numeric names: authors list (link){{cite news}}
: CS1 maint: others (link){{cite news}}
: CS1 maint: others (link){{cite news}}
: CS1 maint: others (link)